Items where Subject is "H Engineering > H600 Electronic and Electrical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
0544:Electrical engineering 0984:Computer science ABS Accuracy Active filter Active magnetic bearings Active power tracking Actuators Aerospace Amplitude distortion Applied sciences Approximated solutions Automatic controller design Automotive Automotive application Automotive applications Batteries Battery Modeling Battery charge estimation Battery management systems (BMS) Bayesian methods Bayesian networks Binary quantization Brushless AC motor Brushless drives Capacitors Charge Coupled Ciphers Clocks Closed-loop Computer science Control parametrization enhancing transform Converter control Cross-coupling Current Vector Control Cyclic analysis DC power supplies DC power supply DC-DC power convertors DSP Dead-time compensation Deep sea vehicles Device under test Digital control Distributed simulation Disturbance rejection Efficiency Electric propulsion Electric vehicles Electrical engineering Electro-chemical batteries Empirical formula Empirical formula for designing symmetric/anti-symmetric FIR single band PCLS filters Energy Storage Energy converter for HEV Energy management Energy storage Energy system management Equivalent circuits Error modeling Estimation techniques Estination technique FIR filter bank design via stretching and shifting frequency FIR single band PCLS filters Fault handling strategy Free Piston Energy converter Fuzzy Logic Fuzzy-logic control Genetic Algorithms Genetic Programming Genetic algorithm Genetic algorithms Harmonic analysis Harmonic. excitation Harmonics High frequency power converter High-power Hybrid Electric Vehicles Hybrid electric vehicle (HEV) Hybrid electric vehicles Hybrid energy source models Hybrid vehicles Hydrogen fuel cells Hysteresis Impulsive dynamical system Integrated circuit modeling Interior point methods Kalman Filter Linear approximation Linear drive Linear phase finite impulse response two-channel uniform maximally decimated modulated filter bank design Linear programming Lyapunov stability. Magnetic Analysis Magnetic Gears Magnetic forces Marne Matrix Converter Matrix converter Matrix converters Maximum absolute differences Microelectronics, Nondestructive examination Model reference control Model-reference control Modelling Modulation strategy Motor Drives Multi-chip Multilevel converter Multiobjective evolutionary algorithm Multiobjective genetic programming Multiobjective optimisation Network analysis Non destructive Non destructive testing Non-linear control Nonlinear estimation Optimal PWM control Optimal cosine modulated nonuniform linear Optimal design Optimisation PMSM Parameter Estimation Parameter specification Permanent Magnet AC Motor Permanent Magnet AC motor Permanent magnet motor Permanent magnet motors Permanent magnet synchronous motor Popov stability Power converter Power demand Power devices Power dissipation Power quality Power steering Power systems Predictive Control Probabilistic modeling Proportional control Protection circuits QCA QCA circuit design QCAPro QFT Quantum dots Quantum-dot cellular automata Rational IIR filters Real-time Simulation Relay-systems Reluctance Machines Resonant converter Resonant converters Resonant power conversion Resonant power converter Resonant-mode power supply Response Surfaces Ripple magnitude SAW feedback SAW torque transducer SAW torque transducers Self-oscillating Semi-infinite programming Semiconductor Devices Semiconductor diodes photodiode - noise spurious signal Sensorless control Servo Control Short-circuit protection Signal Injection Simulink Singular spectrum analysis Sinusoidal input current Soft switching Space vector modulation Sparse optimizations State Observer State estimation State of Charge prediction State of Health predction State variables State-variable modelling Stochastic noise sources image sensors Stress analysis Supercapacitors Switched linear system Switches Switching circuits Terms—Interpolative sigma delta modulators Three-phase system Time delay Topology Traction control Two-channel linear phase FIR QMF bank minimax design Two-degree-of-freedom Unity power factor Upper bound Variable speed drives Vector control Voltage ranges, Magnetic materials Weightless multi-criterion functional inequality constrained optimization problem ZVS converters Zebra batteries active magnetic bearings allpass complementary FIR filters anti lock braking anti-lock braking approximation theory arbitrary pixel precisions back-EMF batteries battery technology bmjfind cellular automata circuit analysis constraint transcription method coprime factorisation dc-dc converter deep sea autonomous vehicles deep sear remote vehicles deep-sea remote vehicles disturbance attenuation dual parameterization dynamical compensators electric smart car electric vehicle electric vehicles electrical drives electromagnetic device electromechanical actuation electromechanical pile-driver energy storage error analysis error power estimation extended kalman filter filled function finite element modelling flight control actuators flywheel energy storage frequency response of the prototype filter fuel cells functional inequality constraints global optimization. h-bridge converter halbach magnetization harmonic distortion hybrid global optimization method impedance matching induction heater induction heating induction motor interior permanent magnet synchronous machines interval systems kalman filter linear actuator linear actuators linear drives magnetic bearings magnetic composites magnetic gearbox matrix converter matrix energy converters matrix power converter matrix power converters minimal control minimal phase minimax nonsmooth optimization problem model transformation technique more electric aircraft motion control motion estimation with motion vectors multi axis control multi-inertial load multilevel energy converters multivariable control near allpass noise shaping non-adiabatic switching power loss non-linear observers nonconvex optimization problem nonlinear control nonlinear observers nonuniform filter banks nonuniform frequency bands optimal enhancing control technique parameter estimation permanent magnet actuators permanent magnet brushless machines permanent magnet synchronous motor permanent magnet synchronous motors pmac motor polarization error estimation power electronic drives power electronics probabilistic automata probabilistic modeling tool prototype filter quantum computing quantum dot cellular automata quantum dots real valued rational IIR filters reconfigurable control resonant converter resonant power convertors robust stabilisation robust stabilization rotor position estimation saw torque transducer semi-infinite programming sensor fusion sensorless control series parallel resonant converter servo drives servo mechanism servo motors single step optimal block sliding mode control stability state estimation state of charge state of health state of health estimation steady state analysis strictly stable surface acoustic wave devices switched-capacitor DC/DC power converters system identification torque control velocity control vibration control voltage sourced zero current switching zero voltage switching
Number of items at this level: 464.

0544:Electrical engineering

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

0984:Computer science

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

ABS

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

Accuracy

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

Active filter

Ganthony, D and Bingham, Chris (2007) Integrated series active filter for aerospace flight control surface actuation. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Sweden.

Active magnetic bearings

Wu, Z. Y. and Bingham, Chris and Howe, D. and Peel, D. (2000) QFT for the design of active magnetic bearing control systems. In: 2000 International Symposium on Magnetic Bearings, 23-25 August 2000, Martigny, Switzerland.

Active power tracking

Wu, Y. and Schofield, N. and Bingham, Chris and Howe, D. and Stone, D. A. (2001) Design of robust current tracking control for active power filters. In: Electric Machines and Drives Conference, 2001. IEMDC 2001. IEEE International , 17-20 June 2001, MIT, USA.

Actuators

Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464

Aerospace

Ganthony, D and Bingham, Chris (2007) Integrated series active filter for aerospace flight control surface actuation. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Sweden.

Amplitude distortion

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei (2008) Linear phase FIR two-channel uniform maximally decimated modulated filter bank design via a weightless multi-criterion functional inequality constrained optimization approach. In: The 2nd International Conference on Information Systems Sciences, 18-20 December 2008, Dalian, China.

Applied sciences

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

Approximated solutions

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

Automatic controller design

Stewart, Paul and Stone, D. A. and Fleming, P.A. (2006) On-line multiobjective automatic control system generation by evolutionary algorithms. In: 2004 IEEE International Symposium on Industrial Electronics, 4-7 May 2004, Palais de Congres Expositions, Ajaccio, France.

Automotive

Stewart, P. and Gladwin, D. and Stewart, J. and Cowley, R. (2008) Generator voltage stabilisation for series-hybrid electric vehicles. ISA Transactions, 47 (2). pp. 222-228. ISSN 0019-0578

Automotive application

West, M and Long, S and Wang, J and Bingham, Chris and Howe, D (2005) Emergency braking for free piston energy converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Automotive applications

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

West, M J and Bingham, Chris and Schofield , N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , Toulouse, France.

Batteries

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Battery Modeling

Gould, C. and Bingham, Chris and Stone, D. and Foster, M. (2010) State-of-Function determination for EV/HEV battery packs. In: The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov 5-9 2010, Shenzhen, China.

Battery charge estimation

Gould, C and Bingham, Chris and Stone, D A and Bentley, P (2008) Novel battery model of an all-electric personal rapid transit vehicle to determine state-of-health through subspace parameter estimation and a Kalman Estimator. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Gould, C. and Bingham, Chris and Stone, D. A. and Bentley, P. (2009) New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques. Vehicular Technology, IEEE Transactions on , 58 (8). pp. 3905-3916. ISSN 0018-9545

Wilkie, K. and Stone, D. A. and Foster, M. P. and Bingham, Chris (2007) A cascaded H-bridge BLDC drive incorporating battery management. In: 12th European Conference on Power Electronics and Applications, 2-5 September 2007, Aalborg, Denmark.

Battery management systems (BMS)

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Bayesian methods

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Bayesian networks

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

Binary quantization

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

Brushless AC motor

Bingham, Chris and Atallah, K. and Mellor, P. H. and Buckley, J. M. (1997) Reconfigurable control of brushless AC composite roller systems. In: PCIM Europe 1997, Power Conversion Intelligent Motion Conference, June 10-12 1997, Nurnberg, Germany.

Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris and Stone, D. A. (2009) Improved rotor-position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. Industry Applications, IEEE Transactions on, 45 (5). pp. 1843-1850. ISSN 0093-9994

Zhu, Z Q and Li , Y and Howe, D and Bingham, Chris and Stone, D A (2007) Influence of machine topology and cross-coupling magnetic saturation on rotor position estimation accuracy in extended back-EMF based sensorless PM brushless AC drives. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. Conference Record of the 2007 IEEE, 23-27 Sept 2007, New Orleans, USA.

Brushless drives

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

Jakeman, N and Bullough, W and Bingham, Chris and Mellor, Phillip (2003) A novel linear direct drive system for textile winding applications. In: European Power Electronics and Drives conference EPE 2003, 2-4 September 2003, Toulouse, France.

Capacitors

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

Charge Coupled

Allinson, Nigel (1987) Noise effects in solid-state imagers. In: Colloquium on Noise in Images, 29 January 1987, London.

Ciphers

Liu, Weiqiang and Srivastava, Saket and Lu, Liang and O'Neill, Maire and Swartzlander, Earl E. (2013) Power analysis attack of QCA circuits: a case study of the Serpent cipher. In: Circuits and Systems (ISCAS), 2013 IEEE International Symposium on, 19-23 May 2013, Beijing, China.

Clocks

Liu, Weiqiang and Srivastava, Saket and Lu, Liang and O'Neill, Maire and Swartzlander, Earl E. (2013) Power analysis attack of QCA circuits: a case study of the Serpent cipher. In: Circuits and Systems (ISCAS), 2013 IEEE International Symposium on, 19-23 May 2013, Beijing, China.

