Items where Subject is "H Engineering > H300 Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Ablation Ablation Rate Ablation Threshold Advanced High Strength Steels Alignment Autoparametric structure Bending Bisphenol A Polycarbonate CFD Closed Liquid Immersion Composite beams Coupled modes DP1000 Debris Control ERW Steel Tube Essential nonlinearity Etch Rate Euler-Bernoulli beams Excimer Feature FEM Finite Element Modelling Flexible systems Flow Velocity Forming Georgiades Georgiadis IC Engines KrF excimer laser L-shaped beam L-shaped beam structure Laser Laser Bending Laser Forming Laser Materials Processing Liquid Chemistry Liquid Immersion Localized NNMs MEMS Marine turbines Micro-adjustment Modal analysis Multi-scaled analysis NNMs Non-linear resonance Non-linear targeted energy pumping Nonlinear Modal Analysis Nonlinear damped transitions Nonlinear equations of motion Nonlinear modal analysis Nonlinear targeted energy transfer Nonlinear targeted energy transfers Open Thin Film Open Thin Film Liquid Immersion Plume Distortion Power coefficient Pulsed lasers Quality Reynolds stress anisotropy Rotating structures Scaling TGM Temperature Gradient Mechanism (TGM) Thin Film Liquid Immersion Thrust coefficient Timoshenko beam model Topography Torque coefficient Velocity profile Vibrations of composite beam Warping active delta wings aerodynamic loads airwake bmjdoid bmjolf combustion convection debris control dual-fuel dynamic interface elastic continua dynamics engine modeling engineering excitation of NNMs fin stack finite element modelling finite elements finite-element analysis footwear footwear testing heat pipes heat sink heat transfer enhancement helicopter loads inerter laser laser materials processing linear equations of motion marine current turbines maritime helicopter modal analysis near-wake nonlinear modal interactions oapaid passive network photonics pilot workload prosthetic foot railway vehicle rapid prototyping ride quality scoustic doppler velocimeter selective laser melting ship airwake ship design shock isolation tidal energy tidal stream turbines train suspension turbulence statistics validation vibro-impact oscillators virtual testing vortex generators water tunnel tests
Number of items at this level: 185.

Ablation

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Ablation Rate

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Ablation Threshold

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Advanced High Strength Steels

Edwardson, Stuart and Griffiths, Jonathan David and Sheikholeslami, Ghazal and Dearden, Geoff (2014) Optimization of beam mode for high efficiency laser thermal forming within metallurgical constraints. Physics Procedia . ISSN 1875-3892 (In Press)

Alignment

Sheikholeslami, Ghazal and Griffiths, Jonathan David and Edwardson, Stuart and Watkins, Ken and Dearden, Geoff (2013) Laser forming of ERW steel square tubes within metallurgical constraints. Key Engineering Materials, 549 . ISSN 1013-9826

Autoparametric structure

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270

Bending

Sheikholeslami, Ghazal and Griffiths, Jonathan David and Edwardson, Stuart and Watkins, Ken and Dearden, Geoff (2013) Laser forming of ERW steel square tubes within metallurgical constraints. Key Engineering Materials, 549 . ISSN 1013-9826

Bisphenol A Polycarbonate

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

CFD

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

Closed Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Composite beams

Latalski, Jaroslaw and Georgiades, Fotios and Warminski, Jerzy (2012) Rational placement of a macro fibre composite actuator in composite rotating beams. Journal of Physics: Conference Series, 382 (1). p. 2021. ISSN 1742-6588

Coupled modes

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica . ISSN 0025-6455

DP1000

Edwardson, Stuart and Griffiths, Jonathan David and Sheikholeslami, Ghazal and Dearden, Geoff (2014) Optimization of beam mode for high efficiency laser thermal forming within metallurgical constraints. Physics Procedia . ISSN 1875-3892 (In Press)

Debris Control

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

ERW Steel Tube

Sheikholeslami, Ghazal and Griffiths, Jonathan David and Edwardson, Stuart and Watkins, Ken and Dearden, Geoff (2013) Laser forming of ERW steel square tubes within metallurgical constraints. Key Engineering Materials, 549 . ISSN 1013-9826

Essential nonlinearity

Panagopoulos, Panayotis and Georgiades, Fotios and Tsakirtzis, Stylianos and Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683

Etch Rate

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Euler-Bernoulli beams

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270

Excimer Feature

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

FEM

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2012) Thermal laser micro-adjustment using ultra-short pulses. In: 37th international MATADOR conference, 25th-27th July 2012, Manchester, UK.

