Up a level |

- JACS Subject (12112)
- G Mathematical and Computer Sciences (1148)
**G150 Mathematical Modelling**(15)

- G Mathematical and Computer Sciences (1148)

Actuators Bond Graph Buildings Classical control Cyclic iterative algorithm Domestic Electric appliances Experimental decision support External sources Fault tolerance Flight simulation Fluid-filled Genetic Algorithms Gradient descent Hall Effect Encoder Hardware in the loop Heat emitters Heating control Heating efficiencies Hybrid Bond Graph Hybrid Bond Graph. Hybrid Model Input power Linear matrix equations Mathematical Modelling Mechatronics Metamodelling Model predictive Model predictive control Modelling techniques Models, Predictive control systems, control system Modern control Multi-disciplinary Multi-physics On-line modelling PWM power converters Parameter matching Permanent Magnet AC Motor Physical Model Physical system models QCA computing Reducing systems Response Surfaces Set-point tracking Simscape Simulated annealing Simulink Simultaneous iterative algorithm State Observer Switched Bond Graph Test cell Thermodynamic behaviour Variable neighbourhood search Weather data, Apartment houses accuracy aircraft bayesian networks block diagram bond graph bond-graph building design causality computer models computer simulation contact control control engineering controlled element controlled junction decision support discrete event simulation dynamic causality energy efficient heating hybrid hybrid bond graphs idealised physical modelling infectious diseases junction structure mathematical modeling mathematical modelling mechatronics mixed-Boolean modeling networks nonsmooth dynamics numerical model policy modelling population based intervention power electronics prediction probabilistic computing public health policy quantum-dot cellular automata redundancy resititution rules of thumb scale-free simulation tools state space structural analysis switched bond graphs temperature

Number of items at this level: **109**.

Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios
(2010)
*Modelling and control of a high redundancy actuator.*
Mechatronics, 20
(1).
102 - 112.
ISSN 0957-4158

Margetts, Rebecca and Ngwompo, Roger F. and Fortes da Cruz, Marcelin
(2013)
*Modelling a drop test of a landing gear using a hybrid bond graph.*
In: MIC 2013, February 2013, Innsbruck, Austria.

Rogers, D. and Foster, M. and Bingham, C.
(2013)
*A recursive modelling technique applied to the model predictive control of fluid filled heat emitters.*
Building and Environment, 62
.
pp. 33-44.
ISSN 0360-1323

Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios
(2010)
*Modelling and control of a high redundancy actuator.*
Mechatronics, 20
(1).
102 - 112.
ISSN 0957-4158

Tang, Yuchao and Peng, Jigen and Yue, Shigang
(2014)
*Cyclic and simultaneous iterative methods to matrix equations of the form AiX Bi = Fi.*
Numerical Algorithms, 66
(2).
pp. 379-397.
ISSN 1017-1398

Rogers, D. and Foster, M. and Bingham, C.
(2013)
*A recursive modelling technique applied to the model predictive control of fluid filled heat emitters.*
Building and Environment, 62
.
pp. 33-44.
ISSN 0360-1323

Rogers, D. and Foster, M. and Bingham, C.
(2013)
*A recursive modelling technique applied to the model predictive control of fluid filled heat emitters.*
Building and Environment, 62
.
pp. 33-44.
ISSN 0360-1323

Gladwin, D. and Stewart, P. and Stewart, J. and Chen, R. and Winward, E.
(2010)
*Improved decision support for engine-in-the-loop experimental design optimization.*
Proceedings of the IMechE, Part D: Automobile Engineering, 224
(2).
pp. 201-218.
ISSN 0954-4070

Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios
(2010)
*Modelling and control of a high redundancy actuator.*
Mechatronics, 20
(1).
102 - 112.
ISSN 0957-4158

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A.
(2003)
*Metamodelling of multivariable engine models for real-time flight simulation.*
In: 9th CEAS European Propulsion Forum, 15-17 October, 2003, Rome, Italy.

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A.
(2003)
*Metamodelling of multivariable engine models for real-time flight simulation.*
In: 9th CEAS European Propulsion Forum, 15-17 October, 2003, Rome, Italy.

