Items where Subject is "H141 Fluid Mechanics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Number of items at this level: 99.

Article

Al-Ansari, A. D. and Owen, I. (1999) Thermal and hydrodynamic analysis of the condensation and evaporation processes in horizontal tube desalination plant. International Journal of Heat and Mass Transfer, 42 (9). pp. 1633-1644. ISSN 0017-9310

Al-Azzawi, H. K. and Owen, I. (1984) Measuring the thermal conducitivity of uranin. International Journal of Heat and Fluid Flow, 5 (1). pp. 57-59. ISSN 0142-727X

Amini, A. and Owen, I. (1995) The use of critical flow venturi nozzles with saturated wet steam. Flow Measurement and Instrumentation, 6 (1). pp. 41-47. ISSN 0955-5986

Arifin, R. R., James, S. C., de Alwis Pitts, D. A., Hamlet, A. F., Sharma, A. and Fernando, H. J. S. (2016) Simulating the thermal behavior in Lake Ontario using EFDC. Journal of Great Lakes Research, 42 (3). pp. 511-523. ISSN 0380-1330

Aris, M. S., Owen, I. and Sutcliffe, C. J. (2011) The development of active vortex generators from shape memory alloys for the convective cooling of heated surfaces. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3566-3574. ISSN 0017-9310

Berdalet, Elisa, Peters, Francesc, Koumandou, V. Lila, Roldan, Cristina, Guadayol, Oscar and Estrada, Marta (2007) Species-specific physiological response of dinoflagellates to quantified small-scale turbulence. Journal of Phycology, 43 (5). pp. 965-977. ISSN 0022-3646

Boretti, Alberto, Jin, Seong-Ho, Brear, Michael, Zakis, George, Watson, Harry and Brewster, Simon (2008) Experimental and numerical study of a spark ignition engine with air-assisted direct injection. Proceedings of the IMechE, Part D: Automobile Engineering, 222 (6). pp. 1103-1119. ISSN 0954-4070

Buyruk, E., Barrow, H. and Owen, I. (1999) Heat transfer in laminar flow in a concentric annulus with peripherally varying heat transfer. International Journal of Heat and Mass Transfer, 42 (3). pp. 487-496. ISSN 0017-9310

Buyruk, E., Johnson, M. W. and Owen, I. (1998) Numerical and experimental study of flow and heat transfer around a tube in cross-flow at low Reynolds number. International Journal of Heat and Fluid Flow, 19 (3). pp. 223-232. ISSN 0142-727X

Castagna, Jony, Yao, Yufeng and Yao, Jun (2014) Direct numerical simulation of a turbulent flow over an axisymmetric hill. Computers & Fluids, 95 . pp. 116-126. ISSN 0045-7930

Davis, I. S., Shachar-Hill, B., Curry, M. R., Kim, K. S., Pedley, T. J. and Hill, A. E. (2007) Osmosis in semi-permeable pores: an examination of the basic flow equations based on an experimental and molecular dynamics study. Proceeding of the Royal Society (A): Mathematical, Physical & Engineering Sciences, 463 (2079). pp. 881-896. ISSN 1471-2946

Effendy, M., Yao, Y., Yao, J. and Marchant, D. (2016) DES study of blade trailing edge cutback cooling performance with various lip-thicknesses. Applied Thermal Engineering, 99 . pp. 434-445. ISSN 1359-4311

Elgeneidy, Khaled, Al-Yacoub, Ali, Usman, Zahid, Lohsa, Niels, jackson, Michael and Wright, Iain (2018) Towards an automated masking process: A model-based approach. Journal of Engineering Manufacture . ISSN 0954-4054

Ellington, Charles P., Van Den Berg, Coen, Willmott, Alexander P. and Thomas, Adrian L. R. (1996) Leading-edge vortices in insect flight. Nature, 384 . pp. 626-630. ISSN 0028-0836

Fyrippi, I., Owen, I. and Escudier, M. P. (2004) Flowmetering of non-Newtonian liquids. Flow Measurement and Instrumentation, 15 (3). pp. 131-138. ISSN 0955-5986

