Items where Subject is "H Engineering > H680 Optoelectronic Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
ANSYS Ablation Ablation Rate Ablation Threshold Aircraft Al2O3 Alumina Beam delivery Bio-ceramic Bioceramic Bisphenol A Polycarbonate Bonding Building materials CO2 laser Ceramic Ceramic tiles Closed Liquid Immersion Concrete Contact angle Corrosion Debris Control Enamel Engraving Epoxy tile grout Erosion Etch Rate Excimer Feature Excimer laser Flow Velocity Gas Glaze Glazing Grout High power diode laser High power diode laser (HPDL) Interaction characteristics KrF excimer laser Laser Life characteristics Liquid Chemistry Liquid Immersion Marking Nd:YAG laser Open Thin Film Open Thin Film Liquid Immersion Ordinary Portland cement Ordinary Portland cement (OPC) Partially stabilised zirconia (PSZ) Plume Distortion Polymethyl methacrylate (PMMA) Quality Refractory Removal Repair Safety Single-stage seal Surface energy Surface glazing Thermal loading Thin Film Liquid Immersion Threshold fluence Tile Topography Wear Wettability absorption adhesion alpha-Alumina alumina analytical model beam interaction bending bio-implant materials bioactivity biomedical bmjdoid bmjexample bond strength bonding cell response cement ceramic ceramic tiles chemical coating concrete constitutional supercooling contact angle corrosion corrosion resistance curvature debris control dentistry deposition diode enamel enamelling engineering materials erosion excimer laser finite element (FE) flowing liquid immersion forming gas glass glaze glazing grout grout characteristics grout sealing high power diode laser high power diode laser (HPDL) high-power diode laser laser laser applications laser materials laser materials processing laser modification laser surface load-bearing capacity magnesia magnesia partially stabilized zirconia (MgO-PSZ) materials processing mechanical melt depth melting metal micromachining microstructure mild steel mortar optimisation ordinary Portland cement ordinary Portland cement (OPC) osteoblast cells oxide permeability phase physical polar component polyethylene (PE) processing research properties rapid solidification refractory removal roughness sealing sealing system sheet silica solidification steel stress distribution surface surface energy surface glazing surface modification surface modi® cation surface oxygen surface roughness surface treatment technology testing tin tin oxide titanium alloy vitreous enamel vitrification vitrify wear wear life wear life characteristics wetabillity wettability
Number of items at this level: 420.

ANSYS

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

Ablation

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Ablation Rate

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Ablation Threshold

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Aircraft

Lawrence, Jonathan (2006) A high power diode laser (HPDL)-based technique for the bonding of composite patches to aluminium alloys on various military aircraft. Journal of Laser Applications, 18 (2). pp. 151-155. ISSN 1042-346X

Al2O3

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

Alumina

Lawrence, Jonathan (2004) Wetting and bonding characteristics of selected liquid-metals with a high power diode laser treated alumina bioceramic. Proceeding of the Royal Society (A): Mathematical, Physical & Engineering Sciences, 460 (2046). pp. 1723-1735. ISSN 1364-5021

Beam delivery

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Bio-ceramic

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Bioceramic

Lawrence, Jonathan (2004) Wetting and bonding characteristics of selected liquid-metals with a high power diode laser treated alumina bioceramic. Proceeding of the Royal Society (A): Mathematical, Physical & Engineering Sciences, 460 (2046). pp. 1723-1735. ISSN 1364-5021

Lawrence, Jonathan (2004) An analysis of the beam interaction characteristics of selected lasers with an alpha-alumina bioceramic. Optics and Lasers in Engineering, 41 (3). pp. 505-514. ISSN 0143-8166

Bisphenol A Polycarbonate

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Bonding

Lawrence, Jonathan (2004) Wetting and bonding characteristics of selected liquid-metals with a high power diode laser treated alumina bioceramic. Proceeding of the Royal Society (A): Mathematical, Physical & Engineering Sciences, 460 (2046). pp. 1723-1735. ISSN 1364-5021

Building materials

Li, Lin and Lawrence, Jonathan and Spencer, Julian T. (1997) High power diode laser marking and engraving of building materials. In: Europto�97 Lasers in Material Processing, 16-20 June 1997, Munich.

CO2 laser

Hao, Liang and Lawrence, Jonathan (2004) On the role of laser-induced microstructures in influencing the surface energy of magnesia partially stabilized zirconia bioceramic. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 218 (1). pp. 59-76. ISSN 0954-4054

Lawrence, Jonathan (2004) A comparative analysis of the wear characteristics of glazes generated on the ordinary Portland cement surface of concrete by means of CO2 and high power diode laser radiation. Wear, 257 (5-6). pp. 590-598. ISSN 0043-1648

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2001) Modification of the wettability characteristics of polymethyl methacrylate (PMMA) by means of CO2, Nd:YAG, excimer and high power diode laser radiation. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 303 (1-2). pp. 142-149. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of a modified mild steel with CO2, Nd:YAG, excimer and high power diode lasers. Journal of Physics D: Applied Physics, 32 (18). pp. 2311-2318. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of an Al2O3/SiO2-based ceramic modified with CO2, Nd:YAG, excimer and high-power diode lasers. Journal of Physics D: Applied Physics, 32 (10). p. 1075. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2001) Wettability characteristics of polyethylene (PE) modified with CO2, Nd:YAG, excimer and high power diode lasers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (12). pp. 1735-1744. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (1998) Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics. In: The 17th International Congress on Applications of Lasers and Electro-Optics (ICALEO �98), 16-19 November 1998, Orlando.