Gladwin, D. and Stewart, P. and Stewart, J. and Chen, R. and Winward, E.
(2010)
*Improved decision support for engine-in-the-loop experimental design optimization.*
Proceedings of the IMechE, Part D: Automobile Engineering, 224
(2).
pp. 201-218.
ISSN 0954-4070

Stewart, Paul and Kadirkamanathan, V.
(2003)
*Commutation of permanent-magnet synchronous AC motors for military and traction applications.*
IEEE Transactions on Industrial Electronics, 50
(3).
pp. 629-631.
ISSN 0278-0046

Gladwin, D. and Stewart, P. and Stewart, J. and Chen, R. and Winward, E.
(2010)
*Improved decision support for engine-in-the-loop experimental design optimization.*
Proceedings of the IMechE, Part D: Automobile Engineering, 224
(2).
pp. 201-218.
ISSN 0954-4070

Margetts, Rebecca
(2013)
*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Margetts, Rebecca and Ngwompo, Roger F.
(2014)
*Hybrid bond graphs for contact, using controlled junctions and dynamic causality.*
In: 2014 International Conference on Bond Graph Modeling and Simulation, ICBGM 2014, Part of the 2014 Summer Simulation Multiconference, SummerSim 2014, 6 - 10 July 2014, Monterey, CA; United States.

Margetts, Rebecca and Ngwompo, Roger F. and Fortes da Cruz, Marcelin
(2013)
*Modelling a drop test of a landing gear using a hybrid bond graph.*
In: MIC 2013, February 2013, Innsbruck, Austria.

Margetts, Rebecca and Ngwompo, Roger F.
(2014)
*Hybrid bond graphs for contact, using controlled junctions and dynamic causality.*
In: 2014 International Conference on Bond Graph Modeling and Simulation, ICBGM 2014, Part of the 2014 Summer Simulation Multiconference, SummerSim 2014, 6 - 10 July 2014, Monterey, CA; United States.

Margetts, Rebecca and Ngwompo, Roger F. and Fortes da Cruz, Marcelin
(2013)
*Modelling a drop test of a landing gear using a hybrid bond graph.*
In: MIC 2013, February 2013, Innsbruck, Austria.

Tang, Yuchao and Peng, Jigen and Yue, Shigang
(2014)
*Cyclic and simultaneous iterative methods to matrix equations of the form AiX Bi = Fi.*
Numerical Algorithms, 66
(2).
pp. 379-397.
ISSN 1017-1398

Ainsworth, J. D. and Carruthers, E. and Crouch, P. and Green, N. and O'Flaherty, M. and Sperrin, M. and Williams, R. and Asghar, Zahid and Capewell, S. and Buchan, I. E.
(2011)
*IMPACT: a generic tool for modelling and simulating public health policy.*
Methods of Information in Medicine, 50
(5).
pp. 454-463.
ISSN 0026-1270

Margetts, Rebecca
(2013)
*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A.
(2003)
*Metamodelling of multivariable engine models for real-time flight simulation.*
In: 9th CEAS European Propulsion Forum, 15-17 October, 2003, Rome, Italy.

Margetts, Rebecca
(2013)
*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Stewart, Paul and Kadirkamanathan, V.
(2003)
*Commutation of permanent-magnet synchronous AC motors for military and traction applications.*
IEEE Transactions on Industrial Electronics, 50
(3).
pp. 629-631.
ISSN 0278-0046

*Modelling a drop test of a landing gear using a hybrid bond graph.*
In: MIC 2013, February 2013, Innsbruck, Austria.

Margetts, Rebecca and Ngwompo, Roger F. and Fortes da Cruz, Marcelin
(2013)
*Construction and analysis of causally dynamic hybrid bond graphs.*
Proceedings of the Institution of Mechanical Engineers Part I – Journal of Systems and Control Engineering, 227
(3).
pp. 329-346.
ISSN 0959-6518

Bhanja, Sanjukta and Srivastava, Saket
(2005)
*Bayesian modeling of quantum-dot-cellular-automata circuits.*
In: NSTI Nanotechnology Conference 2005e, 8 - 12 May 2005, Anaheim.

*Metamodelling of multivariable engine models for real-time flight simulation.*
In: 9th CEAS European Propulsion Forum, 15-17 October, 2003, Rome, Italy.

Margetts, Rebecca and Ngwompo, Roger F.
(2010)
*Comparison of modeling techniques for a landing gear.*
In: ASME IMECE 2010, November 2010, Vancouver, Canada.

*Improved decision support for engine-in-the-loop experimental design optimization.*
Proceedings of the IMechE, Part D: Automobile Engineering, 224
(2).
pp. 201-218.
ISSN 0954-4070

Margetts, Rebecca and Ngwompo, Roger F.
(2010)
*Comparison of modeling techniques for a landing gear.*
In: ASME IMECE 2010, November 2010, Vancouver, Canada.

