Items where Subject is "H Engineering > H321 Turbine Technology"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Blade Blade cleaning CFD CFD Modeling CFD Simulatio CFD modeling; water injection; blade cleaning. CFD. Abiatic cooling Centrifugal forces Condition monitoring Data compression Diagnostics and prognostics Effectiveness Experiment Experimental Measurement Experimental test Gas Turbine Gas Turbines Gas turbines Gas-Water Genetic algorithms Heat transfer High speed drives Hole shape Hole shpae Hybridised clustering algorithm Industrial gas turbines Industrial machines K-means clustering algorithm Lateral vibrations Navier-Stokes equations Numerical methods Principal component analysis Remote monitoring and sensing Rundown vibration signature Sensor validation Shaft deflections Simply supported TURBINE BLADE Three dimensional finite element model Turbine blade Turbochager Water Coverage Water injection Water particle adiabatic cooling effectiveness analytical optimization blade cooling effectiveness blade trailling edge bmjcheck bmjdoi bmjtype computational fluid dynamics; CFD; high temperature; turbine blades; service lifetime; cooling hole geometries; simulation; modelling; penetration depth; coolant jet flow; entrainment; hot fluids; vortex structures. cooling cooling hole geometry detached eddy energy loss experimental methods fillm cooling finite volume methods gas turbines heat transfer heatTransfer hole shape hole shape effect laminar cross flow mixing momentum flux nonuniform filter banks performance predictive maintenance trend extraction turbine blade cleaning turbocharger turbulent flow two-phase flow water injectio
Number of items at this level: 90.

Blade

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

Blade cleaning

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blade cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849

CFD

Agbonzikilo, Festus and Stewart, Jill and Sadasivuni, Suresh Kumar and Owen, Ieuan and Riley, Mike and Sanderson, Victoria (2014) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. In: ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany.

Maidi, M. and Yao, Y. and Yao, Jun (2009) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: New trends in fluid mechanics research. Springer, pp. 416-419. ISBN 3540759948

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

Yao, J. and Yao, Y. and Mason, P. and Zhang, T. (2008) CFD modeling of water injection flow for turbine blades cleaning. In: The Second International Symposium on Physics of Fluids (ISPF)2), , June, 2008, Nanjing, China.

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes , F. J. G. and Roach, P. E. (2007) Computational prediction of flow behaviour and energy losses in turbocharger. In: Proceeding of the Fifth International Conference on Fluid Mechanics, 15-19 August 2007, Shanghai, China.

Yao, Jun and Sian, Sohan and Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014 , 13 - 17 January 2014, National Harbor, Maryland.

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

CFD Modeling

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blade cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849

CFD Simulatio

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2008) CFD simulation of gas–water two-phase flow in turbocharger. In: Fifth International Conference on Computational Fluid Dynamics (ICCFD5), July 7 – 11, 2008, Seoul, South Korean.

CFD modeling; water injection; blade cleaning.

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blade cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849

CFD. Abiatic cooling

Sian, S and Yao, J and Yao, Y (2010) Effect of hole shape on adiabatic cooling effectiveness. In: WCE 2009, July 2-4, 2009, Imperial College, London, UK.

Centrifugal forces

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Condition monitoring

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Data compression

Chen, Jun and Gallimore, Michael and Bingham, Chris and Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Diagnostics and prognostics

Chen, Jun and Gallimore, Michael and Bingham, Chris and Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Effectiveness

Sian, S and Yao, J and Yao, Y (2010) Effect of hole shape on adiabatic cooling effectiveness. In: WCE 2009, July 2-4, 2009, Imperial College, London, UK.

Yao, Jun and Sian, Sohan and Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

Experiment

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

Experimental Measurement

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

Experimental test

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Gas Turbine

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Gas Turbines

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Gas turbines

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Gas-Water

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2008) CFD simulation of gas–water two-phase flow in turbocharger. In: Fifth International Conference on Computational Fluid Dynamics (ICCFD5), July 7 – 11, 2008, Seoul, South Korean.

Genetic algorithms

Chen, Jun and Gallimore, Michael and Bingham, Chris and Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Heat transfer

Yao, Yufeng and Yao, Jun and Effendy, M. (2012) Evaluation of wall heat transfer in turbine blade trailing-edge passage. In: The 2nd Int. Conf. on Engineering and Technology Innovation, November 2012, Kaohsiung, Taiwan.

High speed drives

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Hole shape

Sian, S and Yao, J and Yao, Y (2010) Effect of hole shape on adiabatic cooling effectiveness. In: WCE 2009, July 2-4, 2009, Imperial College, London, UK.

Hole shpae

Yao, Jun and Sian, Sohan and Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

Hybridised clustering algorithm

Chen, Jun and Gallimore, Michael and Bingham, Chris and Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Industrial gas turbines

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Industrial machines

Chen, Jun and Gallimore, Michael and Bingham, Chris and Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

K-means clustering algorithm

Chen, Jun and Gallimore, Michael and Bingham, Chris and Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Lateral vibrations

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Navier-Stokes equations

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

Numerical methods

Agbonzikilo, Festus and Stewart, Jill and Sadasivuni, Suresh Kumar and Owen, Ieuan and Riley, Mike and Sanderson, Victoria (2014) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. In: ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany.

Principal component analysis

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Remote monitoring and sensing

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Rundown vibration signature

Chen, Jun and Gallimore, Michael and Bingham, Chris and Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Sensor validation

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Shaft deflections

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Simply supported

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

TURBINE BLADE

Yao, Yufeng and Yao, Jun and Effendy, M. (2012) Evaluation of wall heat transfer in turbine blade trailing-edge passage. In: The 2nd Int. Conf. on Engineering and Technology Innovation, November 2012, Kaohsiung, Taiwan.

