Items where Subject is "F Physical Sciences > F361 Laser Physics"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Ablation Ablation Rate Ablation Threshold Binary optics Bisphenol A Polycarbonate Brightness CO2 Laser CO2 laser Ceramics Characterization Closed Liquid Immersion Composition Compositional characterization Cracking Cytoskeleton Debris Control Diffractive optical element Diffractive optics Engineering Ceramics Etch Rate Excimer Feature Excimer laser F2 laser FEM Fibre Laser Fibre Laser surface treatment Fibre laser Fibre lasers Finite Element Modelling (FEM) Flow Velocity Food Packaging Cans Force spectroscopy Fracture Toughness (K1c) Fracture Toughness (K1c) Engineering ceramic Fracture toughness (K1c) Hardness High Speed Laser welding High Speed Welding Instrumentation measurement and metrology K1C KrF excimer laser Laguerre-Gaussian beams Laser Laser Beam Brightness Laser Processing Laser Surface Engineering Laser Surface Treatment Laser beam shaping Laser forming (LF) Laser surface treatment Lasers Liquid Chemistry Liquid Immersion Low-index particles Microscopy Microstructure Open Thin Film Open Thin Film Liquid Immersion Optical confinement and manipulation Optical manipulation Optical tweezers Orbital angular momentum of light Osteoblast cells PMMA Peening Phase Tranformation Phase Transformation Plume Distortion Process Parameters Processing Quality Radiance (Brightness) Residual stress SBF SBF. Shock Processing Shot Si3N4 engineering ceramic SiO2 Silicon Nitride Silicon nitride Spatial light modulators Steady State FEA Surface Treatment Surface modification Technical Technical Ceramics Temperature gradient mechanism (TGM) Thermal Analysis Thermal Shock Thin Film Liquid Immersion Tin-Plated Steels Tinplated steel Topograpghy Topographical Topography Trapping UCA Vortex Wettability X-ray diffraction Zirconia Ceramics ZrO2 ZrO2 engineering ceramics acoustic radiation pressure atmospheric conditions bioactivity bioactivity. biocompatibility biofunctionality biological implants biological techniques biomedical imaging biomembranes bmjanomaly bmjdoid bmjtype bubble-to-bubble interactions bubbles calcium phosphate formation cellular biophysics chemical chemical composition chemical map contact angle cytotoxicity debris control diffractive optical elements diffractive optics dorsal root ganglia engineering filopodia flow visualisation holographic optical tweezers lamellipodia laser laser beams laser surface treatment laser tweezers lipid bilayers material removal microbubble dynamics microbubbles nylon 6 6 nylon 66 optical manipulation optical trapping optical tweezers osteoblast cells phase contrast photonics processing gases radiation pressure regenerative medicine scanning microscopy secondary Bjerknes force simulated body fluid simulated body fluid (SBF) surface finish surface free energy surface treatment synchrotron radiation ultrasound contrast agents wave front engineering wettability wettability characteristics
Number of items at this level: 294.

Ablation

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Ablation Rate

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Ablation Threshold

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Binary optics

Moradi, Ali-Reza and Ferrari, Enrico and Garbin, Valeria and Di Fabrizio, Enzo and Cojoc, Dan (2007) Strength control in multiple optical traps generated by means of diffractive optical elements. Optoelectronics and Advanced Materials: Rapid Communications, 1 (4). pp. 158-161. ISSN UNSPECIFIED

Bisphenol A Polycarbonate

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Brightness

Shukla, Pratik and Lawrence, Jonathan (2012) The influence of brightness during laser surface treatment of Si3N4 engineering ceramics. Optics and Lasers in Engineering, 50 (12). pp. 1746-1751. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan and Paul, Anish (2012) Influence of laser beam brightness during laser surface treatment of ZrO2 engineering ceramics. Lasers in Engineering, 22 (3/4). pp. 151-173. ISSN 0898-1507

CO2 Laser

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

CO2 laser

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Shukla, Pratik and Lawrence, Jonathan (2012) A comparative study on the processing parameters during fibre and CO2 laser surface treatments of silicon nitride engineering ceramic. International Journal of Advanced Manufacturing Technology , 59 (1-4). pp. 143-155. ISSN 0268-3768

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

Waugh, David and Lawrence, Jonathan and Walton, C.D. and Zakaria, R.B. (2008) Investigation into the efficacy of CO2 lasers for modifying the factors influencing biocompatibility of a polymeric biomaterial in comparison with an F2 excimer laser. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Waugh, David and Lawrence, Peter (2008) Wettability characteristics variation of nylon 6,6 by means of CO2 laser generated surface patterns. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Ceramics

Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2014) Investigation of temperature distribution during CO2 and Fibre laser processing of Si3N4 engineering ceramic by means of a computational and experimental approach. Lasers In Engineering , 27 (3-4). pp. 135-160. ISSN 0898-1507

Shukla, Pratik and Lawrence, Jonathan (2013) Role of laser beam radiance in different ceramic processing: a two wavelengths comparison. Optics & Laser Technology, 54 . pp. 380-388. ISSN 0030-3992

Shukla, Pratik and Swanson, Philip and Page, Colin (2014) Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: a review. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Characterization

Shukla, Pratik (2014) Fibre laser-interaction of technical ceramics during laser surface engineering. In: Laser Surface Engineering. Woodhead Publishing. ISBN UNSPECIFIED (In Press)

Closed Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Composition

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Compositional characterization