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Closed-loop

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Computer science

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

Control parametrization enhancing transform

Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098

Converter control

Ang, Y A and Bingham, Chris and Stone, D A and Foster, M (2005) Digital control of dual-load LCLC resonant converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Foster, M P and Bingham, Chris and Stone, D A and Sewell, H I (2003) Observer based feedback control of 3rd order LCC resonant converters. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

Gilbert, A .J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Cross-coupling

Zhu, Z Q and Li , Y and Howe, D and Bingham, Chris and Stone, D A (2007) Influence of machine topology and cross-coupling magnetic saturation on rotor position estimation accuracy in extended back-EMF based sensorless PM brushless AC drives. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. Conference Record of the 2007 IEEE, 23-27 Sept 2007, New Orleans, USA.

Current Vector Control

Stewart, Paul and Kadirkamanathan, Visakan (2000) Dynamic model reference control of a PMAC motor for automotive traction drives. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

Cyclic analysis

Gould, C and Bingham, Chris and Stone, D A and Foster, M P (2004) Rapid steady-state analysis of CLL resonant power converters. In: IASTED International Conference on Circuits, Signals, and Systems - 2004, Nov 28 - Dec 01 2004, Clearwater Beach, Florida USA.

DC power supplies

West, M J and Bingham, Chris and Schofield , N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , Toulouse, France.

DC power supply

Gilbert, A .J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Gilbert, A. J. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Williams, D. R. and Bingham, Chris and Stone, D. A. and Foster , M. P. and Gilbert, A. (2007) Analysis of self-oscillating DC-DC resonant power converters using a hysteretic relay. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

DC-DC power convertors

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

DSP

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Peel, D. (1996) DSP based non-linear control of an electrically actuated vibratory pile-driver. In: Symposium on Industrial Drives, Power Quality, Traction Systems, 5-7 June 1996, Italy.

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Peel, D. (1996) Non-linear control of an electromagnetic vibratory pile-driver with DSP based implementation. In: 1996 ICEM International Conference on Electrical Machines, Sept 10-12 1996, Spain.

Wu, Y. and Schofield, N. and Bingham, Chris and Howe, D. and Stone, D. A. (2001) Design of robust current tracking control for active power filters. In: Electric Machines and Drives Conference, 2001. IEMDC 2001. IEEE International , 17-20 June 2001, MIT, USA.

Dead-time compensation

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on , 57 (8). pp. 2651-2658. ISSN 0278-0046

Deep sea vehicles

Bhangu, B S and Snary, P and Bingham, Chris and Stone, D A (2005) Sensorless control of deep-sea ROVs PMSMs excited by matrix converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Device under test

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Digital control

Sewell, H. I. and Stone, D. A. and Bingham, Chris (2001) Digital control improves three-phase induction heater performance. In: PCIM 2001 Power Conversion and Intelligent Motion Conference, 19-21 June 2001, Nurnberg, Germany.

Distributed simulation

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A. (2002) On the response surface methodology and designed experiments for computationally intensive distributed aerospace simulations. In: 2002 Winter Simulation conference, 8-11 December 2002, Hyatt Regency Hotel, San Diego, California, USA.

Disturbance rejection

O'Sullivan, T M and Schofield, N and Bingham, C M (2004) SAW torque transducers for disturbance rejection and tracking control of multi-inertia servo-drive systems. In: Power Electronics Specialists Conference, 2004. PESC 04. 2004 IEEE 35th Annual , 20-25 June 2004, Aachen, Germany.

Efficiency

West, M J and Bingham, Chris and Schofield , N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , Toulouse, France.

Electric propulsion

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Electric vehicles

Howe, D. and Schofield, N. and Bingham, Chris (2002) Energy optimised traction system for all-electric vehicles. IEE Power Engineering Journal, 16 (1). pp. 29-32. ISSN 1479-8344

Khatun, P. and Bingham, Chris and Mellor, P. H. (2001) Comparison of control methods for electric vehicle antilock braking / traction control systems. SAE Technical Paper Series, SP-1576 (2001-01-0596). ISSN 0148-7191

Khatun, P. and Bingham, Chris and Schofield , N. and Mellor, P. H. (1999) Anti-lock braking/traction control for a high-performance all-electric racing vehicle. In: PCIM Europe 1999, Power Conversion Intelligent Motion Conference, 22-24 June 1999, Nurnberg, Germany.

Schofield, N. and Yap, H. T. and Bingham, Chris (2006) A hydrogen fuel cell - high energy dense battery hybrid energy/power source for an urban electric vehicle. International Journal of Electrical Engineering and Transportation, 2 (2). pp. 25-31. ISSN 1773-9357

West, M J and Bingham, Chris and Schofield , N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , Toulouse, France.

Electrical engineering

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

Electro-chemical batteries

Schofield, N and Yap, H T and Bingham, Chris (2005) Hybrid energy sources for electric and fuel cell vehicle propulsion. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Empirical formula

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Kok, Chi-Wah and Siu, Wan-Chi (2008) Empirical formula for designing symmetric/anti-symmetric FIR single band PCLS filters. In: 16th European Conference on Signal Processing , 25-29 August 2008, Lausanne, Switzerland.

Empirical formula for designing symmetric/anti-symmetric FIR single band PCLS filters

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Kok, Chi-Wah and Siu, Wan-Chi (2008) Empirical formula for designing symmetric/anti-symmetric FIR single band PCLS filters. In: 16th European Conference on Signal Processing , 25-29 August 2008, Lausanne, Switzerland.

Energy Storage

Gould, C. and Bingham, Chris and Stone, D. and Foster, M. (2010) State-of-Function determination for EV/HEV battery packs. In: The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov 5-9 2010, Shenzhen, China.

West, M J and Bingham, Chris and Schofield , N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , Toulouse, France.

Energy converter for HEV

West, M and Long, S and Wang, J and Bingham, Chris and Howe, D (2005) Emergency braking for free piston energy converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Energy management

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Energy storage

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Energy system management

West, M J and Bingham, Chris and Schofield , N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , Toulouse, France.

Equivalent circuits

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Error modeling

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

Estimation techniques

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

Estination technique

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

FIR filter bank design via stretching and shifting frequency

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Optimal cosine modulated nonuniform linear phase FIR filter bank design via stretching and shifting frequency response of prototype filter. In: 7th IEEE, IET International Symposium on Communication Systems, Networks, and Digital Signal Processing, 21 - 23 July 2010, Northumbria University, Newcastle upon Tyne.

FIR single band PCLS filters

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Kok, Chi-Wah and Siu, Wan-Chi (2008) Empirical formula for designing symmetric/anti-symmetric FIR single band PCLS filters. In: 16th European Conference on Signal Processing , 25-29 August 2008, Lausanne, Switzerland.

Fault handling strategy

West, M and Long, S and Wang, J and Bingham, Chris and Howe, D (2005) Emergency braking for free piston energy converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Free Piston Energy converter

West, M and Long, S and Wang, J and Bingham, Chris and Howe, D (2005) Emergency braking for free piston energy converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Fuzzy Logic

Khatun, P and Bingham, Chris and Schofield, N and Mellor, P H (2003) Application of Fuzzy control algorithms for electric vehicle antilock braking/traction control systems. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 52 (5). pp. 1356-1364. ISSN 0018-9545

Fuzzy-logic control

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

Genetic Algorithms

Stewart, Paul (2008) Search methodologies in automotive control applications. In: IMechE Symposium on Control and Modelling in Automotive Systems, UKACC Control 2008 conference, 3rd September 2008, Manchester/Salford Universities.

Wilkie, K. D. and Foster, M. P. and Stone, D. A. and Bingham, C. M. (2008) Hardware-in-the-loop tuning of a feedback controller for a buck converter using a GA. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Genetic Programming

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A novel genetic programming approach to the design of engine control systems for the voltage stabilisation of hybrid electric vehicle generator outputs. Proceedings of the Institute of Mechanical Engineers Part D - Journal of Automobile Engineering., 225 (10). pp. 1334-1346. ISSN 0954-4070

Genetic algorithm

Foster, M. P. and Gilbert, A. G. and Gould, C. R. and Stone, D. A. and Bingham, Chris (2007) Automated design of LCC resonant converters using a genetic algorithm employing a describing function equivalent circuit converter model. ISAST Transactions on Electronics and Signal Processing, 1 (1). pp. 33-37. ISSN 1797-2329

Genetic algorithms

Banghu, B S and Bingham, C M (2005) GA-tuning of nonlinear observers for sensorless control of automotive power steering IPMSMs. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Harmonic analysis

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

Harmonic. excitation

Gould, C and Stone, D A and Foster, M P and Bingham, C (2004) State-variable modelling of CLL resonant converters. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

Harmonics

Ganthony, D and Bingham, Chris (2007) Integrated series active filter for aerospace flight control surface actuation. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Sweden.

High frequency power converter

Gilbert, A .J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.

Nguyen-Quang, N. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Comparison of single-phase matrix converter and H-bridge converter for radio frequency induction heating. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

High-power

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Hybrid Electric Vehicles

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Schofield, N. and Yap , H. T. and Bingham, Chris (2004) A hydrogen fuel cell vs energy dense battery hybrid energy/power source for an urban electric vehicle. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

Walsh, C and Bingham, Chris (2009) Electric drive vehicle deployment in the UK. In: EVS24 International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, May 2009, Stavanger, Norway.

Wilkie, K. and Stone, D. A. and Foster, M. P. and Bingham, Chris (2007) A cascaded H-bridge BLDC drive incorporating battery management. In: 12th European Conference on Power Electronics and Applications, 2-5 September 2007, Aalborg, Denmark.

Wu, Y. and Bingham, Chris and Peel, D. and Howe, D. (2001) Active magnetic bearings for a flywheel peak power buffer for electric vehicles. International Journal of Applied Electromagnetics and Mechanics, 15 (1). pp. 201-206. ISSN 1383-5416

Hybrid electric vehicle (HEV)

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A novel genetic programming approach to the design of engine control systems for the voltage stabilisation of hybrid electric vehicle generator outputs. Proceedings of the Institute of Mechanical Engineers Part D - Journal of Automobile Engineering., 225 (10). pp. 1334-1346. ISSN 0954-4070

Hybrid electric vehicles

Stewart, Paul (2009) Electrical storm: novel hybrid electric vehicle R&D. In: Integrating Technologies for Low Carbon Vehicles, 29 September 2009, Lotus Engineering Centre, Hethel, UK.

Hybrid energy source models

Schofield, N and Yap, H T and Bingham, Chris (2005) Hybrid energy sources for electric and fuel cell vehicle propulsion. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Hybrid vehicles

Stewart, P. and Gladwin, D. and Stewart, J. and Cowley, R. (2008) Generator voltage stabilisation for series-hybrid electric vehicles. ISA Transactions, 47 (2). pp. 222-228. ISSN 0019-0578

Hydrogen fuel cells

Schofield, N and Yap, H T and Bingham, Chris (2005) Hybrid energy sources for electric and fuel cell vehicle propulsion. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Schofield, N. and Yap, H. T. and Bingham, Chris (2006) A hydrogen fuel cell - high energy dense battery hybrid energy/power source for an urban electric vehicle. International Journal of Electrical Engineering and Transportation, 2 (2). pp. 25-31. ISSN 1773-9357

Schofield, N. and Yap , H. T. and Bingham, Chris (2004) A hydrogen fuel cell vs energy dense battery hybrid energy/power source for an urban electric vehicle. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

Hysteresis

Williams, D and Bingham, Chris and Foster, M P and Stone, D A (2008) Self-oscillating control of a DC-DC resonant converter using a hysteretic relay. ISAST Transactions on Electronics and Signal Processing, 2 (3). pp. 70-75. ISSN 1797-2329

Impulsive dynamical system

Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098

Integrated circuit modeling

Liu, Weiqiang and Srivastava, Saket and Lu, Liang and O'Neill, Maire and Swartzlander, Earl E. (2013) Power analysis attack of QCA circuits: a case study of the Serpent cipher. In: Circuits and Systems (ISCAS), 2013 IEEE International Symposium on, 19-23 May 2013, Beijing, China.

