Items where Subject is "H990 Engineering not elsewhere classified"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
3D printing Actuators Adaptive control systems Adaptive filtering Adaptive systems Aeronomy of Ice in the Mesosphere (AIM) Algorithms Attention detection Automata theory Beads-on-string Biomedical engineering Bonding Boundary value problems CCD CQCM CT Combined SAXS and WAXS detector Computer hardware Computer simulation Computerized tomography Continuous action reinforcement learning automata Control laws Control system synthesis Convergence of numerical methods Ct image reconstruction Degassing Detectors Digital control systems Discrete time control systems Dynamic vehicle roll control Elasticity Electrospinning Endo-atmospheric measurements Error analysis Error detection Excimer laser Exploding foil initiator (EFI) FENE model Finite automata Finite-extensibility Flow deposition Flyer layer Full body vehicle system, Learning systems Genetic algorithms Global optimization Heat transfer Human Visual System Hybrid imaging IIR filters Image reconstruction Immune-inspired multi-objective optimisation Infinite time control Information science Information science, Problem solving Inkjet Inkjet Printing Instrumentation Intelligent control Interferometry Internet of things Interpretability Irrigation settlement Iterative methods Laser Learning algorithms Learning procedures Learning systems Line energy Linear control systems Linear low density Linear low density polyethylenes MRI Machine Learning Material Extrusion Minimization problems Modeling construct Molecular films Molecular imprinting Molecular recognition Multivariable control systems Neural networks Nonlinear systems NotOAChecked Objective functions Occultation Oncology imaging Optical Optimization Optimization problems Optimization, Stochastic learning automata, Genetic algorithms PID controllers, Automata theory Parameter estimation Parameter tuning Particles (particulate matter) Peel resistance, Adhesives Peel-seal Photodeposition Polymer Polymer deformation Polymer solutions Polypropylenes, Laser bonding Problem solving Proximal point method Radiometers, Solar equipment Random processes, Adaptive signal processing, Automata theory Random processes, Learning automata (LA), Automata theory Random processes, Reinforcement learning automata Reconstruction problems Reduced parallax Regularization terms Reinforcement learning techniques, Optimal control systems Riccati equations, Bellman equations Robotics platforms SPECT Semi-supervised learning Sleep Rhythms Solar Occultation for Ice Experiment (SOFIE) Solar attenuation Sonography State-of-the-art approach Stochastic learning automata, Adaptive filtering Supervised learning, Eye movements TQCM, Contamination Thalamic Interneurons Thalamocortical Circuitry Three term control systems, Continuous action reinforcement learning automata (CARLA) Time of Arrival Top down models, Biomedical engineering Tv regularizations, Algorithms US Variable length coding scheme Vehicle suspensions Vehicles, Automotive systems Viscosity amorphous polymer melt annealing art jewellery bioactive compounds bioactivity birefringence calcium alginate capsules complex fluids computational modelling conservation of mass constitutive modles cross-sectional geometry cyclodextrin demand side management disentanglement distributed algorithms electrical power electrospinning electrospray electrospraying encapsulation engineering techology extrusion fibres flow-enhanced crystallisation flow-enhanced crystallization flow-induced crystallization food contaminates freeze-thaw fused-filament fabrication history hydrogen bonding infrastructure history inkjet printing inkjet technology innovation inter-diffusion jet breakup laser membrane molecular orientation nanofibre nanofibres nanoparticles nanotechnology non-isothermal nylon 66 osteoblast cells poly lactic acid polycaprolactone polylactic acid polymer melt polymer processing positioning regenerative medicine research and development resource allocation safe delivery system semi-crystalline polymer melt simulation tools social history surface tension titanium oxide weld strength welding wettability
Number of items at this level: 225.

