Items where Subject is "H321 Turbine Technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Number of items at this level: 64.

Article

Agbonzikilo, Festus, Owen, Ieuan, Sadasivuni, Suresh Kumar and Bickerton, Ronald A. (2015) Investigation of flow aerodynamics for optimal fuel placement and mixing in the radial swirler slot of a dry low emission gas turbine combustion chamber. Journal of Engineering for Gas Turbines and Power, 138 (5). 051505. ISSN 0742-4795

Agbonzikilo, Festus, Owen, Ieuan, Stewart, Jill, Sadasivuni, Suresh Kumar, Riley, Mike and Sanderson, Victoria (2015) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. Journal of Engineering for Gas Turbines and Power, 138 (6). ISSN 0742-4795

Effendy, M., Yao, Y., Yao, J. and Marchant, D. (2016) DES study of blade trailing edge cutback cooling performance with various lip-thicknesses. Applied Thermal Engineering, 99 . pp. 434-445. ISSN 1359-4311

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis (2019) DETACHED EDDY SIMULATION OF BLADE TRAILING-EDGE CUTBACK COOLING PERFORMANCE AT VARIOUS EJECTION SLOT ANGLES. International Journal of Heat and Fluid Flow, 80 (108487). ISSN 0142-727X

Griffiths, Jonathan David, Riley, Mike, Borman, Alexander, Dowding, Colin, Kirk, Antony and Bickerton, Ronald (2015) Effect of flow velocity and temperature on ignition characteristics in laser ignition of natural gas and air mixtures. Optics and Lasers in Engineering, 66 . pp. 132-137. ISSN 0143-8166

Jin, Seong-Ho, Joung, Jae-Hoon and Chung, Suk-Ho (2021) Self-excited noise generation from laminar methane/air premixed flames in thin annular jets. Experimental Thermal and Fluid Science, 122 . p. 110321. ISSN 0894-1777

Knowles, Grahame, Bingham, Chris and Bickerton, Ron (2021) An investigation into the balancing of high speed, flexible shafts by external application of compensating balancing sleeves. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science . ISSN 0954-4062

Knowles, Grahame, Kirk, Antony, Bingham, Chris and Bickerton, Ron (2018) Generalised analysis of compensating balancing sleeves with experimental results from a scaled industrial turbine coupling shaft. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 232 (19). pp. 3453-3468. ISSN 0954-4062

Maleki, Sepehr and Bingham, Chris (2019) Robust hierarchical clustering for novelty identification in sensor networks: With applications to industrial systems. Applied Soft Computing Journal, 85 . p. 105771. ISSN 1568-4946

Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2016) 2-D online changepoint detection algorithm for sensor-based fault detection. International Journal of Advances in Computer Science & Its Applications, 6 (1). pp. 109-114. ISSN 2250-3765

Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2016) Development and realisation of changepoint analysis for the detection of emerging faults on industrial systems. IEEE Transactions on Industrial Informatics, 12 (3). pp. 1180-1187. ISSN 1551-3203

Syawitri, T.P., Yao, Y.F., Chandra, B. and Yao, J. (2021) Comparison study of URANS and hybrid RANS-LES models on predicting vertical axis wind turbine performance at low, medium and high tip speed ratio ranges. Renewable Energy, 168 . pp. 247-269. ISSN 0960-1481

Syawitri, Taurista Perdana, Yao, Yu-Feng, Yao, Jun and Chandra, Budi (2020) The effect of gurney flap on flow characteristics of vertical axis wind turbine. International Journal of Modern Physics B, 34 (14n16). p. 2040107. ISSN 0217-9792

Syawitri, Taurista Perdana, Yao, Yufeng, Yao, Jun and Chandra, Budi (2020) Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine. International Journal of Numerical Methods for Heat & Fluid Flow, 31 (2). pp. 655-673. ISSN 0961-5539

Yao, Yufeng and Yao, Jun (2010) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 4 (2). pp. 242-248. ISSN 1755-9758

Yao, J., Yao, Y., Mason, P. J., Zhang, T., Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blade cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics, 23 (3). pp. 341-344. ISSN 0217-9849

Yao, Jun, Sian, Sohan, Yao, Yufeng and Davis, Tony W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B: Condensed Matter and Statistical Physics, 13 (24). pp. 1295-1298. ISSN 0217-9849

Yao, Jun and Yao, Yufeng (2011) Computational study of hole shape effect on film cooling performance. Journal of Power and Energy, 225 (4). pp. 505-519. ISSN 0957-6509