Ceramic

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Ceramic tiles

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Closed Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Concrete

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Contact angle

Lawrence, Jonathan (2003) Identification of the principal elements governing the wettability characteristics of ordinary Portland cement following high power diode laser surface treatment. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 356 (1-2). pp. 162-172. ISSN 0921-5093

Corrosion

Lawrence, Jonathan and Li, Lin (2003) Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment. Journal of Materials Processing Technology, 142 (2). pp. 461-465. ISSN 0924-0136

Debris Control

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Enamel

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Engraving

Li, Lin and Lawrence, Jonathan and Spencer, Julian T. (1997) High power diode laser marking and engraving of building materials. In: Europto�97 Lasers in Material Processing, 16-20 June 1997, Munich.

Epoxy tile grout

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Erosion

Lawrence, Jonathan and Li, Lin (2003) Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment. Journal of Materials Processing Technology, 142 (2). pp. 461-465. ISSN 0924-0136

Etch Rate

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Excimer Feature

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Excimer laser

Lawrence, Jonathan and Li, Lin (2001) Modification of the wettability characteristics of polymethyl methacrylate (PMMA) by means of CO2, Nd:YAG, excimer and high power diode laser radiation. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 303 (1-2). pp. 142-149. ISSN 0921-5093

Flow Velocity

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Gas

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Glaze

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Glazing

Lawrence, Jonathan (2003) Identification of the principal elements governing the wettability characteristics of ordinary Portland cement following high power diode laser surface treatment. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 356 (1-2). pp. 162-172. ISSN 0921-5093

Grout

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

High power diode laser

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode laser and the effects of large beam geometry. Optics & Laser Technology, 31 (8). pp. 583-591. ISSN 0030-3992

High power diode laser (HPDL)

Lawrence, Jonathan (2003) Identification of the principal elements governing the wettability characteristics of ordinary Portland cement following high power diode laser surface treatment. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 356 (1-2). pp. 162-172. ISSN 0921-5093

Lawrence, Jonathan (2004) Wetting and bonding characteristics of selected liquid-metals with a high power diode laser treated alumina bioceramic. Proceeding of the Royal Society (A): Mathematical, Physical & Engineering Sciences, 460 (2046). pp. 1723-1735. ISSN 1364-5021

Lawrence, Jonathan (2004) A comparative analysis of the wear characteristics of glazes generated on the ordinary Portland cement surface of concrete by means of CO2 and high power diode laser radiation. Wear, 257 (5-6). pp. 590-598. ISSN 0043-1648

Lawrence, Jonathan (2006) A high power diode laser (HPDL)-based technique for the bonding of composite patches to aluminium alloys on various military aircraft. Journal of Laser Applications, 18 (2). pp. 151-155. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (2003) Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment. Journal of Materials Processing Technology, 142 (2). pp. 461-465. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2001) Modification of the wettability characteristics of polymethyl methacrylate (PMMA) by means of CO2, Nd:YAG, excimer and high power diode laser radiation. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 303 (1-2). pp. 142-149. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Interaction characteristics

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Lawrence, Jonathan (2004) An analysis of the beam interaction characteristics of selected lasers with an alpha-alumina bioceramic. Optics and Lasers in Engineering, 41 (3). pp. 505-514. ISSN 0143-8166

KrF excimer laser

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Laser

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Lawrence, Jonathan (2004) An analysis of the beam interaction characteristics of selected lasers with an alpha-alumina bioceramic. Optics and Lasers in Engineering, 41 (3). pp. 505-514. ISSN 0143-8166

Life characteristics

Lawrence, Jonathan (2004) A comparative analysis of the wear characteristics of glazes generated on the ordinary Portland cement surface of concrete by means of CO2 and high power diode laser radiation. Wear, 257 (5-6). pp. 590-598. ISSN 0043-1648

Lawrence, Jonathan and Li, Lin (2003) Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment. Journal of Materials Processing Technology, 142 (2). pp. 461-465. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Liquid Chemistry

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Marking

Li, Lin and Lawrence, Jonathan and Spencer, Julian T. (1997) High power diode laser marking and engraving of building materials. In: Europto�97 Lasers in Material Processing, 16-20 June 1997, Munich.

Nd:YAG laser

Lawrence, Jonathan and Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2001) Modification of the wettability characteristics of polymethyl methacrylate (PMMA) by means of CO2, Nd:YAG, excimer and high power diode laser radiation. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 303 (1-2). pp. 142-149. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of a modified mild steel with CO2, Nd:YAG, excimer and high power diode lasers. Journal of Physics D: Applied Physics, 32 (18). pp. 2311-2318. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of an Al2O3/SiO2-based ceramic modified with CO2, Nd:YAG, excimer and high-power diode lasers. Journal of Physics D: Applied Physics, 32 (10). p. 1075. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2001) Wettability characteristics of polyethylene (PE) modified with CO2, Nd:YAG, excimer and high power diode lasers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (12). pp. 1735-1744. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (1998) Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics. In: The 17th International Congress on Applications of Lasers and Electro-Optics (ICALEO �98), 16-19 November 1998, Orlando.

