Items where Subject is "H150 Engineering Design"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
1D 3D Printing 3D Prototyping Acoustic comfort Actuators Additive Manufacturing CFD Control Systems Countermeasures Coworking Deep space missions Design Design management Design process Design strategies Engineering Evolutionary Algorithm FPGA Grid topology sensitivity Habitability Hardware in the Loop Human behaviour and performance Hybrid Bond Graph Innovative furniture system Integration Intelligent Systems JCOpen LQG Manufacturing Manufacturing Systems Mechatronics Modeling Systems Monotony and isolation Motor industry Multi-disciplinary Multi-objective Optimisation Multi-physics Multiobjective Optimisation NotOAChecked Product development Production Systems QFT method Rapid Prototyping Robust control Robustness Shape Optimisation Smart material State estimation Stress-blended eddy simulation Stress-blended eddy simulation; Vertical axis wind turbine; Gurney flap; Delayed flow separation. Suppliers Switched Bond Graph Turbochager Virtual Reality aerofoil aircraft analytical methods blade trailling edge bond graph bond-graph computational fluid dynamics control controlled element controlled junction design chain detached eddy dimpling downforce drag reduction dynamic causality fillm cooling hybrid idealised physical modelling innovation low tip speed ratio main shaft wake effect on power generation mathematical modeling mixed-Boolean modeling motorsport performance power electronics product design product development sensor selection soft grippers state space supply chain innovation vertical axis wind turbine vortex-induced flow separation wind tunnel
Number of items at this level: 102.

1D

Okhuahesogie, Famous, Stewart, Jill, Riley, Mike, Heyes, Frank and Roach, Paul (2014) A 1-D analytical code for the design and multi-objective optimisation of high-pressure compressors within two-stage turbochargers for marine applications. In: 11th International Conference on Turbochargers and Turbocharging, 13-14 May 2014, London.

3D Printing

Di Nicolantonio, Massimo, Rossi, Emilio and Alexander, Thomas (2020) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA. Advances in Intelligent Systems and Computing, 975 (1). Springer, Cham. ISBN 978-3-030-20215-6, 978-3-030-20216-3

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

3D Prototyping

Di Nicolantonio, Massimo, Rossi, Emilio and Alexander, Thomas (2020) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA. Advances in Intelligent Systems and Computing, 975 (1). Springer, Cham. ISBN 978-3-030-20215-6, 978-3-030-20216-3

Acoustic comfort

Geniola, Viola, Camplone, Stefania, Marano, Antonio and Rossi, Emilio (2020) Design of an Innovative Furniture System: Improving Acoustic Comfort in Coworking Workplaces. In: 3rd International Conference on Intelligent Human Systems Integration (IHSI 2020), 2020.

Actuators

Nandakumar, R., Zolotas, A. C. and Halikias, G. D. (2007) Design of optimal robust fixed-structure controllers using the quantitative feedback theory approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (4). pp. 697-716. ISSN 0959-6518

Additive Manufacturing

Di Nicolantonio, Massimo, Rossi, Emilio and Alexander, Thomas (2020) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA. Advances in Intelligent Systems and Computing, 975 (1). Springer, Cham. ISBN 978-3-030-20215-6, 978-3-030-20216-3

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

CFD

Allarton, Richard, Yao, Jun, Clifford, Tyler, Hitchborn, Benjamin, Parker, Liam J and Shaw, Joshua (2020) Surface flow modification of aerofoils for automotive racing car applications. International Journal of Modern Physics B, 34 (14n16). p. 2040096. ISSN 0217-9792

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

Control Systems

Nandakumar, R., Zolotas, A. C. and Halikias, G. D. (2007) Design of optimal robust fixed-structure controllers using the quantitative feedback theory approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (4). pp. 697-716. ISSN 0959-6518

Countermeasures

Peldszus, Regina, Dalke, Hilary, Pretlove, Stephen and Welch, Chris (2014) The perfect boring situation: addressing the experience of monotony during crewed deep space missions through habitability design. Acta Astronautica, 94 (1). pp. 262-276. ISSN 0094-5765

Coworking

Geniola, Viola, Camplone, Stefania, Marano, Antonio and Rossi, Emilio (2020) Design of an Innovative Furniture System: Improving Acoustic Comfort in Coworking Workplaces. In: 3rd International Conference on Intelligent Human Systems Integration (IHSI 2020), 2020.