Zhang, Yu, Bingham, Chris and Maleki, Sepehr (2016) Measurement reconstruction in sensor networks for industrial systems. International Journal of Advances in Computer Science & Its Applications, 6 (1). pp. 105-108. ISSN 2250-376X

de Jesus Henriques, T. A., Tedds, S. C., Botsari, A., Najafian, G., Hedges, T. S., Sutcliffe, C. J., Owen, Ieuan and Poole, R. J. (2014) The effects of wave–current interaction on the performance of a model horizontal axis tidal turbine. International Journal of Marine Energy, 8 . pp. 17-35. ISSN 2214-1669

Book Section

Chen, Jun, Gallimore, Michael, Bingham, Chris, Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Maidi, M., Yao, Y. and Yao, Jun (2009) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: New trends in fluid mechanics research. Springer, pp. 416-419. ISBN 3540759948

Yao, J., Yao, Y., Mason, P. J., Zhang, T., Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

Conference or Workshop contribution

Agbonzikilo, Festus, Owen, Ieuan, Sadasivuni, Suresh Kumar and Bickerton, Ronald A. (2015) Investigation of flow aerodynamics for optimal fuel placement and mixing in the radial swirler slot of a dry low emission gas turbine combustion chamber. In: ASME Turbo Expo 2015, 15-19 June 2015, Montrèal, Canada.

Agbonzikilo, Festus, Stewart, Jill, Sadasivuni, Suresh Kumar, Owen, Ieuan, Riley, Mike and Sanderson, Victoria (2014) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. In: ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany.

Cruz-Manzo, Samuel, Maleki, Sepehr, Panov, Vili, Agbonzikilo, Festus and Zhang, Yu (2018) ANALYSIS OF PERFORMANCE OF A TWIN-SHAFT GAS TURBINE DURING HOT-END DAMAGE IN THE GAS GENERATOR TURBINE. In: Turbomachinery Technical Conference and Exposition, June 11-15, 2018, Oslo, Norway.

Cruz-Manzo, Samuel, Maleki, Sepehr, Panov, Vili, Agbonzikilo, Festus, Zhang, Yu and Latimer, Anthony (2018) Performance analysis of a twin-shaft gas turbine with fault in the variable stator guide vane system of the axial compressor. In: 9th International Gas Turbine Conference, 10-11 October 2018, Brussels, Belgium.

Effendy, M., Yao, Y. and Yao, J. (2013) Comparison study of turbine blade with trailing-edge cutback coolant ejection designs. In: 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 7-10 January 2013, Grapevine, TX.

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R (2019) Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade. In: The 5th International Conference on Engineering, Technology, and Industrial Application, 12-13 DECEMBER 2018, SURAKARTA, INDONESIA.

Gallimore, Michael, Yang, Zhijing, Bingham, Chris, Stewart, Paul, James, N., Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Kirk, Antony, Knowles, Grahame, Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Maleki, Sepehr and Bingham, Chris (2017) A one-class clustering technique for novelty detection and Isolation in sensor networks. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications, 26 - 28 June 2017, Annecy, France.

Maleki, Sepehr, Cruz-Manzo, Samuel, Bingham, Chris and Panov, Vili (2018) Performance analysis and prediction of compressor fouling condition for a twin-shaft engine. In: Global Power and Propulsion Forum, 10 -12 January 2018, Zurich.

Panov, Vili (2014) Auto-Tuning of Real-Time Dynamic Gas Turbine Models. In: ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, June 16–20, 2014, Düsseldorf, Germany.

Panov, Vili (2012) Distributed Network System for Real-Time Model Based Control of Industrial Gas Turbines. In: ASME 2011 Turbo Expo: Turbine Technical Conference and Exposition, June 6–10, 2011, Vancouver, British Columbia, Canada.

Panov, Vili (2015) GAS TURBINE PERFORMANCE DIAGNOSTICS AND FAULT ISOLATION BASED ON MULTIDIMENSIONAL COMPLEX HEALTH VECTOR SPACE. In: 11th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, 23 - 27 March 2015, Madrid, Spain.

Panov, Vili (2020) GAS TURBINE PERFORMANCE DIGITAL TWIN FOR REAL-TIME EMBEDDED SYSTEMS. In: ASME Turbomachinery Technical Conference and Exposition GT2020, 21-25, September , 2020, Virtual, Online.

Panov, Vili (2010) GASTURBOLIB – SIMULINK LIBRARY FOR GAS TURBINE ENGINE MODELLING. In: ASME Turbo Expo 2009: Power for Land, Sea, and Air, June 8–12, 2009, Orlando, Florida, USA.

Panov, Vili (2016) Integrated model-based control and health management for industrial gas turbines. In: 2016 IEEE International Conference on Prognostics and Health Management (ICPHM), 20 -22 June 2016, Ottawa, ON, CANADA.

