A

Ahmed, Salem K. Brini, Aliyu, Aliyu M., Baba, Yahaya D., Abdulkadir, Mukhtar, Abdulhadi, Rahil Omar, Lao, Liyun, Yeung, Hoi, UNSPECIFIED and UNSPECIFIED (2022) Comparative Analysis of Riser Base and Flowline Gas Injection on Vertical Gas-Liquid Two-Phase Flow. Energies, 15 (19). p. 7446. ISSN 1996-1073

Al-Ansari, A. D. and Owen, I. (1999) Thermal and hydrodynamic analysis of the condensation and evaporation processes in horizontal tube desalination plant. International Journal of Heat and Mass Transfer, 42 (9). pp. 1633-1644. ISSN 0017-9310

Al-Azzawi, H. K. and Owen, I. (1984) Measuring the thermal conducitivity of uranin. International Journal of Heat and Fluid Flow, 5 (1). pp. 57-59. ISSN 0142-727X

Alhassan, Musa I., Aliyu, Aliyu, Mishra, Rakesh, Mian, Naeem. S., UNSPECIFIED and UNSPECIFIED (2022) Air Quality Management in Railway Coaches. In: ICMIAM 2021, 12-15 December 2021, Ballarat, Australia.

Aliyu, Aliyu (2016) Vertical annular gas-liquid two-phase flow in large diameter pipes. PhD thesis, Cranfield University.

Aliyu, Aliyu M., Almabrok, Almabrok A., Baba, Yahaya D., Archibong, Archibong-Eso, Lao, Liyun, Yeung, Hoi, Kim, Kyung Chun, UNSPECIFIED and UNSPECIFIED (2017) Prediction of entrained droplet fraction in co-current annular gas–liquid flow in vertical pipes. Experimental Thermal and Fluid Science, 85 . pp. 287-304. ISSN 0894-177

Aliyu, Aliyu M., Choudhury, Raihan, Sohani, Behnaz, Atanbori, John, Ribeiro, Joseph X. F., Ahmed, Salem K. Brini and Mishra, Rakesh (2023) An artificial neural network model for the prediction of entrained droplet fraction in annular gas-liquid two-phase flow in vertical pipes. International Journal of Multiphase Flow . p. 104452. ISSN 1879-3533

Aliyu, Aliyu M., Seo, Hyunduk, Xu, Yang, Wang, Jin-Jun and Kim, Kyung Chun (2018) A model for rising bubbles interacting with crossflowing liquid. International Journal of Multiphase Flow, 108 . pp. 94-104. ISSN 0301-9322

Aliyu, Aliyu M., Singh, Dharminder, Uzoka, Chino, Mishra, Rakesh, UNSPECIFIED and UNSPECIFIED (2021) Dispersion of virus-laden droplets in ventilated rooms: Effect of homemade facemasks. Journal of Building Engineering, 44 . p. 102933. ISSN 2352-7102

Aliyu, Aliyu Musa, Kim, Yoon Kee, Choi, Seong Hwan, Ahn, Joo Ha, Kim, Kyung Chun, UNSPECIFIED and UNSPECIFIED (2017) Development of a dual optical fiber probe for the hydrodynamic investigation of a horizontal annular drive gas/liquid ejector. Flow Measurement and Instrumentation, 56 . pp. 45-55. ISSN 0955-5986

Aliyu, Muhammad, Aliyu, Aliyu, Mishra, Rakesh and UNSPECIFIED (2022) Management of fuel consumption and emissions of heavy goods trucks. In: ICMIAM 2021, 12-15 December 2021, Ballarat, Australia.

Allarton, Richard, Yao, Jun, Clifford, Tyler, Hitchborn, Benjamin, Parker, Liam J and Shaw, Joshua (2020) Surface flow modification of aerofoils for automotive racing car applications. International Journal of Modern Physics B, 34 (14n16). p. 2040096. ISSN 0217-9792

Altwieb, Miftah, Mishra, Rakesh, Aliyu, Aliyu M., Kubiak, Krzysztof J., UNSPECIFIED and UNSPECIFIED (2022) Heat Transfer Enhancement by Perforated and Louvred Fin Heat Exchangers. Energies, 15 (2). p. 400. ISSN 1996-1073

Amini, A. and Owen, I. (1995) The use of critical flow venturi nozzles with saturated wet steam. Flow Measurement and Instrumentation, 6 (1). pp. 41-47. ISSN 0955-5986

Archibong-Eso, A., Aliyu, A. M., Yan, W., Okeke, N. E., Baba, Y. D., Fajemidupe, O., Yeung, H., UNSPECIFIED and UNSPECIFIED (2020) Experimental Study on Sand Transport Characteristics in Horizontal and Inclined Two-Phase Solid-Liquid Pipe Flow. Journal of Pipeline Systems Engineering and Practice, 11 (1). 04019050. ISSN 1949-1190