Open Thin Film

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Open Thin Film Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Ordinary Portland cement

Lawrence, Jonathan (2004) A comparative analysis of the wear characteristics of glazes generated on the ordinary Portland cement surface of concrete by means of CO2 and high power diode laser radiation. Wear, 257 (5-6). pp. 590-598. ISSN 0043-1648

Ordinary Portland cement (OPC)

Lawrence, Jonathan (2003) Identification of the principal elements governing the wettability characteristics of ordinary Portland cement following high power diode laser surface treatment. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 356 (1-2). pp. 162-172. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Partially stabilised zirconia (PSZ)

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Plume Distortion

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Polymethyl methacrylate (PMMA)

Lawrence, Jonathan and Li, Lin (2001) Modification of the wettability characteristics of polymethyl methacrylate (PMMA) by means of CO2, Nd:YAG, excimer and high power diode laser radiation. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 303 (1-2). pp. 142-149. ISSN 0921-5093

Quality

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Refractory

Lawrence, Jonathan and Li, Lin (2003) Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment. Journal of Materials Processing Technology, 142 (2). pp. 461-465. ISSN 0924-0136

Removal

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Repair

Lawrence, Jonathan (2006) A high power diode laser (HPDL)-based technique for the bonding of composite patches to aluminium alloys on various military aircraft. Journal of Laser Applications, 18 (2). pp. 151-155. ISSN 1042-346X

Safety

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Single-stage seal

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Surface energy

Lawrence, Jonathan (2003) Identification of the principal elements governing the wettability characteristics of ordinary Portland cement following high power diode laser surface treatment. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 356 (1-2). pp. 162-172. ISSN 0921-5093

Surface glazing

Lawrence, Jonathan (2004) A comparative analysis of the wear characteristics of glazes generated on the ordinary Portland cement surface of concrete by means of CO2 and high power diode laser radiation. Wear, 257 (5-6). pp. 590-598. ISSN 0043-1648

Lawrence, Jonathan and Li, Lin (2003) Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment. Journal of Materials Processing Technology, 142 (2). pp. 461-465. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Thermal loading

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Thin Film Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Threshold fluence

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Tile

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Topography

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Wear

Lawrence, Jonathan (2004) A comparative analysis of the wear characteristics of glazes generated on the ordinary Portland cement surface of concrete by means of CO2 and high power diode laser radiation. Wear, 257 (5-6). pp. 590-598. ISSN 0043-1648

Lawrence, Jonathan and Li, Lin (2003) Augmentation of the mechanical and chemical resistance characteristics of an Al2O3-based refractory by means of high power diode laser surface treatment. Journal of Materials Processing Technology, 142 (2). pp. 461-465. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Wettability

Lawrence, Jonathan (2003) Identification of the principal elements governing the wettability characteristics of ordinary Portland cement following high power diode laser surface treatment. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 356 (1-2). pp. 162-172. ISSN 0921-5093

Lawrence, Jonathan (2004) Wetting and bonding characteristics of selected liquid-metals with a high power diode laser treated alumina bioceramic. Proceeding of the Royal Society (A): Mathematical, Physical & Engineering Sciences, 460 (2046). pp. 1723-1735. ISSN 1364-5021

Lawrence, Jonathan and Li, Lin (2001) Modification of the wettability characteristics of polymethyl methacrylate (PMMA) by means of CO2, Nd:YAG, excimer and high power diode laser radiation. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 303 (1-2). pp. 142-149. ISSN 0921-5093

absorption

Lawrence, Jonathan and Johnston, Emma P. and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement. Journal of Physics D: Applied Physics, 33 (8). pp. 945-947. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Minami, Kanaka and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material. Applied Surface Science, 186 (1-4). pp. 162-165. ISSN 0169-4332

adhesion

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) High power diode laser modification of the wettability characteristics of an Al2O3/SiO2 based oxide compound for improved enamelling. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 266 (1-2). pp. 167-174. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence, Jonathan and Lubrani, Peter and Li, Lin (2001) On the selective deposition of tin and tin oxide on various glasses using a high power diode laser. Surface and Coatings Technology, 137 (2-3). pp. 235-240. ISSN 0257-8972

Lawrence , Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

alpha-Alumina

Lawrence, Jonathan (2004) An analysis of the beam interaction characteristics of selected lasers with an alpha-alumina bioceramic. Optics and Lasers in Engineering, 41 (3). pp. 505-514. ISSN 0143-8166

alumina

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) The effects of high power diode laser radiation on the wettability, adhesion and bonding characteristics of an alumina/silica-based oxide and vitreous enamel. Surface & Coatings Technology, 115 (2-3). pp. 273-281. ISSN 0257-8972

analytical model

Lawrence, Jonathan and Peligrad, Alexandrou and Zhou, E. and Li, Lin and Morton, D. (2001) Prediction of melt depth in selected architectural materials during high power diode laser treatment. Optics and Lasers in Engineering, 35 (1). pp. 51-62. ISSN 0143-8166

beam interaction

Li, Lin and Lawrence, Jonathan and Spencer, Julian T. (1996) Laser materials processing with diode lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

