Items where Subject is "F Physical Sciences > F200 Materials Science"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type
Anatomy Arsenic Atomic Spectroscopy BA Barium Biocompatibility Brightness Byzantine mosaics CO CO oxidation CO2 Laser CO2 laser Callosobruchus maculatus Cells Ceramics Characterization Chemometrics Cleavers Composition Compositional characterization Conservation mortars EXAFS Engineering Ceramics Equine FEM Fiber lasers Fibre Laser Fibre Laser surface treatment Fibre lasers Finite Element Modelling (FEM) Fire Fire debris Forensic Science Fracture Toughness (K1c) Fracture Toughness (K1c) Engineering ceramic Fracture toughness (K1c) Fuel Cell Fuel Cell. Fuel cell catalysts Galium aparine Hardness Heat affected zone High Speed Laser welding Historic building Historic lighthouse conservation Historic masonry Hoof Horses Jewellery K1C Kinetics of paper degradation LI0.5FE2.5-XCRXO4 Laser Laser Beam Brightness Laser Surface Engineering Laser Surface Treatment Laser surface treatment Laser treatment Lasers Low oxygen environments Mass storage Mercury Mesenchymal stem cell Microstructure Moisture content Moisture monitoring Moisture probes Morphology Morphology and composition Multivariate Analysis Nanoparticle Natural pozzolans NiTi OXIDES PMMA POWDER Paper-based collections Phase Tranformation Phase Transformation Photoelectron spectroscopy Platinum Porcine cortical bone Preventive conservation Principal Component Analysis Processing Pt on Y zeolite catalyst Pyrolysis Products Radiance (Brightness) Raman Spectroscopy Remediation Restoration mortars Ruthenium Rutherford backscattering spectrometry SHS Scanning electron microscopy Shape memory Ni-Ti alloys Shape memory alloys(SMA) Shock Processing SiO2 Silicon Nitride Silicon nitride Surface Treatment Surface modification Surface morphology, Coarse-grained structure Technical Ceramics Thermal Analysis Tinplated steel Topograpghy Topographical Topography Ultrasound extraction Vigna angularis Vigna radiata Vigna unguiculata Wettability X ray photoemission spectroscopy, Cell culture Young's Modulus Zirconia Ceramics ZrO2 engineering ceramics acid attack acid rain ancient monuments anisotropy archaeological bone art practice barium hydroxide bioactivity bioactivity. biocompatibility biofunctionality biological implants bioremediation bioventing bmjcheck bmjtype bond lengths calcium phosphate formation carbon catalysts cellulose microfibril orientation chemical communication conservation conservation mortars conservation strategies contact angle contemporary jewellery degradation egg laying behaviour electrochemistry environmental monitoring equine fabric deterioration femur fluorescence ground pollution hardness historic lighthouses historic masonry hoof hydrocarbons ignitable liquids jewellery laser laser marking laser processing laser surface patterning laser surface treatment lighthouse lime lime-based mortars material analysis materials science mechanical properties moisture content moisture movement molybdenum non-destructive testing nylon 6 6 nylon 66 osteoblast cells ovine oxidation paper-based collections plastics platinum pollution post-retrieval environment pozzolanic reactivity pozzolans preventive conservation science seed simulated body fluid simulated body fluid (SBF) stone monuments stratum medium sulphates surface treatment titanium titanium oxide toughness transmission electron microscopy two way process wettability
Number of items at this level: 279.

Anatomy

Goodman, A. M. (2005) Mechanical adaptations of cleavers (Galium aparine). Annals of Botany, 95 (3). pp. 475-480. ISSN 0305-7364

Arsenic

Lummas, S. and Ruiz-Jimenez, J. and Luque de Castro, M. D. and Colston, Belinda and Gonzalez-Rodriguez, Jose and Chen, B. and Corns, W. (2011) Determination of Arsenic, Mercury and Barium in herbarium mount paper using dynamic ultrasound-assisted extraction prior to atomic fluorescence and absorption spectrometry. Analytical Letters, 44 (10). pp. 1842-1852. ISSN 0003-2719

Atomic Spectroscopy

Lummas, S. and Ruiz-Jimenez, J. and Luque de Castro, M. D. and Colston, Belinda and Gonzalez-Rodriguez, Jose and Chen, B. and Corns, W. (2011) Determination of Arsenic, Mercury and Barium in herbarium mount paper using dynamic ultrasound-assisted extraction prior to atomic fluorescence and absorption spectrometry. Analytical Letters, 44 (10). pp. 1842-1852. ISSN 0003-2719

BA

Spiers, Hayley and Parkin, Ivan P. and Pankhurst, Quentin A. and Affleck, Louise and Green, Mark and Caruana, D. J. and Kuznetsov, Maxim V. and Yao, Jun and Vaughan , Gavin and Terry, Ann and Kvick, Ake (2004) Self propagating high temperature synthesis of magnesium zinc ferrites (MgxZn1-xFe2O3): thermal imaging and time resolved X-ray diffraction experiments. Journal of Materials Chemistry, 14 (7). pp. 1104-1111. ISSN 0959-9428

Barium

Lummas, S. and Ruiz-Jimenez, J. and Luque de Castro, M. D. and Colston, Belinda and Gonzalez-Rodriguez, Jose and Chen, B. and Corns, W. (2011) Determination of Arsenic, Mercury and Barium in herbarium mount paper using dynamic ultrasound-assisted extraction prior to atomic fluorescence and absorption spectrometry. Analytical Letters, 44 (10). pp. 1842-1852. ISSN 0003-2719