Archibong-Eso, A., Okeke, N.E., Baba, Y., Aliyu, A.M., Lao, L., Yeung, H., UNSPECIFIED and UNSPECIFIED (2019) Estimating slug liquid holdup in high viscosity oil-gas two-phase flow. Flow Measurement and Instrumentation, 65 . pp. 22-32. ISSN 0955-5986

Archibong-Eso, Archibong, Baba, Yahaya, Aliyu, Aliyu, Ribeiro, Joseph, Abam, Fidelis, Yeung, Hoi, UNSPECIFIED and UNSPECIFIED (2021) Particle-Transport Mechanism in Liquid/Liquid/Solid Multiphase Pipeline Flow of High-Viscosity Oil/Water/Sand. SPE Journal, 26 (5). pp. 2977-2992. ISSN 1086-055X

Arifin, R. R., James, S. C., de Alwis Pitts, D. A., Hamlet, A. F., Sharma, A. and Fernando, H. J. S. (2016) Simulating the thermal behavior in Lake Ontario using EFDC. Journal of Great Lakes Research, 42 (3). pp. 511-523. ISSN 0380-1330

Aris, M. S., Owen, I. and Sutcliffe, C. J. (2011) The development of active vortex generators from shape memory alloys for the convective cooling of heated surfaces. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3566-3574. ISSN 0017-9310

Aris, Mohd S., Owen, Ieuan and Sutcliffe, Chris J. (2007) The application of shape memory alloy as vortex generators and flow control devices for enhanced convective heat transfer. In: 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007, July 30–August 2, 2007, San Diego, California, USA.

Aris, Mohd S., Owen, Ieuan and Sutcliffe, Chris J. (2008) The development of active flow control devices from shape memory alloys for the convective cooling of heated surfaces. In: ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, 31 October 2008 - 6 November 2008;, Boston, Massachusetts, USA.

B

Baba, Y D, Archibong-Eso, Archibong, Aliyu, Aliyu, Ribeiro, J X F, Lao, Liyun, Yeung, Hoi, UNSPECIFIED, UNSPECIFIED, UNSPECIFIED and UNSPECIFIED (2019) Slug Translational Velocity for Highly Viscous Oil and Gas Flows in Horizontal Pipes. Fluids, 4 (3). p. 170. ISSN 2311-5521

Baba, Yahaya D., Chat, Amina. S, Aliyu, Aliyu M., Okereke, Ndubuisi N., Ogunyemi, Adebayo, Owolabi, John O., UNSPECIFIED and UNSPECIFIED (2019) Study of High Viscous Multiphase Flow Using OLGA Flow Simulator. FUOYE Journal of Engineering and Technology, 4 (2). ISSN 2579-0617

Baba, Yahaya D., Ribeiro, Joseph X.F., Aliyu, Aliyu, Archibong-Eso, Archibong, Abubakar, Umar D. and Ehinmowo, Adegboyega B. (2020) Characteristics of horizontal gas-liquid two-phase flow measurement in a medium-sized pipe using gamma densitometry. Scientific African, 10 . e00550. ISSN 2468-2276

Berdalet, Elisa, Peters, Francesc, Koumandou, V. Lila, Roldan, Cristina, Guadayol, Oscar and Estrada, Marta (2007) Species-specific physiological response of dinoflagellates to quantified small-scale turbulence. Journal of Phycology, 43 (5). pp. 965-977. ISSN 0022-3646

Boretti, Alberto, Jin, Seong-Ho, Zakis, George, Brear, Michael, Attard, William, Watson, Harry, Carlisle, H. and Bryce, W. (2007) Experimental and numerical study of an air assisted fuel injector for a D.I.S.I. engine. In: 2007 SAE World Congress, April 16-19, 2007, Detroit, Michigan.

Boretti, Alberto, Jin, Seong-Ho, Brear, Michael, Zakis, George, Watson, Harry and Brewster, Simon (2008) Experimental and numerical study of a spark ignition engine with air-assisted direct injection. Proceedings of the IMechE, Part D: Automobile Engineering, 222 (6). pp. 1103-1119. ISSN 0954-4070

Brini Ahmed, Salem K, Aliyu, Aliyu M., Baba, Yahaya D., Omar Abdulhadi, Rehil and Yeung, Hoi (2022) Assessment of Coriolis meters as instrumentation for gas void fraction measurement in air–liquid multiphase flow in a pipeline riser system. In: 2022 IEEE 2nd International Maghreb Meeting of the Conference on Sciences and Techniques of Automatic Control and Computer Engineering (MI-STA), 23-25 May, 2022, Sabratha, Libya.