Panov, Vili (2015) MODEL-BASED CONTROL AND DIAGNOSTIC TECHNIQUES FOR OPERATIONAL IMPROVEMENTS OF GAS TURBINE ENGINES. In: 10th European Conference on Turbomachinery Fluid dynamics & Thermodynamics, ETC10, April 15-19, 2013, Lappeenranta, Finland.

Panov, Vili (2010) Modelling and simulation of transient thermal loading in a gas turbine. In: 11th European Fluid Machinery Congress, 12 - 15 September 2010, Edinburg, UK.

Panov, Vili (2020) Quick Start of an Industrial Gas Turbine Engine through the Development of “Silent Start” VGV Schedule. In: Turbomachinery Technical Conference and Exposition GT2020, Online, Virtual.

Panov, Vili and Cruz-Manzo, Samuel (2021) Embedded, Edge and Cloud Computing for Gas Turbine Digital Twins. In: International Conference on Aviation Motors – ICAM 2020, May 18-21, 2021, Moscow, Russia.

Panov, Vili and Smith, M.K.D. (2009) NUMERICAL SIMULATION OF PARTIAL FLAME FAILURE IN GAS TURBINE ENGINE. In: ASME Turbo Expo 2007: Power for Land, Sea, and Air, May 14–17, 2007, Montreal, Canada.

Sian, S, Yao, J and Yao, Y (2010) Effect of hole shape on adiabatic cooling effectiveness. In: WCE 2009, July 2-4, 2009, Imperial College, London, UK.

Syawitria, T., Yao, Y.F., Chandra, B. and Yao, Jun (2019) CFD Simulation of Three-Straight-Bladed Vertical Axis Wind Turbine at Low Tip Speed Ratios. In: International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand, 4 - 5 October 2018, 4 - 5 October 2018, Thailand.

Yang, Zhijing, Bingham, Chris, Ling, Wing-Kuen, Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing, Bingham, Chris, Ling, Wing-Kuen, Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing, Ling, Wing-Kuen, Gallimore, Michael, Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

Yao, J., Yao, Y., Mason, P. and Zhang, T. (2008) CFD modeling of water injection flow for turbine blades cleaning. In: The Second International Symposium on Physics of Fluids (ISPF)2),, June, 2008, Nanjing, China.

Yao, J., Yao, Y., Mason, P. J., Zhang, T., Heyes, F. J. G. and Roach, P. E. (2008) CFD simulation of gas–water two-phase flow in turbocharger. In: Fifth International Conference on Computational Fluid Dynamics (ICCFD5), July 7 – 11, 2008, Seoul, South Korean.

Yao, J., Yao, Y., Mason, P. J., Zhang, T., Heyes, F. J. G. and Roach, P. E. (2007) Computational prediction of flow behaviour and energy losses in turbocharger. In: Proceeding of the Fifth International Conference on Fluid Mechanics, 15-19 August 2007, Shanghai, China.

Yao, Jun, Sian, Sohan, Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

Yao, Yufeng, Yao, Jun and Effendy, M. (2012) Evaluation of wall heat transfer in turbine blade trailing-edge passage. In: The 2nd Int. Conf. on Engineering and Technology Innovation, November 2012, Kaohsiung, Taiwan.

Zhang, Yu, Martinez, Miguel, Garlick, Mike, Latimer, Anthony and Cruz-Manzo, Samuel (2017) Condition monitoring of combustion system on industrial gas turbines based on trend and noise analysis. In: ASME TURBO EXPO 2017: Turbomachinery Technical Conference & Exposition, 26-30 June, 2017, Charlotte, NC USA.

Patent

Panov Vili - Siemens AG (2019) CONTROLLER AND METHOD. .

Panov Vili - Siemens AG (2017) CONTROLLING A GAS TURBINE CONSIDERING A SENSOR FAILURE. .

Panov Vili - Siemens AG (2015) ESTIMATION OF HEALTH PARAMETERS IN INDUSTRIAL GAS TURBINES. .

Panov Vili - Siemens AG (2019) GAS TURBINE CONTROLLER ADAPTED FOR TRANSIENT EVENTS. .

Panov Vili - Siemens AG (2008) METHOD OF DETECTING A PARTIAL FLAME FAILURE IN A GAS TURBINE ENGINE AND A GAS TURBINE ENGINE. .

Panov Vili - Siemens AG (2011) METHOD OF DETERMINING A COMBUSTOR EXIT TEMPERATURE AND METHOD OF CONTROLLING A GAS TURBINE. .

This list was generated on Sat Sep 23 05:46:02 2023 BST.