3D printing

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

Actuators

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Adaptive control systems

Howell, M. N., Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Adaptive filtering

Howell, M. N. and Gordon, Timothy (2001) Continuous action reinforcement learning automata and their application to adaptive digital filter design. Engineering Applications of Artificial Intelligence, 14 (5). pp. 549-561. ISSN 0952-1976

Adaptive systems

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Aeronomy of Ice in the Mesosphere (AIM)

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Algorithms

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Attention detection

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Automata theory

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Beads-on-string

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

Biomedical engineering

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Bonding

Dowding, Colin, Griffiths, Jonathan David and Lawrence, J. (2014) Characterization of the laser bonding of a linear low density polyethylene film to a polypropylene substrate. Lasers in Engineering, 28 (5-6). pp. 303-317. ISSN 0898-1507

Boundary value problems

Howell, M. N., Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

CCD

Pokric, Boris, Allinson, Nigel, Ryan, Anthony J., Fairclough, Patrick, Dobson, Barry R., Derbyshire, Gareth E., Helsby, William, Long, Graham and Moon, Kevin (2002) A double area detector system for simultaneous small and wide-angle X-ray scattering. Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 477 (1-3). pp. 329-334. ISSN 0168-9002

CQCM

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

CT

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

Combined SAXS and WAXS detector

Pokric, Boris, Allinson, Nigel, Ryan, Anthony J., Fairclough, Patrick, Dobson, Barry R., Derbyshire, Gareth E., Helsby, William, Long, Graham and Moon, Kevin (2002) A double area detector system for simultaneous small and wide-angle X-ray scattering. Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 477 (1-3). pp. 329-334. ISSN 0168-9002

Computer hardware

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Computer simulation

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Howell, M. N. and Gordon, Timothy (2001) Continuous action reinforcement learning automata and their application to adaptive digital filter design. Engineering Applications of Artificial Intelligence, 14 (5). pp. 549-561. ISSN 0952-1976

Howell, M. N., Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Computerized tomography

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Continuous action reinforcement learning automata

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Control laws

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Control system synthesis

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Convergence of numerical methods

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Howell, M. N. and Gordon, Timothy (2000) On the genetic adaptation of stochastic learning automata. In: IEEE Conference on Evolutionary Computation, ICEC, 16 - 19 July 2000, La Jolla, CA, USA.

Howell, M. N., Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Ct image reconstruction

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Degassing

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Detectors

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Digital control systems

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Discrete time control systems

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Dynamic vehicle roll control

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Elasticity

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

Electrospinning

Ghosal, K., Agatemor, C., Tucker, N., Kny, E. and Thomas, S. (2018) Electrical spinning to electrospinning: a brief history. In: Electrospinning: basic research to commercialization. Royal Society of Chemistry. ISBN 9781788011006

Endo-atmospheric measurements

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Error analysis

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Howell, M. N., Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Error detection

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Excimer laser

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

Exploding foil initiator (EFI)

Borman, Alexander J., Dowding, Colin F., Griffiths, Jonathan D. and Seddon, Dick (2017) Exploding foil initiator (EFI) modes of operation determined using down-barrel flyer layer velocity measurement. Propellants, Explosives, Pyrotechnics, 42 (3). pp. 318-328. ISSN 0721-3115

FENE model

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

Finite automata

Howell, M. N. and Gordon, Timothy (2000) On the genetic adaptation of stochastic learning automata. In: IEEE Conference on Evolutionary Computation, ICEC, 16 - 19 July 2000, La Jolla, CA, USA.

Finite-extensibility

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

Flow deposition

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

Flyer layer

Borman, Alexander J., Dowding, Colin F., Griffiths, Jonathan D. and Seddon, Dick (2017) Exploding foil initiator (EFI) modes of operation determined using down-barrel flyer layer velocity measurement. Propellants, Explosives, Pyrotechnics, 42 (3). pp. 318-328. ISSN 0721-3115

Full body vehicle system, Learning systems

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Genetic algorithms

Howell, M. N., Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Global optimization

Howell, M. N., Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Heat transfer

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

Human Visual System

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Hybrid imaging

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

IIR filters

Howell, M. N. and Gordon, Timothy (2001) Continuous action reinforcement learning automata and their application to adaptive digital filter design. Engineering Applications of Artificial Intelligence, 14 (5). pp. 549-561. ISSN 0952-1976

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Image reconstruction

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Immune-inspired multi-objective optimisation

Chen, Jun and Mahfouf, Mahdi (2012) Improving transparency in approximate fuzzy modeling using multi-objective immune-inspired optimisation. International Journal of Computational Intelligence Systems, 5 (2). pp. 322-342. ISSN 1875-6891

Infinite time control

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Information science

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Information science, Problem solving