Buyruk, E., Barrow, H. and Owen, I. (1999) Heat transfer in laminar flow in a concentric annulus with peripherally varying heat transfer. International Journal of Heat and Mass Transfer, 42 (3). pp. 487-496. ISSN 0017-9310

Buyruk, E., Johnson, M. W. and Owen, I. (1998) Numerical and experimental study of flow and heat transfer around a tube in cross-flow at low Reynolds number. International Journal of Heat and Fluid Flow, 19 (3). pp. 223-232. ISSN 0142-727X

C

Carty, S., Owen, I., Bastow, B. and Steen, W. M. (1994) Powder flow from novel nozzle design for laser cladding and alloying. In: 1994 Conference on Lasers and Electro-Optics Europe, 28 August - 2 September 1994, RAI Congress Centre, Amsterdam, The Netherlands.

Castagna, J., Yao, Y. and Yao, J. (2012) Numerical simulation of a turbulent flow over an axisymmetric hill. In: The 50th AIAA Aerospace Sciences Meeting, 9 - 12 Jan 2012, 9 - Gaylord Opryland Resort & Convention Center, Nashville, Tennessee.

Castagna, Jony, Yao, Yufeng and Yao, Jun (2014) Direct numerical simulation of a turbulent flow over an axisymmetric hill. Computers & Fluids, 95 . pp. 116-126. ISSN 0045-7930

Chen, Lumin, Liu, Kaixuan, Yao, Yufeng, Yao, Jun, Su, Zixue and Luo, Guofo (2020) Flow analysis in right-angled pipes with different geometric shapes and parameters for sludge discharge in slime shield machines measured using a CFD-DEM method. Journal International Journal for Computational Methods in Engineering Science and Mechanics, 21 (5). pp. 231-242. ISSN 1550-2287

Constanzo, A, Poggi, A, Looijmans, S, Venkatraman, D, Sawyer, D, Puskar, L, McIlroy, Claire and Cavallo, D (2022) The role of molar mass in achieving isotropy and interlayer strength in Mat-Ex printed polylactic acid. Polymers, 14 (14). p. 2792. ISSN 2073-4360

Constanzo, Andrea, Cavallo, Dario and McIlroy, Claire (2021) High-Performance Co-polyesters for Material-Extrusion 3D Printing: A Molecular Perspective of Weld Properties. Additive Manufacturing, 49 . ISSN 2214-8604

D

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

Das, A, Riat, J.A., Bortner, A and McIlroy, Claire (2022) Rheology, crystallization, and process conditions: The effect on interlayer properties in three-dimensional printing. Physics of Fluids, 34 . p. 123108. ISSN 1070-6631

Davis, I. S., Shachar-Hill, B., Curry, M. R., Kim, K. S., Pedley, T. J. and Hill, A. E. (2007) Osmosis in semi-permeable pores: an examination of the basic flow equations based on an experimental and molecular dynamics study. Proceeding of the Royal Society (A): Mathematical, Physical & Engineering Sciences, 463 (2079). pp. 881-896. ISSN 1471-2946

E

Effendy, Marwan, Yao, Yufeng and Yao, Jun (2013) Comparison study of turbine blade with trailing–edge cutback coolant ejection designs. In: The 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 07 - 10 January 2013, Grapevine (Dallas/Ft. Worth Region) Texas.

Effendy, M., Yao, Y., Yao, J. and Marchant, D. (2016) DES study of blade trailing edge cutback cooling performance with various lip-thicknesses. Applied Thermal Engineering, 99 . pp. 434-445. ISSN 1359-4311

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis (2019) DETACHED EDDY SIMULATION OF BLADE TRAILING-EDGE CUTBACK COOLING PERFORMANCE AT VARIOUS EJECTION SLOT ANGLES. International Journal of Heat and Fluid Flow, 80 (108487). ISSN 0142-727X

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R (2019) Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade. In: The 5th International Conference on Engineering, Technology, and Industrial Application, 12-13 DECEMBER 2018, SURAKARTA, INDONESIA.