Finite Element Modelling

Griffiths, Jonathan David (2012) Modelling of laser forming at macro and micro scales. PhD thesis, University of Liverpool.

Flexible systems

Georgiades, Fotios and Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462

Flow Velocity

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Forming

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

Georgiades

Georgiadis, Fotios and Vakakis, Alexander, F. and McFarland, Michael, D. and Bergman , Lawrence (2005) Shock isolation through passive energy pumping caused by nonsmooth nonlinearities. International Journal of Bifurcation and Chaos, 15 (6). pp. 1989-2001. ISSN 0218-1274

Georgiadis, Fotios and Vakakis, Alexander, F. and McFarland, Michael, D. and Bergman , Lawrence (2003) Shock isolation through passive energy pumping in a system with piecewise linear stiffnesses. In: 19th Biennial Conference on Mechanical Vibration and Noise, 2 - 6 September 2003, Chicago, Ill..

Georgiadis

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica . ISSN 0025-6455

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2011) Mode shapes variation of a composite beam with piezoelectric patches. Transaction of Aviation Institute / Prace- Instytut Lotnictwa , 218 . pp. 36-43. ISSN 0509-6669

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2007) Localization of energy in a perfectly symmetric bladed disk assembly due to nonlinearities. ASME Proceedings | Advances in Aerospace Technology, 1 . pp. 229-237. ISSN UNSPECIFIED

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2009) Modal analysis of a nonlinear periodic structure with cyclic symmetry. AIAA, 47 (4). pp. 1014-1025. ISSN 0001-1452

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2008) Nonlinear modal analysis and energy localization in a bladed disk assembly. ASME Proceedings | Structures and Dynamics, 5 . pp. 593-600. ISSN UNSPECIFIED

Georgiades, Fotios and Vakakis, Alexander, F. (2007) Dynamics of a linear beam with an attached local nonlinear energy sink. Communications in Nonlinear Science and Numerical Simulation, 12 (5). pp. 643-651. ISSN 1007-5704

Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683

Georgiades, Fotios and Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462

Georgiades, Fotios and Warminski, Jerzy (2011) Excitation of a localized nonlinear normal mode of a bladed disk assembly lump mass nonlinear model. Transactions of Aviation Institute / Prace- Instytut Lotnictwa, 218 (12). pp. 28-35. ISSN 0509-6669

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270

Karayannis, Yannis and Vakakis, Alexander, F. and Georgiades, Fotios (2008) Vibro-impact attachments as shock absorbers. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (10). pp. 1899-1908. ISSN 0954-4062

Panagopoulos, Panayotis and Georgiades, Fotios and Tsakirtzis, Stylianos and Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683

Peeters, Maxime and Georgiades, Fotios and Viguie, Regis and Serandour , G. and Kerschen, Gaetan and Golinval, Jean-Claude (2008) Development of numerical algorithms for practical computation of nonlinear normal modes. In: ISMA 2008 International Conference on Noise and Vibration Engineering, 15-17 SEptember 2008, Leuven, Belgium.

IC Engines

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

KrF excimer laser

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

L-shaped beam

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413

L-shaped beam structure

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270

Georgiades, Fotios and Warminski, Jerzy and Cartmell , Matthew (2012) Linear modal analysis of L-shaped beam structures: parametric studies. Journal of Physics: Conference Series, 382 (1). p. 2006. ISSN 1742-6588

Laser

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Laser micro adjustment using ultra short pulses. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Short pulse thermal laser microforming technique. In: IWOTE'11 International Workshop on Thermal Forming and Welding Distortion, 6th-7th April 2011, Bremen, DE.

Laser Bending

Edwardson, Stuart and Griffiths, Jonathan David and Sheikholeslami, Ghazal and Dearden, Geoff (2014) Optimization of beam mode for high efficiency laser thermal forming within metallurgical constraints. Physics Procedia . ISSN 1875-3892 (In Press)

Laser Forming

Edwardson, Stuart and Griffiths, Jonathan David and Sheikholeslami, Ghazal and Dearden, Geoff (2014) Optimization of beam mode for high efficiency laser thermal forming within metallurgical constraints. Physics Procedia . ISSN 1875-3892 (In Press)

Griffiths, Jonathan David (2012) Modelling of laser forming at macro and micro scales. PhD thesis, University of Liverpool.

