|Up a level|
Agbonzikilo, Festus and Owen, Ieuan and Sadasivuni, Suresh Kumar and Bickerton, Ronald A. (2015) Investigation of flow aerodynamics for optimal fuel placement and mixing in the radial swirler slot of a dry low emission gas turbine combustion chamber. Journal of Engineering for Gas Turbines and Power, 138 (5). 051505. ISSN 0742-4795
Agbonzikilo, Festus and Owen, Ieuan and Stewart, Jill and Sadasivuni, Suresh Kumar and Riley, Mike and Sanderson, Victoria (2015) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. Journal of Engineering for Gas Turbines and Power, 138 (6). ISSN 0742-4795
Al-Ansari, A. D. and Owen, I. (1999) Thermal and hydrodynamic analysis of the condensation and evaporation processes in horizontal tube desalination plant. International Journal of Heat and Mass Transfer, 42 (9). pp. 1633-1644. ISSN 0017-9310
Aris, M. S. and Owen, I. and Sutcliffe, C. J. (2011) The development of active vortex generators from shape memory alloys for the convective cooling of heated surfaces. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3566-3574. ISSN 0017-9310
Bhattacharya, Basabdatta S. and Patterson, Cameron and Galluppi, Francesco and Durrant, Simon J. and Furber, Steve (2014) Engineering a thalamo-cortico-thalamic circuit on spinnaker: a preliminary study toward modeling sleep and wakefulness. Frontiers in Neural Circuits, 8 . ISSN 1662-5110
Buyruk, E. and Barrow, H. and Owen, I. (1999) Heat transfer in laminar flow in a concentric annulus with peripherally varying heat transfer. International Journal of Heat and Mass Transfer, 42 (3). pp. 487-496. ISSN 0017-9310
Buyruk, E. and Johnson, M. W. and Owen, I. (1998) Numerical and experimental study of flow and heat transfer around a tube in cross-flow at low Reynolds number. International Journal of Heat and Fluid Flow, 19 (3). pp. 223-232. ISSN 0142-727X
Chaturvedi, B. and Gordon, T. and Karamihas, S. (2012) The influence of road surface properties on vehicle suspension parameters optimized for ride: design trends for global markets. SAE International Journal of Passenger Cars - Mechanical Systems, 5 (1). pp. 404-412. ISSN 1946-3995
Chaudhuri, Balarko and Pal, Bikash C. and Zolotas, Argyrios and Jaimoukha, Imad M. and Green, Tim C. (2003) Mixed-sensitivity approach to H-infinity control of power system oscillations employing multiple FACTS devices. IEEE Transactions on Power Systems, 18 (3). 1149 - 1156. ISSN 0885-8950
Chen, X. and Ling, B.W.-K. and Sun, L.-M. (2012) Nonlinear behaviors of gear shifting digital phase locked loops. International Journal of Bifurcation and Chaos, 22 (8). p. 1250204. ISSN 0218-1274
Cipolla, V. and Frediani, A. and Molfino, R. and Muscolo, G. G. and Oliviero, F. and Puig, D. and Recchiuto, C. T. and Rizzo, E. and Solanas, A. and Stewart, P. (2014) A personal robotic flying machine with vertical takeoff controlled by the human body movements. Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 8069 L . pp. 51-52. ISSN 16113349
Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464
Derbyshire, P. M. and Owen, I. (1988) Transient heat transfer in a boiled potato: a study related to food process engineering. International Journal of Heat and Fluid Flow, 9 (2). pp. 254-256. ISSN 0142-727X
Dowding, Colin and Dowding, Robert and Franceschini, Federica and Griffiths, Jonathan David (2015) The effect of laser power, traverse velocity and spot size on the peel resistance of a polypropylene/adhesive bond. Packaging Technology and Science, 28 (7). pp. 621-632. ISSN 0894-3214
Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios (2010) Modelling and control of a high redundancy actuator. Mechatronics, 20 (1). 102 - 112. ISSN 0957-4158
Duckett, Tom and Lilienthal, Achim (2013) Editorial. Robotics and Autonomous Systems, 61 (10). pp. 1049-1050. ISSN 0921-8890
Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Temperature gradient mechanism: overview of the multiple pass controlling factors. Physics Procedia, 5 (A). pp. 53-63. ISSN 1875-3892
Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2012) Towards controlled three-dimensional laser forming. Lasers in Engineering, 22 (5/6). pp. 393-399. ISSN 0898-1507
Edwardson, Stuart and Griffiths, Jonathan David and Edwards, Kenneth and Dearden, Geoff and Watkins, Ken (2010) Laser forming: overview of the controlling factors in the temperature gradient mechanism. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (5). pp. 1031-1040. ISSN 0954-4062
Effendy, Marwan and Yao, Yu Feng and Yao, Jun (2013) Effect of mesh topologies on wall heat transfer and pressure loss prediction of a blade coolant passage. Applied Mechanics and Materials, 315 . pp. 216-220. ISSN 1660-9336
Gentili, Luca and Paoli, Andrea and Bonivento, Claudio (2009) Tracking of partially unknown trajectories for permanent magnet synchronous motors. European Journal of Control, 15 (6). pp. 599-612. ISSN 0947-3580
Gordon, T. J. (1991) Infinite gain margins in non-linear regulators. International Journal of Control, 54 (3). pp. 547-560. ISSN 0020-7179
Gordon, T. J. (1986) On the symmetries and invariants of the harmonic oscillator. Journal of Physics A: Mathematical and General, 19 (2). pp. 183-189. ISSN 0305-4470
Gordon, T. J. (1987) Simple method for the design of Lyapunov functionals in distributed-parameter systems. International Journal of Control, 46 (2). pp. 709-717. ISSN 0020-7179
Gordon, T. J. and Best, M. C. (2006) On the synthesis of driver inputs for the simulation of closed-loop handling manoeuvres. International Journal of Vehicle Design, 40 (1-3). pp. 52-76. ISSN 0143-3369
Gordon, T. J. and Williams, N. G. (1991) Statistical properties of frequency response estimators and the determination of confidence intervals for transfer function parameters. International Journal of Systems Science, 22 (8). pp. 1357-1370. ISSN 0020-7721
Gordon, T. J. and Williams, N.G. (1989) Bias evaluation and reduction in linear least squares procedures for the synthesis of transfer functions. International Journal of Systems Science, 20 (11). pp. 2213-2226. ISSN 0020-7721
Gordon, Timothy and Mitra, Manaik (2013) Dynamic load estimation for heavy trucks on bridge structures. SAE International Journal of Commercial Vehicles, 6 (1). pp. 62-72. ISSN 1946-391X
Griffiths, Jonathan David and Dowding, Colin and Kirk, Antony (2016) Multimode VIS–NIR transmission through silver coated hollow optical waveguides. Optik - International Journal for Light and Electron Optics, 127 (2). pp. 728-731. ISSN 0030-4026
Griffiths, Jonathan David and Edwardson, S. P. and Dearden, G. and Watkins, K. G. (2012) Thermal laser micro-adjustment using picosecond pulse durations. Applied Surface Science, 258 (19). pp. 7639-7643. ISSN 0169-4332
Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892
Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken and Boegelein, S. P. and Prandina, T. (2012) Finite element modelling of the laser forming of AISI 1010 steel. Lasers In Engineering, 22 (5/6). pp. 401-412. ISSN 0898-1507
Griffiths, Jonathan David and Lawrence, Jonathan and Fitzsimons, P. (2013) Effect of ignition location on the in-process removal of combustion deposits from the output window of a gas turbine laser ignition system. Optics & Laser Technology, 48 . pp. 326-330. ISSN 0030-3992
Griffiths, Jonathan David and Riley, Mike and Borman, Alexander and Dowding, Colin and Kirk, Antony and Bickerton, Ronald (2015) Effect of flow velocity and temperature on ignition characteristics in laser ignition of natural gas and air mixtures. Optics and Lasers in Engineering, 66 . pp. 132-137. ISSN 0143-8166
Jiang, Zheng and Matamoros-Sanchez, Alejandra Z. and Zolotas, Argyrios and Goodall, Roger and Smith, Malcolm (2015) Passive suspensions for ride quality improvement of two-axle railway vehicles. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit, 229 (3). pp. 315-329. ISSN 0954-4097