Elgeneidy, Khaled, Al-Yacoub, Ali, Usman, Zahid, Lohsa, Niels, jackson, Michael and Wright, Iain (2018) Towards an automated masking process: A model-based approach. Journal of Engineering Manufacture . ISSN 0954-4054

Ellington, Charles P., Van Den Berg, Coen, Willmott, Alexander P. and Thomas, Adrian L. R. (1996) Leading-edge vortices in insect flight. Nature, 384 . pp. 626-630. ISSN 0028-0836

F

Fajemidupe, Olawale T., Aliyu, Aliyu M., Baba, Yahaya D., Archibong-Eso, Archibong and Yeung, Hoi (2019) Sand minimum transport conditions in gas–solid–liquid three-phase stratified flow in a horizontal pipe at low particle concentrations. Chemical Engineering Research and Design, 143 . pp. 114-126. ISSN 0263-8762

Fisk, J D and Boyle, J D (2000) Electrolytic Toxic Metal Removal from Effluents using Reticulated Vitreous Carbon. Transactions of the IMF - The International Journal of Surface Engineering and Coatings, 78 (3). pp. 113-119. ISSN 0020-2967

Forrest, J. S., Hodge, S. J., Owen, I. and Padfield, G. D. (2008) An investigation of ship airwake phenomena using time-accurate CFD and piloted helicopter flight simulation. In: 34th European Rotorcraft Forum 2008, ERF34, 16 - 19 September 2008, Liverpool, UK.

Forrest, James S., Hodge, Steven J., Owen, Ieuan and Padfield, Gareth D. (2008) Towards fully simulated ship-helicopter operating limits: the importance of ship airwake fidelity. In: 64th Annual Forum - AHS International, 29 April 2008 - 1 May 2008, Montreal, Canada.

Fyrippi, I., Owen, I. and Escudier, M. P. (2004) Flowmetering of non-Newtonian liquids. Flow Measurement and Instrumentation, 15 (3). pp. 131-138. ISSN 0955-5986

G

Gilmer, E, Anderegg, D, Gardener, J, Sauti, G, Siochi, E, McKnight, S, Dillard, D, McIlroy, C and Bortner, M (2021) Temperature, diffusion and stress modeling in filament extrusion additive manufacturing of polyetheramide: An examination of the influence of processing parameters and the importance of modeling assumptions. Additive Manufacturing, 48 (Part A). p. 102412. ISSN 2214-8604

Gray, J. D., Owen, I. and Escudier, M. P. (2001) An experimental study of the effects of non-Newtonian blood rheology in a large scale model of a distal anastomosis. In: 2001 ASME International Mechanical Engineering Congress and Exposition, 11 - 16 November 2001, New York, New York.

Guadayol, Oscar, Peters, Francesc, Stiansen, Jan Erik, Marrase, Celia and Lohrmann, Atle (2009) Evaluation of oscillating grids and orbital shakers as means to generate isotropic and homogeneous small-scale turbulence in laboratory enclosures commonly used in plankton studies. Limnology and Oceanography: Methods, 7 (4). pp. 287-303. ISSN 1541-5856

H

Hield, Peter, Brear, Michael and Jin, Seong-Ho (2009) Thermoacoustic limit cycles in a premixed laboratory combustor with open and choked exits. Combustion and Flame, 156 (9). pp. 1683-1697. ISSN 0010-2180

Hoath, Stephen D., Castrejón-Pita, José Rafael, Hsiao, Wen-Kai, Jung, Sungjune, Martin, Graham D., Hutchings, Ian M., Tuladhar, Tri R., Vadillo, Damien C., Butler, Simon A., Mackley, Malcolm R., McIlroy, Claire, Morrison, Neil F., Harlen, Oliver G. and Yow, Huai Nyin (Grace) (2013) Jetting of Complex Fluids. Journal of Imaging Science and Technology, 57 (4). pp. 1-10. ISSN 1062-3701

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

Horikiri, K., Yao, Y. and Yao, Jun (2012) Numerical study of unsteady airflow phenomena in a ventilated room. In: ICHMT Int. Symp. On Advances in Computational Heat Transfer, July 1, 2012, Bath, UK.

Horikiri, Kana, Yao, Yufeng and Yao, Jun (2015) Numerical optimisation of thermal comfort improvement for indoor environment with occupants and furniture. Energy and Buildings, 88 . pp. 303-315. ISSN 0378-7788

Horikiri, Kana, Yao, Yufeng and Yao, Jun (2011) Numerical simulation of convective airflow in an empty room. International Journal of Energy and Environment, 5 (1). pp. 574-581. ISSN 1109-9577

Horikiria, Kana, Yao, Yufeng and Yao, Jun (2014) Modelling conjugate flow and heat transfer in a ventilated room for indoor thermal comfort assessment. Building and Environment, 77 . pp. 135-147. ISSN 0360-1323

Huang, J., Cao, Y., Yao, Y. and Yao, J. (2016) Multistep simulation for three-dimensional ice accretion on an aircraft wing. In: 54th AIAA Aerospace Sciences Meeting: AIAA, 4 - 8 January 2016, San Diego, California, USA.

