![]() | Up a level |
Constanzo, Andrea, Cavallo, Dario and McIlroy, Claire (2021) High-Performance Co-polyesters for Material-Extrusion 3D Printing: A Molecular Perspective of Weld Properties. Additive Manufacturing, 49 . ISSN 2214-8604
Panov, Vili (2006) Modelling of Behaviour of Metals at High Strain Rates. PhD thesis, Cranfield University.
Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one- and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270
Georgiades, Fotios (2018) Equilibrium Points with Their Associated Normal Modes Describing Nonlinear Dynamics of a Spinning Shaft with Non-constant Rotating Speed. Journal of Vibration Testing and System Dynamics, 2 (4). pp. 327-373. ISSN 2475-4811
Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one- and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.
Latalski, Jaroslaw, Georgiades, Fotios and Warminski, Jerzy (2012) Rational placement of a macro fibre composite actuator in composite rotating beams. Journal of Physics: Conference Series, 382 (1). p. 2021. ISSN 1742-6588
Constanzo, A, Poggi, A, Looijmans, S, Venkatraman, D, Sawyer, D, Puskar, L, McIlroy, Claire and Cavallo, D (2022) The role of molar mass in achieving isotropy and interlayer strength in Mat-Ex printed polylactic acid. Polymers, 14 (14). p. 2792. ISSN 2073-4360
Constanzo, Andrea, Cavallo, Dario and McIlroy, Claire (2021) High-Performance Co-polyesters for Material-Extrusion 3D Printing: A Molecular Perspective of Weld Properties. Additive Manufacturing, 49 . ISSN 2214-8604
Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one- and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.
Constanzo, Andrea, Cavallo, Dario and McIlroy, Claire (2021) High-Performance Co-polyesters for Material-Extrusion 3D Printing: A Molecular Perspective of Weld Properties. Additive Manufacturing, 49 . ISSN 2214-8604
Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one- and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica, 49 (8). pp. 1833-1858. ISSN 0025-6455
Panagopoulos, Panayotis, Georgiades, Fotios, Tsakirtzis, Stylianos, Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270
Borman, Alexander and Dowding, Colin (2021) Characterization of plasma formation and mass ejection in Exploding Foil Initiators. IEEE Transactions on Plasma Science, 49 (3). pp. 1159-1165. ISSN 0093-3813
Gilmer, E, Anderegg, D, Gardener, J, Sauti, G, Siochi, E, McKnight, S, Dillard, D, McIlroy, C and Bortner, M (2021) Temperature, diffusion and stress modeling in filament extrusion additive manufacturing of polyetheramide: An examination of the influence of processing parameters and the importance of modeling assumptions. Additive Manufacturing, 48 (Part A). p. 102412. ISSN 2214-8604
Borman, Alexander and Dowding, Colin (2021) Characterization of plasma formation and mass ejection in Exploding Foil Initiators. IEEE Transactions on Plasma Science, 49 (3). pp. 1159-1165. ISSN 0093-3813
Georgiades, Fotios, Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462
Georgiades, Fotios (2015) Towards the determination of a Nonlinear Campbell diagram of a spinning shaft with non-constant rotating speed. In: EuroMech, Colloquium-573, COUPLING AND NONLINEAR INTERACTIONS IN ROTATING MACHINERY, 25 - 27 August 2015, Lyon, France.
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica, 49 (8). pp. 1833-1858. ISSN 0025-6455
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2011) Mode shapes variation of a composite beam with piezoelectric patches. Transaction of Aviation Institute / Prace- Instytut Lotnictwa, 218 . pp. 36-43. ISSN 0509-6669
Georgiades, Fotios and Vakakis, Alexander, F. (2007) Dynamics of a linear beam with an attached local nonlinear energy sink. Communications in Nonlinear Science and Numerical Simulation, 12 (5). pp. 643-651. ISSN 1007-5704
Georgiades, Fotios and Vakakis, Alexander, F. (2007) Passive targeted energy transfers and strong modal interactions in a thin plate with strongly nonlinear end attachments of different configurations. ASME Proceedings | 21st Biennial Conference on Mechanical Vibration and Noise . pp. 1355-1370.
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
Georgiades, Fotios, Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270
Panagopoulos, Panayotis, Georgiades, Fotios, Tsakirtzis, Stylianos, Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683
Georgiades, Fotios (2015) Towards the determination of a Nonlinear Campbell diagram of a spinning shaft with non-constant rotating speed. In: EuroMech, Colloquium-573, COUPLING AND NONLINEAR INTERACTIONS IN ROTATING MACHINERY, 25 - 27 August 2015, Lyon, France.
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica, 49 (8). pp. 1833-1858. ISSN 0025-6455
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Matthew (2012) Linear modal analysis of L-shaped beam structures: parametric studies. Journal of Physics: Conference Series, 382 (1). p. 2006. ISSN 1742-6588
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270
Constanzo, A, Poggi, A, Looijmans, S, Venkatraman, D, Sawyer, D, Puskar, L, McIlroy, Claire and Cavallo, D (2022) The role of molar mass in achieving isotropy and interlayer strength in Mat-Ex printed polylactic acid. Polymers, 14 (14). p. 2792. ISSN 2073-4360
Constanzo, Andrea, Cavallo, Dario and McIlroy, Claire (2021) High-Performance Co-polyesters for Material-Extrusion 3D Printing: A Molecular Perspective of Weld Properties. Additive Manufacturing, 49 . ISSN 2214-8604
Panov, Vili (2006) Modelling of Behaviour of Metals at High Strain Rates. PhD thesis, Cranfield University.