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Cracking

Shukla, Pratik and Lawrence, Jonathan (2013) Evaluation of surface cracks following processing of a ZrO2 advance ceramic with CO2 and fibre laser radiation. Advances in Ceramic Science and Engineering (ACSE), 2 (4). pp. 141-150. ISSN 2325-6885

Cytoskeleton

Cojoc, Dan and Difato, Francesco and Ferrari, Enrico and Shahapure, Rajesh B. and Laishram, Jummi and Righi, Massimo and Di Fabrizio, Enzo and Torre, Vincent (2007) Properties of the force exerted by filopodia and lamellipodia and the involvement of cytoskeletal components. PLOS One, 2 (10). e1072. ISSN 1932-6203

Debris Control

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Diffractive optical element

Cojoc, Dan and Garbin, Valeria and Ferrari, Enrico and Businaro, Luca and Romanato, Filippo and Di Fabrizio, Enzo (2005) Laser trapping and micro-manipulation using optical vortices. Microelectronic Engineering, 78-79 . pp. 125-131. ISSN 0167-9317

Diffractive optics

Cojoc, Dan and Cabrini, Stefano and Ferrari, Enrico and Malureanu, Radu and Danailov, Miltcho Bojanov and Di Fabrizio, Enzo (2004) Dynamic multiple optical trapping by means of diffractive optical elements. Microelectronic Engineering, 73-74 . pp. 927-932. ISSN 0167-9317

Engineering Ceramics

Shukla, Pratik (2014) Fibre laser-interaction of technical ceramics during laser surface engineering. In: Laser Surface Engineering. Woodhead Publishing. ISBN UNSPECIFIED (In Press)

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

Etch Rate

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Excimer Feature

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Excimer laser

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

F2 laser

Waugh, David and Lawrence, Jonathan and Walton, C.D. and Zakaria, R.B. (2008) Investigation into the efficacy of CO2 lasers for modifying the factors influencing biocompatibility of a polymeric biomaterial in comparison with an F2 excimer laser. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

FEM

Shukla, Pratik and Lawrence, Jonathan (2014) Investigation of temperature distribution during CO2 and Fibre laser processing of Si3N4 engineering ceramic by means of a computational and experimental approach. Lasers In Engineering , 27 (3-4). pp. 135-160. ISSN 0898-1507

Fibre Laser

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

Shukla, Pratik and Lawrence, Jonathan (2012) A comparative study on the processing parameters during fibre and CO2 laser surface treatments of silicon nitride engineering ceramic. International Journal of Advanced Manufacturing Technology , 59 (1-4). pp. 143-155. ISSN 0268-3768

Fibre Laser surface treatment

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

Fibre laser

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

Fibre lasers

Shukla, Pratik and Lawrence, Jonathan (2010) Thermal analysis of fibre laser treated zirconia engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, 14 – 16 July 2010, Manchester, U.K..

Finite Element Modelling (FEM)

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Flow Velocity

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Food Packaging Cans

Shukla, Pratik (2014) Investigation into the high speed laser welding feasibility of tin-plated steels as used for three-piece food packaging can manufacture. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Force spectroscopy

Cojoc, Dan and Difato, Francesco and Ferrari, Enrico and Shahapure, Rajesh B. and Laishram, Jummi and Righi, Massimo and Di Fabrizio, Enzo and Torre, Vincent (2007) Properties of the force exerted by filopodia and lamellipodia and the involvement of cytoskeletal components. PLOS One, 2 (10). e1072. ISSN 1932-6203

Fracture Toughness (K1c)

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Fracture Toughness (K1c) Engineering ceramic

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by using a fibre laser surface treatment of a silicon nitride engineering ceramic. Journal of Materials Science, 45 (23). pp. 6540-6555. ISSN 0022-2461

Shukla, Pratik and Lawrence, Jonathan (2009) Laser surface treatment of engineering ceramics and the effects thereof on fracture toughness. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009): Laser Materials Processing, 2 - 5 November 2009, Orlando, Florida, USA.

Fracture toughness (K1c)

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Hardness

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

High Speed Laser welding

Shukla, Pratik and Johnson, Trevor and Wu, Zouzheng (2007) Effects of high speed laser welding on tin plated steels applicable to manufacture three piece packaging cans. In: National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME 2007) , 28 – 29 April 2007, Gwalior, India.

High Speed Welding

Shukla, Pratik (2014) Investigation into the high speed laser welding feasibility of tin-plated steels as used for three-piece food packaging can manufacture. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Instrumentation measurement and metrology

Cojoc, Dan and Cabrini, Stefano and Ferrari, Enrico and Malureanu, Radu and Danailov, Miltcho Bojanov and Di Fabrizio, Enzo (2004) Dynamic multiple optical trapping by means of diffractive optical elements. Microelectronic Engineering, 73-74 . pp. 927-932. ISSN 0167-9317

K1C

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

KrF excimer laser

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Laguerre-Gaussian beams

Garbin, Valeria and Cojoc, Dan and Ferrari, Enrico and Proietti, Remo Zaccaria and Cabrini, Stefano and Di Fabrizio, Enzo (2005) Optical micro-manipulation using Laguerre-Gaussian beams. Japanese Journal of Applied Physics, 44 (7B). pp. 5773-5776. ISSN 0021-4922

Laser

Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.