Hussein, I. B., Owen, I. and Amini, A. M. (1992) Energy metering system for high quality saturated steam. Flow Measurement and Instrumentation, 3 (4). pp. 235-240. ISSN 0955-5986

Hussein, I.B. and Owen, I. (1991) Calibration of flowmeters in superheated and wet steam. Flow Measurement and Instrumentation, 2 (4). pp. 209-215. ISSN 0955-5986

I

Isakhani, Hamid, Xiong, Caihua, Chen, Wenbin and Yue, Shigang (2021) Towards locust-inspired gliding wing prototypes for micro aerial vehicle applications. Royal Society Open Science, 8 (6). p. 202253. ISSN 2054-5703

Isakhani, Hamid, Xiong, Caihua, Yue, Shigang and Chen, Wenbin (2020) A Bioinspired Airfoil Optimization Technique Using Nash Genetic Algorithm. In: 2020 17th International Conference on Ubiquitous Robots (UR), 22-26 June 2020, Kyoto, Japan.

Isakhani, Hamid, Yue, Shigang, Xiong, Caihua and Chen, Wenbin (2021) Aerodynamic Analysis and Optimization of Gliding Locust Wing Using Nash Genetic Algorithm. AIAA Journal, 59 (10). pp. 4002-4013. ISSN 0001-1452

J

Jenkinson, Ian R., Berdalet, Elisa, Chin, Wie-Chun, Herminghaus, Stephan, Leterme, Sophie, Mitchell, James G., Orchard, Michael, Qiu, Ri, Seuront, Laruent, Wang, Peng, Wyatt, Tim and Zhuo, Li (2014) Micro- and nano-fluidics around HAB cells. In: 16th ICHA Conference, 27 - 31 October 2014, Wellington, New Zealand.

Jin, Seong-Ho (2019) Advanced sensing combustion dynamics and combustion-generated acoustic noise. In: EKC 2019, 15-19 July 2019, Vienna, Austria.

Jin, Seong-Ho (2018) Investigating high temperature energy flow on the wall. In: EKC 2018, 20TH - 24TH AUGUST 2018, Glasgow, UK.

Jin, Seong-Ho (2017) Noise generation from methane/air premixed flames. In: EKC 2017, 26 - 29 July 2017, Stockholm, Sweden.

Jin, Seong-Ho (2013) Temperature distribution measurements in an optically accessible single-cylinder engine using phosphor thermometry. In: EKC 2013, 24-26 July 2013, Brighton, UK.

Jin, Seong-Ho and Brear, Michael (2016) On the use of the laser sheet drop-sizing (LSD) technique: droplet size distribution by uncertainty analysis. In: The 36th International Symposium on Combustion, 31st July - 5th August, Seoul, Korea.

Jin, Seong-Ho, Brear, Michael and Brewster, Simon (2008) Spray behaviour of hydrous ethanol fuel (E93) under cold condition. In: Fifth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, 3-4 December 2008, The University of Western Australia, Perth, Australia.

Jin, Seong-Ho, Brear, Michael and Watson, Harry (2006) Transient spray behaviour of an air-assisted liquid injector. In: Australian Workshop on Fluid, December 2006.

Jin, Seong-Ho, Brear, Michael, Zakia, George, Watson, Harry and Zavier, Christian (2004) Transient behaviour of the fuel spray from an air-assisted, direct fuel injector. In: 15th Australasian Fluid Mechanics Conference, 13-17 December 2004, The University of Sydney, Sydney, Australia.

Jin, Seong-Ho, Brear, Michael, Zakis, George, Watson, Harry and Carlisle, Hugh (2005) Effect of chamber pressure on the spray from an air-assisted, direct fuel injector. In: 5th Asia-Pacific Conference on Combustion, 17-20 July 2005, University of Adelaide.

Jin, Seong-Ho and Chung, Suk-Ho (2003) Self-excited noise generation from laminar methane/air premixed flames in thin annular jets. In: 2003 Australian Symposium on Combustion & The 8th Australian Flames Days, 2003, Monash University.

Jin, Seong-Ho (2022) Spray characteristics of bioethanol-blended fuel under various temperature conditions using laser Mie scattering and optical illumination. Fuels . ISSN 2673-3994

Jin, Seong-Ho, Joung, Jae-Hoon and Chung, Suk-Ho (2021) Self-excited noise generation from laminar methane/air premixed flames in thin annular jets. Experimental Thermal and Fluid Science, 122 . p. 110321. ISSN 0894-1777

Jin, Seong-Ho and Kim, Gyung-Soo (2021) Simultaneous measurements of burning velocity and temperature distribution of combustion using UV laser Rayleigh scattering. Measurement, 169 . p. 108505. ISSN 0263-2241

K

Karbasian, Hamid Reza, Esfahani, Javad Abolfazli, Aliyu, Aliyu Musa and Kim, Kyung Chun (2022) Numerical analysis of wind turbines blade in deep dynamic stall. Renewable Energy, 197 . pp. 1094-1105. ISSN 0960-1481

Karimi, Nader, Brear, Michael and Jin, Seong-Ho (2004) Nonlinear dynamics of thermoacoustic instability using a kinematic, premixed flame model. In: 15th Australasian Fluid Mechanics Conference, 13-17 December 2004, University of Sydney, Australia.