Biocompatibility

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Brightness

Shukla, Pratik and Lawrence, Jonathan (2012) The influence of brightness during laser surface treatment of Si3N4 engineering ceramics. Optics and Lasers in Engineering, 50 (12). pp. 1746-1751. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan and Paul, Anish (2012) Influence of laser beam brightness during laser surface treatment of ZrO2 engineering ceramics. Lasers in Engineering, 22 (3/4). pp. 151-173. ISSN 0898-1507

Byzantine mosaics

Karatasios, Ioannis and Colston, Belinda and Watt, David (2005) The effect of barium hydroxide on the physicochemical properties of lime-based conservation mortars. PhD thesis, De Montfort University.

CO

Spiers, Hayley and Parkin, Ivan P. and Pankhurst, Quentin A. and Affleck, Louise and Green, Mark and Caruana, D. J. and Kuznetsov, Maxim V. and Yao, Jun and Vaughan , Gavin and Terry, Ann and Kvick, Ake (2004) Self propagating high temperature synthesis of magnesium zinc ferrites (MgxZn1-xFe2O3): thermal imaging and time resolved X-ray diffraction experiments. Journal of Materials Chemistry, 14 (7). pp. 1104-1111. ISSN 0959-9428

CO oxidation

Rose, Abigail and Crabb, Eleanor M. and Qian, Yangdong and Ravikumar, M. K. and Wells, Peter P. and Wiltshire, Richard J. K. and Yao, Jun and Bilsborrow, Robert and Mosselmans, Fred and Russell, Andrea E. (2007) Potential dependence of segregation and surface alloy formation of a Ru modified carbon supported Pt catalyst. Electrochimica Acta, 52 ( 19). pp. 5556-5564. ISSN 0013-4686

CO2 Laser

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

CO2 laser

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Shukla, Pratik and Lawrence, Jonathan (2012) A comparative study on the processing parameters during fibre and CO2 laser surface treatments of silicon nitride engineering ceramic. International Journal of Advanced Manufacturing Technology , 59 (1-4). pp. 143-155. ISSN 0268-3768

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

Callosobruchus maculatus

Goodman, A. M. and Giddings, J. J. (2009) A hard coat, a tough choice? The effects of host seed morphology and mechanics on the egg laying behaviour of the bruchid beetle, Callosobruchus maculatus. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology, Volume (Issue ). S130 -S131. ISSN 1095-6433

Cells

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Ceramics

Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2014) Investigation of temperature distribution during CO2 and Fibre laser processing of Si3N4 engineering ceramic by means of a computational and experimental approach. Lasers In Engineering , 27 (3-4). pp. 135-160. ISSN 0898-1507

Shukla, Pratik and Lawrence, Jonathan (2013) Role of laser beam radiance in different ceramic processing: a two wavelengths comparison. Optics & Laser Technology, 54 . pp. 380-388. ISSN 0030-3992

Characterization

Shukla, Pratik (2014) Fibre laser-interaction of technical ceramics during laser surface engineering. In: Laser Surface Engineering. Woodhead Publishing. ISBN UNSPECIFIED (In Press)

Chemometrics

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

Cleavers

Goodman, A. M. (2005) Mechanical adaptations of cleavers (Galium aparine). Annals of Botany, 95 (3). pp. 475-480. ISSN 0305-7364

Composition

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Compositional characterization

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Conservation mortars

Ampatzioglou, Eirini and Karatasios, Ioannis and Colston, Belinda and Watt, David and Kilikoglou, Vassilis (2010) Lime-natural pozzolan conservation mortars: parameters that affect reactivity and strength. In: Historic Mortars and RILEM TC 203-RHM Final Workshop HMC 2010. Rilem Publications S.A.R.L., pp. 845-852. ISBN UNSPECIFIED

EXAFS

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

Rose, Abigail and Crabb, Eleanor M. and Qian, Yangdong and Ravikumar, M. K. and Wells, Peter P. and Wiltshire, Richard J. K. and Yao, Jun and Bilsborrow, Robert and Mosselmans, Fred and Russell, Andrea E. (2007) Potential dependence of segregation and surface alloy formation of a Ru modified carbon supported Pt catalyst. Electrochimica Acta, 52 ( 19). pp. 5556-5564. ISSN 0013-4686

Rose, Abigail and Maniguet, Stephanie and Mathew, Rebecca J. and Slater, Claire and Yao, Jun and Russell, Andrea E. (2003) Hydride phase formation in carbon supported palladium nanoparticle electrodes investigated using in situ EXAFS and XRD. Physical Chemistry Chemical Physics, 15 (5). pp. 3220-3225. ISSN 1463-9076

Yao, Jun and Yao, Yufeng (2012) Characteristics of Pt on zeolite electrocatalyst for direct methanol fuel cell. In: The 2nd Int. Conf. on Engineering and Technology Innovation, 2-6 November 2012, Kaohsiung, Taiwan.

