Items where Subject is "J Technologies > J510 Materials Technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Jump to: A | B | C | E | F | G | J | K | N | S | W | Y
Number of items at this level: 49.

A

Ahmad, M. and Ahmed, E. and Hong, Z. L. and Xu, J. F. and Khalid, N. R. and Elhissi, A. and Ahmed, W. (2013) A facile one-step approach to synthesizing ZnO/graphene composites for enhanced degradation of methylene blue under visible light. Applied Surface Science, 274 . pp. 273-281. ISSN 0169-4332

Ahmed, I. and Javeed, A. and Ahmed, W. and Phoenix, D. A. and Elhissi, A. and Jackson, M. J. (2016) Delivery of anticancer molecules using carbon nanotubes. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 563-572. ISBN 9783319334899, 9783319334875

Ahmed, M. H. and Byrne, J. A. and McLaughlin, J. A. D. and Elhissi, A. and Ahmed, W. (2013) Comparison between FTIR and XPS characterization of amino acid glycine adsorption onto diamond-like carbon (DLC) and silicon doped DLC. Applied Surface Science, 273 . pp. 507-514. ISSN 0169-4332

Ahmed, W. and Jackson, M. J. (2014) Emerging nanotechnologies for manufacturing. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 1-10. ISBN 9780323289900, 9780323296434

Ahmed, W. and Jackson, M. J. (2014) Preface. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, xv. ISBN 9780323289900, 9780323296434

Ahmed, W. and Jackson, M. J. and Ul Hassan, I. (2014) Nanotechnology to nanomanufacturing. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 1-13. ISBN 9780323289900, 9780323296434

Ahmed, Waqar and Jackson, Mark J. (2016) Preface. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, vii-viii. ISBN 9783319334899, 9783319334875

Ahmed, Waqar and Jackson, Mark J. (2016) Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 1-691. ISBN 9783319334899, 9783319334875

Ali, N. and Kousa, Y. and Gracio, J. and Cabral, G. and Sousa, A. and Shokufar, T. and Titus, E. and Madaleno, J. C. and Ahmed, W. and Jackson, M. J. (2016) Biomaterial-cell tissue interactions in surface engineered carbon-based biomedical implants and devices. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 303-378. ISBN 9783319334899, 9783319334875

Ali, N. and Kousa, Y. and Gracio, J. and Cabral, G. and Sousa, A. and Shokufar, T. and Titus, E. and Madaleno, J. C. and Ahmed, W. and Jackson, M. J. (2016) Surface engineering of artificial heart valves to using modified diamond-like coatings. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 117-148. ISBN 9783319334899, 9783319334875

Azzawi, M. and Seifalian, A. and Ahmed, W. (2016) Nanotechnology for the diagnosis and treatment of diseases. Nanomedicine, 11 (16). pp. 2025-2027. ISSN 1743-5889

B

Byrne, J. A. and Okpalugo, T. and Ahmed, W. and Jackson, M. J. (2016) Applications of carbon nanotubes in bio-nanotechnology. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 379-408. ISBN 9783319334899, 9783319334875

C

Chilton, J. and Velasco, R. (2005) Applications of textile composites in the construction industry. In: Design and manufacture of textile composites. Woodhead publishing in textiles . Woodhead, Abingdon, pp. 424-435. ISBN 1855737442

E

Elhissi, A. and Hidayat, K. and Phoenix, D. A. and Mwesigwa, E. and Crean, S. and Ahmed, W. and Faheem, A. and Taylor, K. M. G. (2013) Air-jet and vibrating-mesh nebulization of niosomes generated using a particulate-based proniosome technology. International Journal of Pharmaceutics, 444 (1-2). pp. 193-199. ISSN 0378-5173

Elhissi, A. and Phoenix, D. and Ahmed, W. (2014) Some approaches to large-scale manufacturing of liposomes. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 402-417. ISBN 9780323289900, 9780323296434

F

Franceschini, Federica and Demir, Ali Gökhan and Dowding, Colin and Previtali, Barbara and Griffiths, Jonathan David (2014) Laser colouring on titanium alloys: characterisation and potential applications. In: X Conferenza del Colore, 11th-12th September 2014, Genoa.

