Items where Subject is "G160 Engineering/Industrial Mathematics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
3D printing Bias correction methods Changepoint Detection Clogging Fault Complex Computer-Aided Geometric Design Evolutionary Algorithm FDI FENE model Fault Detection Fault Diagnosis Flow deposition Fractional-order control Heat Exchanger Heat transfer Hyperspectral Imaging Inkjet Printing Input delayed systems JCOpen MPS Compact Workstation Material Extrusion Mathematical Modelling Multi-objective Optimisation Multi-objective optimization NotOAChecked Optimal solutions Optimal systems, Absolute values PID control PLC Polymer solutions Precipitation Regional climate model Robotics Savitzky–Golay smoothing filter Shape Optimisation Simplex Sparsity problems Support Vector Machine Temperature Underdetermined linear systems, Linear systems Vibration Signal Water volume control Western Ghats of India amorphous polymer melt annealing computational modelling conservation of mass constitutive modles continuous jet cross-sectional geometry disentanglement drive amplitude dynamic mechanical analysis empirical mode decomposition extrusion flow-enhanced crystallisation flow-enhanced crystallization flow-induced crystallization fused filament fabrication fused-filament fabrication geometric approach grasping infra-red thermography inkjet technology inter-diffusion jet breakup machine fault detection non-isothermal poly ether ether ketone polycaprolactone polylactic acid polymer melt polymer processing quiescent crystallization model satellite drops semi-crystalline polymer melt simulation tools spectral energy spectrogram surface tension surface-tension-driven instabilitiy welding
Number of items at this level: 91.

3D printing

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

Bias correction methods

Mudbhatkal, Amogh and Mahesha, Amai (2018) Bias correction methods for hydrologic impact studies over India’s Western Ghat basins. Journal of Hydrologic Engineering, 23 (2). 05017030-1. ISSN 1084-0699

Changepoint Detection

Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2015) An online changepoint detection algorithm for highly correlated data. In: 3rd International Conference on Advances in Information Processing and Communication Technology - IPCT, 10 - 11 Dec 2015, Rome, Italy.

Clogging Fault

Huang, Jianfeng, Chen, Guohua, Shu, Lei, Wang, Shihua and Zhang, Yu (2016) An experimental study of clogging fault diagnosis in heat exchangers based on vibration signals. IEEE Access, 4 . pp. 1800-1809. ISSN 2169-3536

Complex

Peachey, T. C., Riley, M. J. W., Abramson, D. and Stewart, J. (2012) A simplex-like search method for bi-objective optimization. In: International Conference on Engineering Optimization, 1-5 July 2012, Rio de Janeiro, Brazil.

Computer-Aided Geometric Design

Schaefer, Dirk (2018) Interpolation mittels lokaler Interpolierender und Blendetechniken. Shaker Verlag, pp. 1-71. ISBN 978-3-8440-6182-6

Evolutionary Algorithm

Riley, Mike J. W., Peachey, Tom, Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

FDI

Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2015) An online changepoint detection algorithm for highly correlated data. In: 3rd International Conference on Advances in Information Processing and Communication Technology - IPCT, 10 - 11 Dec 2015, Rome, Italy.

Maleki, Sepehr, Rapisarda, Paolo and Rogers, Eric (2015) Failure identification for linear repetitive processes. Multidimensional Systems and Signal Processing . ISSN 0923-6082

FENE model

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

Fault Detection

Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2015) An online changepoint detection algorithm for highly correlated data. In: 3rd International Conference on Advances in Information Processing and Communication Technology - IPCT, 10 - 11 Dec 2015, Rome, Italy.