Engineering Ceramics

Shukla, Pratik (2014) Fibre laser-interaction of technical ceramics during laser surface engineering. In: Laser Surface Engineering. Woodhead Publishing. ISBN UNSPECIFIED (In Press)

Equine

Goodman, A. M. and Haggis, Lindsay and Bonney, Heather (2007) Flexural properties of the equine hoof wall. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology , 146 (4). Page S118. ISSN 1095-6433

FEM

Shukla, Pratik and Lawrence, Jonathan (2014) Investigation of temperature distribution during CO2 and Fibre laser processing of Si3N4 engineering ceramic by means of a computational and experimental approach. Lasers In Engineering , 27 (3-4). pp. 135-160. ISSN 0898-1507

Fiber lasers

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Fibre Laser

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2012) A comparative study on the processing parameters during fibre and CO2 laser surface treatments of silicon nitride engineering ceramic. International Journal of Advanced Manufacturing Technology , 59 (1-4). pp. 143-155. ISSN 0268-3768

Fibre Laser surface treatment

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

Fibre lasers

Shukla, Pratik and Lawrence, Jonathan (2010) Thermal analysis of fibre laser treated zirconia engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, 14 – 16 July 2010, Manchester, U.K..

Finite Element Modelling (FEM)

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Fire

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

Fire debris

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

Forensic Science

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

Fracture Toughness (K1c)

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Fracture Toughness (K1c) Engineering ceramic

Shukla, Pratik and Lawrence, Jonathan (2009) Laser surface treatment of engineering ceramics and the effects thereof on fracture toughness. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009): Laser Materials Processing, 2 - 5 November 2009, Orlando, Florida, USA.

Fracture toughness (K1c)

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Fuel Cell

Rose, Abigail and Maniguet, Stephanie and Mathew, Rebecca J. and Slater, Claire and Yao, Jun and Russell, Andrea E. (2003) Hydride phase formation in carbon supported palladium nanoparticle electrodes investigated using in situ EXAFS and XRD. Physical Chemistry Chemical Physics, 15 (5). pp. 3220-3225. ISSN 1463-9076

Fuel Cell.

Yao, Jun and Yao, Yufeng (2012) Characteristics of Pt on zeolite electrocatalyst for direct methanol fuel cell. In: The 2nd Int. Conf. on Engineering and Technology Innovation, 2-6 November 2012, Kaohsiung, Taiwan.

Fuel cell catalysts

Rose, Abigail and Crabb, Eleanor M. and Qian, Yangdong and Ravikumar, M. K. and Wells, Peter P. and Wiltshire, Richard J. K. and Yao, Jun and Bilsborrow, Robert and Mosselmans, Fred and Russell, Andrea E. (2007) Potential dependence of segregation and surface alloy formation of a Ru modified carbon supported Pt catalyst. Electrochimica Acta, 52 ( 19). pp. 5556-5564. ISSN 0013-4686

Galium aparine

Goodman, A. M. (2005) Mechanical adaptations of cleavers (Galium aparine). Annals of Botany, 95 (3). pp. 475-480. ISSN 0305-7364

Hardness

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Heat affected zone

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

High Speed Laser welding

Shukla, Pratik and Johnson, Trevor and Wu, Zouzheng (2007) Effects of high speed laser welding on tin plated steels applicable to manufacture three piece packaging cans. In: National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME 2007) , 28 – 29 April 2007, Gwalior, India.

Historic building

Colston, Belinda and Watt, David (2008) Non-destructive investigation of a historic English lighthouse. In: 1st International Conference on Construction Heritage in Coastal and Marine Environments: damage, diagnostics, maintenance and rehabilitation, 28–30 January 2008, Lisbon, Portugal.

Historic lighthouse conservation

Fielding, Nicole and Colston, Belinda and Goodman, Adrian (2013) Evaluating the use of agricultural moisture probes in the historic built environment. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

Historic masonry

Fielding, Nicole and Colston, Belinda and Goodman, Adrian (2013) Evaluating the use of agricultural moisture probes in the historic built environment. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

Hoof

Goodman, A. M. and Haggis , L. (2008) Regional variation in the flexural properties of the equine hoof wall. Comparative Exercise Physiology , 5 . 161-168.. ISSN 1755-2540

Horses

Goodman, A. M. and Haggis, Lindsay and Bonney, Heather (2007) Flexural properties of the equine hoof wall. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology , 146 (4). Page S118. ISSN 1095-6433

Goodman, A. M. and Haggis , L. (2008) Regional variation in the flexural properties of the equine hoof wall. Comparative Exercise Physiology , 5 . 161-168.. ISSN 1755-2540

Jewellery

O'Hana, Sarah and Turner, Lesley (2011) The power of communication through art jewellery. In: New Directions in the Humanities, 8-11 June 2011, Granada, Spain.

K1C

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Kinetics of paper degradation

Pass, Ami and Colston, Belinda and Knight, Barry (2013) Determining the kinetics of paper degradation in low oxygen atmospheres. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

LI0.5FE2.5-XCRXO4

Spiers, Hayley and Parkin, Ivan P. and Pankhurst, Quentin A. and Affleck, Louise and Green, Mark and Caruana, D. J. and Kuznetsov, Maxim V. and Yao, Jun and Vaughan , Gavin and Terry, Ann and Kvick, Ake (2004) Self propagating high temperature synthesis of magnesium zinc ferrites (MgxZn1-xFe2O3): thermal imaging and time resolved X-ray diffraction experiments. Journal of Materials Chemistry, 14 (7). pp. 1104-1111. ISSN 0959-9428

Laser

Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.

