Article

Al-Khafajiy, Mohammed, Baker, Thar, Al-Libawy, Hilal, Maamar, Zakaria, Aloqaily, Moayad and Jararweh, Yaser (2019) Improving fog computing performance via Fog-2-Fog collaboration. Future Generation Computer Systems, 100 . pp. 266-280. ISSN 0167-739X

Al-Khafajiy, Mohammed, Baker, Thar, Asim, Muhammad, Guo, Zehua, Ranjan, Rajiv, Longo, Antonella, Puthal, Deepak and Taylor, Mark (2020) COMITMENT: A Fog Computing Trust Management Approach. Journal of Parallel and Distributed Computing, 137 . pp. 1-16. ISSN 0743-7315

Ayoub, Mohammed and Elseragy, Ahmed (2018) Parameterization of traditional domed-roofs insolation in hot-arid climates in Aswan, Egypt. Energy & Environment, 29 (1). pp. 109-130. ISSN 0958-305X

Chen, Lumin, Liu, Kaixuan, Yao, Yufeng, Yao, Jun, Su, Zixue and Luo, Guofo (2020) Flow analysis in right-angled pipes with different geometric shapes and parameters for sludge discharge in slime shield machines measured using a CFD-DEM method. Journal International Journal for Computational Methods in Engineering Science and Mechanics, 21 (5). pp. 231-242. ISSN 1550-2287

Gladwin, D., Stewart, P., Stewart, J., Chen, R. and Winward, E. (2010) Improved decision support for engine-in-the-loop experimental design optimization. Proceedings of the IMechE, Part D: Automobile Engineering, 224 (2). pp. 201-218. ISSN 0954-4070

Guevara, Leonardo, Michałek, Maciej Marcin and Auat Cheein, Fernando (2020) Collision risk reduction of N-trailer agricultural machinery by off-track minimization. Computers and Electronics in Agriculture, 178 . p. 105757. ISSN 0168-1699

Guevara, Leonardo, Michałek, Maciej Marcin and Auat Cheein, Fernando (2020) Headland turning algorithmization for autonomous N-trailer vehicles in agricultural scenarios. Computers and Electronics in Agriculture, 175 . p. 105541. ISSN 0168-1699

Horikiri, Kana, Yao, Yufeng and Yao, Jun (2012) Numerical study of unsteady airflow phenomena in a ventilated room. Computational Thermal Sciences, 4 (4). pp. 317-333. ISSN 1940-2503

Horikiri, Kana, Yao, Yufeng and Yao, Jun (2015) Numerical optimisation of thermal comfort improvement for indoor environment with occupants and furniture. Energy and Buildings, 88 . pp. 303-315. ISSN 0378-7788

Isakhani, Hamid, Xiong, Caihua, Chen, Wenbin and Yue, Shigang (2021) Towards locust-inspired gliding wing prototypes for micro aerial vehicle applications. Royal Society Open Science, 8 (6). p. 202253. ISSN 2054-5703

Isakhani, Hamid, Yue, Shigang, Xiong, Caihua and Chen, Wenbin (2021) Aerodynamic Analysis and Optimization of Gliding Locust Wing Using Nash Genetic Algorithm. AIAA Journal, 59 (10). pp. 4002-4013. ISSN 0001-1452

Li, Jing, Zhu, Ming, Yu, Miao, Yan, Yuhong and Chui, Lizhen (2020) A Service Composition Approach Based on Pre-joined Service Network in Graph Database. International Journal of Web and Grid Services, 16 (4). pp. 422-440. ISSN 1741-1106

Maamar, Zakaria, Kajan, Ejub, Al-Khafajiy, Mohammed, Dohan, Murtada, Fayoumi, Amjad and Yahya, Fadwa (2023) A multi-type artifact framework for cyber–physical, social systems design and development. Internet of Things, 22 . p. 100820. ISSN 2542-6605

Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2016) 2-D online changepoint detection algorithm for sensor-based fault detection. International Journal of Advances in Computer Science & Its Applications, 6 (1). pp. 109-114. ISSN 2250-3765

Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2016) Development and realisation of changepoint analysis for the detection of emerging faults on industrial systems. IEEE Transactions on Industrial Informatics, 12 (3). pp. 1180-1187. ISSN 1551-3203

Margetts, Rebecca (2018) Modelling the Dynamics of a Three-wheeled Racecar: A Pilot Study to Establish the Feasibility of Developing a ‘Delta’ Configuration Performance Car. Preprints . ISSN 2310-287X

Nandakumar, R., Zolotas, A. C. and Halikias, G. D. (2007) Design of optimal robust fixed-structure controllers using the quantitative feedback theory approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (4). pp. 697-716. ISSN 0959-6518

O'Hana, Sarah, Pinkerton, A. J., Shoba, Kalsang, Gale, A. W. and Li, L. (2008) Laser surface colouring of titanium for contemporary jewellery. Surface Engineering, 24 (2). pp. 147-153. ISSN 0267-0844

Pang, Liping, Li, Pei, Liu, Dong, Zhou, Yue and Yao, Jun (2018) Optimization of air distribution mode coupled interior design for civil aircraft cabin. Building and Environment, 134 . pp. 131-145. ISSN 0360-1323

Pavlou, D., Orfanou, A., Busato, P., Berruto, R., Sørensen, C. and Bochtis, D. (2016) Functional modeling for green biomass supply chains. Computers and Electronics in Agriculture, 122 . pp. 29-40. ISSN 01681699