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Inkjet

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

Inkjet Printing

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

Instrumentation

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

Intelligent control

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Interferometry

Borman, Alexander J., Dowding, Colin F., Griffiths, Jonathan D. and Seddon, Dick (2017) Exploding foil initiator (EFI) modes of operation determined using down-barrel flyer layer velocity measurement. Propellants, Explosives, Pyrotechnics, 42 (3). pp. 318-328. ISSN 0721-3115

Internet of things

Muralidharan, Amrutha, Maior, Horia and Rao, Shrisha (2018) A Self-Governing and Decentralized Network of Smart Objects to Share Electrical Power Autonomously. In: Sustainable Cloud and Energy Services. Springer, pp. 25-48. ISBN 978-3-319-62237-8, 978-3-319-62238-5

Interpretability

Chen, Jun and Mahfouf, Mahdi (2012) Improving transparency in approximate fuzzy modeling using multi-objective immune-inspired optimisation. International Journal of Computational Intelligence Systems, 5 (2). pp. 322-342. ISSN 1875-6891

Irrigation settlement

Whelan, Deborah (2015) Diluted by history: the extraordinary endeavour of the Winterton Irrigation Settlement. In: South African Historical Society Biennial Conference, 2-4 July 2015, Stellenbosch.

Iterative methods

Howell, M. N. and Gordon, Timothy (2001) Continuous action reinforcement learning automata and their application to adaptive digital filter design. Engineering Applications of Artificial Intelligence, 14 (5). pp. 549-561. ISSN 0952-1976

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Laser

Dowding, Colin, Dowding, Robert, Griffiths, Jonathan David and Lawrence, Jonathan (2013) Peel resistance characterization of localized polymer film bonding via thin film adhesive thermally activated by scanned CO2 laser. Optics & Laser Technology, 48 . pp. 358-365. ISSN 0030-3992

Learning algorithms

Howell, M. N. and Gordon, Timothy (2000) On the genetic adaptation of stochastic learning automata. In: IEEE Conference on Evolutionary Computation, ICEC, 16 - 19 July 2000, La Jolla, CA, USA.

Learning procedures

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Learning systems

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Howell, M. N. and Gordon, Timothy (2001) Continuous action reinforcement learning automata and their application to adaptive digital filter design. Engineering Applications of Artificial Intelligence, 14 (5). pp. 549-561. ISSN 0952-1976

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Howell, M. N., Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Howell, M. N., Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Line energy

Dowding, Colin, Griffiths, Jonathan David and Lawrence, J. (2014) Characterization of the laser bonding of a linear low density polyethylene film to a polypropylene substrate. Lasers in Engineering, 28 (5-6). pp. 303-317. ISSN 0898-1507

Linear control systems

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Linear low density

Dowding, Colin, Griffiths, Jonathan David and Lawrence, J. (2014) Characterization of the laser bonding of a linear low density polyethylene film to a polypropylene substrate. Lasers in Engineering, 28 (5-6). pp. 303-317. ISSN 0898-1507

Linear low density polyethylenes

Dowding, Colin, Griffiths, Jonathan David and Lawrence, J. (2014) Characterization of the laser bonding of a linear low density polyethylene film to a polypropylene substrate. Lasers in Engineering, 28 (5-6). pp. 303-317. ISSN 0898-1507

MRI

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

Machine Learning

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

Material Extrusion

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

Minimization problems

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Modeling construct

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Molecular films

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Molecular imprinting

Ghorani, B., Tucker, N. and Yoshikawa, M. (2015) Approaches for the assembly of molecularly imprinted electrospun nanofibre membranes and consequent use in selected target recognition. Food Research International, 78 . pp. 448-464. ISSN 0963-9969

Molecular recognition

Ghorani, B., Tucker, N. and Yoshikawa, M. (2015) Approaches for the assembly of molecularly imprinted electrospun nanofibre membranes and consequent use in selected target recognition. Food Research International, 78 . pp. 448-464. ISSN 0963-9969

Multivariable control systems

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Neural networks

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Nonlinear systems

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

NotOAChecked

Dowding, Colin, Griffiths, Jonathan David and Lawrence, J. (2014) Characterization of the laser bonding of a linear low density polyethylene film to a polypropylene substrate. Lasers in Engineering, 28 (5-6). pp. 303-317. ISSN 0898-1507