Laser Beam Brightness

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Laser Processing

Shukla, Pratik P. and Lawrence, Jonathan (2011) Mathematical modelling of the fibre laser surface processing of a zirconia engineering ceramic by means of three-dimensional finite element analysis. Proceedings of IMechE, Part C: Journal of Mechanical Engineering Science, 225 (4). pp. 949-964. ISSN 0954-4062

Laser Surface Engineering

Shukla, Pratik and Lawrence, Jonathan (2013) Evaluation of surface cracks following processing of a ZrO2 advance ceramic with CO2 and fibre laser radiation. Advances in Ceramic Science and Engineering (ACSE), 2 (4). pp. 141-150. ISSN 2325-6885

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Laser Surface Treatment

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Laser beam shaping

Moradi, Ali-Reza and Ferrari, Enrico and Garbin, Valeria and Di Fabrizio, Enzo and Cojoc, Dan (2007) Strength control in multiple optical traps generated by means of diffractive optical elements. Optoelectronics and Advanced Materials: Rapid Communications, 1 (4). pp. 158-161. ISSN UNSPECIFIED

Laser forming (LF)

Griffiths, Jonathan David and Sheikholeslami, Ghazal and Clark, Samuel and Edwardson, Stuart and Dearden, Geoff (2014) Towards optimization of beam mode for high efficiency laser thermal forming within metallurgical constraints. In: International Workshop on Thermal Forming and Welding Distortion 2014, April 09-10, 2014, Bremen, Germany. (In Press)

Laser surface treatment

Waugh, David (2011) Laser could light the way in joint surgery and save the NHS money. Lincolnshire Echo . ISSN 0962-5003

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

Lasers

Shukla, Pratik (2014) Fibre laser-interaction of technical ceramics during laser surface engineering. In: Laser Surface Engineering. Woodhead Publishing. ISBN UNSPECIFIED (In Press)

Shukla, Pratik (2014) Investigation into the high speed laser welding feasibility of tin-plated steels as used for three-piece food packaging can manufacture. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Shukla, Pratik and Lawrence, Jonathan (2013) Evaluation of surface cracks following processing of a ZrO2 advance ceramic with CO2 and fibre laser radiation. Advances in Ceramic Science and Engineering (ACSE), 2 (4). pp. 141-150. ISSN 2325-6885

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by means of CO2 laser processing of a silicon nitride engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, July 2010, Manchester.

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by using a fibre laser surface treatment of a silicon nitride engineering ceramic. Journal of Materials Science, 45 (23). pp. 6540-6555. ISSN 0022-2461

Shukla, Pratik and Lawrence, Jonathan (2014) Investigation of temperature distribution during CO2 and Fibre laser processing of Si3N4 engineering ceramic by means of a computational and experimental approach. Lasers In Engineering , 27 (3-4). pp. 135-160. ISSN 0898-1507

Shukla, Pratik and Lawrence, Jonathan (2009) Laser surface treatment of engineering ceramics and the effects thereof on fracture toughness. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009): Laser Materials Processing, 2 - 5 November 2009, Orlando, Florida, USA.

Shukla, Pratik and Lawrence, Jonathan (2013) Role of laser beam radiance in different ceramic processing: a two wavelengths comparison. Optics & Laser Technology, 54 . pp. 380-388. ISSN 0030-3992

Shukla, Pratik and Lawrence, Jonathan (2012) The influence of brightness during laser surface treatment of Si3N4 engineering ceramics. Optics and Lasers in Engineering, 50 (12). pp. 1746-1751. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan and Paul, Anish (2012) Influence of laser beam brightness during laser surface treatment of ZrO2 engineering ceramics. Lasers in Engineering, 22 (3/4). pp. 151-173. ISSN 0898-1507

Shukla, Pratik and Swanson, Philip and Page, Colin (2014) Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: a review. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Liquid Chemistry

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Low-index particles

Cojoc, Dan and Garbin, Valeria and Ferrari, Enrico and Businaro, Luca and Romanato, Filippo and Di Fabrizio, Enzo (2005) Laser trapping and micro-manipulation using optical vortices. Microelectronic Engineering, 78-79 . pp. 125-131. ISSN 0167-9317

Microscopy

Garbin , Valeria and Volpe, Giovanni and Ferrari, Enrico and Kozyreff, Gregory and Versluis, Michel and Petrov, Dmitri and Cojoc, Dan (2008) Mie scattering of a Laguerre-Gaussian beam for position detection of microbubbles. In: Lasers and Electro-Optics, 2008 and 2008 Conference on Quantum Electronics and Laser Science. CLEO/QELS 2008, 4-9 May 2008, San Jose, CA.

Moradi, Ali-Reza and Ferrari, Enrico and Garbin, Valeria and Di Fabrizio, Enzo and Cojoc, Dan (2007) Strength control in multiple optical traps generated by means of diffractive optical elements. Optoelectronics and Advanced Materials: Rapid Communications, 1 (4). pp. 158-161. ISSN UNSPECIFIED

Microstructure

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Open Thin Film

Dowding, Colin and Lawrence, Jonathan (2008) Analysis of the excimer laser ablation characteristics of bisphenol A polycarbonate in ambient air and under thin film laminar flow water immersion. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Open Thin Film Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166

Optical confinement and manipulation

Garbin , Valeria and Volpe, Giovanni and Ferrari, Enrico and Kozyreff, Gregory and Versluis, Michel and Petrov, Dmitri and Cojoc, Dan (2008) Mie scattering of a Laguerre-Gaussian beam for position detection of microbubbles. In: Lasers and Electro-Optics, 2008 and 2008 Conference on Quantum Electronics and Laser Science. CLEO/QELS 2008, 4-9 May 2008, San Jose, CA.