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Interior point methods

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

Kalman Filter

Gilbert, A. and Bingham, Chris and Bhangu, B. S. and Foster, M. P. and Stone, D. A. (2005) EKF-based output-voltage regulation of 3rd-order LCC resonant converters subject to load variations. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Gould, C and Bingham, Chris and Stone, D A and Bentley, P (2008) Novel battery model of an all-electric personal rapid transit vehicle to determine state-of-health through subspace parameter estimation and a Kalman Estimator. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Linear approximation

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

Linear drive

West, M and Long, S and Wang, J and Bingham, Chris and Howe, D (2005) Emergency braking for free piston energy converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Linear phase finite impulse response two-channel uniform maximally decimated modulated filter bank design

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei (2008) Linear phase FIR two-channel uniform maximally decimated modulated filter bank design via a weightless multi-criterion functional inequality constrained optimization approach. In: The 2nd International Conference on Information Systems Sciences, 18-20 December 2008, Dalian, China.

Linear programming

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

Lyapunov stability.

Liu, Kan and Zhang, Q. and Zhu, Z. Q. and Zhang, J. and Shen, A. W. and Stewart, Paul (2010) Comparison of two novel MRAS strategies for identifying parameters in permanent magnet synchronous motors. International Journal of Automation and Computing, 7 (4). pp. 516-524. ISSN 1476-8186

Magnetic Analysis

Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464

Magnetic Gears

Montague, R. and Bingham, Chris and Atallah, K. (2011) Servo control of magnetic gears. IEEE Transactions on Mechatronics, 99 (2). pp. 1-10. ISSN 1083-4435

Magnetic forces

Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464

Marne

Bhangu, B S and Snary, P and Bingham, Chris and Stone, D A (2005) Sensorless control of deep-sea ROVs PMSMs excited by matrix converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Matrix Converter

Bhangu, B S and Snary, P and Bingham, Chris and Stone, D A (2005) Sensorless control of deep-sea ROVs PMSMs excited by matrix converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Matrix converter

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, M P (2006) Single phase matrix converter for radio frequency induction heating. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Matrix converters

Snary, P and Bingham, Chris and Stone, D A and Schofield, N (2003) Drive systems for operation on deep-sea ROVs. In: 10th European conference on Power Electronics and Applications, 2-4 September 2003, Toulouse, France.

Maximum absolute differences

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

Microelectronics, Nondestructive examination

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Model reference control

Stewart, Paul and Kadirkamanathan, Visakan (2000) Dynamic model reference control of a PMAC motor for automotive traction drives. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

Model-reference control

Stewart, P. and Gladwin, D. and Stewart, J. and Cowley, R. (2008) Generator voltage stabilisation for series-hybrid electric vehicles. ISA Transactions, 47 (2). pp. 222-228. ISSN 0019-0578

Modelling

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Modulation strategy

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.

Motor Drives

Wilkie, K. and Stone, D. and Bingham, C. and Foster, M. (2008) Integrated multilevel converter and battery management. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Multi-chip

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Multilevel converter

Wilkie, K. and Stone, D. and Bingham, C. and Foster, M. (2008) Integrated multilevel converter and battery management. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Multiobjective evolutionary algorithm

Stewart, Paul and Stone, D. A. and Fleming, P.A. (2006) On-line multiobjective automatic control system generation by evolutionary algorithms. In: 2004 IEEE International Symposium on Industrial Electronics, 4-7 May 2004, Palais de Congres Expositions, Ajaccio, France.

Multiobjective genetic programming

Stewart, Paul and Stone, D. A. and Fleming, P.A. (2006) On-line multiobjective automatic control system generation by evolutionary algorithms. In: 2004 IEEE International Symposium on Industrial Electronics, 4-7 May 2004, Palais de Congres Expositions, Ajaccio, France.

Multiobjective optimisation

Stewart, Paul and Stone, D. A. and Fleming, P.A. (2006) On-line multiobjective automatic control system generation by evolutionary algorithms. In: 2004 IEEE International Symposium on Industrial Electronics, 4-7 May 2004, Palais de Congres Expositions, Ajaccio, France.

Network analysis

Gould, C and Stone, D A and Foster, M P and Bingham, C (2004) State-variable modelling of CLL resonant converters. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

Non destructive

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Non destructive testing

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Non-linear control

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Howe, D. and Peel , D. (1996) Experimental non-linear control of an electromagnetic vibratory pile-driver with DSP based implementation. In: EPE Chapter Symposium on Electric Drive Design and Applications, June 1996, Nancy, France.

Nonlinear estimation

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Optimal PWM control

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2008) Optimal PWM control of switched-capacitor DC/DC power converters via model transformation and enhancing control techniques. IEEE Transactions on Circuits and Systems I: Regular Papers, 55 (5). 1382 -1391. ISSN 1549-8328

Optimal cosine modulated nonuniform linear

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Optimal cosine modulated nonuniform linear phase FIR filter bank design via stretching and shifting frequency response of prototype filter. In: 7th IEEE, IET International Symposium on Communication Systems, Networks, and Digital Signal Processing, 21 - 23 July 2010, Northumbria University, Newcastle upon Tyne.

Optimal design

Foster, M. P. and Gilbert, A. G. and Gould, C. R. and Stone, D. A. and Bingham, Chris (2007) Automated design of LCC resonant converters using a genetic algorithm employing a describing function equivalent circuit converter model. ISAST Transactions on Electronics and Signal Processing, 1 (1). pp. 33-37. ISSN 1797-2329

Optimisation

Howe, D. and Schofield, N. and Bingham, Chris (2002) Energy optimised traction system for all-electric vehicles. IEE Power Engineering Journal, 16 (1). pp. 29-32. ISSN 1479-8344

PMSM

Bhangu, B. and Bingham, Chris and Coles, J. and Williams, C. (2002) EKFs and other nonlinear state estimation techniques for sensorless control of automotive PMSMs. In: Speedam Conference 2002, 11-14 June 2002, Ravello, Italy.

Parameter Estimation

Gould, C. and Bingham, Chris and Stone, D. and Foster, M. (2010) State-of-Function determination for EV/HEV battery packs. In: The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov 5-9 2010, Shenzhen, China.

Parameter specification

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

Permanent Magnet AC Motor

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris (2007) Improved rotor position estimation in extended back-EMF based sensorless PM brushless AC drives with magnetic saliency. In: Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International , 3-5 May 2007, Antalya, Turkey.

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris and Stone, D (2007) Improved rotor position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. , 23-27 Sept 2007, New Orleans, USA.

Li, Y. and Zhu, Z .Q. and Bingham, Chris and Howe, D. (2007) Improved signal injection based sensorless technique for PM brushless AC drives. In: 2007 IEEE International Conference on Networking, Sensing and Control, 15-17 April 2007, London, UK.

Stewart, Paul and Kadirkamanathan, Visakan (2000) Dynamic model reference control of a PMAC motor for automotive traction drives. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

Wilkie, K. and Stone, D. A. and Foster, M. P. and Bingham, Chris (2007) A cascaded H-bridge BLDC drive incorporating battery management. In: 12th European Conference on Power Electronics and Applications, 2-5 September 2007, Aalborg, Denmark.

Zhu, Z Q and Li, Y and Howe, D and Bingham, Chris (2007) Compensation for rotor position estimation error due to cross-coupling magnetic saturation in signal injection based sensorless control of PM brushless AC motors. In: Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International , 3-5 May 2007, Antalya, Turkey.

Zhu, Z Q and Li , Y and Howe, D and Bingham, Chris and Stone, D A (2007) Influence of machine topology and cross-coupling magnetic saturation on rotor position estimation accuracy in extended back-EMF based sensorless PM brushless AC drives. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. Conference Record of the 2007 IEEE, 23-27 Sept 2007, New Orleans, USA.

Permanent Magnet AC motor

Atallah, K. and Caparrelli, F. and Bingham, Chris and Schofield, N. and Howe, D. and Mellor, P. H. and Maxwell, C. and Moorhouse, D. and Whitley, C. (1999) Permanent magnet brushless drives for aircraft flight control surface actuation. In: Electrical Machines and Systems for the More Electric Aircraft (Ref. No. 1999/180), IEE Colloquium on , London, England.

Permanent magnet motor

Bhangu, B S and Snary, P and Bingham, Chris and Stone, D A (2005) Sensorless control of deep-sea ROVs PMSMs excited by matrix converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

West, M and Long, S and Wang, J and Bingham, Chris and Howe, D (2005) Emergency braking for free piston energy converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Permanent magnet motors

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

Jakeman, N and Bullough, W and Bingham, Chris and Mellor, Phillip (2003) A novel linear direct drive system for textile winding applications. In: European Power Electronics and Drives conference EPE 2003, 2-4 September 2003, Toulouse, France.

Permanent magnet synchronous motor

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on , 57 (8). pp. 2651-2658. ISSN 0278-0046

Popov stability

Liu, Kan and Zhang, Q. and Zhu, Z. Q. and Zhang, J. and Shen, A. W. and Stewart, Paul (2010) Comparison of two novel MRAS strategies for identifying parameters in permanent magnet synchronous motors. International Journal of Automation and Computing, 7 (4). pp. 516-524. ISSN 1476-8186

Power converter

Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098

Power demand

Liu, Weiqiang and Srivastava, Saket and Lu, Liang and O'Neill, Maire and Swartzlander, Earl E. (2013) Power analysis attack of QCA circuits: a case study of the Serpent cipher. In: Circuits and Systems (ISCAS), 2013 IEEE International Symposium on, 19-23 May 2013, Beijing, China.

Power devices

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Power dissipation

Liu, Weiqiang and Srivastava, Saket and Lu, Liang and O'Neill, Maire and Swartzlander, Earl E. (2013) Power analysis attack of QCA circuits: a case study of the Serpent cipher. In: Circuits and Systems (ISCAS), 2013 IEEE International Symposium on, 19-23 May 2013, Beijing, China.

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

Power quality

Ganthony, D and Bingham, Chris (2007) Integrated series active filter for aerospace flight control surface actuation. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Sweden.

Power steering

Banghu, B S and Bingham, C M (2005) GA-tuning of nonlinear observers for sensorless control of automotive power steering IPMSMs. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Power systems

Howe, D. and Schofield, N. and Bingham, Chris (2002) Energy optimised traction system for all-electric vehicles. IEE Power Engineering Journal, 16 (1). pp. 29-32. ISSN 1479-8344

Predictive Control

West, M J and Bingham, Chris and Schofield , N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , Toulouse, France.