Objective functions

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Occultation

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Oncology imaging

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

Optical

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

Optimization

Howell, M. N. and Gordon, Timothy (2001) Continuous action reinforcement learning automata and their application to adaptive digital filter design. Engineering Applications of Artificial Intelligence, 14 (5). pp. 549-561. ISSN 0952-1976

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Optimization problems

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Optimization, Stochastic learning automata, Genetic algorithms

Howell, M. N. and Gordon, Timothy (2000) On the genetic adaptation of stochastic learning automata. In: IEEE Conference on Evolutionary Computation, ICEC, 16 - 19 July 2000, La Jolla, CA, USA.

PID controllers, Automata theory

Howell, M. N., Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Parameter estimation

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Howell, M. N., Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Parameter tuning

Howell, M. N., Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Particles (particulate matter)

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Peel resistance, Adhesives

Dowding, Colin, Griffiths, Jonathan David and Lawrence, J. (2014) Characterization of the laser bonding of a linear low density polyethylene film to a polypropylene substrate. Lasers in Engineering, 28 (5-6). pp. 303-317. ISSN 0898-1507

Peel-seal

Dowding, Colin, Dowding, Robert, Griffiths, Jonathan David and Lawrence, Jonathan (2013) Peel resistance characterization of localized polymer film bonding via thin film adhesive thermally activated by scanned CO2 laser. Optics & Laser Technology, 48 . pp. 358-365. ISSN 0030-3992

Photodeposition

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Polymer

Dowding, Colin, Dowding, Robert, Griffiths, Jonathan David and Lawrence, Jonathan (2013) Peel resistance characterization of localized polymer film bonding via thin film adhesive thermally activated by scanned CO2 laser. Optics & Laser Technology, 48 . pp. 358-365. ISSN 0030-3992

Polymer deformation

Pokric, Boris, Allinson, Nigel, Ryan, Anthony J., Fairclough, Patrick, Dobson, Barry R., Derbyshire, Gareth E., Helsby, William, Long, Graham and Moon, Kevin (2002) A double area detector system for simultaneous small and wide-angle X-ray scattering. Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 477 (1-3). pp. 329-334. ISSN 0168-9002

Polymer solutions

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

Polypropylenes, Laser bonding

Dowding, Colin, Griffiths, Jonathan David and Lawrence, J. (2014) Characterization of the laser bonding of a linear low density polyethylene film to a polypropylene substrate. Lasers in Engineering, 28 (5-6). pp. 303-317. ISSN 0898-1507

Problem solving

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Proximal point method

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Radiometers, Solar equipment

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Random processes, Adaptive signal processing, Automata theory

Howell, M. N. and Gordon, Timothy (2001) Continuous action reinforcement learning automata and their application to adaptive digital filter design. Engineering Applications of Artificial Intelligence, 14 (5). pp. 549-561. ISSN 0952-1976

Random processes, Learning automata (LA), Automata theory

Howell, M. N., Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Random processes, Reinforcement learning automata

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Reconstruction problems

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Reduced parallax

Pokric, Boris, Allinson, Nigel, Ryan, Anthony J., Fairclough, Patrick, Dobson, Barry R., Derbyshire, Gareth E., Helsby, William, Long, Graham and Moon, Kevin (2002) A double area detector system for simultaneous small and wide-angle X-ray scattering. Nuclear Instruments and Methods in Physics Research. Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 477 (1-3). pp. 329-334. ISSN 0168-9002

Regularization terms

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Reinforcement learning techniques, Optimal control systems

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Riccati equations, Bellman equations

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Robotics platforms

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

SPECT

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

Semi-supervised learning

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Sleep Rhythms

Sen Bhattacharya, Basabdatta and Claxton, Jordan (2013) Combined study of time-series bifurcation and power spectral behaviour of a thalamo-cortico-thalamic neural mass model. BMC Neuroscience, 14 (Supp 1). p. 18. ISSN 1471-2202

Solar Occultation for Ice Experiment (SOFIE)

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Solar attenuation

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Sonography

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

State-of-the-art approach

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Stochastic learning automata, Adaptive filtering

Howell, M. N. and Gordon, Timothy (1998) Continuous learning automata and adaptive digital filter design. In: 1998 International Conference on Control, 1-4 September 1998, Swansea, Wales.