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2012) Thermal laser micro-adjustment using ultra-short pulses. In: 37th international MATADOR conference, 25th-27th July 2012, Manchester, UK.

Sheikholeslami, Ghazal and Griffiths, Jonathan David and Edwardson, Stuart and Watkins, Ken and Dearden, Geoff (2013) Laser forming of ERW steel square tubes within metallurgical constraints. Key Engineering Materials, 549 . ISSN 1013-9826

Laser Materials Processing

Griffiths, Jonathan David (2012) Modelling of laser forming at macro and micro scales. PhD thesis, University of Liverpool.

Liquid Chemistry

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Localized NNMs

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2007) Localization of energy in a perfectly symmetric bladed disk assembly due to nonlinearities. ASME Proceedings | Advances in Aerospace Technology, 1 . pp. 229-237. ISSN UNSPECIFIED

MEMS

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Short pulse thermal laser microforming technique. In: IWOTE'11 International Workshop on Thermal Forming and Welding Distortion, 6th-7th April 2011, Bremen, DE.

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2012) Thermal laser micro-adjustment using ultra-short pulses. In: 37th international MATADOR conference, 25th-27th July 2012, Manchester, UK.

Marine turbines

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

Micro-adjustment

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2012) Thermal laser micro-adjustment using ultra-short pulses. In: 37th international MATADOR conference, 25th-27th July 2012, Manchester, UK.

Modal analysis

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2011) Mode shapes variation of a composite beam with piezoelectric patches. Transaction of Aviation Institute / Prace- Instytut Lotnictwa , 218 . pp. 36-43. ISSN 0509-6669

Multi-scaled analysis

Panagopoulos, Panayotis and Georgiades, Fotios and Tsakirtzis, Stylianos and Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683

NNMs

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2012) Nonlinear modal analysis of an L-shape beam structure. In: 4th International Conference on Localization, Energy Transfer and Nonlinear Normal Modes in Mechanics and Physics - NNM2012, July 1-5, 2012, Haifa. (Unpublished)

Peeters, Maxime and Georgiades, Fotios and Viguie, Regis and Serandour , G. and Kerschen, Gaetan and Golinval, Jean-Claude (2008) Development of numerical algorithms for practical computation of nonlinear normal modes. In: ISMA 2008 International Conference on Noise and Vibration Engineering, 15-17 SEptember 2008, Leuven, Belgium.

Non-linear resonance

Georgiades, Fotios and Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462

Non-linear targeted energy pumping

Georgiades, Fotios and Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462

Nonlinear Modal Analysis

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2008) Nonlinear modal analysis and energy localization in a bladed disk assembly. ASME Proceedings | Structures and Dynamics, 5 . pp. 593-600. ISSN UNSPECIFIED

Nonlinear damped transitions

Panagopoulos, Panayotis and Georgiades, Fotios and Tsakirtzis, Stylianos and Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683

Nonlinear equations of motion

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2012) Nonlinear modal analysis of an L-shape beam structure. In: 4th International Conference on Localization, Energy Transfer and Nonlinear Normal Modes in Mechanics and Physics - NNM2012, July 1-5, 2012, Haifa. (Unpublished)

Nonlinear modal analysis

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2012) Nonlinear modal analysis of an L-shape beam structure. In: 4th International Conference on Localization, Energy Transfer and Nonlinear Normal Modes in Mechanics and Physics - NNM2012, July 1-5, 2012, Haifa. (Unpublished)

Nonlinear targeted energy transfer

Georgiades, Fotios and Vakakis, Alexander, F. (2007) Dynamics of a linear beam with an attached local nonlinear energy sink. Communications in Nonlinear Science and Numerical Simulation, 12 (5). pp. 643-651. ISSN 1007-5704

Nonlinear targeted energy transfers

Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683

Open Thin Film

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Open Thin Film Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Plume Distortion

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Power coefficient

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

Pulsed lasers

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

Quality

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Reynolds stress anisotropy

Tedds, S. C. and Owen, Ieuan and Poole, R. J. (2014) Near-wake characteristics of a model horizontal axis tidal stream turbine. Renewable Energy, 63 . pp. 222-235. ISSN 0960-1481

Rotating structures

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica . ISSN 0025-6455

Scaling

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

TGM

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

Temperature Gradient Mechanism (TGM)

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2012) Thermal laser micro-adjustment using ultra-short pulses. In: 37th international MATADOR conference, 25th-27th July 2012, Manchester, UK.