Guadayol, Oscar, Peters, Francesc, Stiansen, Jan Erik, Marrase, Celia and Lohrmann, Atle (2009) Evaluation of oscillating grids and orbital shakers as means to generate isotropic and homogeneous small-scale turbulence in laboratory enclosures commonly used in plankton studies. Limnology and Oceanography: Methods, 7 (4). pp. 287-303. ISSN 1541-5856

Hield, Peter, Brear, Michael and Jin, Seong-Ho (2009) Thermoacoustic limit cycles in a premixed laboratory combustor with open and choked exits. Combustion and Flame, 156 (9). pp. 1683-1697. ISSN 0010-2180

Hoath, Stephen D., Castrejón-Pita, José Rafael, Hsiao, Wen-Kai, Jung, Sungjune, Martin, Graham D., Hutchings, Ian M., Tuladhar, Tri R., Vadillo, Damien C., Butler, Simon A., Mackley, Malcolm R., McIlroy, Claire, Morrison, Neil F., Harlen, Oliver G. and Yow, Huai Nyin (Grace) (2013) Jetting of Complex Fluids. Journal of Imaging Science and Technology, 57 (4). pp. 1-10. ISSN 1062-3701

Hoath, Stephen D., Vadillo, Damien C., Harlen, Oliver G., McIlroy, Claire, Morrison, Neil F., Hsiao, Wen-Kai, Tuladhar, Tri R., Jung, Sungjune, Martin, Graham D. and Hutchings, Ian M. (2014) Inkjet printing of weakly elastic polymer solutions. Journal of Non-Newtonian Fluid Mechanics, 205 . pp. 1-10. ISSN 0377-0257

Horikiri, Kana, Yao, Yufeng and Yao, Jun (2015) Numerical optimisation of thermal comfort improvement for indoor environment with occupants and furniture. Energy and Buildings, 88 . pp. 303-315. ISSN 0378-7788

Horikiri, Kana, Yao, Yufeng and Yao, Jun (2011) Numerical simulation of convective airflow in an empty room. International Journal of Energy and Environment, 5 (1). pp. 574-581. ISSN 1109-9577

Horikiria, Kana, Yao, Yufeng and Yao, Jun (2014) Modelling conjugate flow and heat transfer in a ventilated room for indoor thermal comfort assessment. Building and Environment, 77 . pp. 135-147. ISSN 0360-1323

Hussein, I. B., Owen, I. and Amini, A. M. (1992) Energy metering system for high quality saturated steam. Flow Measurement and Instrumentation, 3 (4). pp. 235-240. ISSN 0955-5986

Hussein, I.B. and Owen, I. (1991) Calibration of flowmeters in superheated and wet steam. Flow Measurement and Instrumentation, 2 (4). pp. 209-215. ISSN 0955-5986

Karimi, Nader, Brear, Michael, Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180

Madadnia, J. and Owen, I. (1995) Erosion in conical diffusers in particulate-laden cavitating flow. International Journal of Multiphase Flow, 21 (6). pp. 1253-1257. ISSN 0301-9322

Marmiroli, Benedetta, Grenci, Gianluca, Cacho-Nerin, Fernando, Sartori, Barbara, Ferrari, Enrico, Laggner, Peter, Businaro, Luca and Amenitsch, Heinz (2009) Free jet micromixer to study fast chemical reactions by small angle X-ray scattering. Lab on a Chip, 9 (14). pp. 2063-2069. ISSN 1473-0197

Masalo, Ingrid, Guadayol, Oscar, Peters, Francese and Oca, Joan (2008) Analysis of sedimentation and resuspension processes of aquaculture biosolids using an oscillating grid. Aquacultural Engineering, 38 (2). pp. 135-144. ISSN 0144-8609

Mathues, Wouter, Formenti, Susanna, McIlroy, Claire, Harlen, Oliver G. and Clasen, Christian (2018) CaBER vs ROJER—Different time scales for the thinning of a weakly elastic jet. Journal of Rheology, 62 (5). pp. 1135-1153. ISSN 0148-6055