Supervised learning, Eye movements

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

TQCM, Contamination

Dyer, James, Herrick, Jim, Shumway, Andrew, Fish, Chad, Stauder, John, Schicker, Scott and Gordon, Timothy (2006) Control of molecular contamination and outgassing of the SOFIE instrument. In: Optical Systems Degradation, Contamination, and Stray Light: Effects, Measurements, and Control II, 15 - 16 August 2006, San Diego, California, USA.

Thalamic Interneurons

Sen Bhattacharya, Basabdatta and Claxton, Jordan (2013) Combined study of time-series bifurcation and power spectral behaviour of a thalamo-cortico-thalamic neural mass model. BMC Neuroscience, 14 (Supp 1). p. 18. ISSN 1471-2202

Thalamocortical Circuitry

Sen Bhattacharya, Basabdatta and Claxton, Jordan (2013) Combined study of time-series bifurcation and power spectral behaviour of a thalamo-cortico-thalamic neural mass model. BMC Neuroscience, 14 (Supp 1). p. 18. ISSN 1471-2202

Three term control systems, Continuous action reinforcement learning automata (CARLA)

Howell, M. N., Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Time of Arrival

Borman, Alexander J., Dowding, Colin F., Griffiths, Jonathan D. and Seddon, Dick (2017) Exploding foil initiator (EFI) modes of operation determined using down-barrel flyer layer velocity measurement. Propellants, Explosives, Pyrotechnics, 42 (3). pp. 318-328. ISSN 0721-3115

Top down models, Biomedical engineering

Xu, Jiawei and Yue, Shigang (2012) A top-down attention model based on the semi-supervised learning. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

Tv regularizations, Algorithms

Tang, Y., Peng, Jigen, Yue, Shigang and Xu, Jiawei (2012) A primal dual proximal point method of Chambolle-Pock algorithms for ℓ1-TV minimization problems in image reconstruction. In: 5th International Conference on Biomedical Engineering and Informatics, BMEI 2012, 16-18 October 2012, Chongqing, China.

US

Beyer, Thomas, Bidaut, Luc, Dickson, John, Kachelriess, Marc, Kiessling, Fabian, Leitgeb, Rainer, Ma, Jingfei, Sundar, Lalith Kumar Shiyam, Theek, Benjamin and Mawlawi, Osama (2020) What scans we will read: imaging instrumentation trends in clinical oncology. Cancer Imaging, 20 (1). ISSN 1470-7330

Variable length coding scheme

Chen, Jun and Mahfouf, Mahdi (2012) Improving transparency in approximate fuzzy modeling using multi-objective immune-inspired optimisation. International Journal of Computational Intelligence Systems, 5 (2). pp. 322-342. ISSN 1875-6891

Vehicle suspensions

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Vehicles, Automotive systems

Frost, G. P., Howell, M. N., Gordon, Timothy and Wu, Q. H. (1996) Dynamic vehicle roll control using reinforcement learning. In: 1996 UKACC International Conference on Control, 2-5 September 1996, Exeter, UK.

Viscosity

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

amorphous polymer melt

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

annealing

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

art jewellery

O'Hana, Sarah, Pinkerton, A. J., Shoba, Kalsang, Gale, A. W. and Li, L. (2008) Laser surface colouring of titanium for contemporary jewellery. Surface Engineering, 24 (2). pp. 147-153. ISSN 0267-0844

bioactive compounds

Alehosseini, Ali, Ghorani, Behrouz, Sarabi-Jamab, Mahboobe and Tucker, Nick (2018) Principles of electrospraying: a new approach in protection of bioactive compounds in foods. Critical Reviews in Food Science and Nutrition . ISSN 1040-8398

bioactivity

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

birefringence

Costanzo, A, Spotorno, R, Candal, M, Fernandez, M, Muller, A, Graham, R, Cavallo, D and McIlroy, Claire (2020) Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid. Additive Manufacturing, 36 . p. 101415. ISSN 2214-8604