bending

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin (2001) The forming of mild steel plates with a 2.5 kW high power diode laser. International Journal of Machine Tools & Manufacture: Design, Research and Application, 41 (7). pp. 967-977. ISSN 0890-6955

bio-implant materials

Hao, Liang and Lawrence, Jonathan (2005) Laser surface treatment of bio-implant materials. John Wiley and Sons, Chicester. ISBN 9780470016879, 9780470033975 (online)

bioactivity

Lawrence, Jonathan and Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

biomedical

Waugh, David and Lawrence, Jonathan (2012) Laser surface processing of polymers for biomedical applications. In: Laser assisted fabrication of materials. Springer Series in Materials Science . Springer-Verlag, Berlin. ISBN 9783642283581

bmjdoid

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

bmjexample

Lawrence, Jonathan and Li, Lin (2001) The effects of process gas type on the surface condition of high power diode laser treated ordinary Portland cement. Optics and Lasers in Engineering, 36 (6). pp. 599-605. ISSN 0143-8166

bond strength

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

bonding

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

cell response

Waugh, David and Lawrence, Jonathan (2012) Laser surface processing of polymers for biomedical applications. In: Laser assisted fabrication of materials. Springer Series in Materials Science . Springer-Verlag, Berlin. ISBN 9783642283581

cement

Lawrence, Jonathan and Johnston, Emma P. and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement. Journal of Physics D: Applied Physics, 33 (8). pp. 945-947. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

ceramic

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) Diode laser modification of ceramic material surface properties for improved wettability and adhesion. Applied Surface Science, 138-13 . pp. 388-393. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (2006) Ceramic tile grout removal & sealing using high power lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (1998) Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics. In: The 17th International Congress on Applications of Lasers and Electro-Optics (ICALEO �98), 16-19 November 1998, Orlando.

Lawrence, Jonathan and Peligrad, Alexandrou and Zhou, E. and Li, Lin and Morton, D. (2001) Prediction of melt depth in selected architectural materials during high power diode laser treatment. Optics and Lasers in Engineering, 35 (1). pp. 51-62. ISSN 0143-8166

ceramic tiles

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence , Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

chemical

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

coating

Lawrence, Jonathan and Li, Lin (2001) A laser-based technique for the coating of mild steel with a vitreous enamel. Surface & Coatings Technology, 140 (3). pp. 238-243. ISSN 0257-8972

concrete

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode lase. In: The 18th International Congress on Applications of Lasers and Electro-Optics (ICALEO �99), 15-18 November 1999, San Diego.

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode laser and the effects of large beam geometry. Optics & Laser Technology, 31 (8). pp. 583-591. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2001) The effects of process gas type on the surface condition of high power diode laser treated ordinary Portland cement. Optics and Lasers in Engineering, 36 (6). pp. 599-605. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

constitutional supercooling

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

contact angle

Hao, Liang and Lawrence, Jonathan (2003) Wettability characteristics modification of a magnesia partially stabilized zirconia using laser treatment and fundamental mechanism analysis. In: Recent Research Developments in Materials Science and Engineering. Transworld Research Network / Research Signpost, India, pp. 159-184. ISBN 9788178950570

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) Diode laser modification of ceramic material surface properties for improved wettability and adhesion. Applied Surface Science, 138-13 . pp. 388-393. ISSN 0169-4332

corrosion

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

corrosion resistance

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

curvature

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

debris control

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

dentistry

Lawrence, Jonathan (2002) On the potential role of the high power diode laser in modern dentistry. Independent Dentistry, 3 (1). pp. 34-36. ISSN 1466-0679

deposition

Lawrence, Jonathan and Lubrani, Peter and Li, Lin (2001) On the selective deposition of tin and tin oxide on various glasses using a high power diode laser. Surface and Coatings Technology, 137 (2-3). pp. 235-240. ISSN 0257-8972

diode

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

enamel

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2001) The influence of a high power diode laser (HPDL) generated glaze on the wetting characteristics and the subsequent HPDL enamelling of ordinary Portland cement. Surface and Coatings Technology, 137 (1). pp. 77-85. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin (2001) A laser-based technique for the coating of mild steel with a vitreous enamel. Surface & Coatings Technology, 140 (3). pp. 238-243. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) High power diode laser modification of the wettability characteristics of an Al2O3/SiO2 based oxide compound for improved enamelling. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 266 (1-2). pp. 167-174. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) The effects of high power diode laser radiation on the wettability, adhesion and bonding characteristics of an alumina/silica-based oxide and vitreous enamel. Surface & Coatings Technology, 115 (2-3). pp. 273-281. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence , Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

enamelling

British Nuclear Fuels PLC; J.T. Spencer; L.Li; J. Lawrence (1999) A method of improving wettability and enamelling. .

engineering materials

Lawrence, Jonathan and Li, Lin (2001) Laser modification of the wettability characteristics of engineering materials. Engineering Materials Series ERS Publication 3 . The Institution of Mechanical Engineers, Professional Engineering Publishing, London. ISBN 9781860582936

erosion

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

excimer laser

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of a modified mild steel with CO2, Nd:YAG, excimer and high power diode lasers. Journal of Physics D: Applied Physics, 32 (18). pp. 2311-2318. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of an Al2O3/SiO2-based ceramic modified with CO2, Nd:YAG, excimer and high-power diode lasers. Journal of Physics D: Applied Physics, 32 (10). p. 1075. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2001) Wettability characteristics of polyethylene (PE) modified with CO2, Nd:YAG, excimer and high power diode lasers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (12). pp. 1735-1744. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (1998) Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics. In: The 17th International Congress on Applications of Lasers and Electro-Optics (ICALEO �98), 16-19 November 1998, Orlando.