Mathues, Wouter, McIlroy, Claire, Harlen, Oliver G. and Clasen, Christian (2015) Capillary breakup of suspensions near pinch-off. Physics of Fluids, 27 (9). 093301. ISSN 1070-6631

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids . ISSN 1070-6631

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

McIlroy, Claire and Harlen, Oliver G. (2019) Effects of drive amplitude on continuous jet break-up. Physics of Fluids, 31 (6). 064104. ISSN 1070-6631

McIlroy, Claire and Harlen, Oliver G. (2014) Modelling capillary break-up of particulate suspensions. Physics of Fluids, 26 (3). 033101. ISSN 1070-6631

Motamed-Amini, A. and Owen, I. (1987) The expansion of wet steam through a compressible confined vortex in a fluidic vortex diode. International Journal of Multiphase Flow, 13 (6). pp. 845-856. ISSN 0301-9322

Owen, I., Abdul-Ghani, A. and Amini, A. M. (1992) Diffusing a homogenized two-phase flow. International Journal of Multiphase Flow, 18 (4). pp. 531-540. ISSN 0301-9322

Owen, I., El-Kady, A. A. and Cleaver, J. W. (1986) A note comparing the rates of deposition of submicron particles with the rates of heat transfer for ribbed surfaces exposed to turbulent gas streams. Journal of Aerosol Science, 17 (2). pp. 145-148. ISSN 0021-8502

Owen, I. and Hussein, I. B. (1991) Wet steam flowmeter correction factors. Flow Measurement and Instrumentation, 2 (2). pp. 139-140. ISSN 0955-5986

Owen, I. and Hussein, I. B. (1994) The propulsion of an isolated slug through a pipe and the forces produced as it impacts upon an orifice plate. International Journal of Multiphase Flow, 20 (3). pp. 659-666. ISSN 0301-9322

Owen, I., Hussein, I. B. and Amini, A. M. (1991) The impact of water slugs on wet steam flowmeters. Flow Measurement and Instrumentation, 2 (2). pp. 98-104. ISSN 0955-5986

Owen, I. and Jalil, J. M. (1991) Heterogeneous flashing in water drops. International Journal of Multiphase Flow, 17 (5). pp. 653-660. ISSN 0301-9322

Owen, I. and Ryley, D. J. (1985) The flow of thin liquid films around corners. International Journal of Multiphase Flow, 11 (1). pp. 51-62. ISSN 0301-9322

Rahimi, M., Owen, I. and Mistry, J. (2003) Heat transfer between an under-expanded jet and a cylindrical surface. International Journal of Heat and Mass Transfer, 46 (17). pp. 3135-3142. ISSN 00179310

Rahimi, M., Owen, I. and Mistry, J. (2003) Impingement heat transfer in an under-expanded axisymmetric air jet. International Journal of Heat and Mass Transfer, 46 (2). pp. 263-272. ISSN 0017-9310

Staicu, Adrian, Vorselaars, Bart and van de Water, Willem (2003) Turbulence anisotropy and the SO(3) description. Physical Review E, 68 (4). ISSN 1539-3755

Wilkinson, J., Motamed-Amini, A. and Owen, I. (1988) Compressible and confined vortex flow. International Journal of Heat and Fluid Flow, 9 (4). pp. 373-380. ISSN 0142-727X

Wong, M., Owen, I., Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310

Yao, Jun and Yao, Yufeng (2012) CFD prediction and experimental measurement of blade water coverage in a diesel turbocharger. Modelling and Simulation in Engineering, 2012 . p. 11. ISSN 1687-5591

Yao, Jun, Yufeng, Yao, Arini, Antonino and Gordon, Timothy (2016) Modelling air and water two-phase annular flow in a small horizontal pipe. International Journal of Modern Physics: Conference Series, 42 . pp. 1660158-1. ISSN 2010-1945

Yao, Y., Petty, D., Barrington, P., Yao, J. and Mason, P. (2007) Direct numerical simulation of jets in cross-flow. International Journal of Computational Fluid Dynamics, 20 (5). pp. 279-286. ISSN 1061-8562