Knowles, Grahame and Kirk, Antony and Stewart, Jill and Bickerton, Ronald and Bingham, Chris (2014) Theoretical investigation into balancing high-speed flexible shafts, by the use of a novel compensating balancing sleeve. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (13). pp. 2323-2336. ISSN 0954-4062
Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936
Lee, T.-K. and Bareket, Z. and Gordon, T. and Filipi, Z. S. (2012) Stochastic modeling for studies of real-world PHEV usage: driving schedule and daily temporal distributions. IEEE Transactions on Vehicular Technology, 61 (4). pp. 1493-1502. ISSN 0018-9545
Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Cvetkovic, Zoran (2012) Commutativity of block decimators and expanders with arbitrary rational sampling ratios and block lengths. Digital Signal Processing: A Review Journal, 22 (4). pp. 677-680. ISSN 1051-2004
Locatelli, Giorgio and Mancini, Mauro and Todeschini, Nicola (2013) Generation IV nuclear reactors: current status and future prospects. Energy Policy, 61 . pp. 1503-1520. ISSN 0301-4215
Locatelli, Giorgio and Palerma, Emanuele and Mancini, Mauro (2015) Assessing the economics of large energy storage plants with an optimisation methodology. Energy, 83 . ISSN 0360-5442
Locatelli, Giorgio and Mancini, Mauro (2012) How EPC firms can enter the nuclear renaissance. Organization, Technology & Management in Construction: An International Journal, 4 (2). pp. 534-551. ISSN 1847-5450
Locatelli, Giorgio and Mancini, Mauro (2011) Looking back to see the future: building nuclear power plants in Europe. Construction Management and Economics, 30 (8). pp. 623-637. ISSN 0144-6193
Locatelli, Giorgio and Mancini, Mauro (2012) A framework for the selection of the right nuclear power plant. International Journal of Production Research, 50 (17). pp. 4753-4766. ISSN 0020-7543
Lynch, J. P. and Kamat, V. and Li, V. C. and Flynn, M. and Sylvester, D. and Najafi, K. and Gordon, T. and Lepech, M. and Emami-Naeini, A. and Krimotat, A. and Ettouney, M. and Alampalli, S. and Ozdemir, T. (2009) Overview of a cyber-enabled wireless monitoring system for the protection and management of critical infrastructure systems. Proceedings of SPIE - The International Society for Optical Engineering, 7294 . ISSN 0277-786X
Margetts, R. and Ngwompo, R. F. (2015) Mode switching in causally dynamic hybrid bond graphs. Mechatronics, 28 . pp. 96-102. ISSN 0957-4158
Michail, Konstantinos and Zolotas, Argyrios and Goodall, RogerM. (2013) Fallback options for airgap sensor fault of an electromagnetic suspension system. Central European Journal of Engineering, 3 (2). pp. 206-220. ISSN 1896-1541
Montague, R. G. and Bingham, Chris and Atallah, K. (2013) Magnetic gear pole-slip prevention using explicit model predictive control. IEEE/ASME Transactions on Mechatronics, 18 (5). pp. 1535-1543. ISSN 1083-4435
Montague, Ryan and Bingham, Chris (2013) Nonlinear control of magnetically-geared drive-trains. International Journal of Automation and Computing, 10 (4). pp. 319-326. ISSN 1476-8186
Nandakumar, R. and Zolotas, A. C. and Halikias, G. D. (2007) Design of optimal robust fixed-structure controllers using the quantitative feedback theory approach. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, 221 (4). pp. 697-716. ISSN 0959-6518
Owens, Jonathan D. (2003) Winning the fight for engineers. Lincolnshire Echo, Business Edition . ISSN 0962-5003
Paoli, Andrea and Lafortune, Stéphane (2008) Diagnosability analysis of a class of hierarchical state machines. Discrete Event Dynamic Systems: Theory and Applications, 18 (3). pp. 385-413. ISSN 0924-6703
Paoli, Andrea and Sartini, Matteo and Lafortune, Stephane (2011) Active fault tolerant control of discrete event systems using online diagnostics. Automatica, 47 (4). pp. 639-649. ISSN 0005-1098
