Article

Ajayi, Oluseyi Moses, Odusanya, Kayode Abiodun and Ajayi, Olubusola Motunrayo (2014) A review essay on proactive approaches towards sustainable manufacturing engineering and service provision. Elixir International Journal: Sustainable Manufacturing Engineering, 67 . pp. 21676-21680. ISSN 2229-712X

Cheung, Chi Fai, Liu, Mingyu, Leach, Richard, Feng, Xiaobing and Zhao, Chenyang (2018) Hierarchical-information-based characterization of multiscale structured surfaces. CIRP Annals, 67 (1). pp. 539-542. ISSN 0007-8506

Dong, Jingtao, Hooshmand, Helia, Liu, Mingyu and Piano, Samanta (2023) Dynamic surface displacement measurement using carrier optical vortex interferometer: A numerical study. Optics and Lasers in Engineering . ISSN 0143-8166

Dowding, Colin, Griffiths, Jonathan David and Swainson, Mark (2018) Analytical prediction of laser mediated polymer melt and damage width. Procedia CIRP, 74 (2018). pp. 728-732. ISSN 2212-8271

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin, Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Guo, Pan, Liu, Mingyu, Xiong, Zhiwen and Zhang, Shaojian (2023) Scale effects on surface texture characterisation of ultra-precision diamond milling. Precision Engineering, 84 . ISSN 0141-6359

Guo, Pan, Liu, Mingyu, Zhang, Bowen, Li, Jintao, Xiong, Zhiwen, Piano, Samanta and Zhang, Shaojian (2023) Surface texture characterisation with reduced boundary effect for diamond-turned micro-structured surfaces. Precision Engineering, 79 . pp. 236-244. ISSN 0141-6359

Guo, Pan, Liu, Mingyu, Zhou, Yuanping, Xiong, Zhiwen, Zhang, Shaojian and To, Suet (2023) Two crucial suggestions on tool paths in slow-tool-servo diamond cutting of micro-structured functional surfaces. Journal of Manufacturing Processes, 95 . pp. 415-420. ISSN 1526-6125

Hao, Liang and Lawrence, Jonathan (2004) On the role of laser-induced microstructures in influencing the surface energy of magnesia partially stabilized zirconia bioceramic. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 218 (1). pp. 59-76. ISSN 0954-4054

Khan, M.D., Schaefer, D. and Milisavljevic-Syed, J. (2022) A Review of Distributed Ledger Technologies in the Machine Economy: Challenges and Opportunities in Industry and Research. Procedia CIRP, 107 . pp. 1168-1173. ISSN 2212-8271

Khan, M.D., Schaefer, Dirk and Milisavjlevid-Syed, J (2022) Supply Chain Management 4.0: Looking Backward, Looking Forward. Procedia CIRP, 107 . pp. 9-14. ISSN 2212-8271

Kwak, Sung Jo, Hasegawa, Tsutomu, Martinez Mozos, Oscar and Chung, Seong Youb (2014) Elimination of unnecessary contact states in contact state graphs for robotic assembly tasks. International Journal of Advanced Manufacturing Technology, 70 (9-12). pp. 1683-1697. ISSN 0268-3768

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Lawrence, Jonathan (2003) Identification of the principal elements governing the wettability characteristics of ordinary Portland cement following high power diode laser surface treatment. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 356 (1-2). pp. 162-172. ISSN 0921-5093

Lawrence, Jonathan (2002) On the potential role of the high power diode laser in modern dentistry. Independent Dentistry, 3 (1). pp. 34-36. ISSN 1466-0679

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

Lawrence, Jonathan (2004) Wetting and bonding characteristics of selected liquid-metals with a high power diode laser treated alumina bioceramic. Proceeding of the Royal Society (A): Mathematical, Physical & Engineering Sciences, 460 (2046). pp. 1723-1735. ISSN 1364-5021