Three dimensional finite element model

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Turbine blade

Effendy, M. and Yao, Y. and Yao, J. (2013) Comparison study of turbine blade with trailing-edge cutback coolant ejection designs. In: 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 7-10 January 2013, Grapevine, TX.

Turbochager

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2008) CFD simulation of gas–water two-phase flow in turbocharger. In: Fifth International Conference on Computational Fluid Dynamics (ICCFD5), July 7 – 11, 2008, Seoul, South Korean.

Water Coverage

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

Water injection

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blade cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849

Water particle

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

adiabatic cooling effectiveness

Yao, Jun and Sian, Sohan and Yao, Yufeng and Davis, Tony W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B: Condensed Matter and Statistical Physics , 13 (24). pp. 1295-1298. ISSN 0217-9849

Yao, Jun and Yao, Yufeng (2011) Computational study of hole shape effect on film cooling performance. Journal of Power and Energy, 225 (4). 505-519. ISSN 0957-6509

analytical optimization

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

blade cooling effectiveness

Yao, Yufeng and Yao, Jun (2010) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 4 (2). pp. 242-248. ISSN 1755-9758

blade trailling edge

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014 , 13 - 17 January 2014, National Harbor, Maryland.

bmjcheck

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

Yao, Yufeng and Yao, Jun and Effendy, M. (2012) Evaluation of wall heat transfer in turbine blade trailing-edge passage. In: The 2nd Int. Conf. on Engineering and Technology Innovation, November 2012, Kaohsiung, Taiwan.

bmjdoi

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

bmjtype

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

computational fluid dynamics; CFD; high temperature; turbine blades; service lifetime; cooling hole geometries; simulation; modelling; penetration depth; coolant jet flow; entrainment; hot fluids; vortex structures.

Yao, Yufeng and Yao, Jun (2010) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 4 (2). pp. 242-248. ISSN 1755-9758

cooling

Yao, Jun and Sian, Sohan and Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

cooling hole geometry

Yao, Jun and Yao, Yufeng (2011) Computational study of hole shape effect on film cooling performance. Journal of Power and Energy, 225 (4). 505-519. ISSN 0957-6509

detached eddy

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014 , 13 - 17 January 2014, National Harbor, Maryland.

energy loss

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes , F. J. G. and Roach, P. E. (2007) Computational prediction of flow behaviour and energy losses in turbocharger. In: Proceeding of the Fifth International Conference on Fluid Mechanics, 15-19 August 2007, Shanghai, China.

experimental methods

Agbonzikilo, Festus and Stewart, Jill and Sadasivuni, Suresh Kumar and Owen, Ieuan and Riley, Mike and Sanderson, Victoria (2014) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. In: ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany.

fillm cooling

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014 , 13 - 17 January 2014, National Harbor, Maryland.

finite volume methods

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

gas turbines

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

heat transfer

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes , F. J. G. and Roach, P. E. (2007) Computational prediction of flow behaviour and energy losses in turbocharger. In: Proceeding of the Fifth International Conference on Fluid Mechanics, 15-19 August 2007, Shanghai, China.

heatTransfer

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2008) CFD simulation of gas–water two-phase flow in turbocharger. In: Fifth International Conference on Computational Fluid Dynamics (ICCFD5), July 7 – 11, 2008, Seoul, South Korean.

hole shape

Yao, Yufeng and Yao, Jun (2010) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 4 (2). pp. 242-248. ISSN 1755-9758

hole shape effect

Yao, Jun and Sian, Sohan and Yao, Yufeng and Davis, Tony W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B: Condensed Matter and Statistical Physics , 13 (24). pp. 1295-1298. ISSN 0217-9849

laminar cross flow

Maidi, M. and Yao, Y. and Yao, Jun (2009) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: New trends in fluid mechanics research. Springer, pp. 416-419. ISBN 3540759948

mixing

Agbonzikilo, Festus and Stewart, Jill and Sadasivuni, Suresh Kumar and Owen, Ieuan and Riley, Mike and Sanderson, Victoria (2014) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. In: ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany.

momentum flux

Agbonzikilo, Festus and Stewart, Jill and Sadasivuni, Suresh Kumar and Owen, Ieuan and Riley, Mike and Sanderson, Victoria (2014) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. In: ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany.

nonuniform filter banks

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

performance

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014 , 13 - 17 January 2014, National Harbor, Maryland.

predictive maintenance

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

trend extraction

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

turbine blade cleaning

Yao, J. and Yao, Y. and Mason, P. and Zhang, T. (2008) CFD modeling of water injection flow for turbine blades cleaning. In: The Second International Symposium on Physics of Fluids (ISPF)2), , June, 2008, Nanjing, China.

turbocharger

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes , F. J. G. and Roach, P. E. (2007) Computational prediction of flow behaviour and energy losses in turbocharger. In: Proceeding of the Fifth International Conference on Fluid Mechanics, 15-19 August 2007, Shanghai, China.

turbulent flow

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

two-phase flow

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

water injectio

Yao, J. and Yao, Y. and Mason, P. and Zhang, T. (2008) CFD modeling of water injection flow for turbine blades cleaning. In: The Second International Symposium on Physics of Fluids (ISPF)2), , June, 2008, Nanjing, China.

This list was generated on Mon Jul 28 21:28:21 2014 BST.