Laser Beam Brightness

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Laser Surface Engineering

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Laser Surface Treatment

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Laser surface treatment

Waugh, David (2011) Laser could light the way in joint surgery and save the NHS money. Lincolnshire Echo . ISSN 0962-5003

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

Laser treatment

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Lasers

Shukla, Pratik (2014) Fibre laser-interaction of technical ceramics during laser surface engineering. In: Laser Surface Engineering. Woodhead Publishing. ISBN UNSPECIFIED (In Press)

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by means of CO2 laser processing of a silicon nitride engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, July 2010, Manchester.

Shukla, Pratik and Lawrence, Jonathan (2014) Investigation of temperature distribution during CO2 and Fibre laser processing of Si3N4 engineering ceramic by means of a computational and experimental approach. Lasers In Engineering , 27 (3-4). pp. 135-160. ISSN 0898-1507

Shukla, Pratik and Lawrence, Jonathan (2009) Laser surface treatment of engineering ceramics and the effects thereof on fracture toughness. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009): Laser Materials Processing, 2 - 5 November 2009, Orlando, Florida, USA.

Shukla, Pratik and Lawrence, Jonathan (2013) Role of laser beam radiance in different ceramic processing: a two wavelengths comparison. Optics & Laser Technology, 54 . pp. 380-388. ISSN 0030-3992

Shukla, Pratik and Lawrence, Jonathan (2012) The influence of brightness during laser surface treatment of Si3N4 engineering ceramics. Optics and Lasers in Engineering, 50 (12). pp. 1746-1751. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan and Paul, Anish (2012) Influence of laser beam brightness during laser surface treatment of ZrO2 engineering ceramics. Lasers in Engineering, 22 (3/4). pp. 151-173. ISSN 0898-1507

Low oxygen environments

Pass, Ami and Colston, Belinda and Knight, Barry (2013) Determining the kinetics of paper degradation in low oxygen atmospheres. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

Pass, Ami and Colston, Belinda and Knight, Barry (2011) Influence of the environment on collections in mass storage. In: The Science of Objects and Collections, 11 April 2011, London.

Mass storage

Pass, Ami and Colston, Belinda and Knight, Barry (2011) Influence of the environment on collections in mass storage. In: The Science of Objects and Collections, 11 April 2011, London.

Mercury

Lummas, S. and Ruiz-Jimenez, J. and Luque de Castro, M. D. and Colston, Belinda and Gonzalez-Rodriguez, Jose and Chen, B. and Corns, W. (2011) Determination of Arsenic, Mercury and Barium in herbarium mount paper using dynamic ultrasound-assisted extraction prior to atomic fluorescence and absorption spectrometry. Analytical Letters, 44 (10). pp. 1842-1852. ISSN 0003-2719

Mesenchymal stem cell

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Microstructure

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Moisture content

Fielding, Nicole and Colston, Belinda and Goodman, Adrian (2013) Evaluating the use of agricultural moisture probes in the historic built environment. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

Moisture monitoring

Fielding, Nicole and Colston, Belinda and Goodman, Adrian (2013) Evaluating the use of agricultural moisture probes in the historic built environment. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

Moisture probes

Fielding, Nicole and Colston, Belinda and Goodman, Adrian (2013) Evaluating the use of agricultural moisture probes in the historic built environment. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

Morphology

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Morphology and composition

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Multivariate Analysis

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

Nanoparticle

Yao, Jun and Yao, Yufeng (2012) Characteristics of Pt on zeolite electrocatalyst for direct methanol fuel cell. In: The 2nd Int. Conf. on Engineering and Technology Innovation, 2-6 November 2012, Kaohsiung, Taiwan.

Natural pozzolans

Ampatzioglou, Eirini and Karatasios, Ioannis and Colston, Belinda and Watt, David and Kilikoglou, Vassilis (2008) The effect of natural pozzolans in conservation mortars. In: 5th Symposium of the Hellenic Society of Archaeometry, 8–10 October 2008, Athens, Greece.

NiTi

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

OXIDES

Spiers, Hayley and Parkin, Ivan P. and Pankhurst, Quentin A. and Affleck, Louise and Green, Mark and Caruana, D. J. and Kuznetsov, Maxim V. and Yao, Jun and Vaughan , Gavin and Terry, Ann and Kvick, Ake (2004) Self propagating high temperature synthesis of magnesium zinc ferrites (MgxZn1-xFe2O3): thermal imaging and time resolved X-ray diffraction experiments. Journal of Materials Chemistry, 14 (7). pp. 1104-1111. ISSN 0959-9428

PMMA

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Waugh, David and Lawrence, Jonathan (2009) Wettability characteristics variation of PMMA by means of CO2 laser generated surface patterns. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

POWDER

Spiers, Hayley and Parkin, Ivan P. and Pankhurst, Quentin A. and Affleck, Louise and Green, Mark and Caruana, D. J. and Kuznetsov, Maxim V. and Yao, Jun and Vaughan , Gavin and Terry, Ann and Kvick, Ake (2004) Self propagating high temperature synthesis of magnesium zinc ferrites (MgxZn1-xFe2O3): thermal imaging and time resolved X-ray diffraction experiments. Journal of Materials Chemistry, 14 (7). pp. 1104-1111. ISSN 0959-9428

Paper-based collections

Pass, Ami and Colston, Belinda and Knight, Barry (2011) Influence of the environment on collections in mass storage. In: The Science of Objects and Collections, 11 April 2011, London.