Probabilistic modeling

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

Proportional control

Wilkie, K. D. and Foster, M. P. and Stone, D. A. and Bingham, C. M. (2008) Hardware-in-the-loop tuning of a feedback controller for a buck converter using a GA. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Protection circuits

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

QCA

Liu, Weiqiang and Srivastava, Saket and Lu, Liang and O'Neill, Maire and Swartzlander, Earl E. (2013) Power analysis attack of QCA circuits: a case study of the Serpent cipher. In: Circuits and Systems (ISCAS), 2013 IEEE International Symposium on, 19-23 May 2013, Beijing, China.

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

QCA circuit design

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

QCAPro

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

QFT

Wu, Y. and Schofield, N. and Bingham, Chris and Howe, D. and Stone, D. A. (2001) Design of robust current tracking control for active power filters. In: Electric Machines and Drives Conference, 2001. IEMDC 2001. IEEE International , 17-20 June 2001, MIT, USA.

Quantum dots

Liu, Weiqiang and Srivastava, Saket and Lu, Liang and O'Neill, Maire and Swartzlander, Earl E. (2013) Power analysis attack of QCA circuits: a case study of the Serpent cipher. In: Circuits and Systems (ISCAS), 2013 IEEE International Symposium on, 19-23 May 2013, Beijing, China.

Quantum-dot cellular automata

Srivastava, Saket (2007) Probabilistic modeling of quantum-dot cellular automata. PhD thesis, University of South Florida.

Rational IIR filters

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2006) Optimal design of magnitude responses of rational infinite impulse response filters. IEEE Transactions on Signal Processing , 54 (10). pp. 4039-4046. ISSN 1053-587x

Real-time Simulation

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A. (2002) On the response surface methodology and designed experiments for computationally intensive distributed aerospace simulations. In: 2002 Winter Simulation conference, 8-11 December 2002, Hyatt Regency Hotel, San Diego, California, USA.

Relay-systems

Williams, D and Bingham, Chris and Foster, M P and Stone, D A (2008) Self-oscillating control of a DC-DC resonant converter using a hysteretic relay. ISAST Transactions on Electronics and Signal Processing, 2 (3). pp. 70-75. ISSN 1797-2329

Reluctance Machines

Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464

Resonant converter

Foster, M P and Sewell, H I and Bingham, Chris and Stone, D and Howe, D (2006) Methodologies for the design of LCC voltage-output resonant converters. IEE Proceedings on Electrical Power Applications, 153 (4). pp. 559-567. ISSN 1751-8660

Gilbert, A .J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Gilbert, A. J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Normalized analysis and design of LCC resonant converters. IEEE Transactions on Power Electronics, 22 (6). pp. 2386-2402. ISSN 0885-8993

Gilbert, A. J. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.

Williams, D and Bingham, Chris and Foster, M P and Stone, D A (2008) Self-oscillating control of a DC-DC resonant converter using a hysteretic relay. ISAST Transactions on Electronics and Signal Processing, 2 (3). pp. 70-75. ISSN 1797-2329

Resonant converters

Ang, Y. and Foster, M. P. and Sewell, H. I. and Bingham, Chris and Stone, D. A. (2002) Stress analysis of fourth-order LLCC resonant converters. IEE Electronics Letters , 38 (24). pp. 1585-1586. ISSN 0013-5194

Foster, M. P. and Gilbert, A. G. and Gould, C. R. and Stone, D. A. and Bingham, Chris (2007) Automated design of LCC resonant converters using a genetic algorithm employing a describing function equivalent circuit converter model. ISAST Transactions on Electronics and Signal Processing, 1 (1). pp. 33-37. ISSN 1797-2329

Gould, C and Stone, D A and Foster, M P and Bingham, C (2004) State-variable modelling of CLL resonant converters. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

Resonant power conversion

Ang, Y and Bingham, Chris and Foster, M P and Stone, D A (2007) Analysis and control of dual-output LCLC resonant converters, and the impact of leakage inductance. In: Power Electronics and Drive Systems, 2007. PEDS '07. 7th International Conference on , 27-30 Nov 2007, Bangkok, Thailand.

Ang, Y and Bingham, Chris and Foster, M P and Stone, D A (2007) Modelling and regulation of dual-output LCLC resonant converters. In: Industrial Electronics Society, 2007. IECON 2007. 33rd Annual Conference of the IEEE , 5-8 Nov 2007, Taipei, Taiwan.

Ang, Y and Foster, M P and Bingham, Chris and Stone, D A and Sewell, H I and Howe, D (2004) Analysis of 4th-order LCLC resonant power converters. Institute of Electrical Engineering Journal of Electric Power Applications, 151 (2). pp. 169-181. ISSN 0013-5194

Ang, Y A and Bingham, Chris and Stone, D A and Foster, M (2005) Digital control of dual-load LCLC resonant converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Ang, Y A and Stone, D A and Bingham, Chris and Foster, M (2007) Rapid analysis & design methodologies of High-Frequency LCLC Resonant Inverter as Electrodeless Fluorescent Lamp Ballast. In: Power Electronics and Drive Systems, 2007. PEDS '07. 7th International Conference on , 27-30 Nov 2007, Bangkok, Thailand.

Foster, M. P. and Gould, C. and Gilbert, A. J. and Stone, D. A. and Bingham, Chris (2008) Analysis of CLL voltage-output resonant converters using describing functions. IEEE Transactions on Power Electronics, 23 (4). pp. 1772-1781. ISSN 0885-8993

Foster, M. P. and Gould, C. R. and Stone , D. A. and Bingham, Chris (2006) A novel AC equivalent circuit for the CLL voltage-output resonant converter using describing functions. In: 2006 International Conference on Electrical Machines and Systems (ICEMS), 20-23 Nov 2006, Nagasaki, Japan.

Foster, M. P. and Sewell, H. I. and Stone, D. A. and Bingham, Chris (2001) Review of modelling methodologies to facilitate rapid simulation of high-order resonant converters. In: EPE2001 European Power Electronics conference, 2001, Graz, Austria.

Foster, M. P. and Stone, D. A. and Bingham, Chris (2009) Automated design of LLC resonant converters using a genetic algorithm. In: PCIM 2009, May 2009, Nurnberg, Germany.

Gilbert, A. J. and Bingham, Chris and Bhangu, B. and Foster, M. P. (2004) EKF based feedback control of 3rd order LCC resonant converters with significant load variations. In: EPE-PEMC 2004 - International Power Electronics and Motion Control Conference 2004, 2004, Riga, Latvia.

Gilbert, A .J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Gilbert, A. J. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Gilbert , A J and Stone, D A and Bingham, Chris (2005) Rapid design of LCC current-output resonant converters with reduced electrical stresses. Institute of Electrical Engineers: Journal of Electronics Letters, 41 (6). pp. 365-366. ISSN 0013-5194

Gould, C. and Foster, M. P. and Bingham, Chris and Stone, D. A. (2006) Bandwidth controlled steady-state design and analysis of a 3kW CLL resonant converter with rectified mains output characteristics. In: 006 International Conference on Electrical Machines and Systems (ICEMS), 20-23 Nov 2006, Nagasaki, Japan.

Gould, C and Bingham, Chris and Foster, M P and Stone , D A (2005) CLL resonant converters with output short-circuit protection. Institute of Electrical Engineers Electric Power Applications, 152 (5). pp. 1296-1306. ISSN 0885-8993

Gould, C and Bingham, Chris and Stone, D A and Foster, M P (2004) Rapid steady-state analysis of CLL resonant power converters. In: IASTED International Conference on Circuits, Signals, and Systems - 2004, Nov 28 - Dec 01 2004, Clearwater Beach, Florida USA.

Gould, C and Stone, D A and Foster, M P and Bingham, C (2004) State-variable modelling of CLL resonant converters. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

Resonant power converter

Foster, M. P. and Sewell, H. I. and Bingham, Chris and Stone, D. A. and Hente, D. (2003) High-speed analysis of resonant power converters. Electric Power Applications, IEE Proceedings - , 150 (1). pp. 62-70. ISSN 1350-2352

Sewell, H I and Foster, M P and Bingham, Chris and Stone, D A and Hente, D and Howe, D (2003) Analysis of voltage output LCC resonant converters, including boost mode operation. IET Electric Power Applications, 150 (6). pp. 673-679. ISSN 1751-8660

Williams, D. R. and Bingham, Chris and Stone, D. A. and Foster , M. P. and Gilbert, A. (2007) Analysis of self-oscillating DC-DC resonant power converters using a hysteretic relay. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Resonant-mode power supply

Ang, Y A and Bingham, Chris and Stone, D A and Foster, M (2005) Digital control of dual-load LCLC resonant converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Gilbert, A. and Bingham, Chris and Bhangu, B. S. and Foster, M. P. and Stone, D. A. (2005) EKF-based output-voltage regulation of 3rd-order LCC resonant converters subject to load variations. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Response Surfaces

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A. (2002) On the response surface methodology and designed experiments for computationally intensive distributed aerospace simulations. In: 2002 Winter Simulation conference, 8-11 December 2002, Hyatt Regency Hotel, San Diego, California, USA.

Ripple magnitude

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei (2008) Linear phase FIR two-channel uniform maximally decimated modulated filter bank design via a weightless multi-criterion functional inequality constrained optimization approach. In: The 2nd International Conference on Information Systems Sciences, 18-20 December 2008, Dalian, China.

SAW feedback

Schofield, N. and O'Sullivan, T. and Bingham, Chris (2004) Improved performance of industrial servo-drive systems by saw shaft torque feedback. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

SAW torque transducer

O'Sullivan, T M and Bingham, Chris and Schofield, N (2005) Observer based tuning techniques and integrated SAW torque transducers for two-inertia servo-drive systems. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

SAW torque transducers

O'Sullivan, T M and Schofield, N and Bingham, C M (2004) SAW torque transducers for disturbance rejection and tracking control of multi-inertia servo-drive systems. In: Power Electronics Specialists Conference, 2004. PESC 04. 2004 IEEE 35th Annual , 20-25 June 2004, Aachen, Germany.

Self-oscillating

Williams, D and Bingham, Chris and Foster, M P and Stone, D A (2008) Self-oscillating control of a DC-DC resonant converter using a hysteretic relay. ISAST Transactions on Electronics and Signal Processing, 2 (3). pp. 70-75. ISSN 1797-2329

Semi-infinite programming

Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098

Semiconductor Devices

Allinson, Nigel (1987) Noise effects in solid-state imagers. In: Colloquium on Noise in Images, 29 January 1987, London.

Semiconductor diodes photodiode - noise spurious signal

Allinson, Nigel (1987) Noise effects in solid-state imagers. In: Colloquium on Noise in Images, 29 January 1987, London.

Sensorless control

Banghu, B S and Bingham, C M (2005) GA-tuning of nonlinear observers for sensorless control of automotive power steering IPMSMs. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Bhangu, B S and Bingham, Chris (2004) GA-based tuning of nonlinear observers for sensorless control of IPMSMs. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

Bhangu, B S and Snary, P and Bingham, Chris and Stone, D A (2005) Sensorless control of deep-sea ROVs PMSMs excited by matrix converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris (2007) Modelling of cross-coupling magnetic saturation in signal injection based sensorless control of permanent magnet AC motors. In: IEEE MMM/Intermag Conference 2007, 6-8 June 2007, Baltimore, USA.