Lawrence, Jonathan (2004) An analysis of the beam interaction characteristics of selected lasers with an alpha-alumina bioceramic. Optics and Lasers in Engineering, 41 (3). pp. 505-514. ISSN 0143-8166

Lawrence, Jonathan (2004) A comparative analysis of the wear characteristics of glazes generated on the ordinary Portland cement surface of concrete by means of CO2 and high power diode laser radiation. Wear, 257 (5-6). pp. 590-598. ISSN 0043-1648

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

Lawrence, Jonathan (2006) A high power diode laser (HPDL)-based technique for the bonding of composite patches to aluminium alloys on various military aircraft. Journal of Laser Applications, 18 (2). pp. 151-155. ISSN 1042-346X

Lawrence, Jonathan, Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

Lawrence, Jonathan, Johnston, Emma P. and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement. Journal of Physics D: Applied Physics, 33 (8). pp. 945-947. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2003) Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment. Journal of Materials Processing Technology, 142 (2). pp. 461-465. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (2001) Modification of the wettability characteristics of polymethyl methacrylate (PMMA) by means of CO2, Nd:YAG, excimer and high power diode laser radiation. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 303 (1-2). pp. 142-149. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2002) On the mechanisms of wetting characteristics modification for selected metallic materials by means of high power diode laser radiation. Journal of laser applications, 14 (2). pp. 107-113. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode laser and the effects of large beam geometry. Optics & Laser Technology, 31 (8). pp. 583-591. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of a modified mild steel with CO2, Nd:YAG, excimer and high power diode lasers. Journal of Physics D: Applied Physics, 32 (18). pp. 2311-2318. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of an Al2O3/SiO2-based ceramic modified with CO2, Nd:YAG, excimer and high-power diode lasers. Journal of Physics D: Applied Physics, 32 (10). p. 1075. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2001) Wettability characteristics of polyethylene (PE) modified with CO2, Nd:YAG, excimer and high power diode lasers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (12). pp. 1735-1744. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2001) The effects of process gas type on the surface condition of high power diode laser treated ordinary Portland cement. Optics and Lasers in Engineering, 36 (6). pp. 599-605. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2001) The influence of a high power diode laser (HPDL) generated glaze on the wetting characteristics and the subsequent HPDL enamelling of ordinary Portland cement. Surface and Coatings Technology, 137 (1). pp. 77-85. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2001) A laser-based technique for the coating of mild steel with a vitreous enamel. Surface & Coatings Technology, 140 (3). pp. 238-243. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Lawrence, Jonathan, Li, Lin, Edwards, Roger E. and Gale, Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Lawrence, Jonathan, Li, Lin, Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Lawrence, Jonathan, Li, Lin, Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

Lawrence, Jonathan, Li, Lin and Spencer, Julian (1999) Diode laser modification of ceramic material surface properties for improved wettability and adhesion. Applied Surface Science, 138-13 . pp. 388-393. ISSN 0169-4332

Lawrence, Jonathan, Li, Lin and Spencer, Julian (1999) High power diode laser modification of the wettability characteristics of an Al2O3/SiO2 based oxide compound for improved enamelling. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 266 (1-2). pp. 167-174. ISSN 0921-5093

Lawrence, Jonathan, Li, Lin and Spencer, Julian (1999) The effects of high power diode laser radiation on the wettability, adhesion and bonding characteristics of an alumina/silica-based oxide and vitreous enamel. Surface & Coatings Technology, 115 (2-3). pp. 273-281. ISSN 0257-8972

Lawrence, Jonathan, Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

Lawrence, Jonathan, Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence, Jonathan, Lubrani, Peter and Li, Lin (2001) On the selective deposition of tin and tin oxide on various glasses using a high power diode laser. Surface and Coatings Technology, 137 (2-3). pp. 235-240. ISSN 0257-8972

Lawrence, Jonathan, Minami, Kanaka, Li, Lin, Edwards, Roger E. and Gale, Andrew W. (2002) Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material. Applied Surface Science, 186 (1-4). pp. 162-165. ISSN 0169-4332