Moradi, Ali-Reza and Ferrari, Enrico and Garbin, Valeria and Di Fabrizio, Enzo and Cojoc, Dan (2007) Strength control in multiple optical traps generated by means of diffractive optical elements. Optoelectronics and Advanced Materials: Rapid Communications, 1 (4). pp. 158-161. ISSN UNSPECIFIED

Optical manipulation

Ferrari, Enrico and Emiliani, Valentina and Cojoc, Dan and Garbin, Valeria and Zahid, Morad and Durieux, Christiane and Coppey-Moisan, Maite and Di Fabrizio, Enzo (2005) Biological samples micro-manipulation by means of optical tweezers. Microelectronic Engineering, 78-79 . pp. 575-581. ISSN 0167-9317

Optical tweezers

Cojoc, Dan and Cabrini, Stefano and Ferrari, Enrico and Malureanu, Radu and Danailov, Miltcho Bojanov and Di Fabrizio, Enzo (2004) Dynamic multiple optical trapping by means of diffractive optical elements. Microelectronic Engineering, 73-74 . pp. 927-932. ISSN 0167-9317

Cojoc, Dan and Emiliani, Valentina and Ferrari, Enrico and Malureanu, Radu and Cabrini, Stefano and Proietti, Remo Zaccaria and Di Fabrizio, Enzo (2004) Multiple optical trapping by means of diffractive optical elements. Japanese Journal of Applied Physics, 43 (6B). pp. 3910-3915. ISSN 0021-4922

Cojoc, Dan and Garbin, Valeria and Ferrari, Enrico and Businaro, Luca and Romanato, Filippo and Di Fabrizio, Enzo (2005) Laser trapping and micro-manipulation using optical vortices. Microelectronic Engineering, 78-79 . pp. 125-131. ISSN 0167-9317

Ferrari, Enrico and Emiliani, Valentina and Cojoc, Dan and Garbin, Valeria and Zahid, Morad and Durieux, Christiane and Coppey-Moisan, Maite and Di Fabrizio, Enzo (2005) Biological samples micro-manipulation by means of optical tweezers. Microelectronic Engineering, 78-79 . pp. 575-581. ISSN 0167-9317

Garbin, V. and Ferrari, Enrico and Cojoc, D. and Di Fabrizio, E. and Overvelde, M. L. J. and van der Meer, S. M. and Versluis, M. and de Jong, N. and Lohse, D. (2006) Optical trapping of ultrasound contrast agent microbubbles: study of the bubble-wall and bubble-bubble interaction in ultrasound. In: IEEE Ultrasonics Symposium 2006, 2-6 October 2006, Vancouver, Canada.

Garbin, Valeria and Cojoc, Dan and Ferrari, Enrico and Proietti, Remo Zaccaria and Cabrini, Stefano and Di Fabrizio, Enzo (2005) Optical micro-manipulation using Laguerre-Gaussian beams. Japanese Journal of Applied Physics, 44 (7B). pp. 5773-5776. ISSN 0021-4922

Orbital angular momentum of light

Cojoc, Dan and Garbin, Valeria and Ferrari, Enrico and Businaro, Luca and Romanato, Filippo and Di Fabrizio, Enzo (2005) Laser trapping and micro-manipulation using optical vortices. Microelectronic Engineering, 78-79 . pp. 125-131. ISSN 0167-9317

Osteoblast cells

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

PMMA

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Peening

Shukla, Pratik and Swanson, Philip and Page, Colin (2014) Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: a review. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Phase Tranformation

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

Phase Transformation

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Plume Distortion

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Process Parameters

Shukla, Pratik and Lawrence, Jonathan (2013) Evaluation of surface cracks following processing of a ZrO2 advance ceramic with CO2 and fibre laser radiation. Advances in Ceramic Science and Engineering (ACSE), 2 (4). pp. 141-150. ISSN 2325-6885

Processing

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Quality

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Radiance (Brightness)

Shukla, Pratik and Lawrence, Jonathan (2013) Role of laser beam radiance in different ceramic processing: a two wavelengths comparison. Optics & Laser Technology, 54 . pp. 380-388. ISSN 0030-3992

Residual stress

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

SBF

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

SBF.

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

Shock Processing

Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.

Shot

Shukla, Pratik and Swanson, Philip and Page, Colin (2014) Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: a review. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Si3N4 engineering ceramic

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

SiO2

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Silicon Nitride

Shukla, Pratik and Lawrence, Jonathan (2012) The influence of brightness during laser surface treatment of Si3N4 engineering ceramics. Optics and Lasers in Engineering, 50 (12). pp. 1746-1751. ISSN 0143-8166

Silicon nitride

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Shukla, Pratik and Lawrence, Jonathan (2012) A comparative study on the processing parameters during fibre and CO2 laser surface treatments of silicon nitride engineering ceramic. International Journal of Advanced Manufacturing Technology , 59 (1-4). pp. 143-155. ISSN 0268-3768

Spatial light modulators

Cojoc, Dan and Cabrini, Stefano and Ferrari, Enrico and Malureanu, Radu and Danailov, Miltcho Bojanov and Di Fabrizio, Enzo (2004) Dynamic multiple optical trapping by means of diffractive optical elements. Microelectronic Engineering, 73-74 . pp. 927-932. ISSN 0167-9317

Emiliani, Valentina and Cojoc, Dan and Ferrari, Enrico and Garbin, Valeria and Durieux, Christiane and Coppey-Moisan, Maite and Di Fabrizio, Enzo (2005) Wave front engineering for microscopy of living cells. Optics Express, 13 (5). pp. 1395-1405. ISSN 1094-4087