Yao, Yufeng, Effendy, Marwan, Yao, Jun and Marchant, Denis (2019) DETACHED EDDY SIMULATION OF BLADE TRAILING-EDGE CUTBACK COOLING PERFORMANCE AT VARIOUS EJECTION SLOT ANGLES. International Journal of Heat and Fluid Flow, 80 (108487). ISSN 0142-727X

Yao, Yufeng, Maidi, Mohamad and Yao, Jun (2012) Effect of jet inclination angle and hole exit shape on vortical flow structures in low-Reynolds number jet in cross-flow. Modelling and Simulation in Engineering, 2012 (632040). 7 pages. ISSN 1687-5591

Book Section

Maidi, M., Yao, Y. and Yao, Jun (2009) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: New trends in fluid mechanics research. Springer, pp. 416-419. ISBN 3540759948

Meyer, Terrence, Brear, Michael, Jin, Seong-Ho and Gord, James (2010) Formation and diagnostics of sprays in combustion. In: Handbook of combustion. Wiley. ISBN 9783527324491

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

Conference or Workshop contribution

Aris, Mohd S., Owen, Ieuan and Sutcliffe, Chris J. (2007) The application of shape memory alloy as vortex generators and flow control devices for enhanced convective heat transfer. In: 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007, July 30–August 2, 2007, San Diego, California, USA.

Aris, Mohd S., Owen, Ieuan and Sutcliffe, Chris J. (2008) The development of active flow control devices from shape memory alloys for the convective cooling of heated surfaces. In: ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, 31 October 2008 - 6 November 2008;, Boston, Massachusetts, USA.

Boretti, Alberto, Jin, Seong-Ho, Zakis, George, Brear, Michael, Attard, William, Watson, Harry, Carlisle, H. and Bryce, W. (2007) Experimental and numerical study of an air assisted fuel injector for a D.I.S.I. engine. In: 2007 SAE World Congress, April 16-19, 2007, Detroit, Michigan.

Carty, S., Owen, I., Bastow, B. and Steen, W. M. (1994) Powder flow from novel nozzle design for laser cladding and alloying. In: 1994 Conference on Lasers and Electro-Optics Europe, 28 August - 2 September 1994, RAI Congress Centre, Amsterdam, The Netherlands.

Castagna, J., Yao, Y. and Yao, J. (2012) Numerical simulation of a turbulent flow over an axisymmetric hill. In: The 50th AIAA Aerospace Sciences Meeting, 9 - 12 Jan 2012, 9 - Gaylord Opryland Resort & Convention Center, Nashville, Tennessee.

Effendy, Marwan, Yao, Yufeng and Yao, Jun (2013) Comparison study of turbine blade with trailing–edge cutback coolant ejection designs. In: The 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 07 - 10 January 2013, Grapevine (Dallas/Ft. Worth Region) Texas.

Effendy, Marwan, Yao, Yufeng, Yao, Jun and Marchant, Denis R (2019) Pin-fin shape and orientation effects on wall heat transfer predictions of gas turbine blade. In: The 5th International Conference on Engineering, Technology, and Industrial Application, 12-13 DECEMBER 2018, SURAKARTA, INDONESIA.

Forrest, J. S., Hodge, S. J., Owen, I. and Padfield, G. D. (2008) An investigation of ship airwake phenomena using time-accurate CFD and piloted helicopter flight simulation. In: 34th European Rotorcraft Forum 2008, ERF34, 16 - 19 September 2008, Liverpool, UK.

Forrest, James S., Hodge, Steven J., Owen, Ieuan and Padfield, Gareth D. (2008) Towards fully simulated ship-helicopter operating limits: the importance of ship airwake fidelity. In: 64th Annual Forum - AHS International, 29 April 2008 - 1 May 2008, Montreal, Canada.

Gray, J. D., Owen, I. and Escudier, M. P. (2001) An experimental study of the effects of non-Newtonian blood rheology in a large scale model of a distal anastomosis. In: 2001 ASME International Mechanical Engineering Congress and Exposition, 11 - 16 November 2001, New York, New York.

