Items where Subject is "G160 Engineering/Industrial Mathematics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Jump to: D | H | L | M | P | R | S | Z
Number of items at this level: 22.


Das, A, McIlroy, Claire and Bortner, M (2020) Advances in modeling transport phenomena in material-extrusion additivemanufacturing: Coupling momentum, heat, and mass transfer. Progress in Additive Manufacturing . ISSN 2363-9512


Hebda, Michael, McIlroy, Claire, Whiteside, Ben, Caton-Rose, Fin and Coates, Phil (2019) A method for predicting geometric characteristics of polymer deposition during fused-filament-fabrication. Additive Manufacturing, 27 . pp. 99-108. ISSN 2214-8604

Huang, Jianfeng, Chen, Guohua, Shu, Lei, Wang, Shihua and Zhang, Yu (2016) An experimental study of clogging fault diagnosis in heat exchangers based on vibration signals. IEEE Access, 4 . pp. 1800-1809. ISSN 2169-3536


Li, Haiyang, Peng, Jigen and Yue, Shigang (2015) The sparsity of underdetermined linear system via lp minimization for 0 < p < 1. Mathematical Problems in Engineering, 2015 . ISSN 1024-123X


Maleki, Sepehr, Bingham, Chris and Zhang, Yu (2015) An online changepoint detection algorithm for highly correlated data. In: 3rd International Conference on Advances in Information Processing and Communication Technology - IPCT, 10 - 11 Dec 2015, Rome, Italy.

Maleki, Sepehr, Rapisarda, Paolo and Rogers, Eric (2015) Failure identification for linear repetitive processes. Multidimensional Systems and Signal Processing . ISSN 0923-6082

McIlroy, Claire (2019) A fundamental rule: determining the importance of flow prior to polymer crystallization. Physics of Fluids, 31 . p. 113103. ISSN 1070-6631

McIlroy, Claire and Graham, R.S. (2018) Modelling flow-enhanced crystallisation during fused filament fabrication of semi-crystalline polymer melts. Additive Manufacturing, 24 . pp. 323-340. ISSN 2214-8604

McIlroy, Claire, Harlen, O.G. and Morrison, N.F. (2013) Modelling the jetting of dilute polymer solutions in drop-on-demand inkjet printing. Journal of Non-Newtonian Fluid Mechanics, 201 . pp. 17-28. ISSN 0377-0257

McIlroy, Claire and Harlen, Oliver G. (2019) Effects of drive amplitude on continuous jet break-up. Physics of Fluids, 31 (6). 064104. ISSN 1070-6631

McIlroy, Claire and Olmsted, P.D. (2017) Disentanglement effects on welding behaviour of polymer melts during the fused-filament-fabrication method for additive manufacturing. Polymer, 123 . pp. 376-391. ISSN 0032-3861

McIlroy, Claire and Olmsted, Peter D. (2017) Deformation of an amorphous polymer during the fused-filament-fabrication method for additive manufacturing. Journal of Rheology, 61 (2). pp. 379-397. ISSN 0148-6055

McIlroy, Claire, Seppala, Jonathan E. and Kotula, Anthony P. (2019) Combining Modeling and Measurements To Predict Crystal Morphology in Material Extrusion. In: Polymer-Based Additive Manufacturing: Recent Developments. American Chemical Society, pp. 85-113. ISBN 9780841234260, 9780841234253

Morrison, Neil F., McIlroy, Claire and Harlen, Oliver G. (2015) Jetting Simulations. In: Fundamentals of Inkjet Printing. Wiley, pp. 169-198. ISBN UNSPECIFIED

Mudbhatkal, Amogh and Mahesha, Amai (2018) Bias correction methods for hydrologic impact studies over India’s Western Ghat basins. Journal of Hydrologic Engineering, 23 (2). 05017030-1. ISSN 1084-0699

Mystkowski, Arkadiusz and Zolotas, Argyrios (2018) PLC-BASED DISCRETE FRACTIONAL-ORDER CONTROL DESIGN FOR AN INDUSTRIAL-ORIENTED WATER TANK VOLUME SYSTEM WITH INPUT DELAY. Fractional Calculus & Applied Analysis, 21 (4). pp. 1005-1026. ISSN 1311-0454


Peachey, T. C., Riley, M. J. W., Abramson, D. and Stewart, J. (2012) A simplex-like search method for bi-objective optimization. In: International Conference on Engineering Optimization, 1-5 July 2012, Rio de Janeiro, Brazil.

Pu, J, McIlroy, Claire, Jones, A and Ashcroft, I (2020) Understanding Mechanical Properties in Fused Filament Fabrication of Polyether Ether Ketone. Additive Manufacturing . ISSN 2214-8604


Riley, Mike J. W., Peachey, Tom, Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981


Sorour, Mohamed, Elgeneidy, Khaled, Srinivasan, Aravinda and Hanheide, Marc (2019) Grasping Unknown Objects Based on Gripper Workspace Spheres. In: 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).


Zahidi, Usman A., Yuen, Peter W. T., Piper, Jonathan and Godfree, Peter S. (2019) An End-to-End Hyperspectral Scene Simulator with Alternate Adjacency Effect Models and Its Comparison with CameoSim. Remote Sensing, 12 (1). p. 74. ISSN 2072-4292

Zhang, Yu, Bingham, Chris, Gallimore, Michael, Yang, Zhijing and Chen, Jun (2013) Machine fault detection during transient operation using measurement denoising. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 15-17 July 2013, Milan, Italy.

This list was generated on Sat Sep 25 00:31:18 2021 BST.