Phase Tranformation

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

Phase Transformation

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Photoelectron spectroscopy

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Platinum

Rose, Abigail and Crabb, Eleanor M. and Qian, Yangdong and Ravikumar, M. K. and Wells, Peter P. and Wiltshire, Richard J. K. and Yao, Jun and Bilsborrow, Robert and Mosselmans, Fred and Russell, Andrea E. (2007) Potential dependence of segregation and surface alloy formation of a Ru modified carbon supported Pt catalyst. Electrochimica Acta, 52 ( 19). pp. 5556-5564. ISSN 0013-4686

Porcine cortical bone

Bonney, Heather and Colston, Belinda and Goodman, Adrian (2011) Regional variation in the mechanical properties of cortical bone from the porcine femur. Medical Engineering and Physics, 33 (4). pp. 513-520. ISSN 1350-4533

Preventive conservation

Fielding, Nicole and Colston, Belinda and Goodman, Adrian (2013) Evaluating the use of agricultural moisture probes in the historic built environment. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

Pass, Ami and Colston, Belinda and Knight, Barry (2013) Determining the kinetics of paper degradation in low oxygen atmospheres. In: Eastern Analytical Symposium and Exposition, 18-20 November 2013, New Jersey, USA.

Principal Component Analysis

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

Processing

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Pt on Y zeolite catalyst

Yao, Jun and Yao, Yufeng (2012) Characteristics of Pt on zeolite electrocatalyst for direct methanol fuel cell. In: The 2nd Int. Conf. on Engineering and Technology Innovation, 2-6 November 2012, Kaohsiung, Taiwan.

Pyrolysis Products

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

Radiance (Brightness)

Shukla, Pratik and Lawrence, Jonathan (2013) Role of laser beam radiance in different ceramic processing: a two wavelengths comparison. Optics & Laser Technology, 54 . pp. 380-388. ISSN 0030-3992

Raman Spectroscopy

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

Remediation

Lummas, S. and Ruiz-Jimenez, J. and Luque de Castro, M. D. and Colston, Belinda and Gonzalez-Rodriguez, Jose and Chen, B. and Corns, W. (2011) Determination of Arsenic, Mercury and Barium in herbarium mount paper using dynamic ultrasound-assisted extraction prior to atomic fluorescence and absorption spectrometry. Analytical Letters, 44 (10). pp. 1842-1852. ISSN 0003-2719

Restoration mortars

Karatasios, Ioannis and Kilikoglou, Vassilis and Thlakis, Panagiotis and Colston, Belinda and Watt, David (2008) Sulphate resistance of lime-based barium mortars. Cement and Concrete Composites, 30 (9). pp. 815-821. ISSN 0958-9465

Ruthenium

Rose, Abigail and Crabb, Eleanor M. and Qian, Yangdong and Ravikumar, M. K. and Wells, Peter P. and Wiltshire, Richard J. K. and Yao, Jun and Bilsborrow, Robert and Mosselmans, Fred and Russell, Andrea E. (2007) Potential dependence of segregation and surface alloy formation of a Ru modified carbon supported Pt catalyst. Electrochimica Acta, 52 ( 19). pp. 5556-5564. ISSN 0013-4686

Rutherford backscattering spectrometry

Bonney, Heather and Colston, Belinda and Goodman, Adrian (2011) Regional variation in the mechanical properties of cortical bone from the porcine femur. Medical Engineering and Physics, 33 (4). pp. 513-520. ISSN 1350-4533

SHS

Spiers, Hayley and Parkin, Ivan P. and Pankhurst, Quentin A. and Affleck, Louise and Green, Mark and Caruana, D. J. and Kuznetsov, Maxim V. and Yao, Jun and Vaughan , Gavin and Terry, Ann and Kvick, Ake (2004) Self propagating high temperature synthesis of magnesium zinc ferrites (MgxZn1-xFe2O3): thermal imaging and time resolved X-ray diffraction experiments. Journal of Materials Chemistry, 14 (7). pp. 1104-1111. ISSN 0959-9428

Scanning electron microscopy

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Shape memory Ni-Ti alloys

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Shape memory alloys(SMA)

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Shock Processing

Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.

SiO2

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Silicon Nitride

Shukla, Pratik and Lawrence, Jonathan (2012) The influence of brightness during laser surface treatment of Si3N4 engineering ceramics. Optics and Lasers in Engineering, 50 (12). pp. 1746-1751. ISSN 0143-8166

Silicon nitride

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Shukla, Pratik and Lawrence, Jonathan (2012) A comparative study on the processing parameters during fibre and CO2 laser surface treatments of silicon nitride engineering ceramic. International Journal of Advanced Manufacturing Technology , 59 (1-4). pp. 143-155. ISSN 0268-3768

Surface Treatment

Shukla, Pratik and Lawrence, Jonathan (2012) A comparative study on the processing parameters during fibre and CO2 laser surface treatments of silicon nitride engineering ceramic. International Journal of Advanced Manufacturing Technology , 59 (1-4). pp. 143-155. ISSN 0268-3768

Shukla, Pratik and Lawrence, Jonathan (2012) The influence of brightness during laser surface treatment of Si3N4 engineering ceramics. Optics and Lasers in Engineering, 50 (12). pp. 1746-1751. ISSN 0143-8166

Surface modification

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Surface morphology, Coarse-grained structure

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Technical Ceramics

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by means of CO2 laser processing of a silicon nitride engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, July 2010, Manchester.