calcium alginate

Mehregan, A. N., Kadkhodaee, R., Ghorani, B., Razzaq, H. and Tucker, N. (2015) Control of swelling and release rate of electrospray fabricated calcium alginate microparticles by freeze-thaw cycles. Quarterly Iranian Journal of Food Science and Technology, 13 (1). pp. 37-49. ISSN 14115-336

capsules

Alehosseini, Ali, Ghorani, Behrouz, Sarabi-Jamab, Mahboobe and Tucker, Nick (2018) Principles of electrospraying: a new approach in protection of bioactive compounds in foods. Critical Reviews in Food Science and Nutrition . ISSN 1040-8398

complex fluids

Hoath, Stephen D., Castrejón-Pita, José Rafael, Hsiao, Wen-Kai, Jung, Sungjune, Martin, Graham D., Hutchings, Ian M., Tuladhar, Tri R., Vadillo, Damien C., Butler, Simon A., Mackley, Malcolm R., McIlroy, Claire, Morrison, Neil F., Harlen, Oliver G. and Yow, Huai Nyin (Grace) (2013) Jetting of Complex Fluids. Journal of Imaging Science and Technology, 57 (4). pp. 1-10. ISSN 1062-3701

computational modelling

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

conservation of mass

Hebda, Michael, McIlroy, Claire, Whiteside, Ben, Caton-Rose, Fin and Coates, Phil (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Additive Manufacturing, 27 . pp. 99-108. ISSN 2214-8604

constitutive modles

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

cross-sectional geometry

Hebda, Michael, McIlroy, Claire, Whiteside, Ben, Caton-Rose, Fin and Coates, Phil (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Additive Manufacturing, 27 . pp. 99-108. ISSN 2214-8604

cyclodextrin

Fairbanks, Antony J., Le Corre-Bordes, Deborah, Lepe, Pablo G. T., Tucker, Nick and Staiger, Mark P. (2017) Electrospinning of 2-hydroxypropyl-β-cyclodextrin aqueous solutions with added salts. Mexican Journal of Materials Science and Engineering, 4 (1). pp. 21-33. ISSN 2395-9630

demand side management

Muralidharan, Amrutha, Maior, Horia and Rao, Shrisha (2018) A Self-Governing and Decentralized Network of Smart Objects to Share Electrical Power Autonomously. In: Sustainable Cloud and Energy Services. Springer, pp. 25-48. ISBN 978-3-319-62237-8, 978-3-319-62238-5

disentanglement

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

distributed algorithms

Muralidharan, Amrutha, Maior, Horia and Rao, Shrisha (2018) A Self-Governing and Decentralized Network of Smart Objects to Share Electrical Power Autonomously. In: Sustainable Cloud and Energy Services. Springer, pp. 25-48. ISBN 978-3-319-62237-8, 978-3-319-62238-5

electrical power

Muralidharan, Amrutha, Maior, Horia and Rao, Shrisha (2018) A Self-Governing and Decentralized Network of Smart Objects to Share Electrical Power Autonomously. In: Sustainable Cloud and Energy Services. Springer, pp. 25-48. ISBN 978-3-319-62237-8, 978-3-319-62238-5

electrospinning

Fairbanks, Antony J., Le Corre-Bordes, Deborah, Lepe, Pablo G. T., Tucker, Nick and Staiger, Mark P. (2017) Electrospinning of 2-hydroxypropyl-β-cyclodextrin aqueous solutions with added salts. Mexican Journal of Materials Science and Engineering, 4 (1). pp. 21-33. ISSN 2395-9630

Ghorani, B., Tucker, N. and Yoshikawa, M. (2015) Approaches for the assembly of molecularly imprinted electrospun nanofibre membranes and consequent use in selected target recognition. Food Research International, 78 . pp. 448-464. ISSN 0963-9969

electrospray

Mehregan, A. N., Kadkhodaee, R., Ghorani, B., Razzaq, H. and Tucker, N. (2015) Control of swelling and release rate of electrospray fabricated calcium alginate microparticles by freeze-thaw cycles. Quarterly Iranian Journal of Food Science and Technology, 13 (1). pp. 37-49. ISSN 14115-336

electrospraying

Alehosseini, Ali, Ghorani, Behrouz, Sarabi-Jamab, Mahboobe and Tucker, Nick (2018) Principles of electrospraying: a new approach in protection of bioactive compounds in foods. Critical Reviews in Food Science and Nutrition . ISSN 1040-8398