Ferrari, Enrico and Emiliani, Valentina and Cojoc, Dan and Garbin, Valeria and Zahid, Morad and Durieux, Christiane and Coppey-Moisan, Maite and Di Fabrizio, Enzo (2005) Biological samples micro-manipulation by means of optical tweezers. Microelectronic Engineering, 78-79 . pp. 575-581. ISSN 0167-9317

Moradi, Ali-Reza and Ferrari, Enrico and Garbin, Valeria and Di Fabrizio, Enzo and Cojoc, Dan (2007) Strength control in multiple optical traps generated by means of diffractive optical elements. Optoelectronics and Advanced Materials: Rapid Communications, 1 (4). pp. 158-161. ISSN UNSPECIFIED

Steady State FEA

Shukla, Pratik P. and Lawrence, Jonathan (2011) Mathematical modelling of the fibre laser surface processing of a zirconia engineering ceramic by means of three-dimensional finite element analysis. Proceedings of IMechE, Part C: Journal of Mechanical Engineering Science, 225 (4). pp. 949-964. ISSN 0954-4062

Surface Treatment

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

Shukla, Pratik and Lawrence, Jonathan (2012) A comparative study on the processing parameters during fibre and CO2 laser surface treatments of silicon nitride engineering ceramic. International Journal of Advanced Manufacturing Technology , 59 (1-4). pp. 143-155. ISSN 0268-3768

Shukla, Pratik and Lawrence, Jonathan (2012) The influence of brightness during laser surface treatment of Si3N4 engineering ceramics. Optics and Lasers in Engineering, 50 (12). pp. 1746-1751. ISSN 0143-8166

Surface modification

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Technical

Shukla, Pratik and Swanson, Philip and Page, Colin (2014) Laser shock peening and mechanical shot peening processes applicable for the surface treatment of technical grade ceramics: a review. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Technical Ceramics

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by means of CO2 laser processing of a silicon nitride engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, July 2010, Manchester.

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Temperature gradient mechanism (TGM)

Griffiths, Jonathan David and Sheikholeslami, Ghazal and Clark, Samuel and Edwardson, Stuart and Dearden, Geoff (2014) Towards optimization of beam mode for high efficiency laser thermal forming within metallurgical constraints. In: International Workshop on Thermal Forming and Welding Distortion 2014, April 09-10, 2014, Bremen, Germany. (In Press)

Thermal Analysis

Shukla, Pratik and Lawrence, Jonathan (2010) Thermal analysis of fibre laser treated zirconia engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, 14 – 16 July 2010, Manchester, U.K..

Thermal Shock

Shukla, Pratik and Lawrence, Jonathan (2013) Evaluation of surface cracks following processing of a ZrO2 advance ceramic with CO2 and fibre laser radiation. Advances in Ceramic Science and Engineering (ACSE), 2 (4). pp. 141-150. ISSN 2325-6885

Thin Film Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054

Tin-Plated Steels

Shukla, Pratik (2014) Investigation into the high speed laser welding feasibility of tin-plated steels as used for three-piece food packaging can manufacture. Proceedings of the Institution of Mechanical Engineers, Part B, Journal of Engineering Manufacture . ISSN 0954-4054 (In Press)

Tinplated steel

Shukla, Pratik and Johnson, Trevor and Wu, Zouzheng (2007) Effects of high speed laser welding on tin plated steels applicable to manufacture three piece packaging cans. In: National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME 2007) , 28 – 29 April 2007, Gwalior, India.

Topograpghy

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Topographical

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Topography

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Trapping

Garbin , Valeria and Volpe, Giovanni and Ferrari, Enrico and Kozyreff, Gregory and Versluis, Michel and Petrov, Dmitri and Cojoc, Dan (2008) Mie scattering of a Laguerre-Gaussian beam for position detection of microbubbles. In: Lasers and Electro-Optics, 2008 and 2008 Conference on Quantum Electronics and Laser Science. CLEO/QELS 2008, 4-9 May 2008, San Jose, CA.

UCA

Garbin, V. and Dollet, B. and Overvelde, M. L. J. and de Jong, N. and Lohse, D. and Versluis, M and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. (2007) Coupled dynamics of an isolated UCA microbubble pair. In: IEEE Ultrasonics Symposium, 2007, 28-31 October 2007, New York, USA.

Vortex

Cojoc, Dan and Garbin, Valeria and Ferrari, Enrico and Businaro, Luca and Romanato, Filippo and Di Fabrizio, Enzo (2005) Laser trapping and micro-manipulation using optical vortices. Microelectronic Engineering, 78-79 . pp. 125-131. ISSN 0167-9317

Wettability

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

X-ray diffraction

Amenitsch, H. and Cojoc, D. and Rappolt, M. and Sartori, B. and Laggner, P. and Ferrari, Enrico and Garbin, V. and Burghammer, M. and Riekel, C. and Di Fabrizio, E. (2006) Optical tweezers for sample fixing in micro‐diffraction experiments. In: Synchrotron Radiation Instrumentation: Ninth International Conference on Synchrotron Radiation Instrumentation, 8 May-2 June 2006, Daegu, Korea.