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Thermal Analysis

Shukla, Pratik and Lawrence, Jonathan (2010) Thermal analysis of fibre laser treated zirconia engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, 14 – 16 July 2010, Manchester, U.K..

Tinplated steel

Shukla, Pratik and Johnson, Trevor and Wu, Zouzheng (2007) Effects of high speed laser welding on tin plated steels applicable to manufacture three piece packaging cans. In: National Conference on Recent Developments & Futuristic Trends in Mechanical Engineering (NCME 2007) , 28 – 29 April 2007, Gwalior, India.

Topograpghy

Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.

Topographical

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Topography

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Ultrasound extraction

Lummas, S. and Ruiz-Jimenez, J. and Luque de Castro, M. D. and Colston, Belinda and Gonzalez-Rodriguez, Jose and Chen, B. and Corns, W. (2011) Determination of Arsenic, Mercury and Barium in herbarium mount paper using dynamic ultrasound-assisted extraction prior to atomic fluorescence and absorption spectrometry. Analytical Letters, 44 (10). pp. 1842-1852. ISSN 0003-2719

Vigna angularis

Goodman, A. M. and Giddings, J. J. (2009) A hard coat, a tough choice? The effects of host seed morphology and mechanics on the egg laying behaviour of the bruchid beetle, Callosobruchus maculatus. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology, Volume (Issue ). S130 -S131. ISSN 1095-6433

Vigna radiata

Goodman, A. M. and Giddings, J. J. (2009) A hard coat, a tough choice? The effects of host seed morphology and mechanics on the egg laying behaviour of the bruchid beetle, Callosobruchus maculatus. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology, Volume (Issue ). S130 -S131. ISSN 1095-6433

Vigna unguiculata

Goodman, A. M. and Giddings, J. J. (2009) A hard coat, a tough choice? The effects of host seed morphology and mechanics on the egg laying behaviour of the bruchid beetle, Callosobruchus maculatus. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology, Volume (Issue ). S130 -S131. ISSN 1095-6433

Wettability

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Waugh, David and Lawrence, Jonathan (2009) Wettability characteristics variation of PMMA by means of CO2 laser generated surface patterns. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

X ray photoemission spectroscopy, Cell culture

Chan, C. W. and Hussain, Issam and Waugh, David and Lawrence, Jonathan and Man, H. C. (2014) Effect of laser treatment on the attachment and viability of mesenchymal stem cell responses on shape memory NiTi alloy. Materials Science and Engineering C, 42 . pp. 254-263. ISSN 0928-4931

Young's Modulus

Bonney, Heather and Colston, Belinda and Goodman, Adrian (2011) Regional variation in the mechanical properties of cortical bone from the porcine femur. Medical Engineering and Physics, 33 (4). pp. 513-520. ISSN 1350-4533

Zirconia Ceramics

Shukla, Pratik and Lawrence, Jonathan and Paul, Anish (2012) Influence of laser beam brightness during laser surface treatment of ZrO2 engineering ceramics. Lasers in Engineering, 22 (3/4). pp. 151-173. ISSN 0898-1507

ZrO2 engineering ceramics

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

acid attack

Karatasios, Ioannis and Kilikoglou, Vassilis and Thlakis, Panagiotis and Colston, Belinda and Watt, David (2008) Sulphate resistance of lime-based barium mortars. Cement and Concrete Composites, 30 (9). pp. 815-821. ISSN 0958-9465

acid rain

Karatasios, Ioannis and Kilikoglou, Vassilis and Theoulakis, Panagiotis and Colston, Belinda and Watt, David (2008) A new approach to conservation mortars designed for the urban environment. In: Conservation Science 2007. Archetype, London, pp. 289-290. ISBN 9781904982340

ancient monuments

Kliafa, Maria and Colston, Belinda and Watt, David (2005) An investigation of bioremediation for the conservation of petroleum-contaminated stone monuments. PhD thesis, De Montfort University.

anisotropy

Goodman, A. M. and Haggis, Lindsay and Bonney, Heather (2007) Flexural properties of the equine hoof wall. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology , 146 (4). Page S118. ISSN 1095-6433

Goodman, A. M. and Haggis , L. (2008) Regional variation in the flexural properties of the equine hoof wall. Comparative Exercise Physiology , 5 . 161-168.. ISSN 1755-2540

archaeological bone

Brooks, H. W. and Goodman, A. M. and Colston, B. J. (2010) Investigating responses of archaeological bone to post-retrieval environment. In: ICAZ Animal Palaeopathology Working Group Conference, Katerini, 2010, 9-11 April 2010, Hecabe Centre, Katerini, Greece.

art practice

O'Hana, Sarah (2008) Science within art practice: a two way process. In: Student lecture, 2008, Jewellery Department, Dundee University.

barium hydroxide

Karatasios, Ioannis and Colston, Belinda and Watt, David (2005) The effect of barium hydroxide on the physicochemical properties of lime-based conservation mortars. PhD thesis, De Montfort University.

Karatasios, Ioannis and Kilikoglou, Vassilis and Theoulakis, Panagiotis and Colston, Belinda and Watt, David (2008) A new approach to conservation mortars designed for the urban environment. In: Conservation Science 2007. Archetype, London, pp. 289-290. ISBN 9781904982340

Karatasios, Ioannis and Kilikoglou, Vassilis and Thlakis, Panagiotis and Colston, Belinda and Watt, David (2008) Sulphate resistance of lime-based barium mortars. Cement and Concrete Composites, 30 (9). pp. 815-821. ISSN 0958-9465

bioactivity

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

bioactivity.