Rahimi, M. and Owen, I. and Mistry, J. (2003) Heat transfer between an under-expanded jet and a cylindrical surface. International Journal of Heat and Mass Transfer, 46 (17). pp. 3135-3142. ISSN 00179310
Rahimi, M. and Owen, I. and Mistry, J. (2003) Impingement heat transfer in an under-expanded axisymmetric air jet. International Journal of Heat and Mass Transfer, 46 (2). pp. 263-272. ISSN 0017-9310
Rogers, D. and Foster, M. and Bingham, C. (2013) A recursive modelling technique applied to the model predictive control of fluid filled heat emitters. Building and Environment, 62 . pp. 33-44. ISSN 0360-1323
Sarria, Fabio and Morris, Glenn K. and Windmill, James F. C. and Jackson, Joseph and Montealegre-Z, Fernando (2014) Shrinking wings for ultrasonic pitch production: hyperintense ultra-short-wavelength calls in a new genus of neotropical katydids (Orthoptera: tettigoniidae). PLoS ONE, 9 (6). e98708. ISSN 1932-6203
Sheikholeslami, Ghazal and Griffiths, Jonathan David and Edwardson, Stuart and Watkins, Ken and Dearden, Geoff (2013) Laser forming of ERW steel square tubes within metallurgical constraints. Key Engineering Materials, 549 . ISSN 1013-9826
Stewart, Paul and Stone, D. A. and Fleming, P. J. (2004) Design of robust fuzzy-logic control systems by multi-objective evolutionary methods with hardware in the loop. Engineering Applications of Artificial Intelligence, 17 (3). pp. 275-284. ISSN 0952-1976
Stewart, P. and Gladwin, D. and Stewart, J. and Cowley, R. (2008) Generator voltage stabilisation for series-hybrid electric vehicles. ISA Transactions, 47 (2). pp. 222-228. ISSN 0019-0578
Subramaniam, S. R. and Ling, B.W.-K. and Georgakis, A. (2012) Filtering in rotated time-frequency domains with unknown noise statistics. IEEE Transactions on Signal Processing, 60 (1). pp. 489-493. ISSN 1053-587X
Wilkinson, J. and Motamed-Amini, A. and Owen, I. (1988) Compressible and confined vortex flow. International Journal of Heat and Fluid Flow, 9 (4). pp. 373-380. ISSN 0142-727X
Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310
Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. (2012) Quasi-linear optimal path controller applied to post impact vehicle dynamics. IEEE Transactions on Intelligent Transportation Systems, 13 (4). pp. 1586-1598. ISSN 1524-9050
Yang, Jun and Zolotas, Argyrios and Chen, Wen-Hua and Michail, Konstantinos and Li, Shihua (2011) Robust control of nonlinear MAGLEV suspension system with mismatched uncertainties via DOBC approach. ISA Transactions, 50 (3). 389 - 396. ISSN 0019-0578
Yang, Z. and Ling, B. W.-K. and Bingham, C. (2013) Joint empirical mode decomposition and sparse binary programming for underlying trend extraction. IEEE Transactions on Instrumentation and Measurement, 62 (10). pp. 2673-2682. ISSN 0018-9456
Yang, Zhijing and Ling, B.W.-K and Bingham, Chris (2013) Fault detection and signal reconstruction for increasing operational availability of industrial gas turbine. Measurement: Journal of the International Measurement Confederation, 46 (6). pp. 1938-1946. ISSN 0263-2241
Yang, Zhijing and Ling, Bingo Wing-Kuen and Bingham, Chris (2015) Approximate affine linear relationship between L1 norm objective >functional values and L2 norm constraint bounds. IET Signal Processing . ISSN 1751-9683
Yang, Zhijing and Ling, Bingo Wing-Kuen and Bingham, Chris (2013) Trend extraction based on separations of consecutive empirical mode decomposition components in Hilbert marginal spectrum. Measurement: Journal of the International Measurement Confederation, 46 (8). pp. 2481-2491. ISSN 0263-2241
Yao, Yu Feng and Effendy, Marwan and Yao, Jun (2013) Evaluation of wall heat transfer in blade trailing-edge cooling passage. Applied Mechanics and Materials, 284-28 . pp. 738-742. ISSN 1660-9336
Yu, R. and Pong, B. M. H. and Ling, B. W.-K. and Lam, J. (2012) Two-stage optimization method for efficient power converter design including light load operation. IEEE Transactions on Power Electronics, 27 (3). pp. 1327-1337. ISSN 0885-8993