Lawrence, Jonathan, Minami, Kanaka, Schmidt, Marc J. J., Li, Lin, Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan, Peligrad, Alexandrou, Zhou, E., Li, Lin and Morton, D. (2001) Prediction of melt depth in selected architectural materials during high power diode laser treatment. Optics and Lasers in Engineering, 35 (1). pp. 51-62. ISSN 0143-8166

Lawrence, Jonathan, Schmidt, Marc J. J. and Li, Lin (2001) The forming of mild steel plates with a 2.5 kW high power diode laser. International Journal of Machine Tools & Manufacture: Design, Research and Application, 41 (7). pp. 967-977. ISSN 0890-6955

Lawrence, Jonathan, Schmidt, Marc J. J., Li, Lin, Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Li, Da, Cheung, Chi Fai, Wang, Bo and Liu, Mingyu (2018) A study of a priori knowledge-assisted multi-scopic metrology for freeform surface measurement. Procedia CIRP, 75 . pp. 337-342. ISSN 2212-8271

Li, J, Schaefer, D and Milisavljevic-Syed, J (2022) A Decision-Based Framework for Predictive Maintenance Technique Selection in Industry 4.0. Procedia CIRP, 107 . ISSN 2212-8271

Lim, Kok Chuan, Lawrence, Jonathan, Li, Lin, Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

Liu, Mingyu, Cheung, Chi Fai, Cheng, Ching-Hsiang and Lee, Wing Bun (2016) A gaussian process data modelling and maximum likelihood data fusion method for multi-sensor CMM measurement of freeform surfaces. Applied Sciences, 6 (12). p. 409. ISSN 2076-3417

Liu, Mingyu, Cheung, Chi Fai, Feng, Xiaobing and Wang, Chunjin (2019) Diamond machining of freeform-patterned surfaces on precision rollers. The International Journal of Advanced Manufacturing Technology, 103 . pp. 4423-4431. ISSN 0268-3768

Liu, Mingyu, Cheung, Chi Fai, Ren, Mingjun and Cheng, Ching-Hsiang (2015) Estimation of measurement uncertainty caused by surface gradient for a white light interferometer. Applied Optics, 54 (29). pp. 8670-8677. ISSN 1559-128X

Liu, Mingyu, Cheung, Chi Fai, Senin, Nicola, Wang, Shixiang, Su, Rong and Leach, Richard (2020) On-machine surface defect detection using light scattering and deep learning. JOSA A, 37 (9). B53-B59. ISSN 1084-7529

Liu, Qi, Cheng, Jian, Liao, Zhirong, Liu, Mingyu, Chen, Mingjun, Zhao, Linjie, Lei, Hongqin and Ding, Wenyu (2023) Fractal Analysis on Machined Surface Morphologies of Soft-Brittle KDP Crystals Processed by Micro Ball-End Milling. Materials, 16 (5). ISSN 1996-1944

Liu, Samuel M. Y., Cheung, Benny C. F., Whitehouse, David and Cheng, Ching-Hsiang (2016) An autonomous multisensor in situ metrology system for enabling high dynamic range measurement of 3D surfaces on precision machine tools. Measurement Science and Technology, 27 (11). p. 115015. ISSN 0957-0233

Milisavljevic-Syed, J, Thames, JL and Schaefer, D (2020) The Digitization of Design and Manufacturing: A State-of-the-Art Report on the Transition from Strategic Vision to Implementation in Industry. Procedia CIRP, 93 . pp. 575-580. ISSN 2212-8271

Pacella, Manuela, Jasmine St. John, Marah Grace, Dolatabadi, Nader and Badiee, Amir (2019) Microhardness and wear behaviour of polycrystalline diamond after warm laser shock processing with and without coating. International Journal of Refractory Metals and Hard Materials, 82 . pp. 215-226. ISSN 0263-4368

