Items where Subject is "H Engineering > H300 Mechanical Engineering"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Jump to: A | D | G | K | L | M | P | S | T | W
Number of items at this level: 41.

A

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

D

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

G

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2014) Equations of motion of rotating composite beam with a nonconstant rotation speed and an arbitrary preset angle. Meccanica . ISSN 0025-6455

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2011) Mode shapes variation of a composite beam with piezoelectric patches. Transaction of Aviation Institute / Prace- Instytut Lotnictwa , 218 . pp. 36-43. ISSN 0509-6669

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2007) Localization of energy in a perfectly symmetric bladed disk assembly due to nonlinearities. ASME Proceedings | Advances in Aerospace Technology, 1 . pp. 229-237. ISSN UNSPECIFIED

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2009) Modal analysis of a nonlinear periodic structure with cyclic symmetry. AIAA, 47 (4). pp. 1014-1025. ISSN 0001-1452

Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2008) Nonlinear modal analysis and energy localization in a bladed disk assembly. ASME Proceedings | Structures and Dynamics, 5 . pp. 593-600. ISSN UNSPECIFIED

Georgiades, Fotios and Vakakis, Alexander, F. (2007) Dynamics of a linear beam with an attached local nonlinear energy sink. Communications in Nonlinear Science and Numerical Simulation, 12 (5). pp. 643-651. ISSN 1007-5704

Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683

Georgiades, Fotios and Vakakis, Alexander, F. and Kerschen, Gaetan (2007) Broadband passive targeted energy pumping from a linear dispersive rod to a lightweight essentially non-linear end attachment. International Journal of Non-Linear Mechanics, 42 (5). pp. 773-788. ISSN 0020-7462

Georgiades, Fotios and Warminski, Jerzy (2011) Excitation of a localized nonlinear normal mode of a bladed disk assembly lump mass nonlinear model. Transactions of Aviation Institute / Prace- Instytut Lotnictwa, 218 (12). pp. 28-35. ISSN 0509-6669

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Mathhew, P. (2013) Towards linear modal analysis for an L-shaped beam: equations of motion. Mechanics Research Communications, 47 . pp. 50-60. ISSN 0093-6413

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2013) Linear modal analysis of L-shaped beam structures. Mechanical Systems and Signal Processing, 38 (2). pp. 312-332. ISSN 0888-3270

Georgiades, Fotios and Warminski, Jerzy and Cartmell, Matthew, P. (2012) Nonlinear modal analysis of an L-shape beam structure. In: 4th International Conference on Localization, Energy Transfer and Nonlinear Normal Modes in Mechanics and Physics - NNM2012, July 1-5, 2012, Haifa. (Unpublished)

Georgiades, Fotios and Warminski, Jerzy and Cartmell , Matthew (2012) Linear modal analysis of L-shaped beam structures: parametric studies. Journal of Physics: Conference Series, 382 (1). p. 2006. ISSN 1742-6588

Georgiadis, Fotios and Vakakis, Alexander, F. and McFarland, Michael, D. and Bergman , Lawrence (2005) Shock isolation through passive energy pumping caused by nonsmooth nonlinearities. International Journal of Bifurcation and Chaos, 15 (6). pp. 1989-2001. ISSN 0218-1274

Georgiadis, Fotios and Vakakis, Alexander, F. and McFarland, Michael, D. and Bergman , Lawrence (2003) Shock isolation through passive energy pumping in a system with piecewise linear stiffnesses. In: 19th Biennial Conference on Mechanical Vibration and Noise, 2 - 6 September 2003, Chicago, Ill..

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

K

Kaaria, Christopher H. and Wang, Yaxing and White, Mark D. and Owen, Ieuan (2013) An experimental technique for evaluating the aerodynamic impact of ship superstructures on helicopter operations. Ocean Engineering, 61 . pp. 97-108. ISSN 0029-8018

Karayannis, Yannis and Vakakis, Alexander, F. and Georgiades, Fotios (2008) Vibro-impact attachments as shock absorbers. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 222 (10). pp. 1899-1908. ISSN 0954-4062

L

Latalski, Jaroslaw and Georgiades, Fotios and Warminski, Jerzy (2012) Rational placement of a macro fibre composite actuator in composite rotating beams. Journal of Physics: Conference Series, 382 (1). p. 2021. ISSN 1742-6588

Lawrence, Jonathan and Waugh, David and Dowding, Colin and Griffiths, Jonathan David (2012) University’s lasers group solves industry issues. The Lincolnite . ISSN UNSPECIFIED

M

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2005) Using virtual tests to improve footwear design development. In: The impact of technology on sport. Hunkosha Co Ltd, Japan, pp. 86-91. ISBN UNSPECIFIED

Mara, Gillian and Harland, A.R. and Mitchell, S.R. (2006) Virtual modelling of a prosthetic foot to improve footwear testing. Journal of Materials: Design and Applications, 220 (L4). pp. 207-213. ISSN 1464-4207

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

P

Panagopoulos, Panayotis and Georgiades, Fotios and Tsakirtzis, Stylianos and Vakakis, Alexander, F. and Bergman, Lawrence, A. (2007) Multi-scaled analysis of the damped dynamics of an elastic rod with an essentially nonlinear end attachment. International Journal of Solids and Structures, 44 (18-19). pp. 6256-6278. ISSN 0020-7683

Peeters, Maxime and Georgiades, Fotios and Viguie, Regis and Serandour , G. and Kerschen, Gaetan and Golinval, Jean-Claude (2008) Development of numerical algorithms for practical computation of nonlinear normal modes. In: ISMA 2008 International Conference on Noise and Vibration Engineering, 15-17 SEptember 2008, Leuven, Belgium.

S

Sheikholeslami, Ghazal and Griffiths, Jonathan David and Edwardson, Stuart and Watkins, Ken and Dearden, Geoff (2013) Laser forming of ERW steel square tubes within metallurgical constraints. Key Engineering Materials, 549 . ISSN 1013-9826

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

T

Tedds, S. C. and Owen, Ieuan and Poole, R. J. (2014) Near-wake characteristics of a model horizontal axis tidal stream turbine. Renewable Energy, 63 . pp. 222-235. ISSN 0960-1481

W

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310

This list was generated on Fri Aug 1 12:31:17 2014 BST.