Deep space missions

Peldszus, Regina, Dalke, Hilary, Pretlove, Stephen and Welch, Chris (2014) The perfect boring situation: addressing the experience of monotony during crewed deep space missions through habitability design. Acta Astronautica, 94 (1). pp. 262-276. ISSN 0094-5765

Design

Di Nicolantonio, Massimo, Rossi, Emilio and Alexander, Thomas (2020) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA. Advances in Intelligent Systems and Computing, 975 (1). Springer, Cham. ISBN 978-3-030-20215-6, 978-3-030-20216-3

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

Twigg, David (2002) Managing the design/manufacturing interface across firms. Integrated Manufacturing Systems, 13 (4). pp. 212-221. ISSN 09576061

Design management

Twigg, David (1998) Managing product development within a design chain. International Journal of Operations & Production Management, 18 (5). pp. 508-524. ISSN 0144-3577

Design process

Geniola, Viola, Camplone, Stefania, Marano, Antonio and Rossi, Emilio (2020) Design of an Innovative Furniture System: Improving Acoustic Comfort in Coworking Workplaces. In: 3rd International Conference on Intelligent Human Systems Integration (IHSI 2020), 2020.

Design strategies

Peldszus, Regina, Dalke, Hilary, Pretlove, Stephen and Welch, Chris (2014) The perfect boring situation: addressing the experience of monotony during crewed deep space missions through habitability design. Acta Astronautica, 94 (1). pp. 262-276. ISSN 0094-5765

Engineering

Twigg, David (1998) Managing product development within a design chain. International Journal of Operations & Production Management, 18 (5). pp. 508-524. ISSN 0144-3577

Evolutionary Algorithm

Riley, Mike J. W., Peachey, Tom, Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

FPGA

Deliparaschos, Kyriakos, Michail, Konstantinos, Zolotas, Argyrios and Tzafestas, Spyridon (2016) FPGA-based efficient hardware/software co-design for industrial systems with systematic sensor selection. Journal of Electrical Engineering, 67 (3). pp. 150-159. ISSN 1335-3632

Grid topology sensitivity

Syawitri, Taurista Perdana, Yao, Yufeng, Yao, Jun and Chandra, Budi (2020) Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine. International Journal of Numerical Methods for Heat & Fluid Flow . ISSN 0961-5539

Habitability

Peldszus, Regina, Dalke, Hilary, Pretlove, Stephen and Welch, Chris (2014) The perfect boring situation: addressing the experience of monotony during crewed deep space missions through habitability design. Acta Astronautica, 94 (1). pp. 262-276. ISSN 0094-5765

Hardware in the Loop

Deliparaschos, Kyriakos, Michail, Konstantinos, Zolotas, Argyrios and Tzafestas, Spyridon (2016) FPGA-based efficient hardware/software co-design for industrial systems with systematic sensor selection. Journal of Electrical Engineering, 67 (3). pp. 150-159. ISSN 1335-3632

Human behaviour and performance

Peldszus, Regina, Dalke, Hilary, Pretlove, Stephen and Welch, Chris (2014) The perfect boring situation: addressing the experience of monotony during crewed deep space missions through habitability design. Acta Astronautica, 94 (1). pp. 262-276. ISSN 0094-5765

Hybrid Bond Graph

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

Innovative furniture system

Geniola, Viola, Camplone, Stefania, Marano, Antonio and Rossi, Emilio (2020) Design of an Innovative Furniture System: Improving Acoustic Comfort in Coworking Workplaces. In: 3rd International Conference on Intelligent Human Systems Integration (IHSI 2020), 2020.

