Investigation into the efficacy of CO2 lasers for modifying the factors influencing biocompatibility of a polymeric biomaterial in comparison with an F2 excimer laser

Waugh, David, Lawrence, Jonathan, Walton, C.D. and Zakaria, R.B. (2008) Investigation into the efficacy of CO2 lasers for modifying the factors influencing biocompatibility of a polymeric biomaterial in comparison with an F2 excimer laser. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Full content URL: http://www.laserinstitute.org/store/course/ICAL08#

Documents
Paper_(M604).pdf
[img]
[Download]
[img]
Preview
PDF
Paper_(M604).pdf - Whole Document

589kB
Item Type:Conference or Workshop contribution (Paper)
Item Status:Live Archive

Abstract

Enhancement of the biocompatibility of a material by means of laser radiation has been amply demonstrated previously. Due to efficient absorption of the energy, short wavelengths and energies per pulse, polymers are usually processed using UV lasers, but the processing of polymers with IR lasers has also been demonstrated previously. In this work a comparative study for the surface modification of nylon 6,6 has been conducted in order to vary the parameters driving biocompatibility (surface topography, hydrophobic reactions, hydrophilic reactions and surface chemistry) using CO2 and excimer lasers. Topographical changes were analysed using white light interferometry which indicated that both laser systems could be implemented for modifying the topography of nylon 6,6. Variations in the surface chemistry were evaluated using EDX and XPS analysis and showed that the O2 increased and decreased for the CO2 and F2 laser irradiated samples, respectively. Modification of the hydrophobic and hydrophilic reactions was quantified by measuring the contact angle, which was found to increase in all instances for both laser systems. It is proposed that the increase in contact angle, especially for the CO2 laser irradiated samples, is due to a change in wetting regime as a result of the surface pattern produced.

Additional Information:Enhancement of the biocompatibility of a material by means of laser radiation has been amply demonstrated previously. Due to efficient absorption of the energy, short wavelengths and energies per pulse, polymers are usually processed using UV lasers, but the processing of polymers with IR lasers has also been demonstrated previously. In this work a comparative study for the surface modification of nylon 6,6 has been conducted in order to vary the parameters driving biocompatibility (surface topography, hydrophobic reactions, hydrophilic reactions and surface chemistry) using CO2 and excimer lasers. Topographical changes were analysed using white light interferometry which indicated that both laser systems could be implemented for modifying the topography of nylon 6,6. Variations in the surface chemistry were evaluated using EDX and XPS analysis and showed that the O2 increased and decreased for the CO2 and F2 laser irradiated samples, respectively. Modification of the hydrophobic and hydrophilic reactions was quantified by measuring the contact angle, which was found to increase in all instances for both laser systems. It is proposed that the increase in contact angle, especially for the CO2 laser irradiated samples, is due to a change in wetting regime as a result of the surface pattern produced.
Keywords:CO2 laser, F2 laser, wettability, nylon 66
Subjects:F Physical Sciences > F830 Topography
J Technologies > J410 Polymers Technology
H Engineering > H673 Bioengineering
F Physical Sciences > F361 Laser Physics
Divisions:College of Science > School of Engineering
ID Code:3338
Deposited On:14 Sep 2010 08:35

Repository Staff Only: item control page