finite element (FE)

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

flowing liquid immersion

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

forming

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin (2001) The forming of mild steel plates with a 2.5 kW high power diode laser. International Journal of Machine Tools & Manufacture: Design, Research and Application, 41 (7). pp. 967-977. ISSN 0890-6955

gas

Lawrence, Jonathan and Li, Lin (2001) The effects of process gas type on the surface condition of high power diode laser treated ordinary Portland cement. Optics and Lasers in Engineering, 36 (6). pp. 599-605. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

glass

Lawrence, Jonathan and Lubrani, Peter and Li, Lin (2001) On the selective deposition of tin and tin oxide on various glasses using a high power diode laser. Surface and Coatings Technology, 137 (2-3). pp. 235-240. ISSN 0257-8972

glaze

Lawrence, Jonathan and Li, Lin (2001) The effects of process gas type on the surface condition of high power diode laser treated ordinary Portland cement. Optics and Lasers in Engineering, 36 (6). pp. 599-605. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2001) A laser-based technique for the coating of mild steel with a vitreous enamel. Surface & Coatings Technology, 140 (3). pp. 238-243. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence , Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

glazing

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode lase. In: The 18th International Congress on Applications of Lasers and Electro-Optics (ICALEO �99), 15-18 November 1999, San Diego.

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode laser and the effects of large beam geometry. Optics & Laser Technology, 31 (8). pp. 583-591. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2001) The influence of a high power diode laser (HPDL) generated glaze on the wetting characteristics and the subsequent HPDL enamelling of ordinary Portland cement. Surface and Coatings Technology, 137 (1). pp. 77-85. ISSN 0257-8972

grout

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (2006) Ceramic tile grout removal & sealing using high power lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

Lawrence, Jonathan and Minami, Kanaka and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material. Applied Surface Science, 186 (1-4). pp. 162-165. ISSN 0169-4332

Lawrence , Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

British Nuclear Fuels PLC (1997) Grout or mortar removal by lasers. .

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

grout characteristics

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

grout sealing

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

high power diode laser

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) Diode laser modification of ceramic material surface properties for improved wettability and adhesion. Applied Surface Science, 138-13 . pp. 388-393. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence , Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

high power diode laser (HPDL)

Lawrence, Jonathan (2002) On the potential role of the high power diode laser in modern dentistry. Independent Dentistry, 3 (1). pp. 34-36. ISSN 1466-0679

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (2002) On the mechanisms of wetting characteristics modification for selected metallic materials by means of high power diode laser radiation. Journal of laser applications, 14 (2). pp. 107-113. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode lase. In: The 18th International Congress on Applications of Lasers and Electro-Optics (ICALEO �99), 15-18 November 1999, San Diego.

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of a modified mild steel with CO2, Nd:YAG, excimer and high power diode lasers. Journal of Physics D: Applied Physics, 32 (18). pp. 2311-2318. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of an Al2O3/SiO2-based ceramic modified with CO2, Nd:YAG, excimer and high-power diode lasers. Journal of Physics D: Applied Physics, 32 (10). p. 1075. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2001) Wettability characteristics of polyethylene (PE) modified with CO2, Nd:YAG, excimer and high power diode lasers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (12). pp. 1735-1744. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2001) The effects of process gas type on the surface condition of high power diode laser treated ordinary Portland cement. Optics and Lasers in Engineering, 36 (6). pp. 599-605. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2001) The influence of a high power diode laser (HPDL) generated glaze on the wetting characteristics and the subsequent HPDL enamelling of ordinary Portland cement. Surface and Coatings Technology, 137 (1). pp. 77-85. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2001) A laser-based technique for the coating of mild steel with a vitreous enamel. Surface & Coatings Technology, 140 (3). pp. 238-243. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) High power diode laser modification of the wettability characteristics of an Al2O3/SiO2 based oxide compound for improved enamelling. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 266 (1-2). pp. 167-174. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (2006) Ceramic tile grout removal & sealing using high power lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (1998) Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics. In: The 17th International Congress on Applications of Lasers and Electro-Optics (ICALEO �98), 16-19 November 1998, Orlando.

Lawrence, Jonathan and Lubrani, Peter and Li, Lin (2001) On the selective deposition of tin and tin oxide on various glasses using a high power diode laser. Surface and Coatings Technology, 137 (2-3). pp. 235-240. ISSN 0257-8972

Lawrence, Jonathan and Peligrad, Alexandrou and Zhou, E. and Li, Lin and Morton, D. (2001) Prediction of melt depth in selected architectural materials during high power diode laser treatment. Optics and Lasers in Engineering, 35 (1). pp. 51-62. ISSN 0143-8166

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin (2001) The forming of mild steel plates with a 2.5 kW high power diode laser. International Journal of Machine Tools & Manufacture: Design, Research and Application, 41 (7). pp. 967-977. ISSN 0890-6955

Li, Lin and Lawrence, Jonathan and Spencer, Julian T. (1997) High power diode laser marking and engraving of building materials. In: Europto�97 Lasers in Material Processing, 16-20 June 1997, Munich.