Tang, Yuchao and Peng, Jigen and Yue, Shigang
(2014)
*Cyclic and simultaneous iterative methods to matrix equations of the form AiX Bi = Fi.*
Numerical Algorithms, 66
(2).
pp. 379-397.
ISSN 1017-1398

Stewart, Paul and Kadirkamanathan, V.
(2003)
*Commutation of permanent-magnet synchronous AC motors for military and traction applications.*
IEEE Transactions on Industrial Electronics, 50
(3).
pp. 629-631.
ISSN 0278-0046

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Improved decision support for engine-in-the-loop experimental design optimization.*
Proceedings of the IMechE, Part D: Automobile Engineering, 224
(2).
pp. 201-218.
ISSN 0954-4070

Byrd, Hugh
(1994)
*The limitations of computer models intended to aid energy efficient design of buildings.*
In: Building Environmental Performance, facing the future, 6-8 April, York, UK.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Bhanja, Sanjukta and Srivastava, Saket
(2005)
*Bayesian modeling of quantum-dot-cellular-automata circuits.*
In: NSTI Nanotechnology Conference 2005e, 8 - 12 May 2005, Anaheim.

Margetts, Rebecca and Ngwompo, Roger F.
(2010)
*Comparison of modeling techniques for a landing gear.*
In: ASME IMECE 2010, November 2010, Vancouver, Canada.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Comparison of modeling techniques for a landing gear.*
In: ASME IMECE 2010, November 2010, Vancouver, Canada.

Margetts, Rebecca and Ngwompo, Roger F.
(2014)
*Hybrid bond graphs for contact, using controlled junctions and dynamic causality.*
In: 2014 International Conference on Bond Graph Modeling and Simulation, ICBGM 2014, Part of the 2014 Summer Simulation Multiconference, SummerSim 2014, 6 - 10 July 2014, Monterey, CA; United States.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Byrd, Hugh
(1994)
*The limitations of computer models intended to aid energy efficient design of buildings.*
In: Building Environmental Performance, facing the future, 6-8 April, York, UK.

Margetts, Rebecca and Ngwompo, Roger F. and Fortes da Cruz, Marcelin
(2013)
*Construction and analysis of causally dynamic hybrid bond graphs.*
Proceedings of the Institution of Mechanical Engineers Part I – Journal of Systems and Control Engineering, 227
(3).
pp. 329-346.
ISSN 0959-6518

Byrd, Hugh
(1994)
*The limitations of computer models intended to aid energy efficient design of buildings.*
In: Building Environmental Performance, facing the future, 6-8 April, York, UK.

Ainsworth, J. D. and Carruthers, E. and Crouch, P. and Green, N. and O'Flaherty, M. and Sperrin, M. and Williams, R. and Asghar, Zahid and Capewell, S. and Buchan, I. E.
(2011)
*IMPACT: a generic tool for modelling and simulating public health policy.*
Methods of Information in Medicine, 50
(5).
pp. 454-463.
ISSN 0026-1270

*Hybrid bond graphs for contact, using controlled junctions and dynamic causality.*
In: 2014 International Conference on Bond Graph Modeling and Simulation, ICBGM 2014, Part of the 2014 Summer Simulation Multiconference, SummerSim 2014, 6 - 10 July 2014, Monterey, CA; United States.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Margetts, Rebecca and Ngwompo, Roger F. and Fortes da Cruz, Marcelin
(2013)
*Construction and analysis of causally dynamic hybrid bond graphs.*
Proceedings of the Institution of Mechanical Engineers Part I – Journal of Systems and Control Engineering, 227
(3).
pp. 329-346.
ISSN 0959-6518

*Comparison of modeling techniques for a landing gear.*
In: ASME IMECE 2010, November 2010, Vancouver, Canada.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Ainsworth, J. D. and Carruthers, E. and Crouch, P. and Green, N. and O'Flaherty, M. and Sperrin, M. and Williams, R. and Asghar, Zahid and Capewell, S. and Buchan, I. E.
(2011)
*IMPACT: a generic tool for modelling and simulating public health policy.*
Methods of Information in Medicine, 50
(5).
pp. 454-463.
ISSN 0026-1270

*IMPACT: a generic tool for modelling and simulating public health policy.*
Methods of Information in Medicine, 50
(5).
pp. 454-463.
ISSN 0026-1270

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*The limitations of computer models intended to aid energy efficient design of buildings.*
In: Building Environmental Performance, facing the future, 6-8 April, York, UK.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Construction and analysis of causally dynamic hybrid bond graphs.*
Proceedings of the Institution of Mechanical Engineers Part I – Journal of Systems and Control Engineering, 227
(3).
pp. 329-346.
ISSN 0959-6518

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Comparison of modeling techniques for a landing gear.*
In: ASME IMECE 2010, November 2010, Vancouver, Canada.