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris (2007) Improved rotor position estimation in extended back-EMF based sensorless PM brushless AC drives with magnetic saliency. In: Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International , 3-5 May 2007, Antalya, Turkey.

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris and Stone, D (2007) Improved rotor position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. , 23-27 Sept 2007, New Orleans, USA.

Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris and Stone, D. A. (2009) Improved rotor-position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. Industry Applications, IEEE Transactions on, 45 (5). pp. 1843-1850. ISSN 0093-9994

O'Sullivan, T M and Bingham, Chris and Schofield, N (2005) Observer based tuning techniques and integrated SAW torque transducers for two-inertia servo-drive systems. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Zhu, Z Q and Li , Y and Howe, D and Bingham, Chris and Stone, D A (2007) Influence of machine topology and cross-coupling magnetic saturation on rotor position estimation accuracy in extended back-EMF based sensorless PM brushless AC drives. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. Conference Record of the 2007 IEEE, 23-27 Sept 2007, New Orleans, USA.

Servo Control

Montague, R. and Bingham, Chris and Atallah, K. (2011) Servo control of magnetic gears. IEEE Transactions on Mechatronics, 99 (2). pp. 1-10. ISSN 1083-4435

Short-circuit protection

Gould, C and Stone, D A and Foster, M P and Bingham, C (2004) State-variable modelling of CLL resonant converters. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

Signal Injection

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris and Stone, D (2007) Improved rotor position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. , 23-27 Sept 2007, New Orleans, USA.

Simulink

Sewell, H. I. and Stone, D. A. and Bingham, C. M. (1999) Simulink based macro-model of a voltage-source induction heater. In: PCIM Europe 1999, Power Conversion Intelligent Motion Conference, 22-24 June 1999, Nurnberg, Germany.

Singular spectrum analysis

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

Sinusoidal input current

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, M P (2006) Single phase matrix converter for radio frequency induction heating. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Soft switching

Gilbert, A. J. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, M P (2006) Single phase matrix converter for radio frequency induction heating. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Space vector modulation

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on , 57 (8). pp. 2651-2658. ISSN 0278-0046

Sparse optimizations

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

State Observer

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

O'Sullivan, T M and Bingham, Chris and Schofield, N (2005) Observer based tuning techniques and integrated SAW torque transducers for two-inertia servo-drive systems. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

State estimation

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Bhangu, B. and Bingham, Chris and Coles, J. and Williams, C. (2002) EKFs and other nonlinear state estimation techniques for sensorless control of automotive PMSMs. In: Speedam Conference 2002, 11-14 June 2002, Ravello, Italy.

Foster, M P and Bingham, Chris and Stone, D A and Sewell, H I (2003) Observer based feedback control of 3rd order LCC resonant converters. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

State of Charge prediction

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

State of Health predction

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

State variables

Gould, C and Stone, D A and Foster, M P and Bingham, C (2004) State-variable modelling of CLL resonant converters. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

State-variable modelling

Gould, C and Stone, D A and Foster, M P and Bingham, C (2004) State-variable modelling of CLL resonant converters. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

Stochastic noise sources image sensors

Allinson, Nigel (1987) Noise effects in solid-state imagers. In: Colloquium on Noise in Images, 29 January 1987, London.

Stress analysis

Ang, Y. and Foster, M. P. and Sewell, H. I. and Bingham, Chris (2003) Stress analysis of 4th order LLCC resonant converters. In: 10th European Conference on Power Electronics and Applications EPE 2003, 2-4 September, 2003, Toulouse, France.

Supercapacitors

Schofield, N and Yap, H T and Bingham, Chris (2005) Hybrid energy sources for electric and fuel cell vehicle propulsion. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Switched linear system

Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098

Switches

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

Switching circuits

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Terms—Interpolative sigma delta modulators

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Reiss, Joshua D. and Liu, Yan-Qun and Teo, Kok-Lay (2006) Design of interpolative sigma delta modulators via semi-infinite programming. IEEE Transactions on Signal Processing, 54 (10). pp. 4047-4051. ISSN 1053-587x

Three-phase system

Ganthony, D and Bingham, Chris (2007) Integrated series active filter for aerospace flight control surface actuation. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Sweden.

Time delay

Stewart, P. and Gladwin, D. and Stewart, J. and Cowley, R. (2008) Generator voltage stabilisation for series-hybrid electric vehicles. ISA Transactions, 47 (2). pp. 222-228. ISSN 0019-0578

Topology

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

Traction control

Khatun, P. and Bingham, Chris and Schofield , N. and Mellor, P. H. (1999) Anti-lock braking/traction control for a high-performance all-electric racing vehicle. In: PCIM Europe 1999, Power Conversion Intelligent Motion Conference, 22-24 June 1999, Nurnberg, Germany.

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

Two-channel linear phase FIR QMF bank minimax design

Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Two-channel linear phase FIR QMF bank minimax design via global nonconvex optimization programming. IEEE Transactions on Signal Processing, 58 (8). pp. 4436-4441. ISSN 1058-587x

Two-degree-of-freedom

Wu, Y. and Schofield, N. and Bingham, Chris and Howe, D. and Stone, D. A. (2001) Design of robust current tracking control for active power filters. In: Electric Machines and Drives Conference, 2001. IEMDC 2001. IEEE International , 17-20 June 2001, MIT, USA.

Unity power factor

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, M P (2006) Single phase matrix converter for radio frequency induction heating. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Upper bound

Liu, Weiqiang and Srivastava, Saket and Lu, Liang and O'Neill, Maire and Swartzlander, Earl E. (2013) Power analysis attack of QCA circuits: a case study of the Serpent cipher. In: Circuits and Systems (ISCAS), 2013 IEEE International Symposium on, 19-23 May 2013, Beijing, China.

Variable speed drives

Snary, P and Bingham, Chris and Stone, D A and Schofield, N (2003) Drive systems for operation on deep-sea ROVs. In: 10th European conference on Power Electronics and Applications, 2-4 September 2003, Toulouse, France.

Vector control

Bhangu, B S and Snary, P and Bingham, Chris and Stone, D A (2005) Sensorless control of deep-sea ROVs PMSMs excited by matrix converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Voltage ranges, Magnetic materials

Ahmed, Amr and Shadrokh, Y. and Coulbeck, L. and Castellazzi, A. and Johnson, C. M. (2012) A closed-loop IGBT non-destructive tester. Microelectronics Reliability, 52 (9-10). pp. 2358-2362. ISSN 0026-2714

Weightless multi-criterion functional inequality constrained optimization problem

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei (2008) Linear phase FIR two-channel uniform maximally decimated modulated filter bank design via a weightless multi-criterion functional inequality constrained optimization approach. In: The 2nd International Conference on Information Systems Sciences, 18-20 December 2008, Dalian, China.

ZVS converters

Gilbert, A .J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Gilbert, A. J. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Williams, D. R. and Bingham, Chris and Stone, D. A. and Foster , M. P. and Gilbert, A. (2007) Analysis of self-oscillating DC-DC resonant power converters using a hysteretic relay. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Zebra batteries

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

active magnetic bearings

Peel, D. and Bingham, Chris and Wu, Y. and Howe, D. (2002) Simplified characteristics of active magnetic bearings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 216 (5). pp. 623-628. ISSN 0954-4062

Wu, Z. Y. and Howe, D. and Peel, D. and Bingham, Chris (1999) Modelling, identification and control of an AMB system for the support of a high-speed flywheel. In: 5th International Symposium on Magnetic Bearing Technology, Dec 1999, Santa Barbara, USA.

allpass complementary FIR filters

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam , Peter Kwong-Shun and Teo, Kok-Lay (2005) Design of nonuniform near allpass complementary FIR filters via a semi-infinite programming technique. IEEE Transactions on Signal Processing, 53 (1). pp. 376-380. ISSN 1053-587x

anti lock braking

Khatun, P and Bingham, Chris and Schofield, N and Mellor, P H (2003) Application of Fuzzy control algorithms for electric vehicle antilock braking/traction control systems. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 52 (5). pp. 1356-1364. ISSN 0018-9545

anti-lock braking

Khatun, P. and Bingham, Chris and Schofield , N. and Mellor, P. H. (1999) Anti-lock braking/traction control for a high-performance all-electric racing vehicle. In: PCIM Europe 1999, Power Conversion Intelligent Motion Conference, 22-24 June 1999, Nurnberg, Germany.

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

approximation theory

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

arbitrary pixel precisions

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Giovanni, Blasi S and Chi, Zhi-Wei and Siu, Wan-Chi (2010) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. In: IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

back-EMF

Zhu, Z Q and Li , Y and Howe, D and Bingham, Chris and Stone, D A (2007) Influence of machine topology and cross-coupling magnetic saturation on rotor position estimation accuracy in extended back-EMF based sensorless PM brushless AC drives. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. Conference Record of the 2007 IEEE, 23-27 Sept 2007, New Orleans, USA.

batteries

Bhangu, B and Bentley, P and Stone, D A and Bingham, Chris (2005) Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 54 (3). pp. 783-794. ISSN 0018-9545

battery technology

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

bmjfind

Li, Y. and Zhu, Z. Q. and Bingham, Chris and Howe, D. (2005) Sensor fusion for rotor position estimation of permanent magnet brushless AC drives. In: 11th Chinese Automation and Computer Society Conference, September 2005, Sheffield UK.

Schofield, N. and Yap , H. T. and Bingham, Chris (2004) A hydrogen fuel cell vs energy dense battery hybrid energy/power source for an urban electric vehicle. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

cellular automata

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

circuit analysis

Gilbert, A. J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Normalized analysis and design of LCC resonant converters. IEEE Transactions on Power Electronics, 22 (6). pp. 2386-2402. ISSN 0885-8993

constraint transcription method

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2006) Optimal design of magnitude responses of rational infinite impulse response filters. IEEE Transactions on Signal Processing , 54 (10). pp. 4039-4046. ISSN 1053-587x

coprime factorisation

Bingham, Chris and Mellor, P. H. and Howe, D. (1996) Coprime factorisation techniques for multi-axis motion control. In: PCIM 96 Power conversion and intelligent motion conference, 21-23 May 1996, Nurnberg, Germany.

dc-dc converter

Gilbert, A. J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Normalized analysis and design of LCC resonant converters. IEEE Transactions on Power Electronics, 22 (6). pp. 2386-2402. ISSN 0885-8993

Wilkie, K. D. and Foster, M. P. and Stone, D. A. and Bingham, C. M. (2008) Hardware-in-the-loop tuning of a feedback controller for a buck converter using a GA. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Williams, D. R. and Bingham, Chris and Stone, D. A. and Foster , M. P. and Gilbert, A. (2007) Analysis of self-oscillating DC-DC resonant power converters using a hysteretic relay. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

deep sea autonomous vehicles

Snary, P and Bhangu, B and Bingham, Chris and Stone, D A and Schofield, N (2005) Matrix converters for sensorless control of PMSMs and other auxiliaries on deep-sea ROVs. IEE Journal of Electric Power Applications, 152 (2). pp. 382-392. ISSN 1751-8660

deep sear remote vehicles

Snary, P. and Banghu, B. and Bingham, Chris and Stone, D. A. (2004) Matrix converters for sensorless control of PMSMs and other auxiliaries on deep-sea ROVs. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 March - 2 April 2004, Edinburgh, Scotland.