Li, Lin and Lawrence, Jonathan and Spencer, Julian T. (1996) Laser materials processing with diode lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

high-power diode laser

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) The effects of high power diode laser radiation on the wettability, adhesion and bonding characteristics of an alumina/silica-based oxide and vitreous enamel. Surface & Coatings Technology, 115 (2-3). pp. 273-281. ISSN 0257-8972

laser

Hao, Liang and Lawrence, Jonathan (2003) Wettability characteristics modification of a magnesia partially stabilized zirconia using laser treatment and fundamental mechanism analysis. In: Recent Research Developments in Materials Science and Engineering. Transworld Research Network / Research Signpost, India, pp. 159-184. ISBN 9788178950570

Hao, Liang and Lawrence, Jonathan (2005) Laser surface treatment of bio-implant materials. John Wiley and Sons, Chicester. ISBN 9780470016879, 9780470033975 (online)

Lawrence, Jonathan (2002) On the potential role of the high power diode laser in modern dentistry. Independent Dentistry, 3 (1). pp. 34-36. ISSN 1466-0679

Lawrence, Jonathan and Johnston, Emma P. and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement. Journal of Physics D: Applied Physics, 33 (8). pp. 945-947. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

British Nuclear Fuels PLC; J.T. Spencer; L.Li; J. Lawrence (1999) A method of improving wettability and enamelling. .

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

Lawrence, Jonathan and Minami, Kanaka and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material. Applied Surface Science, 186 (1-4). pp. 162-165. ISSN 0169-4332

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

Lawrence , Jonathan and Pou, Juan and Low, David K. Y. and Toyserkani, Ehsan (2010) Advances in laser materials processing: Technology, research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746

British Nuclear Fuels PLC (1997) Grout or mortar removal by lasers. .

Waugh, David and Lawrence, Jonathan (2012) Laser surface processing of polymers for biomedical applications. In: Laser assisted fabrication of materials. Springer Series in Materials Science . Springer-Verlag, Berlin. ISBN 9783642283581

laser applications

Lawrence , Jonathan and Pou, Juan and Low, David K. Y. and Toyserkani, Ehsan (2010) Advances in laser materials processing: Technology, research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746

laser materials

Lawrence, Jonathan and Low, David K. Y. (2006) Advances in laser materials processing research and applications. Trivandrum: Transworld Research Network. ISBN 8130800780

laser materials processing

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

laser modification

Lawrence, Jonathan and Li, Lin (2001) Laser modification of the wettability characteristics of engineering materials. Engineering Materials Series ERS Publication 3 . The Institution of Mechanical Engineers, Professional Engineering Publishing, London. ISBN 9781860582936

laser surface

Hao, Liang and Lawrence, Jonathan (2005) Laser surface treatment of bio-implant materials. John Wiley and Sons, Chicester. ISBN 9780470016879, 9780470033975 (online)

load-bearing capacity

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

magnesia

Hao, Liang and Lawrence, Jonathan (2003) Wettability characteristics modification of a magnesia partially stabilized zirconia using laser treatment and fundamental mechanism analysis. In: Recent Research Developments in Materials Science and Engineering. Transworld Research Network / Research Signpost, India, pp. 159-184. ISBN 9788178950570

magnesia partially stabilized zirconia (MgO-PSZ)

Hao, Liang and Lawrence, Jonathan (2004) On the role of laser-induced microstructures in influencing the surface energy of magnesia partially stabilized zirconia bioceramic. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 218 (1). pp. 59-76. ISSN 0954-4054

materials processing

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin (2001) The forming of mild steel plates with a 2.5 kW high power diode laser. International Journal of Machine Tools & Manufacture: Design, Research and Application, 41 (7). pp. 967-977. ISSN 0890-6955

Li, Lin and Lawrence, Jonathan and Spencer, Julian T. (1996) Laser materials processing with diode lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

mechanical

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

melt depth

Lawrence, Jonathan and Peligrad, Alexandrou and Zhou, E. and Li, Lin and Morton, D. (2001) Prediction of melt depth in selected architectural materials during high power diode laser treatment. Optics and Lasers in Engineering, 35 (1). pp. 51-62. ISSN 0143-8166

melting

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) High power diode laser modification of the wettability characteristics of an Al2O3/SiO2 based oxide compound for improved enamelling. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 266 (1-2). pp. 167-174. ISSN 0921-5093

metal

Lawrence, Jonathan and Li, Lin (2002) On the mechanisms of wetting characteristics modification for selected metallic materials by means of high power diode laser radiation. Journal of laser applications, 14 (2). pp. 107-113. ISSN 1042-346X

micromachining

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

microstructure

Hao, Liang and Lawrence, Jonathan (2004) On the role of laser-induced microstructures in influencing the surface energy of magnesia partially stabilized zirconia bioceramic. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 218 (1). pp. 59-76. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

mild steel

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2001) A laser-based technique for the coating of mild steel with a vitreous enamel. Surface & Coatings Technology, 140 (3). pp. 238-243. ISSN 0257-8972

mortar

British Nuclear Fuels PLC (1997) Grout or mortar removal by lasers. .