Pacella, Manuela, Nekouie, Vahid and Badiee, Amir (2019) Surface engineering of ultra-hard polycrystalline structures using a nanosecond Yb fibre laser: Effect of process parameters on microstructure, hardness and surface finish. Journal of Materials Processing Technology, 266 . pp. 311-328. ISSN 0924-1036

Progress, Hove-Sibanda, Bereng, Kgalalelo Confidence and Igwe, Paul (2020) Sustainability of Reverse Logistics as a source of firms’ competitive advantage in South Africa. European Journal of International Management . ISSN 1751-6765

Rossi, Emilio and Di Nicolantonio, Massimo (2020) Integrating Human-Centred Design Approach into Sustainable-Oriented 3D Printing Systems. Human-Intelligent Systems Integration, 2 (1). pp. 57-73. ISSN 2524-4876

Sani, S, Schaefer, D and Milisavljevic-Syed, J (2022) Strategies for Achieving Pre-emptive Resilience in Military Supply Chains. Procedia CIRP, 107 . ISSN 2212-8271

Shukla, Pratik (2014) Investigation into the high speed laser welding feasibility of tin-plated steels available for three-piece food packaging can manufacture. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture, 228 (7). pp. 715-729. ISSN 0954-4054

Shukla, Pratik, Swanson, Philip and Page, Colin (2014) Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: a review. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 228 (5). pp. 639-652. ISSN 0954-4054

Wang, Shixiang, Cheung, Chi Fai and Liu, Mingyu (2019) A fiducial-aided data fusion method for the measurement of multiscale complex surfaces. The International Journal of Advanced Manufacturing Technology, 103 . pp. 1381-1389. ISSN 0268-3768

Wang, Shixiang, Cheung, Chi Fai, Ren, Mingjun and Liu, Mingyu (2018) Fiducial-aided robust positioning of optical freeform surfaces. Micromachines, 9 (2). p. 52. ISSN 2072-666X

Wang, Shixiang, Cheung, Chifai, Ren, Mingjun and Liu, Mingyu (2018) Fiducial-aided on-machine positioning method for precision manufacturing of optical freeform surfaces. Optics Express, 26 (15). pp. 18928-18943. ISSN 1094-4087

Zhao, Chenyang, Cheung, Chi Fai and Liu, Samuel (2018) Nanoscale measurement with pattern recognition of an ultra-precision diamond machined polar microstructure. Precision Engineering, 56 . pp. 156-163. ISSN 0141-6359

de Oliveira, FB, Forbes, H, Schaefer, D and Syed, JM (2020) Lean Principles in Vertical Farming: A Case Study. Procedia CIRP, 93 . pp. 712-717. ISSN 2212-8271

Book Section

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

Gökşen, Gulden, Boyaci, Derya and Tucker, Nick (2022) Green and Smart Packaging of Food. In: Bioresource Technology: Concept, Tools and Experiences. Wiley. ISBN 978-1-119-78938-3

Hao, Liang and Lawrence, Jonathan (2003) Wettability characteristics modification of a magnesia partially stabilized zirconia using laser treatment and fundamental mechanism analysis. In: Recent Research Developments in Materials Science and Engineering. Transworld Research Network / Research Signpost, India, pp. 159-184. ISBN 9788178950570

Lawrence, Jonathan, Schmidt, M. J. J., Li, L., Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

Liu, M (2020) Scattering approaches. In: Advances in Optical Surface Texture Metrology. IOP Series in Emerging Technologies in Optics and Photonics . IOP Publishing. ISBN 9780750325288, 9780750325264, 9780750325295, 9780750325271

Tucker, Nick (2015) The development of electrospinning technologies for commercial application. In: Electrospinning : Principles, Practice and Possibilities. RSC Polymer Chemistry, 14 (14). RSC, Cambridge, pp. 34-56. ISBN 9781849735568, 9781849735575, 9781782625063