Integration

Twigg, David (2002) Managing the design/manufacturing interface across firms. Integrated Manufacturing Systems, 13 (4). pp. 212-221. ISSN 09576061

Intelligent Systems

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

JCOpen

Deliparaschos, Kyriakos, Michail, Konstantinos, Zolotas, Argyrios and Tzafestas, Spyridon (2016) FPGA-based efficient hardware/software co-design for industrial systems with systematic sensor selection. Journal of Electrical Engineering, 67 (3). pp. 150-159. ISSN 1335-3632

LQG

Deliparaschos, Kyriakos, Michail, Konstantinos, Zolotas, Argyrios and Tzafestas, Spyridon (2016) FPGA-based efficient hardware/software co-design for industrial systems with systematic sensor selection. Journal of Electrical Engineering, 67 (3). pp. 150-159. ISSN 1335-3632

Manufacturing

Twigg, David (2002) Managing the design/manufacturing interface across firms. Integrated Manufacturing Systems, 13 (4). pp. 212-221. ISSN 09576061

Manufacturing Systems

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

Mechatronics

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

Modeling Systems

Di Nicolantonio, Massimo, Rossi, Emilio and Alexander, Thomas (2020) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA. Advances in Intelligent Systems and Computing, 975 (1). Springer, Cham. ISBN 978-3-030-20215-6, 978-3-030-20216-3

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

Monotony and isolation

Peldszus, Regina, Dalke, Hilary, Pretlove, Stephen and Welch, Chris (2014) The perfect boring situation: addressing the experience of monotony during crewed deep space missions through habitability design. Acta Astronautica, 94 (1). pp. 262-276. ISSN 0094-5765

Motor industry

Twigg, David (1998) Managing product development within a design chain. International Journal of Operations & Production Management, 18 (5). pp. 508-524. ISSN 0144-3577

Multi-disciplinary

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

Multi-objective Optimisation

Riley, Mike J. W., Peachey, Tom, Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

Multi-physics

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

Multiobjective Optimisation

Okhuahesogie, Famous, Stewart, Jill, Riley, Mike, Heyes, Frank and Roach, Paul (2014) A 1-D analytical code for the design and multi-objective optimisation of high-pressure compressors within two-stage turbochargers for marine applications. In: 11th International Conference on Turbochargers and Turbocharging, 13-14 May 2014, London.

NotOAChecked

Peldszus, Regina, Dalke, Hilary, Pretlove, Stephen and Welch, Chris (2014) The perfect boring situation: addressing the experience of monotony during crewed deep space missions through habitability design. Acta Astronautica, 94 (1). pp. 262-276. ISSN 0094-5765

Product development

Twigg, David (1998) Managing product development within a design chain. International Journal of Operations & Production Management, 18 (5). pp. 508-524. ISSN 0144-3577

Twigg, David (2002) Managing the design/manufacturing interface across firms. Integrated Manufacturing Systems, 13 (4). pp. 212-221. ISSN 09576061

Production Systems

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

QFT method

Nandakumar, R., Zolotas, A. C. and Halikias, G. D. (2007) Design of optimal robust fixed-structure controllers using the quantitative feedback theory approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (4). pp. 697-716. ISSN 0959-6518

Rapid Prototyping

Di Nicolantonio, Massimo, Rossi, Emilio and Alexander, Thomas (2020) Advances in Additive Manufacturing, Modeling Systems and 3D Prototyping: Proceedings of the AHFE 2019 International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 24-28, 2019, Washington D.C., USA. Advances in Intelligent Systems and Computing, 975 (1). Springer, Cham. ISBN 978-3-030-20215-6, 978-3-030-20216-3

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

Robust control

Deliparaschos, Kyriakos, Michail, Konstantinos, Zolotas, Argyrios and Tzafestas, Spyridon (2016) FPGA-based efficient hardware/software co-design for industrial systems with systematic sensor selection. Journal of Electrical Engineering, 67 (3). pp. 150-159. ISSN 1335-3632

Nandakumar, R., Zolotas, A. C. and Halikias, G. D. (2007) Design of optimal robust fixed-structure controllers using the quantitative feedback theory approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (4). pp. 697-716. ISSN 0959-6518

Robustness

Nandakumar, R., Zolotas, A. C. and Halikias, G. D. (2007) Design of optimal robust fixed-structure controllers using the quantitative feedback theory approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (4). pp. 697-716. ISSN 0959-6518

Shape Optimisation

Riley, Mike J. W., Peachey, Tom, Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

Smart material

Geniola, Viola, Camplone, Stefania, Marano, Antonio and Rossi, Emilio (2020) Design of an Innovative Furniture System: Improving Acoustic Comfort in Coworking Workplaces. In: 3rd International Conference on Intelligent Human Systems Integration (IHSI 2020), 2020.