Horikiri, K., Yao, Y. and Yao, Jun (2012) Numerical study of unsteady airflow phenomena in a ventilated room. In: ICHMT Int. Symp. On Advances in Computational Heat Transfer, July 1, 2012, Bath, UK.

Huang, J., Cao, Y., Yao, Y. and Yao, J. (2016) Multistep simulation for three-dimensional ice accretion on an aircraft wing. In: 54th AIAA Aerospace Sciences Meeting: AIAA, 4 - 8 January 2016, San Diego, California, USA.

Jenkinson, Ian R., Berdalet, Elisa, Chin, Wie-Chun, Herminghaus, Stephan, Leterme, Sophie, Mitchell, James G., Orchard, Michael, Qiu, Ri, Seuront, Laruent, Wang, Peng, Wyatt, Tim and Zhuo, Li (2014) Micro- and nano-fluidics around HAB cells. In: 16th ICHA Conference, 27 - 31 October 2014, Wellington, New Zealand.

Jin, Seong-Ho (2019) Advanced sensing combustion dynamics and combustion-generated acoustic noise. In: EKC 2019, 15-19 July 2019, Vienna, Austria.

Jin, Seong-Ho (2018) Investigating high temperature energy flow on the wall. In: EKC 2018, 20TH - 24TH AUGUST 2018, Glasgow, UK.

Jin, Seong-Ho (2017) Noise generation from methane/air premixed flames. In: EKC 2017, 26 - 29 July 2017, Stockholm, Sweden.

Jin, Seong-Ho (2013) Temperature distribution measurements in an optically accessible single-cylinder engine using phosphor thermometry. In: EKC 2013, 24-26 July 2013, Brighton, UK.

Jin, Seong-Ho and Brear, Michael (2016) On the use of the laser sheet drop-sizing (LSD) technique: droplet size distribution by uncertainty analysis. In: The 36th International Symposium on Combustion, 31st July - 5th August, Seoul, Korea.

Jin, Seong-Ho, Brear, Michael and Brewster, Simon (2008) Spray behaviour of hydrous ethanol fuel (E93) under cold condition. In: Fifth Australian Conference on Laser Diagnostics in Fluid Mechanics and Combustion, 3-4 December 2008, The University of Western Australia, Perth, Australia.

Jin, Seong-Ho, Brear, Michael and Watson, Harry (2006) Transient spray behaviour of an air-assisted liquid injector. In: Australian Workshop on Fluid, December 2006.

Jin, Seong-Ho, Brear, Michael, Zakia, George, Watson, Harry and Zavier, Christian (2004) Transient behaviour of the fuel spray from an air-assisted, direct fuel injector. In: 15th Australasian Fluid Mechanics Conference, 13-17 December 2004, The University of Sydney, Sydney, Australia.

Jin, Seong-Ho, Brear, Michael, Zakis, George, Watson, Harry and Carlisle, Hugh (2005) Effect of chamber pressure on the spray from an air-assisted, direct fuel injector. In: 5th Asia-Pacific Conference on Combustion, 17-20 July 2005, University of Adelaide.

Jin, Seong-Ho and Chung, Suk-Ho (2003) Self-excited noise generation from laminar methane/air premixed flames in thin annular jets. In: 2003 Australian Symposium on Combustion & The 8th Australian Flames Days, 2003, Monash University.

Karimi, Nader, Brear, Michael and Jin, Seong-Ho (2004) Nonlinear dynamics of thermoacoustic instability using a kinematic, premixed flame model. In: 15th Australasian Fluid Mechanics Conference, 13-17 December 2004, University of Sydney, Australia.

Karimi, Nader, Brear, Michael, Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part I: low amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, The University of Queensland, Brisbane.

Karimi, Nader, Brear, Michael, Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part II: higher amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, University of Queensland, Brisbane.

Karimi, Nader, Brear, Michael, Jin, Seong-Ho and Monty, Jason (2008) Experimental investigation of the linear and non-linear dynamics of a ducted, laminar premixed flame. In: The 32nd International Symposium on Combustion, 3-8 August 2008, Montreal, Canada.