Karimi, Nader, Brear, Michael, Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part I: low amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, The University of Queensland, Brisbane.

Karimi, Nader, Brear, Michael, Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part II: higher amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, University of Queensland, Brisbane.

Karimi, Nader, Brear, Michael, Jin, Seong-Ho and Monty, Jason (2008) Experimental investigation of the linear and non-linear dynamics of a ducted, laminar premixed flame. In: The 32nd International Symposium on Combustion, 3-8 August 2008, Montreal, Canada.

Karimi, Nader, Brear, Michael, Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180

Karimi, Nader, Jin, Seong-Ho and Brear, Michael (2007) An experimental study of the transfer function of a ducted, laminar premixed flame. In: 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Gold Coast, Australia.

Kim, Kil-Nam, Joung, Jae-Hoon, Jin, Seong-Ho and Chung, Suk-Ho (2004) Self-excited noise generation from laminar methane/air premixed flames in thin annular jets. In: 2004 Korea-Japan Joint Seminar, December 2004.

M

Madadnia, J. and Owen, I. (1995) Erosion in conical diffusers in particulate-laden cavitating flow. International Journal of Multiphase Flow, 21 (6). pp. 1253-1257. ISSN 0301-9322

Maidi, M., Yao, Y. and Yao, Jun (2009) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: New trends in fluid mechanics research. Springer, pp. 416-419. ISBN 3540759948

Marmiroli, Benedetta, Grenci, Gianluca, Cacho-Nerin, Fernando, Sartori, Barbara, Ferrari, Enrico, Laggner, Peter, Businaro, Luca and Amenitsch, Heinz (2009) Free jet micromixer to study fast chemical reactions by small angle X-ray scattering. Lab on a Chip, 9 (14). pp. 2063-2069. ISSN 1473-0197

Masalo, Ingrid, Guadayol, Oscar, Peters, Francese and Oca, Joan (2008) Analysis of sedimentation and resuspension processes of aquaculture biosolids using an oscillating grid. Aquacultural Engineering, 38 (2). pp. 135-144. ISSN 0144-8609

Mathues, Wouter, Formenti, Susanna, McIlroy, Claire, Harlen, Oliver G. and Clasen, Christian (2018) CaBER vs ROJER—Different time scales for the thinning of a weakly elastic jet. Journal of Rheology, 62 (5). pp. 1135-1153. ISSN 0148-6055

Mathues, Wouter, McIlroy, Claire, Harlen, Oliver G. and Clasen, Christian (2015) Capillary breakup of suspensions near pinch-off. Physics of Fluids, 27 (9). 093301. ISSN 1070-6631

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

McIlroy, Claire and Harlen, Oliver G. (2019) Effects of drive amplitude on continuous jet break-up. Physics of Fluids, 31 (6). 064104. ISSN 1070-6631

McIlroy, Claire and Harlen, Oliver G. (2014) Modelling capillary break-up of particulate suspensions. Physics of Fluids, 26 (3). 033101. ISSN 1070-6631

Meyer, Terrence, Brear, Michael, Jin, Seong-Ho and Gord, James (2010) Formation and diagnostics of sprays in combustion. In: Handbook of combustion. Wiley. ISBN 9783527324491

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

Motamed-Amini, A. and Owen, I. (1987) The expansion of wet steam through a compressible confined vortex in a fluidic vortex diode. International Journal of Multiphase Flow, 13 (6). pp. 845-856. ISSN 0301-9322

O

Owen, I., Abdul-Ghani, A. and Amini, A. M. (1992) Diffusing a homogenized two-phase flow. International Journal of Multiphase Flow, 18 (4). pp. 531-540. ISSN 0301-9322

Owen, I. and Amini, A. (1995) Study of hydraulic impacts in steam plant. In: 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, 13 - 18 August 1995, Hilton Head, South Carolina.

Owen, I. and Amini, A. (1997) Use of critical flow Venturi nozzles with steam. In: 1997 ASME Fluids Engineering Division Summer Meeting, FEDSM'97, 22 - 26 June 1997, Vancouver, British Columbia, Canada..