Tucker, Nick (2017) Clean production. In: Green composites: natural and waste based composites for a sustainable future. Woodhead Publishing Series in Composite Science and Engineering, 2nd Ed . Woodhead Publishing, Duxford, United Kingdom, pp. 95-120. ISBN 9780081007839

Waugh, David and Lawrence, Jonathan (2012) Laser surface processing of polymers for biomedical applications. In: Laser assisted fabrication of materials. Springer Series in Materials Science . Springer-Verlag, Berlin. ISBN 9783642283581

Conference or Workshop contribution

Chen, Shanshan, Cheung, Chi Fai, Zhang, Feihu and Liu, Mingyu (2018) A Study of Optimized Tool Path for Uniform Scallop-height in Ultra-precision Grinding of Freeform Surfaces. In: The 6th International Conference on nanoManufacturing (nanoMan2018).

Di Nicolantonio, Massimo and Rossi, Emilio (2020) The Human Integration into Sustainable 3D Printing Systems Part II: Design Experimentation. In: AHFE 2020, July 16–20, 2020, San Diego, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan (2008) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Hooshmand, Helia, Liu, Mingyu, Leach, Richard and Piano, Samanta (2022) Quantifying the validity conditions of the Beckmann-Kirchhoff scattering model. In: SPIE Optics + Photonics.

Hooshmand, Helia, Liu, Mingyu, Pappas, Athanasios, Thompson, Adam, Leach, Richard and Piano, Samanta (2023) Comparison of coherence scanning interferometry, focus variation and confocal microscopy for surface topography measurement. In: 23rd International conference of the European Society for Precision Engineering and Nanotechnology, 12 June to 16 June 2023, Copenhagen, Denmark.

Hooshmand, Helia, Liu, Mingyu, Su, Rong, Leach, Richard and Piano, Samanta (2022) Verification of the approximate Beckmann-Kirchhoff model on a series of sinusoidal profiles. In: euspen Special Interest Group Meeting: Structured & Freeform Surfaces.

Iqbal, Faiz, Semwal, Tushar and Stokes, Adam (2023) Cyber-Physical Systems based smart manufacturing of disinfectants: A need, and solution driven by COVID-19 Pandemic. In: FAIM 2023 Portugal, 18-22 June 2023, Porto Portugal.

Isakhani, Hamid, Yue, Shigang, Xiong, Caihua, Chen, Wenbin, Sun, Xuelong and liu, Tian (2020) Fabrication and Mechanical Analysis of Bioinspired Gliding-optimized Wing Prototypes for Micro Aerial Vehicles. In: 5th International Conference on Advanced Robotics and Mechatronics (ICARM), 18-21 Dec. 2020.

Koca, Ahmet, Liu, Mingyu and Leach, Richard (2022) Microstructure analysis of laser-based powder bed fusion surfaces. In: ASPE/euspen topical meeting on Advancing Precision in Additive Manufacturing.

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode lase. In: The 18th International Congress on Applications of Lasers and Electro-Optics (ICALEO �99), 15-18 November 1999, San Diego.

Lawrence, Jonathan, Li, Lin and Spencer, Julian T. (2006) Ceramic tile grout removal & sealing using high power lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

Lawrence, Jonathan, Li, Lin and Spencer, Julian T. (1998) Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics. In: The 17th International Congress on Applications of Lasers and Electro-Optics (ICALEO �98), 16-19 November 1998, Orlando.

Li, Lin, Lawrence, Jonathan and Spencer, Julian T. (1997) High power diode laser marking and engraving of building materials. In: Europto�97 Lasers in Material Processing, 16-20 June 1997, Munich.

Li, Lin, Lawrence, Jonathan and Spencer, Julian T. (1996) Laser materials processing with diode lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

Liu, M. Y., Cheung, C. F. and Ren, M. J. (2015) Characterization of directional features for precision surfaces using curvelet. In: American Society for Precision Engineering’s 30th Annual Meeting (ASPE).