G

The University of Lincoln; Faculty of Health, Life and Social Science (2015) Metals recovery method and polymer for use in metals recovery and process for making such a polymer. ..

J

Jackson, M. J. and Ahmed, W. and Whitt, M. and Handy, R. and Robinson, G. M. and Whitfield, M. D. and Morrell, J. S. (2014) Commercialization of nanotechnologies: technology transfer from university research laboratories. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 270-278. ISBN 9780323289900, 9780323296434

Jackson, M. J. and Novakov, T. and da Silva, M. B. and Handy, R. and Robinson, G. and Whitfield, M. and Morrell, J. and Ahmed, W. (2016) Atomic scale machining of medical materials. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 1-54. ISBN 9783319334899, 9783319334875

Jackson, M. J. and Robinson, G. M. and Whitfield, M. D. and Ahmed, W. and Morrell, J. S. (2014) Micro- and nanomachining. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 202-229. ISBN 9780323289900, 9780323296434

Jackson, M. J. and Robinson, G. M. and Whitfield, M. D. and Hyde, L. J. and Underdown, Jr. and Sein, H. and Ahmed, W. (2015) Nanogrinding with abrasives. In: Machining with nanomaterials. Springer International Publishing, pp. 347-369. ISBN 9783319190099, 9783319190082

Jackson, M. J. and Whitfield, M. and Robinson, G. M. and Handy, R. and Ahmed, W. (2016) Machining cancellous bone prior to prosthetic implantation. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 439-474. ISBN 9783319334899, 9783319334875

Jackson, M. J. and Whitfield, M. D. and Robinson, G. M. and Ahmed, W. and Morrell, J. S. (2014) Analysis of the effects of micromachining using nanostructured cutting tools. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 319-342. ISBN 9780323289900, 9780323296434

Jackson, M. J. and Whitfield, M. D. and Robinson, G. M. and Cabral, G. and Reis, P. and Titus, E. and Madaleno, J. C. and Davim, J. P. and Gracio, J. and Ahmed, W. and Sein, H. (2015) Machining of brittle materials using nanostructured diamond tools. In: Machining with nanomaterials. Springer International Publishing, pp. 129-153. ISBN 9783319190099, 9783319190082

Jackson, M. J. and Whitfield, M. D. and Robinson, G. M. and Handy, R. G. and Ahmed, W. and Sein, H. and Morrell, J. S. (2015) Manufacture and development of nanostructured diamond tools. In: Machining with nanomaterials. Springer International Publishing, pp. 273-298. ISBN 9783319190099, 9783319190082

Jackson, M. J. and Whitfield, M. D. and Robinson, G. M. and Handy, R. G. and Morrell, J. S. and Ahmed, W. and Sein, H. (2015) Analysis of contact of chip and tool using nanostructured coated cutting tools. In: Machining with nanomaterials. Springer International Publishing, pp. 155-175. ISBN 9783319190099, 9783319190082

Jackson, M. J. and Whitfield, M. D. and Robinson, G. M. and Handy, R. G. and Morrell, J. S. and Ahmed, W. and Sein, H. (2015) Micromachining from a materials perspective. In: Machining with nanomaterials. Springer International Publishing, pp. 77-127. ISBN 9783319190099, 9783319190082

Jackson, M. J. and Whitfield, M. D. and Robinson, G. M. and Handy, R. G. and Morrell, J. S. and Davim, J. P. and Ahmed, W. and Sein, H. (2015) Fundamentals of machining. In: Machining with nanomaterials. Springer International Publishing, pp. 1-35. ISBN 9783319190099, 9783319190082

Jackson, M. J. and Whitfield, M. D. and Robinson, G. M. and Morrell, J. S. and Ahmed, W. (2016) Diamond nanogrinding. In: Advances in nanomaterials. Advanced Structured Materials, 79 . Springer Verlag, pp. 247-297. ISBN 9788132226666