Fault Diagnosis

Huang, Jianfeng, Chen, Guohua, Shu, Lei, Wang, Shihua and Zhang, Yu (2016) An experimental study of clogging fault diagnosis in heat exchangers based on vibration signals. IEEE Access, 4 . pp. 1800-1809. ISSN 2169-3536

Flow deposition

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

Fractional-order control

Mystkowski, Arkadiusz and Zolotas, Argyrios (2018) PLC-BASED DISCRETE FRACTIONAL-ORDER CONTROL DESIGN FOR AN INDUSTRIAL-ORIENTED WATER TANK VOLUME SYSTEM WITH INPUT DELAY. Fractional Calculus & Applied Analysis, 21 (4). pp. 1005-1026. ISSN 1311-0454

Heat Exchanger

Huang, Jianfeng, Chen, Guohua, Shu, Lei, Wang, Shihua and Zhang, Yu (2016) An experimental study of clogging fault diagnosis in heat exchangers based on vibration signals. IEEE Access, 4 . pp. 1800-1809. ISSN 2169-3536

Heat transfer

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

Hyperspectral Imaging

Zahidi, Usman A., Yuen, Peter W. T., Piper, Jonathan and Godfree, Peter S. (2019) An End-to-End Hyperspectral Scene Simulator with Alternate Adjacency Effect Models and Its Comparison with CameoSim. Remote Sensing, 12 (1). p. 74. ISSN 2072-4292

Inkjet Printing

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

Input delayed systems

Mystkowski, Arkadiusz and Zolotas, Argyrios (2018) PLC-BASED DISCRETE FRACTIONAL-ORDER CONTROL DESIGN FOR AN INDUSTRIAL-ORIENTED WATER TANK VOLUME SYSTEM WITH INPUT DELAY. Fractional Calculus & Applied Analysis, 21 (4). pp. 1005-1026. ISSN 1311-0454

JCOpen

Li, Haiyang, Peng, Jigen and Yue, Shigang (2015) The sparsity of underdetermined linear system via lp minimization for 0 < p < 1. Mathematical Problems in Engineering, 2015 . ISSN 1024-123X

MPS Compact Workstation

Mystkowski, Arkadiusz and Zolotas, Argyrios (2018) PLC-BASED DISCRETE FRACTIONAL-ORDER CONTROL DESIGN FOR AN INDUSTRIAL-ORIENTED WATER TANK VOLUME SYSTEM WITH INPUT DELAY. Fractional Calculus & Applied Analysis, 21 (4). pp. 1005-1026. ISSN 1311-0454

Material Extrusion

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

Mathematical Modelling

Maleki, Sepehr, Rapisarda, Paolo and Rogers, Eric (2015) Failure identification for linear repetitive processes. Multidimensional Systems and Signal Processing . ISSN 0923-6082

Multi-objective Optimisation

Riley, Mike J. W., Peachey, Tom, Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

Multi-objective optimization

Peachey, T. C., Riley, M. J. W., Abramson, D. and Stewart, J. (2012) A simplex-like search method for bi-objective optimization. In: International Conference on Engineering Optimization, 1-5 July 2012, Rio de Janeiro, Brazil.

NotOAChecked

Huang, Jianfeng, Chen, Guohua, Shu, Lei, Wang, Shihua and Zhang, Yu (2016) An experimental study of clogging fault diagnosis in heat exchangers based on vibration signals. IEEE Access, 4 . pp. 1800-1809. ISSN 2169-3536

Optimal solutions

Li, Haiyang, Peng, Jigen and Yue, Shigang (2015) The sparsity of underdetermined linear system via lp minimization for 0 < p < 1. Mathematical Problems in Engineering, 2015 . ISSN 1024-123X

Optimal systems, Absolute values

Li, Haiyang, Peng, Jigen and Yue, Shigang (2015) The sparsity of underdetermined linear system via lp minimization for 0 < p < 1. Mathematical Problems in Engineering, 2015 . ISSN 1024-123X

