Zavala, J. C., Stewart, Paul and Fleming, P. J. (2002) Multiobjective automotive drive by wire controller design. In: Proceedings of 2002 IEEE International Symposium on Computer Aided Control System Design, 18-20 September 2002, Glasgow, Scotland, UK.
Documents |
|
![]()
|
PDF
multiobjective_drive_by_wire_upload.pdf - Whole Document 3MB |
Item Type: | Conference or Workshop contribution (Paper) |
---|---|
Item Status: | Live Archive |
Abstract
The presence of flexibility in automotive drivelines, coupled with nonlinear elements such as gear lash leads to the presence of an undesirable oscillatory response to step changes in throttle input. This oscillation is generally low frequency (approximately 2 to 5 kHz) and can be of sufficient amplitude to cause driver discomfort and subjective disappointment with the driveability of the vehicle. A pole placement controller is developed for a "drive by wire" (electronically operated throttle) system, with the objective of reducing or eliminating the oscillatory response. Due to the inherent nonlinearities present in the system and the various constraints which must be applied to the controller design, the polynomial values for the pole placement controller are selected by the application of multi objective optimisation.
Additional Information: | The presence of flexibility in automotive drivelines, coupled with nonlinear elements such as gear lash leads to the presence of an undesirable oscillatory response to step changes in throttle input. This oscillation is generally low frequency (approximately 2 to 5 kHz) and can be of sufficient amplitude to cause driver discomfort and subjective disappointment with the driveability of the vehicle. A pole placement controller is developed for a "drive by wire" (electronically operated throttle) system, with the objective of reducing or eliminating the oscillatory response. Due to the inherent nonlinearities present in the system and the various constraints which must be applied to the controller design, the polynomial values for the pole placement controller are selected by the application of multi objective optimisation. |
---|---|
Keywords: | Pole placement, Drive by wire, Multiobjective Optimisation, Driveability |
Subjects: | H Engineering > H660 Control Systems G Mathematical and Computer Sciences > G700 Artificial Intelligence H Engineering > H330 Automotive Engineering |
Divisions: | College of Science > School of Engineering |
ID Code: | 2196 |
Deposited On: | 02 Mar 2010 22:58 |
Repository Staff Only: item control page