Zamzuri, Hairi and Zolotas, Argyrios and Goodall, Roger and Mazlan, Saiful Amri (2012) Advances in tilt control design of high-speed railway vehicles: a study on fuzzy control methods. International Journal of Innovative Computing, Information and Control, 8 (9). pp. 6067-6080. ISSN UNSPECIFIED
Zamzuri, Hairi and Zolotas, Argyrios and Goodall, Roger M (2008) Tilt control design for high-speed trains: a study on multi-objective tuning approaches. Vehicle System Dynamics, 46 (Sup 1). pp. 535-547. ISSN 0042-3114
Zheng, Xiang and Zolotas, Argyrios and Wang, Hong (2006) Mathematica implementation of output-feedback pole assignment for uncertain systems via symbolic algebra. International Journal of Control, 79 (11). pp. 1431-1446. ISSN 0020-7179
Zhou, J. and Peng, H. and Gordon, T. J. (2009) Characterization of the lateral control performance by human drivers on highways. SAE International Journal of Passenger Cars - Electronic and Electrical Systems, 1 (1). pp. 450-458. ISSN 1946-4614
Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2011) Integrated tilt with active lateral secondary suspension control for high speed railway vehicles. Mechatronics, 21 (6). pp. 1108-1122. ISSN 0957-4158
Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2014) Robust system state estimation for active suspension control in high-speed tilting trains. Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility, 52 (Supp 1). pp. 355-369. ISSN 0042-3114
Zolotas, Argyrios and Chaudhuri, Balarko and Jaimoukha, Imad M and Korba, Petr (2007) A study on LQG/LTR control for damping inter-area oscillations in power systems. IEEE Transactions on Control Systems Technology, 15 (1). 151 -160. ISSN 1063-6536
Zolotas, Argyrios and Halikias, G. D. (1999) Optimal design of PID controllers using the QFT method. IEE Proceedings Control Theory and Applications, 146 (6). 585 -589. ISSN 1350-2379
Zolotas, Argyrios and Wang, Jun and Goodall, Roger M. (2008) Reduced-order robust tilt control design for high-speed railway vehicles. Vehicle System Dynamics, 46 (Sup 1). pp. 995-1011. ISSN 0042-3114
Mancini, Mauro and Locatelli, Giorgio and Sainati, Tristano (2015) The divergence between actual and estimated costs in large industrial and infrastructure projects: is nuclear special? In: Nuclear new build: insights into financing and project management. Nuclear Energy Agency, pp. 177-188. ISBN UNSPECIFIED
Agbonzikilo, Festus and Owen, Ieuan and Sadasivuni, Suresh Kumar and Bickerton, Ronald A. (2015) Investigation of flow aerodynamics for optimal fuel placement and mixing in the radial swirler slot of a dry low emission gas turbine combustion chamber. In: ASME Turbo Expo 2015, 15-19 June 2015, Montrèal, Canada.
Agbonzikilo, Festus and Stewart, Jill and Sadasivuni, Suresh Kumar and Owen, Ieuan and Riley, Mike and Sanderson, Victoria (2014) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. In: ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany.
Alwi, H. and Zolotas, Argyrios and Edwards, C. and Grigoriadis, K. (2012) Sliding mode control design of an electrostatic microactuator using LPV schemes. In: 2012 American Control Conference (ACC), 27-29 June 2012, Montreal, QC, Canada.
Aris, Mohd S. and Owen, Ieuan and Sutcliffe, Chris J. (2007) The application of shape memory alloy as vortex generators and flow control devices for enhanced convective heat transfer. In: 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007, July 30–August 2, 2007, San Diego, California, USA.
Aris, Mohd S. and Owen, Ieuan and Sutcliffe, Chris J. (2008) The development of active flow control devices from shape memory alloys for the convective cooling of heated surfaces. In: ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, 31 October 2008 - 6 November 2008;, Boston, Massachusetts, USA.