State estimation

Deliparaschos, Kyriakos, Michail, Konstantinos, Zolotas, Argyrios and Tzafestas, Spyridon (2016) FPGA-based efficient hardware/software co-design for industrial systems with systematic sensor selection. Journal of Electrical Engineering, 67 (3). pp. 150-159. ISSN 1335-3632

Stress-blended eddy simulation

Syawitri, Taurista Perdana, Yao, Yufeng, Yao, Jun and Chandra, Budi (2020) Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine. International Journal of Numerical Methods for Heat & Fluid Flow . ISSN 0961-5539

Stress-blended eddy simulation; Vertical axis wind turbine; Gurney flap; Delayed flow separation.

Syawitri, Taurista Perdana, Yao, Yu-Feng, Yao, Jun and Chandra, Budi (2020) The effect of gurney flap on flow characteristics of vertical axis wind turbine. International Journal of Modern Physics B, 34 (14n16). p. 2040107. ISSN 0217-9792

Suppliers

Twigg, David (1998) Managing product development within a design chain. International Journal of Operations & Production Management, 18 (5). pp. 508-524. ISSN 0144-3577

Twigg, David (2002) Managing the design/manufacturing interface across firms. Integrated Manufacturing Systems, 13 (4). pp. 212-221. ISSN 09576061

Switched Bond Graph

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

Turbochager

Okhuahesogie, Famous, Stewart, Jill, Riley, Mike, Heyes, Frank and Roach, Paul (2014) A 1-D analytical code for the design and multi-objective optimisation of high-pressure compressors within two-stage turbochargers for marine applications. In: 11th International Conference on Turbochargers and Turbocharging, 13-14 May 2014, London.

Virtual Reality

Karwowski, Waldemar, Trzcielinski, Stefan, Mrugalska, Beata, Di Nicolantonio, Massimo and Rossi, Emilio (2019) Advances in Manufacturing, Production Management and Process Control: Joint proceedings of the AHFE 2018 International Conference on Advanced Production Management and Process Control, the AHFE International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Additive Manufacturing, Modeling Systems and 3D Prototyping, July 21-25, 2018, Loews Sapphire Falls Resort at Universal Studios, Orlando, Florida, USA. Advances in Intelligent Systems and Computing, 793 (1). Springer, Cham. ISBN 978-3-319-94195-0, 978-3-319-94196-7

aerofoil

Allarton, Richard, Yao, Jun, Clifford, Tyler, Hitchborn, Benjamin, Parker, Liam J and Shaw, Joshua (2020) Surface flow modification of aerofoils for automotive racing car applications. International Journal of Modern Physics B, 34 (14n16). p. 2040096. ISSN 0217-9792

aircraft

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

analytical methods

Okhuahesogie, Famous, Stewart, Jill, Riley, Mike, Heyes, Frank and Roach, Paul (2014) A 1-D analytical code for the design and multi-objective optimisation of high-pressure compressors within two-stage turbochargers for marine applications. In: 11th International Conference on Turbochargers and Turbocharging, 13-14 May 2014, London.

blade trailling edge

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

bond graph

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

bond-graph

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

computational fluid dynamics

Syawitria, T., Yao, Y.F., Chandra, B. and Yao, Jun (2019) CFD Simulation of Three-Straight-Bladed Vertical Axis Wind Turbine at Low Tip Speed Ratios. In: International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand, 4 - 5 October 2018, 4 - 5 October 2018, Thailand.

control

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

controlled element

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

controlled junction

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

design chain

Twigg, David (2015) Design chain. In: Wiley encyclopedia of management. Wiley, pp. 1-2. ISBN 9781118785317

detached eddy

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

dimpling

Allarton, Richard, Yao, Jun, Clifford, Tyler, Hitchborn, Benjamin, Parker, Liam J and Shaw, Joshua (2020) Surface flow modification of aerofoils for automotive racing car applications. International Journal of Modern Physics B, 34 (14n16). p. 2040096. ISSN 0217-9792

downforce

Allarton, Richard, Yao, Jun, Clifford, Tyler, Hitchborn, Benjamin, Parker, Liam J and Shaw, Joshua (2020) Surface flow modification of aerofoils for automotive racing car applications. International Journal of Modern Physics B, 34 (14n16). p. 2040096. ISSN 0217-9792