Cojoc, D. and Ferrari, Enrico and Garbin, V. and Di Fabrizio, E. and Amenitsch, H. and Rappolt, M. and Sartori, B. and Laggner, P. and Burghammer, M. and Riekel, C. (2007) Scanning x-ray microdiffraction of optically manipulated liposomes. Applied Physics Letters, 91 (23). p. 234107. ISSN 0003-6951

Zirconia Ceramics

Shukla, Pratik and Lawrence, Jonathan and Paul, Anish (2012) Influence of laser beam brightness during laser surface treatment of ZrO2 engineering ceramics. Lasers in Engineering, 22 (3/4). pp. 151-173. ISSN 0898-1507

ZrO2

Shukla, Pratik and Lawrence, Jonathan (2013) Evaluation of surface cracks following processing of a ZrO2 advance ceramic with CO2 and fibre laser radiation. Advances in Ceramic Science and Engineering (ACSE), 2 (4). pp. 141-150. ISSN 2325-6885

ZrO2 engineering ceramics

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

Shukla, Pratik P. and Lawrence, Jonathan (2011) Mathematical modelling of the fibre laser surface processing of a zirconia engineering ceramic by means of three-dimensional finite element analysis. Proceedings of IMechE, Part C: Journal of Mechanical Engineering Science, 225 (4). pp. 949-964. ISSN 0954-4062

acoustic radiation pressure

Garbin, V. and Dollet, B. and Overvelde, M. L. J. and de Jong, N. and Lohse, D. and Versluis, M and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. (2007) Coupled dynamics of an isolated UCA microbubble pair. In: IEEE Ultrasonics Symposium, 2007, 28-31 October 2007, New York, USA.

atmospheric conditions

Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

bioactivity

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

bioactivity.

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

biocompatibility

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

biofunctionality

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

biological implants

Waugh, David (2011) Laser could light the way in joint surgery and save the NHS money. Lincolnshire Echo . ISSN 0962-5003

biological techniques

Cojoc, D. and Ferrari, Enrico and Garbin, V. and Di Fabrizio, E. and Amenitsch, H. and Rappolt, M. and Sartori, B. and Laggner, P. and Burghammer, M. and Riekel, C. (2007) Scanning x-ray microdiffraction of optically manipulated liposomes. Applied Physics Letters, 91 (23). p. 234107. ISSN 0003-6951

biomedical imaging

Amenitsch, H. and Cojoc, D. and Rappolt, M. and Sartori, B. and Laggner, P. and Ferrari, Enrico and Garbin, V. and Burghammer, M. and Riekel, C. and Di Fabrizio, E. (2006) Optical tweezers for sample fixing in micro‐diffraction experiments. In: Synchrotron Radiation Instrumentation: Ninth International Conference on Synchrotron Radiation Instrumentation, 8 May-2 June 2006, Daegu, Korea.

biomembranes

Cojoc, D. and Ferrari, Enrico and Garbin, V. and Di Fabrizio, E. and Amenitsch, H. and Rappolt, M. and Sartori, B. and Laggner, P. and Burghammer, M. and Riekel, C. (2007) Scanning x-ray microdiffraction of optically manipulated liposomes. Applied Physics Letters, 91 (23). p. 234107. ISSN 0003-6951

bmjanomaly

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

bmjdoid

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

bmjtype

Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

bubble-to-bubble interactions

Garbin, V. and Ferrari, Enrico and Cojoc, D. and Di Fabrizio, E. and Overvelde, M. L. J. and van der Meer, S. M. and Versluis, M. and de Jong, N. and Lohse, D. (2006) Optical trapping of ultrasound contrast agent microbubbles: study of the bubble-wall and bubble-bubble interaction in ultrasound. In: IEEE Ultrasonics Symposium 2006, 2-6 October 2006, Vancouver, Canada.

bubbles

Garbin, V. and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. and Overvelde, M. L. J. and van der Meer, S. M. and de Jong, N. and Lohse, D. and Versluis, M. (2007) Changes in microbubble dynamics near a boundary revealed by combined optical micromanipulation and high-speed imaging. Applied Physics Letters, 90 (11). p. 114103. ISSN 0003-6951

calcium phosphate formation

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

cellular biophysics

Cojoc, D. and Ferrari, Enrico and Garbin, V. and Di Fabrizio, E. and Amenitsch, H. and Rappolt, M. and Sartori, B. and Laggner, P. and Burghammer, M. and Riekel, C. (2007) Scanning x-ray microdiffraction of optically manipulated liposomes. Applied Physics Letters, 91 (23). p. 234107. ISSN 0003-6951

chemical

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

chemical composition

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

chemical map

Di Fabrizio, Enzo and Cojoc, Dan and Emiliani, Valentina and Cabrini, Stefano and Coppey-Moisan, Maite and Ferrari, Enrico and Garbin, Valeria and Altissimo, Matteo (2004) Microscopy of biological sample through advanced diffractive optics from visible to x-ray wavelength regime. Microscopy Research and Technique, 65 (4/5). pp. 252-262. ISSN 1059-910X

contact angle

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

cytotoxicity

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

debris control

Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

diffractive optical elements

Cojoc, D. and Ferrari, Enrico and Garbin, V. and Di Fabrizio, E. and Amenitsch, H. and Rappolt, M. and Sartori, B. and Laggner, P. and Burghammer, M. and Riekel, C. (2007) Scanning x-ray microdiffraction of optically manipulated liposomes. Applied Physics Letters, 91 (23). p. 234107. ISSN 0003-6951

Cojoc, Dan and Emiliani, Valentina and Ferrari, Enrico and Malureanu, Radu and Cabrini, Stefano and Proietti, Remo Zaccaria and Di Fabrizio, Enzo (2004) Multiple optical trapping by means of diffractive optical elements. Japanese Journal of Applied Physics, 43 (6B). pp. 3910-3915. ISSN 0021-4922