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2011) Mode shapes variation of a composite beam with piezoelectric patches. Transaction of Aviation Institute / Prace- Instytut Lotnictwa, 218 . pp. 36-43. ISSN 0509-6669
Georgiades, Fotios (2015) Towards the determination of a Nonlinear Campbell diagram of a spinning shaft with non-constant rotating speed. In: EuroMech, Colloquium-573, COUPLING AND NONLINEAR INTERACTIONS IN ROTATING MACHINERY, 25 - 27 August 2015, Lyon, France.
Gilmer, E, Anderegg, D, Gardener, J, Sauti, G, Siochi, E, McKnight, S, Dillard, D, McIlroy, C and Bortner, M (2021) Temperature, diffusion and stress modeling in filament extrusion additive manufacturing of polyetheramide: An examination of the influence of processing parameters and the importance of modeling assumptions. Additive Manufacturing, 48 (Part A). p. 102412. ISSN 2214-8604
Panagopoulos, Panayotis, Georgiades, Fotios, Tsakirtzis, Stylianos, Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683
Georgiades, Fotios (2018) Equilibrium Points with Their Associated Normal Modes Describing Nonlinear Dynamics of a Spinning Shaft with Non-constant Rotating Speed. Journal of Vibration Testing and System Dynamics, 2 (4). pp. 327-373. ISSN 2475-4811
Georgiades, Fotios (2015) Towards the determination of a Nonlinear Campbell diagram of a spinning shaft with non-constant rotating speed. In: EuroMech, Colloquium-573, COUPLING AND NONLINEAR INTERACTIONS IN ROTATING MACHINERY, 25 - 27 August 2015, Lyon, France.
Georgiades, Fotios, Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462
Georgiades, Fotios, Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462
Georgiades, Fotios (2015) Towards the determination of a Nonlinear Campbell diagram of a spinning shaft with non-constant rotating speed. In: EuroMech, Colloquium-573, COUPLING AND NONLINEAR INTERACTIONS IN ROTATING MACHINERY, 25 - 27 August 2015, Lyon, France.
Panagopoulos, Panayotis, Georgiades, Fotios, Tsakirtzis, Stylianos, Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683
Georgiades, Fotios (2018) Equilibrium Points with Their Associated Normal Modes Describing Nonlinear Dynamics of a Spinning Shaft with Non-constant Rotating Speed. Journal of Vibration Testing and System Dynamics, 2 (4). pp. 327-373. ISSN 2475-4811
Georgiades, Fotios and Vakakis, Alexander, F. (2007) Dynamics of a linear beam with an attached local nonlinear energy sink. Communications in Nonlinear Science and Numerical Simulation, 12 (5). pp. 643-651. ISSN 1007-5704
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
Panov, Vili (2006) Modelling of Behaviour of Metals at High Strain Rates. PhD thesis, Cranfield University.
Borman, Alexander and Dowding, Colin (2021) Characterization of plasma formation and mass ejection in Exploding Foil Initiators. IEEE Transactions on Plasma Science, 49 (3). pp. 1159-1165. ISSN 0093-3813
Gilmer, E, Anderegg, D, Gardener, J, Sauti, G, Siochi, E, McKnight, S, Dillard, D, McIlroy, C and Bortner, M (2021) Temperature, diffusion and stress modeling in filament extrusion additive manufacturing of polyetheramide: An examination of the influence of processing parameters and the importance of modeling assumptions. Additive Manufacturing, 48 (Part A). p. 102412. ISSN 2214-8604
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica, 49 (8). pp. 1833-1858. ISSN 0025-6455
Georgiades, Fotios (2018) Equilibrium Points with Their Associated Normal Modes Describing Nonlinear Dynamics of a Spinning Shaft with Non-constant Rotating Speed. Journal of Vibration Testing and System Dynamics, 2 (4). pp. 327-373. ISSN 2475-4811
Georgiades, Fotios (2015) Towards the determination of a Nonlinear Campbell diagram of a spinning shaft with non-constant rotating speed. In: EuroMech, Colloquium-573, COUPLING AND NONLINEAR INTERACTIONS IN ROTATING MACHINERY, 25 - 27 August 2015, Lyon, France.
Georgiades, Fotios and Vakakis, Alexander, F. (2007) Passive targeted energy transfers and strong modal interactions in a thin plate with strongly nonlinear end attachments of different configurations. ASME Proceedings | 21st Biennial Conference on Mechanical Vibration and Noise . pp. 1355-1370.
Panov, Vili (2006) Modelling of Behaviour of Metals at High Strain Rates. PhD thesis, Cranfield University.
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica, 49 (8). pp. 1833-1858. ISSN 0025-6455
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica, 49 (8). pp. 1833-1858. ISSN 0025-6455
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica, 49 (8). pp. 1833-1858. ISSN 0025-6455
Constanzo, A, Poggi, A, Looijmans, S, Venkatraman, D, Sawyer, D, Puskar, L, McIlroy, Claire and Cavallo, D (2022) The role of molar mass in achieving isotropy and interlayer strength in Mat-Ex printed polylactic acid. Polymers, 14 (14). p. 2792. ISSN 2073-4360
Constanzo, Andrea, Cavallo, Dario and McIlroy, Claire (2021) High-Performance Co-polyesters for Material-Extrusion 3D Printing: A Molecular Perspective of Weld Properties. Additive Manufacturing, 49 . ISSN 2214-8604
Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270
Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604
Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413
Georgiades, Fotios, Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
Georgiades, Fotios, Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica, 49 (8). pp. 1833-1858. ISSN 0025-6455
Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604
Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683