Karimi, Nader, Jin, Seong-Ho and Brear, Michael (2007) An experimental study of the transfer function of a ducted, laminar premixed flame. In: 16th Australasian Fluid Mechanics Conference, 2-7 December 2007, Gold Coast, Australia.

Kim, Kil-Nam, Joung, Jae-Hoon, Jin, Seong-Ho and Chung, Suk-Ho (2004) Self-excited noise generation from laminar methane/air premixed flames in thin annular jets. In: 2004 Korea-Japan Joint Seminar, December 2004.

Owen, I. and Amini, A. (1995) Study of hydraulic impacts in steam plant. In: 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, 13 - 18 August 1995, Hilton Head, South Carolina.

Owen, I. and Amini, A. (1997) Use of critical flow Venturi nozzles with steam. In: 1997 ASME Fluids Engineering Division Summer Meeting, FEDSM'97, 22 - 26 June 1997, Vancouver, British Columbia, Canada..

Owen, I., Fyrippi, I. and Escudier, M. P. (2003) Flowmetering of shear-thinning non-Newtonian liquids. In: 4th ASME/JSME Joint Fluids Engineering Conference, 6 - 10 July 2003, Honolulu, Hawaii.

Owen, I., Gray, J. D. and Escudier, M. P. (2003) PIV measurements in large-scale cardiovascular models: the importance of dynamic scaling. In: 1st International Conference on Optical and Laser Diagnostic, 16 - 20 December 2002, London.

Owen, I. and Madadnia, J. (1995) Valve erosion in cavitating particulate-laden flows. In: 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, 13 - 18 August 1995, Hilton Head, South Carolina.

Owen, Ieuan (1985) Diffusion of aerosols onto a heated turbine blade. In: International Symposium Workshop on Particulate and Multiphase Processes, April 22-26, 1985, Miami, Florida.

Roper, David M., Owen, Ieuan and Padfield, Gareth D. (2005) CFD investigation of the helicopter-ship dynamic interface. In: 61st American Helicopter Society International Annual Forum 2005, 1 - 3 June 2005, Grapevine, Texas.

Syawitri, T., Yao, Y.F., Yao, Jun and Chandraa, B. (2019) Assessment of stress-blended eddy simulation model for accurate prediction of three-straight-bladed vertical axis wind turbine performance. In: 54th 3AF International Conference on Applied Aerodynamics, 25 – 27 March 2019, Paris, France.

Syawitria, T., Yao, Y.F., Chandra, B. and Yao, Jun (2019) CFD Simulation of Three-Straight-Bladed Vertical Axis Wind Turbine at Low Tip Speed Ratios. In: International Conference of Global Warming and Climate Change 2018, Bangkok, Thailand, 4 - 5 October 2018, 4 - 5 October 2018, Thailand.

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

Yao, Jun, Yao, Y.F., Patel, M. K. and Mason, P. J. (2006) Numerical simulation of microchannel cooling and heat transfer. In: 13th International Heat Transfer Conference, August 13, 2006, Sydney, Australia.

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

Yao, Jun and Yao, Yufeng (2016) Numerical investigation of wavy-annular airwater two-pase flow in a small horizontal pipe. In: EFCM11 11th European Fluid Mechanics Conference, 12-16 September 2016, Seville, Spain.

Yao, Jun, Yao, Yufeng, Arini, A., McIlwain, S., Gordon, T. J. and Jin, S. H. (2015) Modelling air and water two-phase annular flow in small horizontal pipe. In: The Sixth International Symposium on Physics of Fluids (ISPF6), Xining, 6 - 9 July 2015, Xining, China.

Yao, Yufeng, Yao, Jun and Effendy, M. (2012) Evaluation of wall heat transfer in turbine blade trailing-edge passage. In: The 2nd Int. Conf. on Engineering and Technology Innovation, November 2012, Kaohsiung, Taiwan.

This list was generated on Thu Feb 27 09:53:06 2020 GMT.