Thin Film Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Thrust coefficient

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

Timoshenko beam model

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica . ISSN 0025-6455

Topography

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Torque coefficient

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

Velocity profile

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

Vibrations of composite beam

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica . ISSN 0025-6455

Warping

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica . ISSN 0025-6455

active delta wings

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

aerodynamic loads

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

airwake

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

bmjdoid

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

bmjolf

Jiang, Zheng and Matamoros-Sanchez, Alejandra Z and Zolotas, Argyrios and Goodall, Roger and Smith, Malcolm (2013) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 0954-4097

combustion

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

convection

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

debris control

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

dual-fuel

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

dynamic interface

Kaaria, Christopher H. and Wang, Yaxing and White, Mark D. and Owen, Ieuan (2013) An experimental technique for evaluating the aerodynamic impact of ship superstructures on helicopter operations. Ocean Engineering, 61 . pp. 97-108. ISSN 0029-8018

elastic continua dynamics

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270

engine modeling

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

engineering

Lawrence, Jonathan and Waugh, David and Dowding, Colin and Griffiths, Jonathan David (2012) University’s lasers group solves industry issues. The Lincolnite . ISSN UNSPECIFIED

excitation of NNMs

Georgiades, Fotios and Warminski, Jerzy (2011) Excitation of a localized nonlinear normal mode of a bladed disk assembly lump mass nonlinear model. Transactions of Aviation Institute / Prace- Instytut Lotnictwa, 218 (12). pp. 28-35. ISSN 0509-6669

fin stack

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

finite element modelling

Griffiths, Jonathan David and Edwardson, Stuart and Boegelein, Thomas and Dearden, Geoff and Watkins, Ken (2011) The effect of graphite burn off on multi pass laser forming. In: International Workshop on Thermal Forming and Welding Distortion, 6th-7th April 2011, Bremen, DE.

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Modelling of real temporally variant beam shapes in laser materials processing. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

finite elements

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2005) Using virtual tests to improve footwear design development. In: The impact of technology on sport. Hunkosha Co Ltd, Japan, pp. 86-91. ISBN UNSPECIFIED

finite-element analysis

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2006) Virtual modelling of a prosthetic foot to improve footwear testing. Journal of Materials: Design and Applications, 220 (L4). pp. 207-213. ISSN 1464-4207

footwear

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2005) Using virtual tests to improve footwear design development. In: The impact of technology on sport. Hunkosha Co Ltd, Japan, pp. 86-91. ISBN UNSPECIFIED

footwear testing

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2006) Virtual modelling of a prosthetic foot to improve footwear testing. Journal of Materials: Design and Applications, 220 (L4). pp. 207-213. ISSN 1464-4207

heat pipes

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

heat sink

Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310

heat transfer enhancement

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

helicopter loads

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

inerter

Jiang, Zheng and Matamoros-Sanchez, Alejandra Z and Zolotas, Argyrios and Goodall, Roger and Smith, Malcolm (2013) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 0954-4097

laser

Lawrence, Jonathan and Waugh, David and Dowding, Colin and Griffiths, Jonathan David (2012) University’s lasers group solves industry issues. The Lincolnite . ISSN UNSPECIFIED

laser materials processing

Griffiths, Jonathan David and Edwardson, Stuart and Boegelein, Thomas and Dearden, Geoff and Watkins, Ken (2011) The effect of graphite burn off on multi pass laser forming. In: International Workshop on Thermal Forming and Welding Distortion, 6th-7th April 2011, Bremen, DE.

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Modelling of real temporally variant beam shapes in laser materials processing. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

linear equations of motion

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413

marine current turbines

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

maritime helicopter

Kaaria, Christopher H. and Wang, Yaxing and White, Mark D. and Owen, Ieuan (2013) An experimental technique for evaluating the aerodynamic impact of ship superstructures on helicopter operations. Ocean Engineering, 61 . pp. 97-108. ISSN 0029-8018

modal analysis

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2009) Modal analysis of a nonlinear periodic structure with cyclic symmetry. AIAA, 47 (4). pp. 1014-1025. ISSN 0001-1452