deep-sea remote vehicles

Snary, P. and Bingham, Chris and Stone, D. A. (2001) Commercial electronic devices for operation in high-pressure deep-sea drive systems. In: PCIM 2001 Power Conversion and Intelligent Motion Conference, 19-21 June 2001, Nurnberg, Germany.

disturbance attenuation

Duan, G. R. and Wu, Z. Y. and Bingham, Chris and Howe , D. (1999) Robust active magnetic dearing control using stabilizing dynamical compensators. In: Electric Machines and Drives, 1999. International Conference IEMD '99 , 09-12 May 1999, Seattle, USA.

dual parameterization

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam , Peter Kwong-Shun and Teo, Kok-Lay (2005) Design of nonuniform near allpass complementary FIR filters via a semi-infinite programming technique. IEEE Transactions on Signal Processing, 53 (1). pp. 376-380. ISSN 1053-587x

Ho , Charlotte Yuk Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2006) Efficient algorithm for solving semi-infinite programming problems and their applications to nonuniform filter bank designs. IEEE Transactions on Signal Processing , 54 (11). 4223 -4232. ISSN 1053-587X

dynamical compensators

Duan, G. R. and Wu, Z. Y. and Bingham, Chris and Howe , D. (1999) Robust active magnetic dearing control using stabilizing dynamical compensators. In: Electric Machines and Drives, 1999. International Conference IEMD '99 , 09-12 May 1999, Seattle, USA.

electric smart car

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

electric vehicle

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Gould, C and Bingham, C M and Stone, D A and Bentley, P (2008) Battery health determination by subspace parameter estimation and sliding mode control for an all-electric Personal Rapid Transit vehicle — the ULTra. In: Power Electronics Specialists Conference, 2008. PESC 2008. IEEE , 15-19 June 2008, Rhodes, Greece.

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

electric vehicles

Bhangu, B and Bentley, P and Stone, D A and Bingham, Chris (2005) Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 54 (3). pp. 783-794. ISSN 0018-9545

Khatun, P and Bingham, Chris and Schofield, N and Mellor, P H (2003) Application of Fuzzy control algorithms for electric vehicle antilock braking/traction control systems. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 52 (5). pp. 1356-1364. ISSN 0018-9545

Schofield, N and Yap, H T and Bingham, Chris (2005) Hybrid energy sources for electric and fuel cell vehicle propulsion. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

West, M J and Bingham, Chris and Schofield, N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , 1-4 June 2003, Wisconsin, USA.

electrical drives

O'Sullivan, T and Bingham, Chris and Schofield, N (2007) Observer-based tuning of two-inertia servo-drive systems with integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 52 (2). pp. 1080-1091. ISSN 0278-0046

electromagnetic device

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Howe, D. and Peel , D. (1996) Experimental non-linear control of an electromagnetic vibratory pile-driver with DSP based implementation. In: EPE Chapter Symposium on Electric Drive Design and Applications, June 1996, Nancy, France.

electromechanical actuation

Raimondi, G. and McFarlane, R. and Bingham, Chris and Atallah, K. and Howe, D. and Mellor, P. H. and Capewell, R. and Whitley, C. (1998) Large electromechanical actuation systems for flight control surfaces. In: IEE Colloquium on All Electric Aircraft , 17 June 1998, London, England.

electromechanical pile-driver

Musgrave, D. and Stone, D. A. and Bingham, Chris and Howe, D. (1998) Modelling and control of an electrically actuated vibratory system. In: ICEM'98 International conference on Electrical Machines, 2-4 Sept 1998, Istanbul, Turkey.

energy storage

West, M J and Bingham, Chris and Schofield, N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International , 1-4 June 2003, Wisconsin, USA.

error analysis

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

error power estimation

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

extended kalman filter

Bhangu, B. and Bingham, Chris and Coles, J. and Williams, C. (2002) EKFs and other nonlinear state estimation techniques for sensorless control of automotive PMSMs. In: Speedam Conference 2002, 11-14 June 2002, Ravello, Italy.

Gilbert, A. J. and Bingham, Chris and Bhangu, B. and Foster, M. P. (2004) EKF based feedback control of 3rd order LCC resonant converters with significant load variations. In: EPE-PEMC 2004 - International Power Electronics and Motion Control Conference 2004, 2004, Riga, Latvia.

filled function

Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Two-channel linear phase FIR QMF bank minimax design via global nonconvex optimization programming. IEEE Transactions on Signal Processing, 58 (8). pp. 4436-4441. ISSN 1058-587x

finite element modelling

Mitchell, J. K. and Jewell, G. J. and Wang, J. and Bingham, Chris and Howe, David (2002) Influence of an aperture on the performance of a two-degree-of-freedom iron-cored spherical permanent-magnet actuator. IEEE Transactions on Magnetics, 38 (6). pp. 3650-3653. ISSN 0018-9464

flight control actuators

Atallah, K. and Kaparrelli, F. and Bingham, Chris and Mellor, P. and Howe, D. and Cossar, C. and Kjaer, P. and Gribble, J. and Miller, T. J. E. and Capewell, R. and Whitley, C. (1999) Comparison of electrical drive technologies for aircraft flight control surface actuation. In: Electrical Machines and Drives, 1999. Ninth International Conference on (Conf. Publ. No. 468) , 1-3 September 1999, Canterbury, UK.

flywheel energy storage

Wu, Y. and Bingham, Chris and Peel, D. and Howe, D. (2001) Active magnetic bearings for a flywheel peak power buffer for electric vehicles. International Journal of Applied Electromagnetics and Mechanics, 15 (1). pp. 201-206. ISSN 1383-5416

frequency response of the prototype filter

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Optimal cosine modulated nonuniform linear phase FIR filter bank design via stretching and shifting frequency response of prototype filter. In: 7th IEEE, IET International Symposium on Communication Systems, Networks, and Digital Signal Processing, 21 - 23 July 2010, Northumbria University, Newcastle upon Tyne.

fuel cells

Schofield, N and Yap, H T and Bingham, Chris (2005) Hybrid energy sources for electric and fuel cell vehicle propulsion. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

functional inequality constraints

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Shikh-Bahaei, Mohammad and Liu, Yan-Qun and Teo, Kok-Lay (2008) Design of near allpass strictly stable minimal phase real valued rational IIR filters. IEEE Transactions on Circuits and Systems II, 55 (8). pp. 781-785. ISSN 1549-7747

global optimization.

Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Two-channel linear phase FIR QMF bank minimax design via global nonconvex optimization programming. IEEE Transactions on Signal Processing, 58 (8). pp. 4436-4441. ISSN 1058-587x

h-bridge converter

Nguyen-Quang, N. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Comparison of single-phase matrix converter and H-bridge converter for radio frequency induction heating. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

halbach magnetization

Jakeman, N. and Bullough, W. and Bingham, C. M. and Mellor, P. H. (2004) Brushless PM linear actuator for high acceleration textile winding applications. ISAST Transactions on Electronics and Signal Processing, 19 (1). pp. 237-242. ISSN 1383-5416

harmonic distortion

Mosely, I. and Mellor, P. H. and Bingham, Chris (2002) Effect of dead time on harmonic distortion in class-D audio power amplifiers. IEE Electronics Letters , 35 (12). pp. 950-952. ISSN 0013-5194

hybrid global optimization method

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2006) Optimal design of magnitude responses of rational infinite impulse response filters. IEEE Transactions on Signal Processing , 54 (10). pp. 4039-4046. ISSN 1053-587x

impedance matching

Sewell, H. I. and Stone, D. A. and Bingham, Chris (2001) Dynamic load impedance matching for induction heater systems. In: International Seminar on Heating by Internal Sources, 12-14 Sept 2001, Padua, Italy.

induction heater

Sewell, H. I. and Stone, D. A. and Bingham, C. M. (1999) Simulink based macro-model of a voltage-source induction heater. In: PCIM Europe 1999, Power Conversion Intelligent Motion Conference, 22-24 June 1999, Nurnberg, Germany.

Sewell, H. I. and Stone, D. A. and Bingham, Chris (2001) Digital control improves three-phase induction heater performance. In: PCIM 2001 Power Conversion and Intelligent Motion Conference, 19-21 June 2001, Nurnberg, Germany.

induction heating

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, M P (2006) Single phase matrix converter for radio frequency induction heating. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

Nguyen-Quang, N. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Comparison of single-phase matrix converter and H-bridge converter for radio frequency induction heating. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

Sewell, H. I. and Stone, D. A. and Bingham, Chris (2001) Dynamic load impedance matching for induction heater systems. In: International Seminar on Heating by Internal Sources, 12-14 Sept 2001, Padua, Italy.

Sewell, H I and Stone, D A and Bingham, Chris (2003) Dynamic load impedance matching for induction heater systems. The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 22 (1). pp. 30-38. ISSN 0332-1649

induction motor

O'Sullivan, T. and Schofield, N. and Bingham, Chris (2004) Simulation and experimental validation of induction machine dynamics driving multi-inertial loads. International Journal of Applied Electromagnetics and Mechanics, 19 (1-4). pp. 231-236. ISSN 1383-5416

O'Sullivan, T. M. and Schofield, N. and Bingham, Chris (2003) Simulation and experimental validation of induction machine dynamics driving multi-inertial loads. In: Eleventh International Symposium on Applied Electromagnetics and Mechanics, ISEM-Versailles, 2003, Versailles, France.

interior permanent magnet synchronous machines

Bhangu, B S and Bingham, Chris (2004) GA-based tuning of nonlinear observers for sensorless control of IPMSMs. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

interval systems

Duan, G. R. and Wu, Z. Y. and Bingham, Chris and Howe , D. (1999) Robust active magnetic dearing control using stabilizing dynamical compensators. In: Electric Machines and Drives, 1999. International Conference IEMD '99 , 09-12 May 1999, Seattle, USA.

kalman filter

Bhangu, B and Bentley, P and Stone, D A and Bingham, Chris (2005) Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 54 (3). pp. 783-794. ISSN 0018-9545

linear actuator

Jakeman, N. and Bullough, W. and Bingham, C. M. and Mellor, P. H. (2004) Brushless PM linear actuator for high acceleration textile winding applications. ISAST Transactions on Electronics and Signal Processing, 19 (1). pp. 237-242. ISSN 1383-5416

Jakeman, N. and Bullough, W. A. and Bingham, Chris and Mellor, P. H. (2003) Brushless PM linear actuator for high acceleration winding applications. In: Eleventh International Symposium on Applied Electromagnetics and Mechanics, ISEM-Versailles, 2003, Versaillles, France.

linear actuators

Jakeman, N. and Mellor, P. H. and Bullough, W. A. and Bingham, Chris (2000) High performance linear actuators for demanding textile applications. In: MECHATRONICS 2000. Seventh Mechatronics Forum International Conference and Mechatronics Education Workshop, 2000, Atlanta, USA.

linear drives

Jakeman, N and Bullough, W and Bingham, Chris and Mellor, Phillip (2003) A novel linear direct drive system for textile winding applications. In: European Power Electronics and Drives conference EPE 2003, 2-4 September 2003, Toulouse, France.

magnetic bearings

Duan, G R and Wu, Z Y and Bingham, Chris and Howe, D (2000) Robust magnetic bearing control using stabilizing dynamical compensators. IEEE Transactions on Industry Applications, 36 (6). pp. 1654-1660. ISSN 0093-9994

Duan, G. R. and Wu, Z. Y. and Bingham, Chris and Howe , D. (1999) Robust active magnetic dearing control using stabilizing dynamical compensators. In: Electric Machines and Drives, 1999. International Conference IEMD '99 , 09-12 May 1999, Seattle, USA.