drag reduction

Allarton, Richard, Yao, Jun, Clifford, Tyler, Hitchborn, Benjamin, Parker, Liam J and Shaw, Joshua (2020) Surface flow modification of aerofoils for automotive racing car applications. International Journal of Modern Physics B, 34 (14n16). p. 2040096. ISSN 0217-9792

dynamic causality

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

fillm cooling

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

hybrid

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

idealised physical modelling

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

innovation

Twigg, David (2015) Design chain. In: Wiley encyclopedia of management. Wiley, pp. 1-2. ISBN 9781118785317

low tip speed ratio

Syawitria, T., Yao, Y.F., Chandra, B. and Yao, Jun (2019) CFD Simulation of Three-Straight-Bladed Vertical Axis Wind Turbine at Low Tip Speed Ratios. In: International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand, 4 - 5 October 2018, 4 - 5 October 2018, Thailand.

main shaft wake effect on power generation

Syawitria, T., Yao, Y.F., Chandra, B. and Yao, Jun (2019) CFD Simulation of Three-Straight-Bladed Vertical Axis Wind Turbine at Low Tip Speed Ratios. In: International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand, 4 - 5 October 2018, 4 - 5 October 2018, Thailand.

mathematical modeling

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

mixed-Boolean

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

modeling

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

motorsport

Allarton, Richard, Yao, Jun, Clifford, Tyler, Hitchborn, Benjamin, Parker, Liam J and Shaw, Joshua (2020) Surface flow modification of aerofoils for automotive racing car applications. International Journal of Modern Physics B, 34 (14n16). p. 2040096. ISSN 0217-9792

performance

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

power electronics

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

product design

Twigg, David (2015) Design chain. In: Wiley encyclopedia of management. Wiley, pp. 1-2. ISBN 9781118785317

product development

Twigg, David (2015) Design chain. In: Wiley encyclopedia of management. Wiley, pp. 1-2. ISBN 9781118785317

sensor selection

Deliparaschos, Kyriakos, Michail, Konstantinos, Zolotas, Argyrios and Tzafestas, Spyridon (2016) FPGA-based efficient hardware/software co-design for industrial systems with systematic sensor selection. Journal of Electrical Engineering, 67 (3). pp. 150-159. ISSN 1335-3632

soft grippers

Elgeneidy, Khaled and Goher, Khaled (2020) Structural Optimization of Adaptive Soft Fin Ray Fingers with Variable Stiffening Capability. In: IEEE RoboSoft 2020, USA.

state space

Margetts, Rebecca (2013) Modelling & analysis of hybrid dynamic systems using a bond graph approach. PhD thesis, University of Bath.

supply chain innovation

Twigg, David (2015) Design chain. In: Wiley encyclopedia of management. Wiley, pp. 1-2. ISBN 9781118785317

vertical axis wind turbine

Syawitri, Taurista Perdana, Yao, Yufeng, Yao, Jun and Chandra, Budi (2020) Assessment of stress-blended eddy simulation model for accurate performance prediction of vertical axis wind turbine. International Journal of Numerical Methods for Heat & Fluid Flow . ISSN 0961-5539

Syawitria, T., Yao, Y.F., Chandra, B. and Yao, Jun (2019) CFD Simulation of Three-Straight-Bladed Vertical Axis Wind Turbine at Low Tip Speed Ratios. In: International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand, 4 - 5 October 2018, 4 - 5 October 2018, Thailand.

vortex-induced flow separation

Syawitria, T., Yao, Y.F., Chandra, B. and Yao, Jun (2019) CFD Simulation of Three-Straight-Bladed Vertical Axis Wind Turbine at Low Tip Speed Ratios. In: International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand, 4 - 5 October 2018, 4 - 5 October 2018, Thailand.

wind tunnel

Allarton, Richard, Yao, Jun, Clifford, Tyler, Hitchborn, Benjamin, Parker, Liam J and Shaw, Joshua (2020) Surface flow modification of aerofoils for automotive racing car applications. International Journal of Modern Physics B, 34 (14n16). p. 2040096. ISSN 0217-9792

This list was generated on Fri Aug 14 07:03:57 2020 BST.