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

biocompatibility

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

biofunctionality

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

biological implants

Waugh, David (2011) Laser could light the way in joint surgery and save the NHS money. Lincolnshire Echo . ISSN 0962-5003

bioremediation

Kliafa, Maria and Colston, Belinda and Watt, David (2003) Evaluating the use of bioremediation techniques in the conservation of hydrocarbon-contaminated stone monuments. In: Conservation Science 2002. Archetype, London, pp. 135-140. ISBN 1873132883

Kliafa, Maria and Colston, Belinda and Watt, David (2005) An investigation of bioremediation for the conservation of petroleum-contaminated stone monuments. PhD thesis, De Montfort University.

bioventing

Kliafa, Maria and Colston, Belinda and Watt, David (2005) An investigation of bioremediation for the conservation of petroleum-contaminated stone monuments. PhD thesis, De Montfort University.

bmjcheck

Yao, Jun and Yao, Yufeng (2012) Characteristics of Pt on zeolite electrocatalyst for direct methanol fuel cell. In: The 2nd Int. Conf. on Engineering and Technology Innovation, 2-6 November 2012, Kaohsiung, Taiwan.

bmjtype

Ampatzioglou, Eirini and Karatasios, Ioannis and Colston, Belinda and Watt, David and Kilikoglou, Vassilis (2010) Lime-natural pozzolan conservation mortars: parameters that affect reactivity and strength. In: Historic Mortars and RILEM TC 203-RHM Final Workshop HMC 2010. Rilem Publications S.A.R.L., pp. 845-852. ISBN UNSPECIFIED

Kliafa, Maria and Colston, Belinda and Watt, David (2003) Evaluating the use of bioremediation techniques in the conservation of hydrocarbon-contaminated stone monuments. In: Conservation Science 2002. Archetype, London, pp. 135-140. ISBN 1873132883

Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.

bond lengths

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

calcium phosphate formation

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

carbon

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

catalysts

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

cellulose microfibril orientation

Goodman, A. M. (2005) Mechanical adaptations of cleavers (Galium aparine). Annals of Botany, 95 (3). pp. 475-480. ISSN 0305-7364

chemical

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

communication

O'Hana, Sarah and Turner, Lesley (2011) The power of communication through art jewellery. In: New Directions in the Humanities, 8-11 June 2011, Granada, Spain.

conservation

Karatasios, Ioannis and Kilikoglou, Vassilis and Thlakis, Panagiotis and Colston, Belinda and Watt, David (2008) Sulphate resistance of lime-based barium mortars. Cement and Concrete Composites, 30 (9). pp. 815-821. ISSN 0958-9465

Kliafa, Maria and Colston, Belinda and Watt, David (2003) Evaluating the use of bioremediation techniques in the conservation of hydrocarbon-contaminated stone monuments. In: Conservation Science 2002. Archetype, London, pp. 135-140. ISBN 1873132883

conservation mortars

Ampatzioglou, Eirini and Karatasios, Ioannis and Colston, Belinda and Watt, David and Kilikoglou, Vassilis (2008) The effect of natural pozzolans in conservation mortars. In: 5th Symposium of the Hellenic Society of Archaeometry, 8–10 October 2008, Athens, Greece.

Karatasios, Ioannis and Colston, Belinda and Watt, David (2005) The effect of barium hydroxide on the physicochemical properties of lime-based conservation mortars. PhD thesis, De Montfort University.

Karatasios, Ioannis and Kilikoglou, Vassilis and Theoulakis, Panagiotis and Colston, Belinda and Watt, David (2008) A new approach to conservation mortars designed for the urban environment. In: Conservation Science 2007. Archetype, London, pp. 289-290. ISBN 9781904982340

conservation strategies

Colston, Belinda and Fielding, Nicole and Blakeley, Ronald (2013) Optimising the internal environment for the long-term conservation of North Foreland Lighthouse. In: IALA2013, 3-7 June 2013, Piraeus, Greece.

contact angle

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

contemporary jewellery

O'Hana, Sarah (2009) Laser processing on titanium for contemporary jewellery: a bridge between cultures. In: Lecture: Laser Processing on Titanium for Contemporary Jewellery: A Bridge between Cultures, 2009, Textiles Dept, School of Materials, University of Manchester.

O'Hana, Sarah (2008) Science within art practice: a two way process. In: Student lecture, 2008, Jewellery Department, Dundee University.

O'Hana, Sarah (2010) Brooch and Pendant. [Artefact]

O'Hana, Sarah (2008) Laser marking of titanium for contemporary jewellery and the process of scientific knowledge transfer. In: Coutts London Jewellery Week, 11 - 15 June 2008, Institute of Materials, Minerals and Mining (IOM), Carlton Terrace, London.