PID control

Mystkowski, Arkadiusz and Zolotas, Argyrios (2018) PLC-BASED DISCRETE FRACTIONAL-ORDER CONTROL DESIGN FOR AN INDUSTRIAL-ORIENTED WATER TANK VOLUME SYSTEM WITH INPUT DELAY. Fractional Calculus & Applied Analysis, 21 (4). pp. 1005-1026. ISSN 1311-0454

PLC

Mystkowski, Arkadiusz and Zolotas, Argyrios (2018) PLC-BASED DISCRETE FRACTIONAL-ORDER CONTROL DESIGN FOR AN INDUSTRIAL-ORIENTED WATER TANK VOLUME SYSTEM WITH INPUT DELAY. Fractional Calculus & Applied Analysis, 21 (4). pp. 1005-1026. ISSN 1311-0454

Polymer solutions

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

Precipitation

Mudbhatkal, Amogh and Mahesha, Amai (2018) Bias correction methods for hydrologic impact studies over India’s Western Ghat basins. Journal of Hydrologic Engineering, 23 (2). 05017030-1. ISSN 1084-0699

Regional climate model

Mudbhatkal, Amogh and Mahesha, Amai (2018) Bias correction methods for hydrologic impact studies over India’s Western Ghat basins. Journal of Hydrologic Engineering, 23 (2). 05017030-1. ISSN 1084-0699

Robotics

Sorour, Mohamed, Elgeneidy, Khaled, Srinivasan, Aravinda and Hanheide, Marc (2019) Grasping Unknown Objects Based on Gripper Workspace Spheres. In: 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

Savitzky–Golay smoothing filter

Zhang, Yu, Bingham, Chris, Gallimore, Michael, Yang, Zhijing and Chen, Jun (2013) Machine fault detection during transient operation using measurement denoising. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 15-17 July 2013, Milan, Italy.

Shape Optimisation

Riley, Mike J. W., Peachey, Tom, Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

Simplex

Peachey, T. C., Riley, M. J. W., Abramson, D. and Stewart, J. (2012) A simplex-like search method for bi-objective optimization. In: International Conference on Engineering Optimization, 1-5 July 2012, Rio de Janeiro, Brazil.

Sparsity problems

Li, Haiyang, Peng, Jigen and Yue, Shigang (2015) The sparsity of underdetermined linear system via lp minimization for 0 < p < 1. Mathematical Problems in Engineering, 2015 . ISSN 1024-123X

Support Vector Machine

Huang, Jianfeng, Chen, Guohua, Shu, Lei, Wang, Shihua and Zhang, Yu (2016) An experimental study of clogging fault diagnosis in heat exchangers based on vibration signals. IEEE Access, 4 . pp. 1800-1809. ISSN 2169-3536

Temperature

Mudbhatkal, Amogh and Mahesha, Amai (2018) Bias correction methods for hydrologic impact studies over India’s Western Ghat basins. Journal of Hydrologic Engineering, 23 (2). 05017030-1. ISSN 1084-0699

Underdetermined linear systems, Linear systems

Li, Haiyang, Peng, Jigen and Yue, Shigang (2015) The sparsity of underdetermined linear system via lp minimization for 0 < p < 1. Mathematical Problems in Engineering, 2015 . ISSN 1024-123X

Vibration Signal

Huang, Jianfeng, Chen, Guohua, Shu, Lei, Wang, Shihua and Zhang, Yu (2016) An experimental study of clogging fault diagnosis in heat exchangers based on vibration signals. IEEE Access, 4 . pp. 1800-1809. ISSN 2169-3536

Water volume control

Mystkowski, Arkadiusz and Zolotas, Argyrios (2018) PLC-BASED DISCRETE FRACTIONAL-ORDER CONTROL DESIGN FOR AN INDUSTRIAL-ORIENTED WATER TANK VOLUME SYSTEM WITH INPUT DELAY. Fractional Calculus & Applied Analysis, 21 (4). pp. 1005-1026. ISSN 1311-0454

