Items where Creator is "McIlroy, Claire"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | Final Publication Date | No Grouping
Number of items: 22.


Das, A, Riat, J.A., Bortner, A and McIlroy, Claire (2022) Rheology, crystallization, and process conditions: The effect on interlayer properties in three-dimensional printing. Physics of Fluids, 34 . p. 123108. ISSN 1070-6631

Constanzo, A, Poggi, A, Looijmans, S, Venkatraman, D, Sawyer, D, Puskar, L, McIlroy, Claire and Cavallo, D (2022) The role of molar mass in achieving isotropy and interlayer strength in Mat-Ex printed polylactic acid. Polymers, 14 (14). p. 2792. ISSN 2073-4360

Gilmer, E, Anderegg, D, Gardener, J, Sauti, G, Siochi, E, McKnight, S, Dillard, D, McIlroy, C and Bortner, M (2021) Temperature, diffusion and stress modeling in filament extrusion additive manufacturing of polyetheramide: An examination of the influence of processing parameters and the importance of modeling assumptions. Additive Manufacturing, 48 (Part A). p. 102412. ISSN 2214-8604

Constanzo, Andrea, Cavallo, Dario and McIlroy, Claire (2021) High-Performance Co-polyesters for Material-Extrusion 3D Printing: A Molecular Perspective of Weld Properties. Additive Manufacturing, 49 . ISSN 2214-8604

Costanzo, A, Spotorno, R, Candal, M, Fernandez, M, Muller, A, Graham, R, Cavallo, D and McIlroy, Claire (2020) Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid. Additive Manufacturing, 36 . p. 101415. ISSN 2214-8604

Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

Read, D.J., McIlroy, C., Das, C., Harlen, O.G. and Graham, R.S. (2020) PolySTRAND Model of Flow-Induced Nucleation in Polymers. Physical Review Letters, 124 (14). p. 147802. ISSN 0031-9007

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

McIlroy, Claire and Harlen, Oliver G. (2019) Effects of drive amplitude on continuous jet break-up. Physics of Fluids, 31 (6). 064104. ISSN 1070-6631

Hebda, Michael, McIlroy, Claire, Whiteside, Ben, Caton-Rose, Fin and Coates, Phil (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Additive Manufacturing, 27 . pp. 99-108. ISSN 2214-8604

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

Mathues, Wouter, Formenti, Susanna, McIlroy, Claire, Harlen, Oliver G. and Clasen, Christian (2018) CaBER vs ROJER—Different time scales for the thinning of a weakly elastic jet. Journal of Rheology, 62 (5). pp. 1135-1153. ISSN 0148-6055

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

Mathues, Wouter, McIlroy, Claire, Harlen, Oliver G. and Clasen, Christian (2015) Capillary breakup of suspensions near pinch-off. Physics of Fluids, 27 (9). 093301. ISSN 1070-6631

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

McIlroy, Claire and Harlen, Oliver G. (2014) Modelling capillary break-up of particulate suspensions. Physics of Fluids, 26 (3). 033101. ISSN 1070-6631

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

Hoath, Stephen D., Castrejón-Pita, José Rafael, Hsiao, Wen-Kai, Jung, Sungjune, Martin, Graham D., Hutchings, Ian M., Tuladhar, Tri R., Vadillo, Damien C., Butler, Simon A., Mackley, Malcolm R., McIlroy, Claire, Morrison, Neil F., Harlen, Oliver G. and Yow, Huai Nyin (Grace) (2013) Jetting of Complex Fluids. Journal of Imaging Science and Technology, 57 (4). pp. 1-10. ISSN 1062-3701

Book Section

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

This list was generated on Sat Sep 23 17:57:42 2023 BST.