Syawitri, Taurista Perdana, Yao, Yu-Feng, Yao, Jun and Chandra, Budi (2020) The effect of gurney flap on flow characteristics of vertical axis wind turbine. International Journal of Modern Physics B, 34 (14n16). p. 2040107. ISSN 0217-9792

Vasconez, Juan Pablo, Viscaino, Michelle, Guevara, Leonardo and Auat Cheein, Fernando (2020) A fuzzy-based driver assistance system using human cognitive parameters and driving style information. Cognitive Systems Research, 64 . pp. 174-190. ISSN 1389-0417

Voss, Christopher A., Russell, Vicky and Twigg, David (1991) Implementation issues in simultaneous engineering. International Journal of Technology Management, 6 (3/4). pp. 293-302. ISSN 0267-5730

Zhang, Yu, Bingham, Chris and Maleki, Sepehr (2016) Measurement reconstruction in sensor networks for industrial systems. International Journal of Advances in Computer Science & Its Applications, 6 (1). pp. 105-108. ISSN 2250-376X

Zheng, Xuqiang, Wang, Zhijun, Li, Fule, Zhao, Feng, Yue, Shigang, Zhang, Chun and Wang, Zhihua (2016) A 14-bit 250 MS/s IF sampling pipelined ADC in 180 nm CMOS process. IEEE Transactions on Circuits and Systems I: Regular Papers, 63 (9). pp. 1381-1392. ISSN 1549-8328

Book Section

Chen, Jun, Gallimore, Michael, Bingham, Chris, Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Ghatwary, Noha, Ahmed, Amr and Ye, Xujiong (2017) Automated detection of Barrett’s esophagus using endoscopic images: a survey. In: Medical image understanding and analysis. Communications in Computer and Information Science (723). Springer, pp. 897-908. ISBN UNSPECIFIED

Maidi, M., Yao, Y. and Yao, Jun (2009) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: New trends in fluid mechanics research. Springer, pp. 416-419. ISBN 3540759948

Conference or Workshop contribution

Amer, Alyaa, Ye, Xujiong, Zolgharni, Massoud and Janan, Faraz (2020) ResDUnet: Residual Dilated UNet for Left Ventricle Segmentation from Echocardiographic Images. In: 42nd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), 20-24 July 2020, Montreal Canada.

Borg, J. C., Yan, X. T. and Juster, N. P. (2000) Knowledge Intensive CAD of Thermoplastic Components. In: International Manufacturing Technology Show, Dublin, Ireland.

Chen, Jun and Mahfouf, Mahdi (2006) A population adaptive based immune algorithm for solving multi-objective optimization problems. In: 5th International Conference on Artificial Immune System, 4-6th September 2006, Instituto Gulbenkian de Ciência, Oeiras, Portugal.

Chen, Jun and Mahfouf, Mahdi (2010) Interpretable fuzzy modeling using multi-objective immune-inspired optimization algorithms. In: 2010 IEEE World Congress on Computational Intelligence, July 18-23 2010, Barcelona.

Gaffour, Sidahmed, Mahfouf, Mahdi and Chen, Jun (2010) Optimisation of metal microstructure using a population adaptive based immune algorithm. In: 18th Mediterranean Conference on Control and Automation, 23-25 June 2010, Congress Palace Hotel, Marrakech, Morocco.

Guevara, Leonardo, Torres-Torriti, Miguel and Auat Cheein, Fernando (2019) Collision-free navigation of N-trailer vehicles with motion constraints. In: 12th International Workshop on Robot Motion and Control (RoMoCo).

Isakhani, Hamid, Xiong, Caihua, Yue, Shigang and Chen, Wenbin (2020) A Bioinspired Airfoil Optimization Technique Using Nash Genetic Algorithm. In: 2020 17th International Conference on Ubiquitous Robots (UR), 22-26 June 2020, Kyoto, Japan.

Isakhani, Hamid, Yue, Shigang, Xiong, Caihua, Chen, Wenbin, Sun, Xuelong and liu, Tian (2020) Fabrication and Mechanical Analysis of Bioinspired Gliding-optimized Wing Prototypes for Micro Aerial Vehicles. In: 5th International Conference on Advanced Robotics and Mechatronics (ICARM), 18-21 Dec. 2020.

Maleki, Sepehr and Bingham, Chris (2017) A one-class clustering technique for novelty detection and Isolation in sensor networks. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications, 26 - 28 June 2017, Annecy, France.

Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2015) 2-D online changepoint detection algorithm for sensor-based fault detection. In: Third International Conference on Advances in Computing, Electronics and Communication, 10 - 11 October 2015, Zurich, Switzerland.

Yao, Jun and Yao, Y. (2014) Predicting film cooling performance of trailing–edge cutback turbine blades by detached–eddy simulation. In: AIAA Science and Technology Forum and Exposition 2014, 13 - 17 January 2014, National Harbor, Maryland.

Book or Monograph

Trzcielinski, Stefan, Mrugalska, Beata, Karwowski, Waldemar, Rossi, Emilio and Di Nicolantonio, Massimo, eds. (2021) Advances in Manufacturing, Production Management and Process Control: Proceedings of the AHFE 2021 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 25-29, 2021, USA. Lecture Notes in Networks and Systems, 274 . Springer International Publishing. ISBN 9783030804619

From, Pal, Gravdahl, Jan Tommy and Pettersen, Kristin Ytterstad (2014) Vehicle-Manipulator Systems. Advances in Industrial Control . Springer, London. ISBN UNSPECIFIED

Schaefer, Dirk (2018) Interpolation mittels lokaler Interpolierender und Blendetechniken. Shaker Verlag, pp. 1-71. ISBN 978-3-8440-6182-6