optimisation

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

ordinary Portland cement

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode laser and the effects of large beam geometry. Optics & Laser Technology, 31 (8). pp. 583-591. ISSN 0030-3992

ordinary Portland cement (OPC)

Lawrence, Jonathan and Li, Lin (2001) The effects of process gas type on the surface condition of high power diode laser treated ordinary Portland cement. Optics and Lasers in Engineering, 36 (6). pp. 599-605. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2001) The influence of a high power diode laser (HPDL) generated glaze on the wetting characteristics and the subsequent HPDL enamelling of ordinary Portland cement. Surface and Coatings Technology, 137 (1). pp. 77-85. ISSN 0257-8972

Lawrence, Jonathan and Peligrad, Alexandrou and Zhou, E. and Li, Lin and Morton, D. (2001) Prediction of melt depth in selected architectural materials during high power diode laser treatment. Optics and Lasers in Engineering, 35 (1). pp. 51-62. ISSN 0143-8166

osteoblast cells

Lawrence, Jonathan and Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

oxide

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) The effects of high power diode laser radiation on the wettability, adhesion and bonding characteristics of an alumina/silica-based oxide and vitreous enamel. Surface & Coatings Technology, 115 (2-3). pp. 273-281. ISSN 0257-8972

permeability

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

phase

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

physical

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

polar component

Lawrence, Jonathan and Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

polyethylene (PE)

Lawrence, Jonathan and Li, Lin (2001) Wettability characteristics of polyethylene (PE) modified with CO2, Nd:YAG, excimer and high power diode lasers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (12). pp. 1735-1744. ISSN 0954-4054

processing research

Lawrence, Jonathan and Low, David K. Y. (2006) Advances in laser materials processing research and applications. Trivandrum: Transworld Research Network. ISBN 8130800780

properties

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

rapid solidification

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

refractory

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

removal

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (2006) Ceramic tile grout removal & sealing using high power lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

British Nuclear Fuels PLC (1997) Grout or mortar removal by lasers. .

roughness

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

sealing

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (2006) Ceramic tile grout removal & sealing using high power lasers. In: The 15th International Congress on Applications of Lasers and Electro-Optics (ICALEO �96), 14-17 October 1996, Detroit.

sealing system

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

sheet

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

silica

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) The effects of high power diode laser radiation on the wettability, adhesion and bonding characteristics of an alumina/silica-based oxide and vitreous enamel. Surface & Coatings Technology, 115 (2-3). pp. 273-281. ISSN 0257-8972

Lawrence, Jonathan and Lubrani, Peter and Li, Lin (2001) On the selective deposition of tin and tin oxide on various glasses using a high power diode laser. Surface and Coatings Technology, 137 (2-3). pp. 235-240. ISSN 0257-8972

solidification

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

steel

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin (2001) The forming of mild steel plates with a 2.5 kW high power diode laser. International Journal of Machine Tools & Manufacture: Design, Research and Application, 41 (7). pp. 967-977. ISSN 0890-6955

stress distribution

Lim, Kok Chuan and Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2004) Finite element analysis of stress distribution and the effects of geometry in a laser-generated single-stage ceramic tile grout seal using ANSYS. Proceedings of the Institution of Mechanical Engineers Part B: Journal of the Engineering Manufacturing, 218 (10). pp. 1227-1237. ISSN 0954-4054

surface

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode laser and the effects of large beam geometry. Optics & Laser Technology, 31 (8). pp. 583-591. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of a modified mild steel with CO2, Nd:YAG, excimer and high power diode lasers. Journal of Physics D: Applied Physics, 32 (18). pp. 2311-2318. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (1999) Wettability characteristics of an Al2O3/SiO2-based ceramic modified with CO2, Nd:YAG, excimer and high-power diode lasers. Journal of Physics D: Applied Physics, 32 (10). p. 1075. ISSN 0022-3727

surface energy

Hao, Liang and Lawrence, Jonathan (2004) On the role of laser-induced microstructures in influencing the surface energy of magnesia partially stabilized zirconia bioceramic. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 218 (1). pp. 59-76. ISSN 0954-4054

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2001) Wettability characteristics of polyethylene (PE) modified with CO2, Nd:YAG, excimer and high power diode lasers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (12). pp. 1735-1744. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2001) The influence of a high power diode laser (HPDL) generated glaze on the wetting characteristics and the subsequent HPDL enamelling of ordinary Portland cement. Surface and Coatings Technology, 137 (1). pp. 77-85. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) Diode laser modification of ceramic material surface properties for improved wettability and adhesion. Applied Surface Science, 138-13 . pp. 388-393. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) High power diode laser modification of the wettability characteristics of an Al2O3/SiO2 based oxide compound for improved enamelling. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 266 (1-2). pp. 167-174. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) The effects of high power diode laser radiation on the wettability, adhesion and bonding characteristics of an alumina/silica-based oxide and vitreous enamel. Surface & Coatings Technology, 115 (2-3). pp. 273-281. ISSN 0257-8972

surface glazing

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

surface modification

Lawrence, Jonathan and Li, Lin (1999) Surface glazing of concrete using a 2.5 kW high power diode lase. In: The 18th International Congress on Applications of Lasers and Electro-Optics (ICALEO �99), 15-18 November 1999, San Diego.