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270

near-wake

Tedds, S. C. and Owen, Ieuan and Poole, R. J. (2014) Near-wake characteristics of a model horizontal axis tidal stream turbine. Renewable Energy, 63 . pp. 222-235. ISSN 0960-1481

nonlinear modal interactions

Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683

oapaid

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica . ISSN 0025-6455

passive network

Jiang, Zheng and Matamoros-Sanchez, Alejandra Z and Zolotas, Argyrios and Goodall, Roger and Smith, Malcolm (2013) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 0954-4097

photonics

Lawrence, Jonathan and Waugh, David and Dowding, Colin and Griffiths, Jonathan David (2012) University’s lasers group solves industry issues. The Lincolnite . ISSN UNSPECIFIED

pilot workload

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

prosthetic foot

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2006) Virtual modelling of a prosthetic foot to improve footwear testing. Journal of Materials: Design and Applications, 220 (L4). pp. 207-213. ISSN 1464-4207

railway vehicle

Jiang, Zheng and Matamoros-Sanchez, Alejandra Z and Zolotas, Argyrios and Goodall, Roger and Smith, Malcolm (2013) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 0954-4097

rapid prototyping

Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310

ride quality

Jiang, Zheng and Matamoros-Sanchez, Alejandra Z and Zolotas, Argyrios and Goodall, Roger and Smith, Malcolm (2013) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 0954-4097

scoustic doppler velocimeter

Tedds, S. C. and Owen, Ieuan and Poole, R. J. (2014) Near-wake characteristics of a model horizontal axis tidal stream turbine. Renewable Energy, 63 . pp. 222-235. ISSN 0960-1481

selective laser melting

Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310

ship airwake

Kaaria, Christopher H. and Wang, Yaxing and White, Mark D. and Owen, Ieuan (2013) An experimental technique for evaluating the aerodynamic impact of ship superstructures on helicopter operations. Ocean Engineering, 61 . pp. 97-108. ISSN 0029-8018

ship design

Kaaria, Christopher H. and Wang, Yaxing and White, Mark D. and Owen, Ieuan (2013) An experimental technique for evaluating the aerodynamic impact of ship superstructures on helicopter operations. Ocean Engineering, 61 . pp. 97-108. ISSN 0029-8018

shock isolation

Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683

Georgiadis, Fotios and Vakakis, Alexander, F. and McFarland, Michael, D. and Bergman , Lawrence (2005) Shock isolation through passive energy pumping caused by nonsmooth nonlinearities. International Journal of Bifurcation and Chaos, 15 (6). pp. 1989-2001. ISSN 0218-1274

Georgiadis, Fotios and Vakakis, Alexander, F. and McFarland, Michael, D. and Bergman , Lawrence (2003) Shock isolation through passive energy pumping in a system with piecewise linear stiffnesses. In: 19th Biennial Conference on Mechanical Vibration and Noise, 2 - 6 September 2003, Chicago, Ill..

Karayannis, Yannis and Vakakis, Alexander, F. and Georgiades, Fotios (2008) Vibro-impact attachments as shock absorbers. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (10). pp. 1899-1908. ISSN 0954-4062

tidal energy

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

tidal stream turbines

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

Tedds, S. C. and Owen, Ieuan and Poole, R. J. (2014) Near-wake characteristics of a model horizontal axis tidal stream turbine. Renewable Energy, 63 . pp. 222-235. ISSN 0960-1481

train suspension

Jiang, Zheng and Matamoros-Sanchez, Alejandra Z and Zolotas, Argyrios and Goodall, Roger and Smith, Malcolm (2013) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit . ISSN 0954-4097

turbulence statistics

Tedds, S. C. and Owen, Ieuan and Poole, R. J. (2014) Near-wake characteristics of a model horizontal axis tidal stream turbine. Renewable Energy, 63 . pp. 222-235. ISSN 0960-1481

validation

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2006) Virtual modelling of a prosthetic foot to improve footwear testing. Journal of Materials: Design and Applications, 220 (L4). pp. 207-213. ISSN 1464-4207

vibro-impact oscillators

Karayannis, Yannis and Vakakis, Alexander, F. and Georgiades, Fotios (2008) Vibro-impact attachments as shock absorbers. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (10). pp. 1899-1908. ISSN 0954-4062

virtual testing

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2005) Using virtual tests to improve footwear design development. In: The impact of technology on sport. Hunkosha Co Ltd, Japan, pp. 86-91. ISBN UNSPECIFIED

vortex generators

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

water tunnel tests

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

This list was generated on Mon Oct 20 23:32:33 2014 BST.