Wu, Y. and Bingham, Chris and Peel, D. and Howe, D. (2001) Active magnetic bearings for a flywheel peak power buffer for electric vehicles. International Journal of Applied Electromagnetics and Mechanics, 15 (1). pp. 201-206. ISSN 1383-5416

magnetic composites

Buckley, J. M. and Atallah, K. and Bingham, Chris and Mellor , P. H. (1996) Use of composites in self-powered roller technology. In: ECCM-7 Seventh European Conference on Composite Materials, 14-16 May 1996, London UK.

magnetic gearbox

Montague, R. G. and Bingham, Chris and Atallah, K. (2010) Magnetic gear dynamics for servo control. In: MELECON 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference , 26-28 April 2010, Valetta, Malta.

matrix converter

Nguyen-Quang, N. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Comparison of single-phase matrix converter and H-bridge converter for radio frequency induction heating. In: Power Electronics and Applications, 2007 European Conference on , 2-5 September 2007, Aalborg, Denmark.

matrix energy converters

Snary, P and Bhangu, B and Bingham, Chris and Stone, D A and Schofield, N (2005) Matrix converters for sensorless control of PMSMs and other auxiliaries on deep-sea ROVs. IEE Journal of Electric Power Applications, 152 (2). pp. 382-392. ISSN 1751-8660

matrix power converter

Bhangu, B S and Snary, P and Bingham, Chris and Stone, D A (2005) Sensorless control of deep-sea ROVs PMSMs excited by matrix converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, M P (2006) Single phase matrix converter for radio frequency induction heating. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on , 23-26 May 2006, Sicily, Italy.

matrix power converters

Snary, P. and Banghu, B. and Bingham, Chris and Stone, D. A. (2004) Matrix converters for sensorless control of PMSMs and other auxiliaries on deep-sea ROVs. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 March - 2 April 2004, Edinburgh, Scotland.

minimal control

Duan, G. R. and Wu, Z. Y. and Bingham, Chris and Howe , D. (1999) Robust active magnetic dearing control using stabilizing dynamical compensators. In: Electric Machines and Drives, 1999. International Conference IEMD '99 , 09-12 May 1999, Seattle, USA.

minimal phase

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Shikh-Bahaei, Mohammad and Liu, Yan-Qun and Teo, Kok-Lay (2008) Design of near allpass strictly stable minimal phase real valued rational IIR filters. IEEE Transactions on Circuits and Systems II, 55 (8). pp. 781-785. ISSN 1549-7747

minimax nonsmooth optimization problem

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Shikh-Bahaei, Mohammad and Liu, Yan-Qun and Teo, Kok-Lay (2008) Design of near allpass strictly stable minimal phase real valued rational IIR filters. IEEE Transactions on Circuits and Systems II, 55 (8). pp. 781-785. ISSN 1549-7747

model transformation technique

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2008) Optimal PWM control of switched-capacitor DC/DC power converters via model transformation and enhancing control techniques. IEEE Transactions on Circuits and Systems I: Regular Papers, 55 (5). 1382 -1391. ISSN 1549-8328

more electric aircraft

Atallah, K. and Caparelli, F. and Bingham, Chris and Schofield, N. and Howe, D. and Mellor, P. H. and Maxwell, C. and Moorhouse, D. and Whitley, C. (1999) Permanent magnet brushless drives for aircraft flight control surface actuation. In: Electrical Machines and Systems for the More Electric Aircraft (Ref. No. 1999/180), IEE Colloquium on , 1999, London, England.

Ganthony, D. and Schofield, N. and Bingham, Chris and Trainer, D. (2004) conditioning of aircraft flight control surface loads. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

motion control

Montague, R. G. and Bingham, Chris and Atallah, K. (2010) Magnetic gear dynamics for servo control. In: MELECON 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference , 26-28 April 2010, Valetta, Malta.

O'Sullivan, T and Bingham, Chris and Schofield, N (2007) Observer-based tuning of two-inertia servo-drive systems with integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 52 (2). pp. 1080-1091. ISSN 0278-0046

motion estimation with motion vectors

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Giovanni, Blasi S and Chi, Zhi-Wei and Siu, Wan-Chi (2010) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. In: IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

multi axis control

Bingham, Chris and Mellor, P. H. and Howe, D. (1996) Coprime factorisation techniques for multi-axis motion control. In: PCIM 96 Power conversion and intelligent motion conference, 21-23 May 1996, Nurnberg, Germany.

multi-inertial load

O'Sullivan, T. M. and Schofield, N. and Bingham, Chris (2003) Simulation and experimental validation of induction machine dynamics driving multi-inertial loads. In: Eleventh International Symposium on Applied Electromagnetics and Mechanics, ISEM-Versailles, 2003, Versailles, France.

multilevel energy converters

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on , 57 (8). pp. 2651-2658. ISSN 0278-0046

multivariable control

Musgrave, D. and Bingham, Chris and Stone, D. A. and Howe, D. (2002) Modelling and multivariable control of a gearless, electrically actuated vibratory system. Electric Power Applications, IEE Proceedings - , 147 (5). pp. 345-352. ISSN 1350-2352

near allpass

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Shikh-Bahaei, Mohammad and Liu, Yan-Qun and Teo, Kok-Lay (2008) Design of near allpass strictly stable minimal phase real valued rational IIR filters. IEEE Transactions on Circuits and Systems II, 55 (8). pp. 781-785. ISSN 1549-7747

noise shaping

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Reiss, Joshua D. and Liu, Yan-Qun and Teo, Kok-Lay (2006) Design of interpolative sigma delta modulators via semi-infinite programming. IEEE Transactions on Signal Processing, 54 (10). pp. 4047-4051. ISSN 1053-587x

non-adiabatic switching power loss

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

non-linear observers

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

nonconvex optimization problem

Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Two-channel linear phase FIR QMF bank minimax design via global nonconvex optimization programming. IEEE Transactions on Signal Processing, 58 (8). pp. 4436-4441. ISSN 1058-587x

nonlinear control

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Peel, D. (1996) DSP based non-linear control of an electrically actuated vibratory pile-driver. In: Symposium on Industrial Drives, Power Quality, Traction Systems, 5-7 June 1996, Italy.

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Peel, D. (1996) Non-linear control of an electromagnetic vibratory pile-driver with DSP based implementation. In: 1996 ICEM International Conference on Electrical Machines, Sept 10-12 1996, Spain.

Musgrave, D. and Stone, D. A. and Bingham, Chris and Howe, D. (1998) Modelling and control of an electrically actuated vibratory system. In: ICEM'98 International conference on Electrical Machines, 2-4 Sept 1998, Istanbul, Turkey.

nonlinear observers

Bhangu, B S and Bingham, Chris (2004) GA-based tuning of nonlinear observers for sensorless control of IPMSMs. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

nonuniform filter banks

Ho , Charlotte Yuk Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2006) Efficient algorithm for solving semi-infinite programming problems and their applications to nonuniform filter bank designs. IEEE Transactions on Signal Processing , 54 (11). 4223 -4232. ISSN 1053-587X

nonuniform frequency bands

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam , Peter Kwong-Shun and Teo, Kok-Lay (2005) Design of nonuniform near allpass complementary FIR filters via a semi-infinite programming technique. IEEE Transactions on Signal Processing, 53 (1). pp. 376-380. ISSN 1053-587x

optimal enhancing control technique

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2008) Optimal PWM control of switched-capacitor DC/DC power converters via model transformation and enhancing control techniques. IEEE Transactions on Circuits and Systems I: Regular Papers, 55 (5). 1382 -1391. ISSN 1549-8328

parameter estimation

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

Gould, C and Bingham, C M and Stone, D A and Bentley, P (2008) Battery health determination by subspace parameter estimation and sliding mode control for an all-electric Personal Rapid Transit vehicle — the ULTra. In: Power Electronics Specialists Conference, 2008. PESC 2008. IEEE , 15-19 June 2008, Rhodes, Greece.

Gould, C and Bingham, Chris and Stone, D A and Bentley, P (2008) Novel battery model of an all-electric personal rapid transit vehicle to determine state-of-health through subspace parameter estimation and a Kalman Estimator. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Gould, C. and Bingham, Chris and Stone, D. A. and Bentley, P. (2009) New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques. Vehicular Technology, IEEE Transactions on , 58 (8). pp. 3905-3916. ISSN 0018-9545

Liu, Kan and Zhang, Q. and Zhu, Z. Q. and Zhang, J. and Shen, A. W. and Stewart, Paul (2010) Comparison of two novel MRAS strategies for identifying parameters in permanent magnet synchronous motors. International Journal of Automation and Computing, 7 (4). pp. 516-524. ISSN 1476-8186

Wilson, S. D. and Stewart, Paul and Taylor, B. P. (2010) Methods of resistance estimation in permanent magnet synchronous motors for real-time thermal management. IEEE Transactions on Energy Conversion, 25 (3). pp. 698-707. ISSN 0885-8969

permanent magnet actuators

Mitchell, J. K. and Jewell, G. J. and Wang, J. and Bingham, Chris and Howe, David (2002) Influence of an aperture on the performance of a two-degree-of-freedom iron-cored spherical permanent-magnet actuator. IEEE Transactions on Magnetics, 38 (6). pp. 3650-3653. ISSN 0018-9464

permanent magnet brushless machines

Atallah, K. and Caparelli, F. and Bingham, Chris and Schofield, N. and Howe, D. and Mellor, P. H. and Maxwell, C. and Moorhouse, D. and Whitley, C. (1999) Permanent magnet brushless drives for aircraft flight control surface actuation. In: Electrical Machines and Systems for the More Electric Aircraft (Ref. No. 1999/180), IEE Colloquium on , 1999, London, England.

permanent magnet synchronous motor

Bingham, Chris and Stone, D A and Schofield, N and Howe, D and Peel, D (2000) Amplitude and frequency control of a vibratory pile driver. IEEE Transactions on Industrial Electronics, 47 (3). pp. 623-631. ISSN 0278-0046

permanent magnet synchronous motors

Liu, Kan and Zhang, Q. and Zhu, Z. Q. and Zhang, J. and Shen, A. W. and Stewart, Paul (2010) Comparison of two novel MRAS strategies for identifying parameters in permanent magnet synchronous motors. International Journal of Automation and Computing, 7 (4). pp. 516-524. ISSN 1476-8186

Snary, P and Bhangu, B and Bingham, Chris and Stone, D A and Schofield, N (2005) Matrix converters for sensorless control of PMSMs and other auxiliaries on deep-sea ROVs. IEE Journal of Electric Power Applications, 152 (2). pp. 382-392. ISSN 1751-8660

Wilson, S. D. and Stewart, Paul and Taylor, B. P. (2010) Methods of resistance estimation in permanent magnet synchronous motors for real-time thermal management. IEEE Transactions on Energy Conversion, 25 (3). pp. 698-707. ISSN 0885-8969

pmac motor

Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris (2007) Modelling of cross-coupling magnetic saturation in signal injection based sensorless control of permanent magnet AC motors. In: IEEE MMM/Intermag Conference 2007, 6-8 June 2007, Baltimore, USA.