Garbin, Valeria and Cojoc, Dan and Ferrari, Enrico and Proietti, Remo Zaccaria and Cabrini, Stefano and Di Fabrizio, Enzo (2005) Optical micro-manipulation using Laguerre-Gaussian beams. Japanese Journal of Applied Physics, 44 (7B). pp. 5773-5776. ISSN 0021-4922

diffractive optics

Di Fabrizio, Enzo and Cojoc, Dan and Emiliani, Valentina and Cabrini, Stefano and Coppey-Moisan, Maite and Ferrari, Enrico and Garbin, Valeria and Altissimo, Matteo (2004) Microscopy of biological sample through advanced diffractive optics from visible to x-ray wavelength regime. Microscopy Research and Technique, 65 (4/5). pp. 252-262. ISSN 1059-910X

dorsal root ganglia

Cojoc, Dan and Difato, Francesco and Ferrari, Enrico and Shahapure, Rajesh B. and Laishram, Jummi and Righi, Massimo and Di Fabrizio, Enzo and Torre, Vincent (2007) Properties of the force exerted by filopodia and lamellipodia and the involvement of cytoskeletal components. PLOS One, 2 (10). e1072. ISSN 1932-6203

engineering

Lawrence, Jonathan and Waugh, David and Dowding, Colin and Griffiths, Jonathan David (2012) University’s lasers group solves industry issues. The Lincolnite . ISSN UNSPECIFIED

filopodia

Cojoc, Dan and Difato, Francesco and Ferrari, Enrico and Shahapure, Rajesh B. and Laishram, Jummi and Righi, Massimo and Di Fabrizio, Enzo and Torre, Vincent (2007) Properties of the force exerted by filopodia and lamellipodia and the involvement of cytoskeletal components. PLOS One, 2 (10). e1072. ISSN 1932-6203

flow visualisation

Garbin, V. and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. and Overvelde, M. L. J. and van der Meer, S. M. and de Jong, N. and Lohse, D. and Versluis, M. (2007) Changes in microbubble dynamics near a boundary revealed by combined optical micromanipulation and high-speed imaging. Applied Physics Letters, 90 (11). p. 114103. ISSN 0003-6951

holographic optical tweezers

Emiliani, Valentina and Cojoc, Dan and Ferrari, Enrico and Garbin, Valeria and Durieux, Christiane and Coppey-Moisan, Maite and Di Fabrizio, Enzo (2005) Wave front engineering for microscopy of living cells. Optics Express, 13 (5). pp. 1395-1405. ISSN 1094-4087

lamellipodia

Cojoc, Dan and Difato, Francesco and Ferrari, Enrico and Shahapure, Rajesh B. and Laishram, Jummi and Righi, Massimo and Di Fabrizio, Enzo and Torre, Vincent (2007) Properties of the force exerted by filopodia and lamellipodia and the involvement of cytoskeletal components. PLOS One, 2 (10). e1072. ISSN 1932-6203

laser

Lawrence, Jonathan and Waugh, David and Dowding, Colin and Griffiths, Jonathan David (2012) University’s lasers group solves industry issues. The Lincolnite . ISSN UNSPECIFIED

laser beams

Garbin, V. and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. and Overvelde, M. L. J. and van der Meer, S. M. and de Jong, N. and Lohse, D. and Versluis, M. (2007) Changes in microbubble dynamics near a boundary revealed by combined optical micromanipulation and high-speed imaging. Applied Physics Letters, 90 (11). p. 114103. ISSN 0003-6951

laser surface treatment

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

laser tweezers

Cojoc, Dan and Difato, Francesco and Ferrari, Enrico and Shahapure, Rajesh B. and Laishram, Jummi and Righi, Massimo and Di Fabrizio, Enzo and Torre, Vincent (2007) Properties of the force exerted by filopodia and lamellipodia and the involvement of cytoskeletal components. PLOS One, 2 (10). e1072. ISSN 1932-6203

lipid bilayers

Amenitsch, H. and Cojoc, D. and Rappolt, M. and Sartori, B. and Laggner, P. and Ferrari, Enrico and Garbin, V. and Burghammer, M. and Riekel, C. and Di Fabrizio, E. (2006) Optical tweezers for sample fixing in micro‐diffraction experiments. In: Synchrotron Radiation Instrumentation: Ninth International Conference on Synchrotron Radiation Instrumentation, 8 May-2 June 2006, Daegu, Korea.

material removal

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

microbubble dynamics

Garbin, V. and Ferrari, Enrico and Cojoc, D. and Di Fabrizio, E. and Overvelde, M. L. J. and van der Meer, S. M. and Versluis, M. and de Jong, N. and Lohse, D. (2006) Optical trapping of ultrasound contrast agent microbubbles: study of the bubble-wall and bubble-bubble interaction in ultrasound. In: IEEE Ultrasonics Symposium 2006, 2-6 October 2006, Vancouver, Canada.

microbubbles

Garbin, V. and Dollet, B. and Overvelde, M. L. J. and de Jong, N. and Lohse, D. and Versluis, M and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. (2007) Coupled dynamics of an isolated UCA microbubble pair. In: IEEE Ultrasonics Symposium, 2007, 28-31 October 2007, New York, USA.