encapsulation

Alehosseini, Ali, Ghorani, Behrouz, Sarabi-Jamab, Mahboobe and Tucker, Nick (2018) Principles of electrospraying: a new approach in protection of bioactive compounds in foods. Critical Reviews in Food Science and Nutrition . ISSN 1040-8398

engineering techology

Readman, Jeff, Bessant, John, Neely, Andy and Twigg, David (2018) Positioning UK research and technology organizations as outward-facing technology-bases. R&D Management, 48 (1). pp. 109-120. ISSN 0033-6807

extrusion

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

fibres

Nurfaizey, A.H, Tucker, Nick, Stanger, J and Staiger, M.P (2012) Functional nanofibers in clothing for protection against chemical and biological hazards. In: Functional nanofibers and their applications. Woodhead Publishing Series in Textiles, 134 . The Textile Institute, Woodhead Publishing Ltd, pp. 236-258. ISBN 978-0-85709-069-0

flow-enhanced crystallisation

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

flow-enhanced crystallization

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

flow-induced crystallization

Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512

food contaminates

Ghorani, B., Tucker, N. and Yoshikawa, M. (2015) Approaches for the assembly of molecularly imprinted electrospun nanofibre membranes and consequent use in selected target recognition. Food Research International, 78 . pp. 448-464. ISSN 0963-9969

freeze-thaw

Mehregan, A. N., Kadkhodaee, R., Ghorani, B., Razzaq, H. and Tucker, N. (2015) Control of swelling and release rate of electrospray fabricated calcium alginate microparticles by freeze-thaw cycles. Quarterly Iranian Journal of Food Science and Technology, 13 (1). pp. 37-49. ISSN 14115-336

fused-filament fabrication

Hebda, Michael, McIlroy, Claire, Whiteside, Ben, Caton-Rose, Fin and Coates, Phil (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Additive Manufacturing, 27 . pp. 99-108. ISSN 2214-8604

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

history

Ghosal, K., Agatemor, C., Tucker, N., Kny, E. and Thomas, S. (2018) Electrical spinning to electrospinning: a brief history. In: Electrospinning: basic research to commercialization. Royal Society of Chemistry. ISBN 9781788011006

hydrogen bonding

Fairbanks, Antony J., Le Corre-Bordes, Deborah, Lepe, Pablo G. T., Tucker, Nick and Staiger, Mark P. (2017) Electrospinning of 2-hydroxypropyl-β-cyclodextrin aqueous solutions with added salts. Mexican Journal of Materials Science and Engineering, 4 (1). pp. 21-33. ISSN 2395-9630

infrastructure history

Whelan, Deborah (2015) Diluted by history: the extraordinary endeavour of the Winterton Irrigation Settlement. In: South African Historical Society Biennial Conference, 2-4 July 2015, Stellenbosch.

inkjet printing

Hoath, Stephen D., Castrejón-Pita, José Rafael, Hsiao, Wen-Kai, Jung, Sungjune, Martin, Graham D., Hutchings, Ian M., Tuladhar, Tri R., Vadillo, Damien C., Butler, Simon A., Mackley, Malcolm R., McIlroy, Claire, Morrison, Neil F., Harlen, Oliver G. and Yow, Huai Nyin (Grace) (2013) Jetting of Complex Fluids. Journal of Imaging Science and Technology, 57 (4). pp. 1-10. ISSN 1062-3701

inkjet technology

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

innovation

Readman, Jeff, Bessant, John, Neely, Andy and Twigg, David (2018) Positioning UK research and technology organizations as outward-facing technology-bases. R&D Management, 48 (1). pp. 109-120. ISSN 0033-6807

inter-diffusion

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

jet breakup

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

laser

O'Hana, Sarah, Pinkerton, A. J., Shoba, Kalsang, Gale, A. W. and Li, L. (2008) Laser surface colouring of titanium for contemporary jewellery. Surface Engineering, 24 (2). pp. 147-153. ISSN 0267-0844

membrane

Ghorani, B., Tucker, N. and Yoshikawa, M. (2015) Approaches for the assembly of molecularly imprinted electrospun nanofibre membranes and consequent use in selected target recognition. Food Research International, 78 . pp. 448-464. ISSN 0963-9969