K

Khan, I. and Yousaf, S. and Alhnan, M. A. and Ahmed, W. and Elhissi, A. and Jackson, M. J. (2016) Design characteristics of inhaler devices used for pulmonary delivery of medical aerosols. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 573-592. ISBN 9783319334899, 9783319334875

Khan, I. and Yousaf, S. and Subramanian, S. and Korale, O. and Alhnan, M. A. and Ahmed, W. and Taylor, K. M. G. and Elhissi, A. (2015) Proliposome powders prepared using a slurry method for the generation of beclometasone dipropionate liposomes. International Journal of Pharmaceutics, 496 (2). pp. 342-350. ISSN 0378-5173

N

Najlah, M. and Kadam, A. and Wan, K.-W. and Ahmed, W. and Taylor, K. M. G. and Elhissi, A. M. A. (2016) Novel paclitaxel formulations solubilized by parenteral nutrition nanoemulsions for application against glioma cell lines. International Journal of Pharmaceutics, 506 (1-2). pp. 102-109. ISSN 0378-5173

Najlah, M. and Parveen, I. and Alhnan, M. A. and Ahmed, W. and Faheem, A. and Phoenix, D. A. and Taylor, K. M. G. and Elhissi, A. (2014) The effects of suspension particle size on the performance of air-jet, ultrasonic and vibrating-mesh nebulisers. International Journal of Pharmaceutics, 461 (1-2). pp. 234-241. ISSN 0378-5173

Najlah, M. and Vali, A. and Taylor, M. and Arafat, B. T. and Ahmed, W. and Phoenix, D. A. and Taylor, K. M. G. and Elhissi, A. (2013) A study of the effects of sodium halides on the performance of air-jet and vibrating-mesh nebulizers. International Journal of Pharmaceutics, 456 (2). pp. 520-527. ISSN 0378-5173

Ng, K. W. and Lawrence, Jonathan and Man, H. C. and Yue, T. M. and Waugh, David G. (2013) Enhancement of the wettability characteristics of a nickel-titanium (NiTi) medical implant alloy by laser surface alloying with molybdenum (Mo) and Niobium (Nb). Lasers in Engineering, 26 (5-6). pp. 269-283. ISSN 0898-1507

Ng, K. W. and Man, H. C. and Lawrence, Jonathan and Yue, T. M. (2009) Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (8). pp. 969-979. ISSN 0954-4054

S

Sein, H. and Maryan, C. and Jones, A. and Verran, J. and Ali, N. and Hassan, I. U. and Rego, C. and Ahmed, W and Jackson, M. J. (2016) Diamond surgical tools. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 149-194. ISBN 9783319334899, 9783319334875

Sein, H. and Maryan, C. and Jones, A. and Verran, J. and Ali, N. and Hassan, I. U. and Rego, C. and Ahmed, W. and Jackson, M. . (2016) Dental tool technology. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 195-224. ISBN 9783319334899, 9783319334875

Sein, H. and Maryan, C. and Jones, A. and Verran, J. and Ali, N. and Hassan, I. U. and Rego, C. and Ahmed, W. and Jackson, M. J. (2016) Nanocrystalline diamond: deposition routes and clinical applications. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 225-248. ISBN 9783319334899, 9783319334875

Shukla, Pratik and Lawrence, Jonathan and Wu, H. (2010) Fracture toughness of a zirconia engineering ceramic and the effects thereon of surface processing with fibre laser radiation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (10). pp. 1555-1569. ISSN 0954-4054

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

W

Wain, R. A. J. and Hammond, D. and McPhillips, M. and Whitty, J. P. M. and Ahmed, W. (2016) Microvascular anastomoses: suture and non-suture methods. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 545-562. ISBN 9783319334899, 9783319334875

Waugh, David (2011) Laser could light the way in joint surgery and save the NHS money. Lincolnshire Echo . ISSN 0962-5003

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Y

Yousaf, S. and Alhnan, M. A. and Abdallah, A. and Abdallah, B. and Khan, I. and Ahmed, W. (2014) Nanocoatings in medicine: antiquity and modern times. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies . Elsevier Science, pp. 418-443. ISBN 9780323289900, 9780323296434

This list was generated on Thu Jun 29 02:45:13 2017 BST.