Liu, M. Y., Cheung, C. F. and Ren, M. J. (2015) A study of Gaussian process and image registration based stitching for high dynamic range measurement of precision surfaces. In: The 6th International Conference of the Asian Society for Precision Engineering and Nanotechnology (ASPEN).

Liu, M. Y., Cheung, C. F. and Yang, S. M. (2017) Geometrical deviation induced measurement error of freeform surfaces for coordinate measuring machines. In: The 13th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII).

Liu, M. Y., Cheung, C. F. and Zhao, C. Y. (2016) Multi-sensor CMM measurement of freeform objects with sharp features. In: The 5th International Conference on Nanomanufacturing (nanoMan).

Liu, M. Y., Senin, N. and Leach, R. (2019) Surface characterisation with light scattering and machine learning. In: The 22nd International Conference on Metrology and Properties of Surfaces (Met&Props).

Liu, Mingyu (2019) AI-powered in-process surface measurement based on light scattering. In: Photonex Europe.

Liu, Mingyu, Cheung, Benny and Li, Ze (2016) A Gaussian process based data modelling and fusion method for multisensor coordinate measuring machines. In: 31st Annual Meeting of the American Society for Precision Engineering, ASPE 2016.

Liu, Mingyu, Cheung, Chi Fai and Chen, Shanshan (2016) A rotational stitching method for measuring cylindrical surfaces. In: 16th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2016.

Liu, Mingyu, Cheung, Chi Fai, Ren, Mingjun, Kong, Lingbao, Lee, Wing Bun, Cheng, Ching Hsiang and Xin, Chen (2014) A study of real-time spindle error compensation in single-point diamond turning of optical micro-structured patterns on precision rollers. In: Joint Meeting of the American Society for Precision Engineering (ASPE) and the Asian Society for Precision Engineering (ASPEN) on Manufacture and Metrology of Freeform and Off-Axis Aspheric Surfaces-2014 Summer Topical Meeting.

Liu, Mingyu, Cheung, Chi Fai and Yang, Shuming (2017) A study of extrapolation of freeform surfaces to improve the edge effect in surface filtering. In: ASPEN/ASPE 2017 Spring Topical Meeting on Manufacture and Metrology of Structured and Freeform Surfaces for Functional Applications.

Liu, Mingyu, Senin, Nicola and Leach, Richard (2022) Classification of PBF-LB surfaces using light scattering and machine learning: influence of scattering image resolution on classification accuracy and speed. In: ASPE/euspen topical meeting on Advancing Precision in Additive Manufacturing.

Liu, Mingyu, Senin, Nicola and Leach, Richard (2021) Fast measurement of metal laser powder bed fusion layer surfaces using light scattering and principal component analysis. In: euspen Advancing Precision in Additive Manufacturing.

Liu, Mingyu, Senin, Nicola and Leach, Richard (2021) Intelligent quality monitoring for additive manufactured surfaces by machine learning and light scattering. In: Optical Measurement Systems for Industrial Inspection XII.

Liu, Mingyu, Senin, Nicola and Leach, Richard (2022) Performance comparison of machine learning models for the characterisation of additive surfaces using light scattering. In: International Conference on Metrology and Properties of Surfaces.

Liu, Mingyu, Senin, Nicola, Su, Rong and Leach, Richard (2020) Cascaded machine learning model for reconstruction of surface topography from light scattering. In: Optics and Photonics for Advanced Dimensional Metrology.

Pacella, Manuela, Badiee, Amir and Ghosh, Piryanka (2019) Laser micro-nano texturing of a polycrystalline ultra-hard cutting tool to improve wear behaviour. In: SPIE LASE, 2019, San Francisco, California, United States.

Rossi, Emilio and Di Nicolantonio, Massimo (2020) The Human Integration into Sustainable 3D Printing Systems Part I: Methodological Setting and Human-System Integration Strategy. In: AHFE 2020, July 16–20, 2020, San Diego, CA, USA.