Boily, M. C. and Asghar, Z. and Garske, T. and Ghani, A. and Poulin, R.
(2007)
*Influence of selected formation rules for finite population networks with fixed macrostructures: implications for individual-based model of infectious diseases.*
Mathematical Population Studies: An International Journal of Mathematical Demography, 14
(4).
pp. 237-267.
ISSN 0889-8480

*Construction and analysis of causally dynamic hybrid bond graphs.*
Proceedings of the Institution of Mechanical Engineers Part I – Journal of Systems and Control Engineering, 227
(3).
pp. 329-346.
ISSN 0959-6518

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Comparison of modeling techniques for a landing gear.*
In: ASME IMECE 2010, November 2010, Vancouver, Canada.

*Modelling and control of a high redundancy actuator.*
Mechatronics, 20
(1).
102 - 112.
ISSN 0957-4158

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Boily, M. C. and Asghar, Z. and Garske, T. and Ghani, A. and Poulin, R.
(2007)
*Influence of selected formation rules for finite population networks with fixed macrostructures: implications for individual-based model of infectious diseases.*
Mathematical Population Studies: An International Journal of Mathematical Demography, 14
(4).
pp. 237-267.
ISSN 0889-8480

*Hybrid bond graphs for contact, using controlled junctions and dynamic causality.*
In: 2014 International Conference on Bond Graph Modeling and Simulation, ICBGM 2014, Part of the 2014 Summer Simulation Multiconference, SummerSim 2014, 6 - 10 July 2014, Monterey, CA; United States.

*IMPACT: a generic tool for modelling and simulating public health policy.*
Methods of Information in Medicine, 50
(5).
pp. 454-463.
ISSN 0026-1270

*IMPACT: a generic tool for modelling and simulating public health policy.*
Methods of Information in Medicine, 50
(5).
pp. 454-463.
ISSN 0026-1270

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

Bhanja, Sanjukta and Srivastava, Saket
(2005)
*Bayesian modeling of quantum-dot-cellular-automata circuits.*
In: NSTI Nanotechnology Conference 2005e, 8 - 12 May 2005, Anaheim.

*IMPACT: a generic tool for modelling and simulating public health policy.*
Methods of Information in Medicine, 50
(5).
pp. 454-463.
ISSN 0026-1270

*Bayesian modeling of quantum-dot-cellular-automata circuits.*
In: NSTI Nanotechnology Conference 2005e, 8 - 12 May 2005, Anaheim.

*Modelling and control of a high redundancy actuator.*
Mechatronics, 20
(1).
102 - 112.
ISSN 0957-4158

*Hybrid bond graphs for contact, using controlled junctions and dynamic causality.*
In: 2014 International Conference on Bond Graph Modeling and Simulation, ICBGM 2014, Part of the 2014 Summer Simulation Multiconference, SummerSim 2014, 6 - 10 July 2014, Monterey, CA; United States.

*The limitations of computer models intended to aid energy efficient design of buildings.*
In: Building Environmental Performance, facing the future, 6-8 April, York, UK.

Boily, M. C. and Asghar, Z. and Garske, T. and Ghani, A. and Poulin, R.
(2007)
*Influence of selected formation rules for finite population networks with fixed macrostructures: implications for individual-based model of infectious diseases.*
Mathematical Population Studies: An International Journal of Mathematical Demography, 14
(4).
pp. 237-267.
ISSN 0889-8480

*Comparison of modeling techniques for a landing gear.*
In: ASME IMECE 2010, November 2010, Vancouver, Canada.

*Modelling & analysis of hybrid dynamic systems using a bond graph approach.*
PhD thesis, University of Bath.

*Construction and analysis of causally dynamic hybrid bond graphs.*
Proceedings of the Institution of Mechanical Engineers Part I – Journal of Systems and Control Engineering, 227
(3).
pp. 329-346.
ISSN 0959-6518

*Construction and analysis of causally dynamic hybrid bond graphs.*
Proceedings of the Institution of Mechanical Engineers Part I – Journal of Systems and Control Engineering, 227
(3).
pp. 329-346.
ISSN 0959-6518