Avdic, Dalila and Gallimore, Michael and Riley, Mike and Bingham, Chris (2015) Neutrophil count prediction for personalized drug dosing in childhood cancer patients receiving 6-mercaptopurine chemotherapy treatment. In: International Conference on Medical and Health Sciences, 13th June 2015, Berlin, Germany.
Borman, Alexander and Seddon, Dick and Dowding, Colin and Griffiths, Jonathan David (2015) Variable Effects Initiator. In: MCM ITP 2015, 21st - 22nd October 2015, Brighton, UK.
Carty, S. and Owen, I. and Bastow, B. and Steen, W. M. (1994) Powder flow from novel nozzle design for laser cladding and alloying. In: 1994 Conference on Lasers and Electro-Optics Europe, 28 August - 2 September 1994, RAI Congress Centre, Amsterdam, The Netherlands.
Clifford, Mike and Gadd, Elizabeth and Coombs, Jenny and Hollier, Carol and Franklin, Ginny and McCormick, Karen and Maynard, Paul and Willmot, Peter and FitzGerald, Maurice (2012) Engaging the disengaged indefinitely, and with no budget: creating a sustainable model for student library ambassadors. In: 4th International Symposiumfor Engineering Education, July 2012, The University of Sheffield.
Deliparaschos, K .M. and Michail, K. and Tzafestas, S. G. and Zolotas, Argyrios (2013) Optimised sensor selection for control: a Hardware-in-the-loop realization on FPGA for an EMS system. In: Control and Fault-Tolerant Systems (SysTol), 2013 Conference on, 9-11 October 2013, Nice, France.
Demetlika, Paolo and Fenu, Gianfranco and Romano, Fulvio and Paoli, Andrea and Cicognani, Luca (2012) Safety critical supervision for steel industry robotic applications. In: Emerging Technologies & Factory Automation (ETFA), 2012 IEEE 17th Conference on, 17-21 Sept 2012, Krakow.
Dowding, Colin and Lawrence, Jonathan and Stewart, Paul (2011) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. In: ICMAT2011 International Conference on Materials for Advanced Technologies, 26 Jun - 1 Jul 2011, Suntec, Singapore.
Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Towards controlled 3D laser forming. In: MATADOR 2010, 14 – 16th July 2010, Manchester.
Effendy, M. and Yao, Y. and Yao, J. (2013) Comparison study of turbine blade with trailing-edge cutback coolant ejection designs. In: 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 7-10 January 2013, Grapevine, TX.
Forrest, J. S. and KÃ¤Ã¤riÃ¤, C. H. and Owen, I. (2010) Determining the impact of hangar-edge modifications on ship-helicopter operations using offline and piloted helicopter flight simulation. In: Conference of 66th Forum of the American Helicopter Society: "Rising to New Heights in Vertical Lift Technology", AHS Forum 66, 11 - 13 May 2010, Phoenix, Arizona.
Forrest, James S. and Hodge, Steven J. and Owen, Ieuan and Padfield, Gareth D. (2008) Towards fully simulated ship-helicopter operating limits: the importance of ship airwake fidelity. In: 64th Annual Forum - AHS International, 29 April 2008 - 1 May 2008, Montreal, Canada.
Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.
Gallimore, Michael and Riley, Mike and Bingham, Chris and Yang, Zhijing and Zhang, Yu (2013) Intelligent diagnostics and prognostics for industrial machines using an optimization approach. In: 4th International Conference on Integrity, Reliability & Failure, 23-27 June 2013, Funchal, Portugal.
Gentili, L. and Paoli, A. and Bonivento, C. (2006) An internal model approach to implicit fault tolerant control for port-Hamiltonian systems. In: 3rd IFAC Workshop on Lagrangian and Hamiltonian Methods in Nonlinear Control, 19 - 21 July 2006, Nagoya; Japan.
Gladwin, Dan and Stewart, Paul and Stewart, Jill and Chen, Rui and Winward, Edward (2008) A decision support methodology for process in the loop optimisation. In: CS/IEEE International Workshop on Modelling and Applied Simulation 2008, September 17-19, 2008, Calabria, Italy.
Gordon, T. J. (2009) Nonlinear crossover model of vehicle directional control. In: American Control Conference, St. Louis, MO, 10-12 June 2009.