Rossi, Emilio, Di Nicolantonio, Massimo, Barcarolo, Paola and Lagatta, Jessica (2020) Sustainable 3D Printing: Design Opportunities and Research Perspectives. In: International Conference on Applied Human Factors and Ergonomics, 2019.

Vilalta-perdomo, Eliseo Luis (2015) El papel del Ingeniero Industrial en la formulación de políticas públicas. In: III Congreso Internacional de Química e Ingeniería Verde, UANL, 22-24 April 2015, Cintermex, Monterrey, Nuevo León, México.

Vilalta-perdomo, Eliseo Luis, Michel-Villarreal, Rosario and Corliss, John (2017) On defining 'sustainability'. An impossible task? In: IISE Annual Conference and Expo 2017, 20th - 23rd May, 2017, Pittsburgh.

Book or Monograph

Di Nicolantonio, Massimo, Rossi, Emilio and Alexander, Thomas, eds. (2020) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA. Advances in Intelligent Systems and Computing, 975 (1). Springer, Cham. ISBN 978-3-030-20215-6, 978-3-030-20216-3

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio, eds. (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

Mrugalska, Beata, Trzcielinski, Stefan, Karwowski, Waldemar, Di Nicolantonio, Massimo and Rossi, Emilio, eds. (2020) Advances in Manufacturing, Production Management and Process Control: Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16–20, 2020, USA. Advances in Intelligent Systems and Computing, 1216 . Springer, Cham. ISBN UNSPECIFIED

Trzcielinski, Stefan, Mrugalska, Beata, Karwowski, Waldemar, Rossi, Emilio and Di Nicolantonio, Massimo, eds. (2021) Advances in Manufacturing, Production Management and Process Control: Proceedings of the AHFE 2021 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 25-29, 2021, USA. Lecture Notes in Networks and Systems, 274 . Springer International Publishing. ISBN 9783030804619

Hao, Liang and Lawrence, Jonathan (2005) Laser surface treatment of bio-implant materials. John Wiley and Sons, Chichester. ISBN 9780470016879, 9780470033975 (online)

Lawrence, Jonathan and Li, Lin (2001) Laser modification of the wettability characteristics of engineering materials. Engineering Materials Series ERS Publication 3 . The Institution of Mechanical Engineers, Professional Engineering Publishing, London. ISBN 9781860582936

Lawrence, Jonathan and Low, David K. Y. (2006) Advances in laser materials processing research and applications. Trivandrum: Transworld Research Network. ISBN 8130800780

Lawrence, Jonathan, Pou, Juan, Low, David K. Y. and Toyserkani, Ehsan (2010) Advances in laser materials processing: Technology, research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746

Schaefer, Dirk (2014) Cloud-Based Design and Manufacturing (CBDM): A Service-Oriented Product Development Paradigm for the 21st Century. Springer. ISBN 978-3-319-07397-2, 978-3-319-34427-0

Thames, Lane J and Schaefer, Dirk (2017) Cybersecurity for Industry 4.0 Analysis for Design and Manufacturing. Springer Series in Advanced Manufacturing . Springer. ISBN 978-3-319-50659-3, 978-3-319-84456-5, 978-3-319-50660-9

Twigg, David and Voss, Christopher A. (1992) Managing Integration in CAD/CAM and Simultaneous Engineering: A Workbook. Chapman and Hall, London. ISBN UNSPECIFIED

Thesis

Liu, Mingyu (2018) A gaussian process-based multi-sensor metrology system for precision measurement of freeform surfaces. PhD thesis, Hong Kong Polytechnic University.

Patent

British Nuclear Fuels PLC; J.T. Spencer; L.Li; J. Lawrence (1999) A method of improving wettability and enamelling. .

British Nuclear Fuels PLC (1997) Grout or mortar removal by lasers. .