Owen, I., El-Kady, A. A. and Cleaver, J. W. (1986) A note comparing the rates of deposition of submicron particles with the rates of heat transfer for ribbed surfaces exposed to turbulent gas streams. Journal of Aerosol Science, 17 (2). pp. 145-148. ISSN 0021-8502

Owen, I., Fyrippi, I. and Escudier, M. P. (2003) Flowmetering of shear-thinning non-Newtonian liquids. In: 4th ASME/JSME Joint Fluids Engineering Conference, 6 - 10 July 2003, Honolulu, Hawaii.

Owen, I., Gray, J. D. and Escudier, M. P. (2003) PIV measurements in large-scale cardiovascular models: the importance of dynamic scaling. In: 1st International Conference on Optical and Laser Diagnostic, 16 - 20 December 2002, London.

Owen, I. and Hussein, I. B. (1991) Wet steam flowmeter correction factors. Flow Measurement and Instrumentation, 2 (2). pp. 139-140. ISSN 0955-5986

Owen, I. and Hussein, I. B. (1994) The propulsion of an isolated slug through a pipe and the forces produced as it impacts upon an orifice plate. International Journal of Multiphase Flow, 20 (3). pp. 659-666. ISSN 0301-9322

Owen, I., Hussein, I. B. and Amini, A. M. (1991) The impact of water slugs on wet steam flowmeters. Flow Measurement and Instrumentation, 2 (2). pp. 98-104. ISSN 0955-5986

Owen, I. and Jalil, J. M. (1991) Heterogeneous flashing in water drops. International Journal of Multiphase Flow, 17 (5). pp. 653-660. ISSN 0301-9322

Owen, I. and Madadnia, J. (1995) Valve erosion in cavitating particulate-laden flows. In: 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, 13 - 18 August 1995, Hilton Head, South Carolina.

Owen, I. and Ryley, D. J. (1985) The flow of thin liquid films around corners. International Journal of Multiphase Flow, 11 (1). pp. 51-62. ISSN 0301-9322

Owen, Ieuan (1985) Diffusion of aerosols onto a heated turbine blade. In: International Symposium Workshop on Particulate and Multiphase Processes, April 22-26, 1985, Miami, Florida.

R

Rahimi, M., Owen, I. and Mistry, J. (2003) Heat transfer between an under-expanded jet and a cylindrical surface. International Journal of Heat and Mass Transfer, 46 (17). pp. 3135-3142. ISSN 00179310

Rahimi, M., Owen, I. and Mistry, J. (2003) Impingement heat transfer in an under-expanded axisymmetric air jet. International Journal of Heat and Mass Transfer, 46 (2). pp. 263-272. ISSN 0017-9310

Ribeiro, Joseph X. F., Liao, Ruiquan, Aliyu, Aliyu M., Ahmed, Salem K. B., Baba, Yahaya D., Almabrok, Almabrok A., Archibong-Eso, Archibong, Liu, Zilong, UNSPECIFIED and UNSPECIFIED (2021) A Two-Fluid Model for High-Viscosity Upward Annular Flow in Vertical Pipes. Energies, 14 (12). p. 3485. ISSN 1996-1073

Ribeiro, Joseph X.F., Liao, Ruiquan, Aliyu, Aliyu M., Baba, Yahaya D., Archibong-Eso, Archibong, Ehinmowo, Adegboyega, Zilong, Liu, UNSPECIFIED and UNSPECIFIED (2020) An assessment of gas void fraction prediction models in highly viscous liquid and gas two-phase vertical flows. Journal of Natural Gas Science and Engineering, 76 . p. 103107. ISSN 1875-5100

Ribeiro, Joseph Xavier Francisco, Liao, Ruiquan, Aliyu, Aliyu Musa, Liu, Zilong, UNSPECIFIED and UNSPECIFIED (2020) Upward interfacial friction factor in gas and high-viscosity liquid flows in vertical pipes. Chemical Engineering Communications, 207 (9). pp. 1234-1263. ISSN 0098-6445

Roper, David M., Owen, Ieuan and Padfield, Gareth D. (2005) CFD investigation of the helicopter-ship dynamic interface. In: 61st American Helicopter Society International Annual Forum 2005, 1 - 3 June 2005, Grapevine, Texas.