Griffiths, Jonathan David and Dowding, Colin and Riley, Mike and Bickerton, Ronald (2015) Gas turbine laser ignition via solid core optical fiber? A photon flux density approach. In: Laser Ignition Conference, 27-30 April, Argonne, Illinois United States.
Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2009) Finite element modelling of the laser forming of AISI 1010 steel. In: MATADOR 2010, 14 – 16th July 2010, Manchester.
Griffiths, Jonathan David and Lawrence, Jonathan (2012) Laser cleaning of the output window in a laser ignition system for gas turbines. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.
Griffiths, Jonathan David and Lawrence, Jonathan (2012) Transmissive optic system for manipulation of ignition location in laser ignition for gas turbines. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.
Jayne, Chrisina and Yue, Shigang and Iliadis, Lazaros (2012) Engineering Applications of Neural Networks: 13th International Conference, EANN 2012 London, UK, September 20-23, 2012 Proceedings. In: 13th International Conference, EANN 2012, 20 - 23 September 2012, London, UK.
Kharrazi, S. and Gordon, T. and Lidberg, M. (2012) Improving lateral performance of longer combination vehicles: an approach based on eigenstructure assignment. In: Intelligent Vehicles Symposium (IV), 2012, 3-7 June 2012, Alcala de Henares.
Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.
Lawrence, Jonathan (2012) Surface glazing of concrete using lasers for protection and decommissioning. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.
Li, Zhenhai and Zolotas, Argyrios and Jaimoukha, Imad and Grigoriadis, Karolos (2008) Output selection with fault tolerance via dynamic controller design. In: Ifac World Congress, July 2008, Seoul, Korea.
Locatelli, Giorgio and Mancini, Mauro and Ruiz, Felipe and Solana, Pablo (2012) Using real options to evaluate the flexibility in the deployment of SMR. In: International Congress on Advances in Nuclear Power Plants 2012, 24 - 28 June 2012 , Chicago, IL.
Matayoshi, N. and Forrest, J. S. and Hodge, S. J. and Padfield, G. D. and Owen, I. (2009) Relationship between pilot workload and turbulence intensity for helicopter operations in harsh environments. In: Conference of 65th Annual Forum Proceedings - AHS Internationa, 27 - 29 May 2009, Grapevine, Texas.
Michail, Konstantinos and Deliparaschos, Kyriakos M. and Tzafestas, Spyros G. and Zolotas, Argyrios (2013) AI-based low computational power actuator/sensor fault detection applied on a MAGLEV suspension. In: 2013 21st Mediterranean Conference on Control Automation (MED), 25-28 June 2013, Chania, Crete.
Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger (2013) Optimised sensor selection for control and fault tolerance: comparison and some new results. In: 2013 21st Mediterranean Conference on Control Automation (MED), 25-28 June 2013, Chania, Crete.
Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger (2011) Simulation-based optimum sensor selection design for an uncertain EMS system via Monte-Carlo technique. In: 18th IFAC WC 2011, 28th August - 2nd September 2011, Università Cattolica del Sacro Cuore, Milano, Italy.
Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.
Mosavi, A. A. and Mitra, M. and Van Der Linden, G. W. and Gordon, T. and Sedarat, H. and Emami-Naeini, A. and Jacob, V. and Krimotat, A. and Gilbert, M. and Lynch, J. (2012) Nonlinear modeling of the vehicle/structure interaction on a skewed highway bridge using an iterative uncoupled approach. In: Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security, March 11, 2012, San Diego, California.
Nandakumar, R. and Halikias, G. D. and Zolotas, A. (2002) An optimisation algorithm for designing fixed-structure controllers using the QFT method. In: Computer Aided Control System Design, 2002 IEEE International Symposium on, 18th - 22nd September 2002.
Nandakumar, R. and Halikias, G. D. and Zolotas, Argyrios (2003) A new educational software tool for robust control design using the QFT method. In: 42nd IEEE Conference on Decision and Control, December 2003, Maui, Hawaii, USA.
Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.
Okhuahesogie, Famous and Stewart, Jill and Riley, Mike and Heyes, Frank and Roach, Paul (2014) A 1-D analytical code for the design and multi-objective optimisation of high-pressure compressors within two-stage turbochargers for marine applications. In: 11th International Conference on Turbochargers and Turbocharging, 13-14 May 2014, London.