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (1998) Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics. In: The 17th International Congress on Applications of Lasers and Electro-Optics (ICALEO �98), 16-19 November 1998, Orlando.

surface modi® cation

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

surface oxygen

Lawrence, Jonathan and Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

surface roughness

Lawrence, Jonathan and Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

surface treatment

Waugh, David and Lawrence, Jonathan (2012) Laser surface processing of polymers for biomedical applications. In: Laser assisted fabrication of materials. Springer Series in Materials Science . Springer-Verlag, Berlin. ISBN 9783642283581

technology

Lawrence , Jonathan and Pou, Juan and Low, David K. Y. and Toyserkani, Ehsan (2010) Advances in laser materials processing: Technology, research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746

testing

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

tin

Lawrence, Jonathan and Lubrani, Peter and Li, Lin (2001) On the selective deposition of tin and tin oxide on various glasses using a high power diode laser. Surface and Coatings Technology, 137 (2-3). pp. 235-240. ISSN 0257-8972

tin oxide

Lawrence, Jonathan and Lubrani, Peter and Li, Lin (2001) On the selective deposition of tin and tin oxide on various glasses using a high power diode laser. Surface and Coatings Technology, 137 (2-3). pp. 235-240. ISSN 0257-8972

titanium alloy

Lawrence, Jonathan and Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

vitreous enamel

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

vitrification

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) High power diode laser modification of the wettability characteristics of an Al2O3/SiO2 based oxide compound for improved enamelling. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 266 (1-2). pp. 167-174. ISSN 0921-5093

vitrify

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence , Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

wear

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

wear life

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

wear life characteristics

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

wetabillity

Lawrence, Jonathan and Hao, Liang and Chew, Hong R. (2006) On the correlation between Nd:YAG laser-induced wettability characteristics modification and osteoblast cell bioactivity on a titanium alloy. Surface & Coatings Technology, 200 (18-19). pp. 5581-5589. ISSN 0257-8972

wettability

Hao, Liang and Lawrence, Jonathan (2003) Wettability characteristics modification of a magnesia partially stabilized zirconia using laser treatment and fundamental mechanism analysis. In: Recent Research Developments in Materials Science and Engineering. Transworld Research Network / Research Signpost, India, pp. 159-184. ISBN 9788178950570

Lawrence, Jonathan and Li, Lin (2001) Laser modification of the wettability characteristics of engineering materials. Engineering Materials Series ERS Publication 3 . The Institution of Mechanical Engineers, Professional Engineering Publishing, London. ISBN 9781860582936

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2002) On the mechanisms of wetting characteristics modification for selected metallic materials by means of high power diode laser radiation. Journal of laser applications, 14 (2). pp. 107-113. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2001) Wettability characteristics of polyethylene (PE) modified with CO2, Nd:YAG, excimer and high power diode lasers. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (12). pp. 1735-1744. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2001) The characteristics of a high-power diode laser fired enamel coating on a carbon steel. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 215 (4). pp. 509-519. ISSN 0953-4054

Lawrence, Jonathan and Li, Lin (2003) The enamelling of concrete for improved performance characteristics by means of high power diode laser interaction. Journal of Materials Processing Technology, 138 (1-3). pp. 551-559. ISSN 0924-0136

Lawrence, Jonathan and Li, Lin (2001) The influence of a high power diode laser (HPDL) generated glaze on the wetting characteristics and the subsequent HPDL enamelling of ordinary Portland cement. Surface and Coatings Technology, 137 (1). pp. 77-85. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin (2001) A laser-based technique for the coating of mild steel with a vitreous enamel. Surface & Coatings Technology, 140 (3). pp. 238-243. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2001) Single-stage sealing of ceramic tiles by means of high power diode laser radiation. Journal of Laser Applications, 13 (6). pp. 222-230. ISSN 1042 -346X

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) Diode laser modification of ceramic material surface properties for improved wettability and adhesion. Applied Surface Science, 138-13 . pp. 388-393. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1999) The effects of high power diode laser radiation on the wettability, adhesion and bonding characteristics of an alumina/silica-based oxide and vitreous enamel. Surface & Coatings Technology, 115 (2-3). pp. 273-281. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part II: Mechanical, chemical and physical properties. Optics & Laser Technology, 30 (3-4). pp. 215-223. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin and Spencer, Julian T. (1998) Surface modification of an Al2O3/SiO2 based ceramic treated with CO2, Nd:YAG, excimer and high power diode lasers for altered wettability characteristics. In: The 17th International Congress on Applications of Lasers and Electro-Optics (ICALEO �98), 16-19 November 1998, Orlando.

British Nuclear Fuels PLC; J.T. Spencer; L.Li; J. Lawrence (1999) A method of improving wettability and enamelling. .

Lawrence , Jonathan and Li, Lin and Spencer, Julian (1998) A two-stage ceramic tile grout sealing process using a high power diode laser Part I: Grout development and materials characteristics. Optics & Laser Technology, 30 (3-4). pp. 205-214. ISSN 0030-3992

Waugh, David and Lawrence, Jonathan (2012) Laser surface processing of polymers for biomedical applications. In: Laser assisted fabrication of materials. Springer Series in Materials Science . Springer-Verlag, Berlin. ISBN 9783642283581

This list was generated on Thu Sep 18 22:29:31 2014 BST.