S

Singh, Dharminder, Charlton, Matthew, Aliyu, Aliyu M. and Mishra, Rakesh (2022) Development of novel predictive equations for local flow asymmetry within control valves using a distribution parameter-based method under multiphase conditions. Journal of Petroleum Science and Engineering . p. 110367. ISSN 0920-4105

Staicu, Adrian, Vorselaars, Bart and van de Water, Willem (2003) Turbulence anisotropy and the SO(3) description. Physical Review E, 68 (4). ISSN 1539-3755

Syawitri, T.P., Yao, Y.F., Chandra, B. and Yao, J. (2021) Comparison study of URANS and hybrid RANS-LES models on predicting vertical axis wind turbine performance at low, medium and high tip speed ratio ranges. Renewable Energy, 168 . pp. 247-269. ISSN 0960-1481

Syawitri, Taurista Perdana, Yao, Yu-Feng, Yao, Jun and Chandra, Budi (2020) The effect of gurney flap on flow characteristics of vertical axis wind turbine. International Journal of Modern Physics B, 34 (14n16). p. 2040107. ISSN 0217-9792

Syawitri, Taurista Perdana, Yao, Yufeng, Yao, Jun and Chandra, Budi (2020) Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine. International Journal of Numerical Methods for Heat & Fluid Flow, 31 (2). pp. 655-673. ISSN 0961-5539

Syawitria, T., Yao, Y.F., Chandra, B. and Yao, Jun (2019) CFD Simulation of Three-Straight-Bladed Vertical Axis Wind Turbine at Low Tip Speed Ratios. In: International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand, 4 - 5 October 2018, 4 - 5 October 2018, Thailand.

T

Tesfa, Belachew Cekene, Mishra, Rakesh, Aliyu, Aliyu M. and UNSPECIFIED (2021) Effect of Biodiesel Blends on the Transient Performance of Compression Ignition Engines. Energies, 14 (17). p. 5416. ISSN 1996-1073

W

Wilkinson, J., Motamed-Amini, A. and Owen, I. (1988) Compressible and confined vortex flow. International Journal of Heat and Fluid Flow, 9 (4). pp. 373-380. ISSN 0142-727X

Wong, M., Owen, I., Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310

X

Xing, Lanchang, Qi, Shuying, Xu, Yuan, Wang, Bin, Lao, Liyun, Wei, Wei, Han, Weifeng, Wei, Zhoutuo, Ge, Xinmin, Aliyu, Aliyu M., UNSPECIFIED and UNSPECIFIED (2021) Numerical study on complex conductivity characteristics of hydrate-bearing porous media. Journal of Natural Gas Science and Engineering, 95 . p. 104145. ISSN 1875-5100

Xu, Yang, Aliyu, Aliyu, Seo, Hyunduk, Wang, Jin-Jun, Kim, Kyung Chun, UNSPECIFIED and UNSPECIFIED (2018) Effect of crossflow velocity on underwater bubble swarms. International Journal of Multiphase Flow, 105 . pp. 60-73. ISSN 0301-9322

Y

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

Yao, Jun, Yao, Y.F., Patel, M. K. and Mason, P. J. (2006) Numerical simulation of microchannel cooling and heat transfer. In: 13th International Heat Transfer Conference, August 13, 2006, Sydney, Australia.

Yao, Jun and Yao, Yufeng (2012) CFD prediction and experimental measurement of blade water coverage in a diesel turbocharger. Modelling and Simulation in Engineering, 2012 . p. 11. ISSN 1687-5591

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

Yao, Jun, Yao, Yufeng, Arini, A., McIlwain, S., Gordon, T. J. and Jin, S. H. (2015) Modelling air and water two-phase annular flow in small horizontal pipe. In: The Sixth International Symposium on Physics of Fluids (ISPF6), Xining, 6 - 9 July 2015, Xining, China.

Yao, Y., Petty, D., Barrington, P., Yao, J. and Mason, P. (2007) Direct numerical simulation of jets in cross-flow. International Journal of Computational Fluid Dynamics, 20 (5). pp. 279-286. ISSN 1061-8562

Yao, Yufeng, Maidi, Mohamad and Yao, Jun (2012) Effect of jet inclination angle and hole exit shape on vortical flow structures in low-Reynolds number jet in cross-flow. Modelling and Simulation in Engineering, 2012 (632040). 7 pages. ISSN 1687-5591

Yao, Yufeng, Yao, Jun and Effendy, M. (2012) Evaluation of wall heat transfer in turbine blade trailing-edge passage. In: The 2nd Int. Conf. on Engineering and Technology Innovation, November 2012, Kaohsiung, Taiwan.

Yao, Jun and Yao, Yufeng (2016) Numerical investigation of wavy-annular airwater two-pase flow in a small horizontal pipe. In: EFCM11 11th European Fluid Mechanics Conference, 12-16 September 2016, Seville, Spain.

Yao, Jun, Yufeng, Yao, Arini, Antonino and Gordon, Timothy (2016) Modelling air and water two-phase annular flow in a small horizontal pipe. International Journal of Modern Physics: Conference Series, 42 . pp. 1660158-1. ISSN 2010-1945