Owen, I. and Amini, A. (1995) Study of hydraulic impacts in steam plant. In: 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, 13 - 18 August 1995, Hilton Head, South Carolina.
Owen, I. and Amini, A. (1997) Use of critical flow Venturi nozzles with steam. In: 1997 ASME Fluids Engineering Division Summer Meeting, FEDSM'97, 22 - 26 June 1997, Vancouver, British Columbia, Canada..
Owen, I. and Fyrippi, I. and Escudier, M. P. (2003) Flowmetering of shear-thinning non-Newtonian liquids. In: 4th ASME/JSME Joint Fluids Engineering Conference, 6 - 10 July 2003, Honolulu, Hawaii.
Owen, I. and Gray, J. D. and Escudier, M. P. (2003) PIV measurements in large-scale cardiovascular models: the importance of dynamic scaling. In: 1st International Conference on Optical and Laser Diagnostic, 16 - 20 December 2002, London.
Owen, I. and Madadnia, J. (1995) Valve erosion in cavitating particulate-laden flows. In: 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, 13 - 18 August 1995, Hilton Head, South Carolina.
Owen, Ieuan (1985) Diffusion of aerosols onto a heated turbine blade. In: International Symposium Workshop on Particulate and Multiphase Processes, April 22-26, 1985, Miami, Florida.
Prithwani, Indra and Otto, Andreas and Scmidt, Michael and Griffiths, Jonathan David and Watkins, Ken and Edwardson, Stuart and Dearden, Geoff (2009) Laser beam forming of aluminium plates under application of moving mesh and adapted heat source. In: Lasers in Manufacturing 2009, 15 - 18 June 2009, Munich.
Rantanen, Ray and Gordon, Timothy (1994) Integrated spacecraft environments model (ISEM). In: 4th International Conference on Engineering, Construction, and Operations in Space, 26 February - 3 March 1994, Albuquerque, NM, USA.
Rantanen, Raymond and Gordon, Tim and Finckenor, Miria M. and Pippin, Harold G. (1998) Comparison of contamination model predictions to LDEF surface measurements. In: Optical Systems Contamination and Degradation, July 19, 1998, San Diego, CA.
Riley, Mike and Dunning, Peter D. and Brampton, Christopher J. and Kim, H. Alicia (2014) Multi-objective robust topology optimization with dynamic weighting. In: International Conference on Engineering and Applied Sciences Optimization , 4-6 June 2014, Kos, Greece.
Riley, Mike J. W. and Gallimore, Michael and Bingham, Chris and Stewart, Jill (2013) Gas turbine health classification using a hybridized optimization algorithm. In: 4th International Conference on Integrity, Reliability & Failure, 23-27 June 2013, Funchal, Portugal.
Vilalta-perdomo, Eliseo Luis (2015) Configuraciones para el abastecimiento sustentable de alimentos. In: I Congreso Internacional de Ingeniería: Aporte de la Ingeniería al Desarrollo Sostenible del Perú, 9-13 November 2015, Universidad Privada Antenor Orrego, Trujillo, Peru.
Vilalta-perdomo, Eliseo Luis and Corliss, John (2012) Hot topics for sustainability in the industrial engineering research agenda. In: 62nd IIE Annual Conference and Expo 2012, 19 May - 23 May 2012, Orlando, FL.
Wang, Y. and White, M. and Owen, I. and Hodge, S. and Barakos, G. (2012) Effects of visual and motion cues in flight simulation of ship borne helicopter operations. In: Conference of 38th European Rotorcraft Forum 2012, ERF 2012, 4 - 7 September 2012, Amsterdam.
Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2013) H-infinity based control system and its digital implementation for the integrated tilt with active lateral secondary suspensions in high speed trains. In: Control Conference (CCC), 2013 32nd Chinese, 26-28 July 2013, Xi’an, China.
Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.
Zolotas, Argyrios (2002) Advanced control strategies for tilting trains. PhD thesis, Loughborough University.
Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.
Allinson, Nigel (2015) PRaVDA: Proton Radiotherapy Verification and Dosimetry Applications. [Project]