nylon 6 6

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

nylon 66

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Waugh, David and Lawrence, Jonathan and Walton, C.D. and Zakaria, R.B. (2008) Investigation into the efficacy of CO2 lasers for modifying the factors influencing biocompatibility of a polymeric biomaterial in comparison with an F2 excimer laser. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Waugh, David and Lawrence, Peter (2008) Wettability characteristics variation of nylon 6,6 by means of CO2 laser generated surface patterns. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

optical manipulation

Emiliani, Valentina and Cojoc, Dan and Ferrari, Enrico and Garbin, Valeria and Durieux, Christiane and Coppey-Moisan, Maite and Di Fabrizio, Enzo (2005) Wave front engineering for microscopy of living cells. Optics Express, 13 (5). pp. 1395-1405. ISSN 1094-4087

optical trapping

Di Fabrizio, Enzo and Cojoc, Dan and Emiliani, Valentina and Cabrini, Stefano and Coppey-Moisan, Maite and Ferrari, Enrico and Garbin, Valeria and Altissimo, Matteo (2004) Microscopy of biological sample through advanced diffractive optics from visible to x-ray wavelength regime. Microscopy Research and Technique, 65 (4/5). pp. 252-262. ISSN 1059-910X

optical tweezers

Garbin, V. and Dollet, B. and Overvelde, M. L. J. and de Jong, N. and Lohse, D. and Versluis, M and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. (2007) Coupled dynamics of an isolated UCA microbubble pair. In: IEEE Ultrasonics Symposium, 2007, 28-31 October 2007, New York, USA.

osteoblast cells

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

phase contrast

Di Fabrizio, Enzo and Cojoc, Dan and Emiliani, Valentina and Cabrini, Stefano and Coppey-Moisan, Maite and Ferrari, Enrico and Garbin, Valeria and Altissimo, Matteo (2004) Microscopy of biological sample through advanced diffractive optics from visible to x-ray wavelength regime. Microscopy Research and Technique, 65 (4/5). pp. 252-262. ISSN 1059-910X

photonics

Lawrence, Jonathan and Waugh, David and Dowding, Colin and Griffiths, Jonathan David (2012) University’s lasers group solves industry issues. The Lincolnite . ISSN UNSPECIFIED

processing gases

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

radiation pressure

Cojoc, D. and Ferrari, Enrico and Garbin, V. and Di Fabrizio, E. and Amenitsch, H. and Rappolt, M. and Sartori, B. and Laggner, P. and Burghammer, M. and Riekel, C. (2007) Scanning x-ray microdiffraction of optically manipulated liposomes. Applied Physics Letters, 91 (23). p. 234107. ISSN 0003-6951

Garbin, V. and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. and Overvelde, M. L. J. and van der Meer, S. M. and de Jong, N. and Lohse, D. and Versluis, M. (2007) Changes in microbubble dynamics near a boundary revealed by combined optical micromanipulation and high-speed imaging. Applied Physics Letters, 90 (11). p. 114103. ISSN 0003-6951

regenerative medicine

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

scanning microscopy

Di Fabrizio, Enzo and Cojoc, Dan and Emiliani, Valentina and Cabrini, Stefano and Coppey-Moisan, Maite and Ferrari, Enrico and Garbin, Valeria and Altissimo, Matteo (2004) Microscopy of biological sample through advanced diffractive optics from visible to x-ray wavelength regime. Microscopy Research and Technique, 65 (4/5). pp. 252-262. ISSN 1059-910X

secondary Bjerknes force

Garbin, V. and Dollet, B. and Overvelde, M. L. J. and de Jong, N. and Lohse, D. and Versluis, M and Cojoc, D. and Ferrari, Enrico and Di Fabrizio, E. (2007) Coupled dynamics of an isolated UCA microbubble pair. In: IEEE Ultrasonics Symposium, 2007, 28-31 October 2007, New York, USA.

simulated body fluid

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

simulated body fluid (SBF)

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

surface finish

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

surface free energy

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

surface treatment

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Waugh, David and Lawrence, Peter (2008) Wettability characteristics variation of nylon 6,6 by means of CO2 laser generated surface patterns. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

synchrotron radiation

Cojoc, D. and Ferrari, Enrico and Garbin, V. and Di Fabrizio, E. and Amenitsch, H. and Rappolt, M. and Sartori, B. and Laggner, P. and Burghammer, M. and Riekel, C. (2007) Scanning x-ray microdiffraction of optically manipulated liposomes. Applied Physics Letters, 91 (23). p. 234107. ISSN 0003-6951

ultrasound contrast agents

Garbin, V. and Ferrari, Enrico and Cojoc, D. and Di Fabrizio, E. and Overvelde, M. L. J. and van der Meer, S. M. and Versluis, M. and de Jong, N. and Lohse, D. (2006) Optical trapping of ultrasound contrast agent microbubbles: study of the bubble-wall and bubble-bubble interaction in ultrasound. In: IEEE Ultrasonics Symposium 2006, 2-6 October 2006, Vancouver, Canada.

wave front engineering

Di Fabrizio, Enzo and Cojoc, Dan and Emiliani, Valentina and Cabrini, Stefano and Coppey-Moisan, Maite and Ferrari, Enrico and Garbin, Valeria and Altissimo, Matteo (2004) Microscopy of biological sample through advanced diffractive optics from visible to x-ray wavelength regime. Microscopy Research and Technique, 65 (4/5). pp. 252-262. ISSN 1059-910X

wettability

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

Waugh, David and Lawrence, Jonathan and Walton, C.D. and Zakaria, R.B. (2008) Investigation into the efficacy of CO2 lasers for modifying the factors influencing biocompatibility of a polymeric biomaterial in comparison with an F2 excimer laser. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

Waugh, David and Lawrence, Peter (2008) Wettability characteristics variation of nylon 6,6 by means of CO2 laser generated surface patterns. In: ICALEO 2008, October 20-23 2008, Pechanga, CA, USA.

wettability characteristics

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

This list was generated on Wed Aug 20 07:30:31 2014 BST.