polarization error estimation

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

power electronic drives

Snary, P and Bingham, Chris and Stone, D A and Schofield, N (2003) Drive systems for operation on deep-sea ROVs. In: 10th European conference on Power Electronics and Applications, 2-4 September 2003, Toulouse, France.

power electronics

Snary, P. and Bingham, Chris and Stone, D. A. (2001) Commercial electronic devices for operation in high-pressure deep-sea drive systems. In: PCIM 2001 Power Conversion and Intelligent Motion Conference, 19-21 June 2001, Nurnberg, Germany.

probabilistic automata

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

probabilistic modeling tool

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

prototype filter

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Optimal cosine modulated nonuniform linear phase FIR filter bank design via stretching and shifting frequency response of prototype filter. In: 7th IEEE, IET International Symposium on Communication Systems, Networks, and Digital Signal Processing, 21 - 23 July 2010, Northumbria University, Newcastle upon Tyne.

quantum computing

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

quantum dot cellular automata

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

quantum dots

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

real valued rational IIR filters

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Shikh-Bahaei, Mohammad and Liu, Yan-Qun and Teo, Kok-Lay (2008) Design of near allpass strictly stable minimal phase real valued rational IIR filters. IEEE Transactions on Circuits and Systems II, 55 (8). pp. 781-785. ISSN 1549-7747

reconfigurable control

Bingham, Chris and Atallah, K. and Mellor, P. H. and Buckley, J. M. (1997) Reconfigurable control of brushless AC composite roller systems. In: PCIM Europe 1997, Power Conversion Intelligent Motion Conference, June 10-12 1997, Nurnberg, Germany.

resonant converter

Foster, M. P. and Sewell, H. I. and Bingham, Chris and Stone, D. A. (2002) State-variable modelling of LCC voltage-output resonant converters. Electronics Letters , 37 (17). pp. 1065-1066. ISSN 0013-5194

resonant power convertors

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

robust stabilisation

Duan, G R and Wu, Z Y and Bingham, Chris and Howe, D (2000) Robust magnetic bearing control using stabilizing dynamical compensators. IEEE Transactions on Industry Applications, 36 (6). pp. 1654-1660. ISSN 0093-9994

robust stabilization

Duan, G. R. and Wu, Z. Y. and Bingham, Chris and Howe , D. (1999) Robust active magnetic dearing control using stabilizing dynamical compensators. In: Electric Machines and Drives, 1999. International Conference IEMD '99 , 09-12 May 1999, Seattle, USA.

rotor position estimation

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris (2007) Improved rotor position estimation in extended back-EMF based sensorless PM brushless AC drives with magnetic saliency. In: Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International , 3-5 May 2007, Antalya, Turkey.

Zhu, Z Q and Li, Y and Howe, D and Bingham, Chris (2007) Compensation for rotor position estimation error due to cross-coupling magnetic saturation in signal injection based sensorless control of PM brushless AC motors. In: Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International , 3-5 May 2007, Antalya, Turkey.

saw torque transducer

Schofield, N and O'Sullivan, T M and Bingham, Chris and Lonsdale, A (2004) Improved performance of motor-drive systems by SAW shaft torque feedback. Transactions of the Institute of Measurement and Control, 37 (9). pp. 276-283. ISSN 0142-3312

semi-infinite programming

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam , Peter Kwong-Shun and Teo, Kok-Lay (2005) Design of nonuniform near allpass complementary FIR filters via a semi-infinite programming technique. IEEE Transactions on Signal Processing, 53 (1). pp. 376-380. ISSN 1053-587x

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Reiss, Joshua D. and Liu, Yan-Qun and Teo, Kok-Lay (2006) Design of interpolative sigma delta modulators via semi-infinite programming. IEEE Transactions on Signal Processing, 54 (10). pp. 4047-4051. ISSN 1053-587x

Ho , Charlotte Yuk Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2006) Efficient algorithm for solving semi-infinite programming problems and their applications to nonuniform filter bank designs. IEEE Transactions on Signal Processing , 54 (11). 4223 -4232. ISSN 1053-587X

sensor fusion

Li, Y. and Zhu, Z. Q. and Bingham, Chris and Howe, D. (2005) Sensor fusion for rotor position estimation of permanent magnet brushless AC drives. In: 11th Chinese Automation and Computer Society Conference, September 2005, Sheffield UK.

sensorless control

Li, Y. and Zhu, Z .Q. and Bingham, Chris and Howe, D. (2007) Improved signal injection based sensorless technique for PM brushless AC drives. In: 2007 IEEE International Conference on Networking, Sensing and Control, 15-17 April 2007, London, UK.

series parallel resonant converter

Ang, Y. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2005) Design oriented analysis of fourth-order LCLC converters with capacitive output filter. Institute of Electrical Engineers Journal of Electric Power Applications, 152 (2). pp. 310-322. ISSN 0013-5194

Bingham, Chris and Ang, Y. and Foster, M. P. and Stone, D. A. (2008) Analysis and control of dual-output LCLC resonant converters with significant leakage inductance. IEEE Transactions on Power Electronics, 23 (4). pp. 1724-1732. ISSN 0885-8993

servo drives

Schofield, N. and O'Sullivan, T. and Bingham, Chris (2004) Improved performance of industrial servo-drive systems by saw shaft torque feedback. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

servo mechanism

Montague, R. G. and Bingham, Chris and Atallah, K. (2010) Magnetic gear dynamics for servo control. In: MELECON 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference , 26-28 April 2010, Valetta, Malta.

servo motors

O'Sullivan, T. and Schofield, N. and Bingham, Chris (2004) Improved tracking control of industrial servo-drive system by saw torque feedback. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498) , 31 Mar - 2 April 2004, Edinburgh, Scotland.

single step optimal block

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Giovanni, Blasi S and Chi, Zhi-Wei and Siu, Wan-Chi (2010) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. In: IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

sliding mode control

Gould, C and Bingham, C M and Stone, D A and Bentley, P (2008) Battery health determination by subspace parameter estimation and sliding mode control for an all-electric Personal Rapid Transit vehicle — the ULTra. In: Power Electronics Specialists Conference, 2008. PESC 2008. IEEE , 15-19 June 2008, Rhodes, Greece.

stability

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Reiss, Joshua D. and Liu, Yan-Qun and Teo, Kok-Lay (2006) Design of interpolative sigma delta modulators via semi-infinite programming. IEEE Transactions on Signal Processing, 54 (10). pp. 4047-4051. ISSN 1053-587x

state estimation

Li, Y. and Zhu, Z. Q. and Bingham, Chris and Howe, D. (2005) Sensor fusion for rotor position estimation of permanent magnet brushless AC drives. In: 11th Chinese Automation and Computer Society Conference, September 2005, Sheffield UK.

state of charge

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference , 7-9 Sept 2005, USA.

Bhangu, B and Bentley, P and Stone, D A and Bingham, Chris (2005) Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 54 (3). pp. 783-794. ISSN 0018-9545

state of health

Bhangu, B and Bentley, P and Stone, D A and Bingham, Chris (2005) Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 54 (3). pp. 783-794. ISSN 0018-9545

state of health estimation

Gould, C. and Bingham, Chris and Stone, D. A. and Bentley, P. (2009) New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques. Vehicular Technology, IEEE Transactions on , 58 (8). pp. 3905-3916. ISSN 0018-9545

steady state analysis

Gould, C and Bingham, Chris and Stone, D A and Foster, M P (2004) Rapid steady-state analysis of CLL resonant power converters. In: IASTED International Conference on Circuits, Signals, and Systems - 2004, Nov 28 - Dec 01 2004, Clearwater Beach, Florida USA.

strictly stable

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Chi, Zhi-Wei and Shikh-Bahaei, Mohammad and Liu, Yan-Qun and Teo, Kok-Lay (2008) Design of near allpass strictly stable minimal phase real valued rational IIR filters. IEEE Transactions on Circuits and Systems II, 55 (8). pp. 781-785. ISSN 1549-7747

surface acoustic wave devices

O'Sullivan, T and Bingham, Chris and Schofield, N (2007) Observer-based tuning of two-inertia servo-drive systems with integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 52 (2). pp. 1080-1091. ISSN 0278-0046

OSullivan, T M and Bingham, Chris and Schofield, N (2006) High-performance control of dual-inertia servo-drive systems using low-cost integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 53 (4). pp. 1226-1237. ISSN 0278-0046

switched-capacitor DC/DC power converters

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Liu, Yan-Qun and Tam, Peter Kwong-Shun and Teo, Kok-Lay (2008) Optimal PWM control of switched-capacitor DC/DC power converters via model transformation and enhancing control techniques. IEEE Transactions on Circuits and Systems I: Regular Papers, 55 (5). 1382 -1391. ISSN 1549-8328

system identification

Gould, C and Bingham, Chris and Stone, D A and Bentley, P (2008) Novel battery model of an all-electric personal rapid transit vehicle to determine state-of-health through subspace parameter estimation and a Kalman Estimator. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on , 11-13 June 2008, Ischia, Italy.

Wu, Z. Y. and Howe, D. and Peel, D. and Bingham, Chris (1999) Modelling, identification and control of an AMB system for the support of a high-speed flywheel. In: 5th International Symposium on Magnetic Bearing Technology, Dec 1999, Santa Barbara, USA.

torque control

OSullivan, T M and Bingham, Chris and Schofield, N (2006) High-performance control of dual-inertia servo-drive systems using low-cost integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 53 (4). pp. 1226-1237. ISSN 0278-0046

velocity control

OSullivan, T M and Bingham, Chris and Schofield, N (2006) High-performance control of dual-inertia servo-drive systems using low-cost integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 53 (4). pp. 1226-1237. ISSN 0278-0046

vibration control

Bingham, Chris and Stone, D A and Schofield, N and Howe, D and Peel, D (2000) Amplitude and frequency control of a vibratory pile driver. IEEE Transactions on Industrial Electronics, 47 (3). pp. 623-631. ISSN 0278-0046

OSullivan, T M and Bingham, Chris and Schofield, N (2006) High-performance control of dual-inertia servo-drive systems using low-cost integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 53 (4). pp. 1226-1237. ISSN 0278-0046

voltage sourced

Sewell, H. I. and Stone, D. A. and Bingham, C. M. (1999) Simulink based macro-model of a voltage-source induction heater. In: PCIM Europe 1999, Power Conversion Intelligent Motion Conference, 22-24 June 1999, Nurnberg, Germany.

zero current switching

Gilbert, A J and Bingham, Chris and Stone, D A and Foster, M P (2008) Self-oscillating control methods for the LCC current-output resonant converter. IEEE TRANSACTIONS ON POWER ELECTRONICS, 23 (4). pp. 1973-1986. ISSN 0885–8993

zero voltage switching

Gilbert, A J and Bingham, Chris and Stone, D A and Foster, M P (2008) Self-oscillating control methods for the LCC current-output resonant converter. IEEE TRANSACTIONS ON POWER ELECTRONICS, 23 (4). pp. 1973-1986. ISSN 0885–8993

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

This list was generated on Fri Oct 31 16:31:49 2014 GMT.