Western Ghats of India

Mudbhatkal, Amogh and Mahesha, Amai (2018) Bias correction methods for hydrologic impact studies over India’s Western Ghat basins. Journal of Hydrologic Engineering, 23 (2). 05017030-1. ISSN 1084-0699

amorphous polymer melt

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

annealing

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

computational modelling

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

conservation of mass

Hebda, Michael, McIlroy, Claire, Whiteside, Ben, Caton-Rose, Fin and Coates, Phil (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Additive Manufacturing, 27 . pp. 99-108. ISSN 2214-8604

constitutive modles

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

continuous jet

McIlroy, Claire and Harlen, Oliver G. (2019) Effects of drive amplitude on continuous jet break-up. Physics of Fluids, 31 (6). 064104. ISSN 1070-6631

cross-sectional geometry

Hebda, Michael, McIlroy, Claire, Whiteside, Ben, Caton-Rose, Fin and Coates, Phil (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Additive Manufacturing, 27 . pp. 99-108. ISSN 2214-8604

disentanglement

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

drive amplitude

McIlroy, Claire and Harlen, Oliver G. (2019) Effects of drive amplitude on continuous jet break-up. Physics of Fluids, 31 (6). 064104. ISSN 1070-6631

dynamic mechanical analysis

Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604

empirical mode decomposition

Zhang, Yu, Bingham, Chris, Gallimore, Michael, Yang, Zhijing and Chen, Jun (2013) Machine fault detection during transient operation using measurement denoising. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 15-17 July 2013, Milan, Italy.

extrusion

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

flow-enhanced crystallisation

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

flow-enhanced crystallization

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

flow-induced crystallization

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

fused filament fabrication

Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604

fused-filament fabrication

Hebda, Michael, McIlroy, Claire, Whiteside, Ben, Caton-Rose, Fin and Coates, Phil (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Additive Manufacturing, 27 . pp. 99-108. ISSN 2214-8604

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

geometric approach

Maleki, Sepehr, Rapisarda, Paolo and Rogers, Eric (2015) Failure identification for linear repetitive processes. Multidimensional Systems and Signal Processing . ISSN 0923-6082

grasping

Sorour, Mohamed, Elgeneidy, Khaled, Srinivasan, Aravinda and Hanheide, Marc (2019) Grasping Unknown Objects Based on Gripper Workspace Spheres. In: 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

infra-red thermography

Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604

inkjet technology

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

inter-diffusion

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

jet breakup

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

machine fault detection

Zhang, Yu, Bingham, Chris, Gallimore, Michael, Yang, Zhijing and Chen, Jun (2013) Machine fault detection during transient operation using measurement denoising. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 15-17 July 2013, Milan, Italy.

non-isothermal

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

poly ether ether ketone

Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604

polycaprolactone

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

polylactic acid

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

polymer melt

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

polymer processing

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

quiescent crystallization model

Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604

satellite drops

McIlroy, Claire and Harlen, Oliver G. (2019) Effects of drive amplitude on continuous jet break-up. Physics of Fluids, 31 (6). 064104. ISSN 1070-6631

semi-crystalline polymer melt

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

simulation tools

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

spectral energy

Zhang, Yu, Bingham, Chris, Gallimore, Michael, Yang, Zhijing and Chen, Jun (2013) Machine fault detection during transient operation using measurement denoising. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 15-17 July 2013, Milan, Italy.

spectrogram

Zhang, Yu, Bingham, Chris, Gallimore, Michael, Yang, Zhijing and Chen, Jun (2013) Machine fault detection during transient operation using measurement denoising. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 15-17 July 2013, Milan, Italy.

surface tension

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

surface-tension-driven instabilitiy

McIlroy, Claire and Harlen, Oliver G. (2019) Effects of drive amplitude on continuous jet break-up. Physics of Fluids, 31 (6). 064104. ISSN 1070-6631

welding

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

This list was generated on Wed Sep 20 21:15:49 2023 BST.