molecular orientation

Costanzo, A, Spotorno, R, Candal, M, Fernandez, M, Muller, A, Graham, R, Cavallo, D and McIlroy, Claire (2020) Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid. Additive Manufacturing, 36 . p. 101415. ISSN 2214-8604

nanofibre

Fairbanks, Antony J., Le Corre-Bordes, Deborah, Lepe, Pablo G. T., Tucker, Nick and Staiger, Mark P. (2017) Electrospinning of 2-hydroxypropyl-β-cyclodextrin aqueous solutions with added salts. Mexican Journal of Materials Science and Engineering, 4 (1). pp. 21-33. ISSN 2395-9630

nanofibres

Ghorani, B., Tucker, N. and Yoshikawa, M. (2015) Approaches for the assembly of molecularly imprinted electrospun nanofibre membranes and consequent use in selected target recognition. Food Research International, 78 . pp. 448-464. ISSN 0963-9969

nanoparticles

Alehosseini, Ali, Ghorani, Behrouz, Sarabi-Jamab, Mahboobe and Tucker, Nick (2018) Principles of electrospraying: a new approach in protection of bioactive compounds in foods. Critical Reviews in Food Science and Nutrition . ISSN 1040-8398

nanotechnology

Nurfaizey, A.H, Tucker, Nick, Stanger, J and Staiger, M.P (2012) Functional nanofibers in clothing for protection against chemical and biological hazards. In: Functional nanofibers and their applications. Woodhead Publishing Series in Textiles, 134 . The Textile Institute, Woodhead Publishing Ltd, pp. 236-258. ISBN 978-0-85709-069-0

non-isothermal

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

nylon 66

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

osteoblast cells

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

poly lactic acid

Costanzo, A, Spotorno, R, Candal, M, Fernandez, M, Muller, A, Graham, R, Cavallo, D and McIlroy, Claire (2020) Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid. Additive Manufacturing, 36 . p. 101415. ISSN 2214-8604

polycaprolactone

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

polylactic acid

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

polymer melt

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

polymer processing

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

positioning

Readman, Jeff, Bessant, John, Neely, Andy and Twigg, David (2018) Positioning UK research and technology organizations as outward-facing technology-bases. R&D Management, 48 (1). pp. 109-120. ISSN 0033-6807

regenerative medicine

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

research and development

Readman, Jeff, Bessant, John, Neely, Andy and Twigg, David (2018) Positioning UK research and technology organizations as outward-facing technology-bases. R&D Management, 48 (1). pp. 109-120. ISSN 0033-6807

resource allocation

Muralidharan, Amrutha, Maior, Horia and Rao, Shrisha (2018) A Self-Governing and Decentralized Network of Smart Objects to Share Electrical Power Autonomously. In: Sustainable Cloud and Energy Services. Springer, pp. 25-48. ISBN 978-3-319-62237-8, 978-3-319-62238-5

safe delivery system

Alehosseini, Ali, Ghorani, Behrouz, Sarabi-Jamab, Mahboobe and Tucker, Nick (2018) Principles of electrospraying: a new approach in protection of bioactive compounds in foods. Critical Reviews in Food Science and Nutrition . ISSN 1040-8398

semi-crystalline polymer melt

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

simulation tools

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

social history

Whelan, Deborah (2015) Diluted by history: the extraordinary endeavour of the Winterton Irrigation Settlement. In: South African Historical Society Biennial Conference, 2-4 July 2015, Stellenbosch.

surface tension

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

titanium oxide

O'Hana, Sarah, Pinkerton, A. J., Shoba, Kalsang, Gale, A. W. and Li, L. (2008) Laser surface colouring of titanium for contemporary jewellery. Surface Engineering, 24 (2). pp. 147-153. ISSN 0267-0844

weld strength

Costanzo, A, Spotorno, R, Candal, M, Fernandez, M, Muller, A, Graham, R, Cavallo, D and McIlroy, Claire (2020) Residual alignment and its effect on weld strength in material-extrusion 3D-printing of polylactic acid. Additive Manufacturing, 36 . p. 101415. ISSN 2214-8604

welding

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

wettability

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

This list was generated on Mon Aug 10 23:38:41 2020 BST.