O'Hana, Sarah (2008) Laser marking titanium for contemporary jewellery. In: School Mechanical, Aerospace and Civil Engineering Conference, 2008.

degradation

Brooks, H. W. and Goodman, A. M. and Colston, B. J. (2010) Investigating responses of archaeological bone to post-retrieval environment. In: ICAZ Animal Palaeopathology Working Group Conference, Katerini, 2010, 9-11 April 2010, Hecabe Centre, Katerini, Greece.

egg laying behaviour

Goodman, A. M. and Giddings, J. J. (2009) A hard coat, a tough choice? The effects of host seed morphology and mechanics on the egg laying behaviour of the bruchid beetle, Callosobruchus maculatus. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology, Volume (Issue ). S130 -S131. ISSN 1095-6433

electrochemistry

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

environmental monitoring

Buelow, Anna and Watt, David and Colston, Belinda (2003) Microenvironments within glass-fronted book cases: a study comparing environmental changes within books and interactions with local environments. Papier Restaurierung, 4 (3). pp. 23-31. ISSN 1563-2628

equine

Goodman, A. M. and Haggis , L. (2008) Regional variation in the flexural properties of the equine hoof wall. Comparative Exercise Physiology , 5 . 161-168.. ISSN 1755-2540

fabric deterioration

Colston, Belinda and Fielding, Nicole and Blakeley, Ronald (2013) Optimising the internal environment for the long-term conservation of North Foreland Lighthouse. In: IALA2013, 3-7 June 2013, Piraeus, Greece.

femur

Bonney, Heather and Colston, Belinda and Goodman, Adrian (2011) Regional variation in the mechanical properties of cortical bone from the porcine femur. Medical Engineering and Physics, 33 (4). pp. 513-520. ISSN 1350-4533

fluorescence

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

ground pollution

Kliafa, Maria and Colston, Belinda and Watt, David (2005) An investigation of bioremediation for the conservation of petroleum-contaminated stone monuments. PhD thesis, De Montfort University.

hardness

Brooks, H. W. and Goodman, A. M. and Colston, B. J. (2010) Investigating responses of archaeological bone to post-retrieval environment. In: ICAZ Animal Palaeopathology Working Group Conference, Katerini, 2010, 9-11 April 2010, Hecabe Centre, Katerini, Greece.

Goodman, A. M. and Giddings, J. J. (2009) A hard coat, a tough choice? The effects of host seed morphology and mechanics on the egg laying behaviour of the bruchid beetle, Callosobruchus maculatus. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology, Volume (Issue ). S130 -S131. ISSN 1095-6433

historic lighthouses

Colston, Belinda and Fielding, Nicole and Blakeley, Ronald (2013) Optimising the internal environment for the long-term conservation of North Foreland Lighthouse. In: IALA2013, 3-7 June 2013, Piraeus, Greece.

historic masonry

Colston, Belinda and Fielding, Nicole and Blakeley, Ronald (2013) Optimising the internal environment for the long-term conservation of North Foreland Lighthouse. In: IALA2013, 3-7 June 2013, Piraeus, Greece.

hoof

Goodman, A. M. and Haggis, Lindsay and Bonney, Heather (2007) Flexural properties of the equine hoof wall. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology , 146 (4). Page S118. ISSN 1095-6433

hydrocarbons

Kliafa, Maria and Colston, Belinda and Watt, David (2003) Evaluating the use of bioremediation techniques in the conservation of hydrocarbon-contaminated stone monuments. In: Conservation Science 2002. Archetype, London, pp. 135-140. ISBN 1873132883

ignitable liquids

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

jewellery

O'Hana, Sarah (2010) Cruzando fronteras. In: Cruzando Fronteras, 12-16 April 2010, Gray Area, Symposium, Biblioteca de Mexico, Mexico.

laser

O'Hana, Sarah and Turner, Lesley (2011) The power of communication through art jewellery. In: New Directions in the Humanities, 8-11 June 2011, Granada, Spain.

laser marking

O'Hana, Sarah (2008) Laser marking of titanium for contemporary jewellery and the process of scientific knowledge transfer. In: Coutts London Jewellery Week, 11 - 15 June 2008, Institute of Materials, Minerals and Mining (IOM), Carlton Terrace, London.

laser processing

O'Hana, Sarah (2009) Laser processing on titanium for contemporary jewellery: a bridge between cultures. In: Lecture: Laser Processing on Titanium for Contemporary Jewellery: A Bridge between Cultures, 2009, Textiles Dept, School of Materials, University of Manchester.

O'Hana, Sarah (2010) Brooch and Pendant. [Artefact]

O'Hana, Sarah (2008) Laser marking titanium for contemporary jewellery. In: School Mechanical, Aerospace and Civil Engineering Conference, 2008.

laser surface patterning

Waugh, David and Lawrence, Jonathan (2009) Wettability characteristics variation of PMMA by means of CO2 laser generated surface patterns. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..

laser surface treatment

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

lighthouse

Colston, Belinda and Watt, David (2008) Non-destructive investigation of a historic English lighthouse. In: 1st International Conference on Construction Heritage in Coastal and Marine Environments: damage, diagnostics, maintenance and rehabilitation, 28–30 January 2008, Lisbon, Portugal.

lime

Ampatzioglou, Eirini and Karatasios, Ioannis and Colston, Belinda and Watt, David and Kilikoglou, Vassilis (2010) Lime-natural pozzolan conservation mortars: parameters that affect reactivity and strength. In: Historic Mortars and RILEM TC 203-RHM Final Workshop HMC 2010. Rilem Publications S.A.R.L., pp. 845-852. ISBN UNSPECIFIED

Karatasios, Ioannis and Kilikoglou, Vassilis and Thlakis, Panagiotis and Colston, Belinda and Watt, David (2008) Sulphate resistance of lime-based barium mortars. Cement and Concrete Composites, 30 (9). pp. 815-821. ISSN 0958-9465

lime-based mortars

Karatasios, Ioannis and Colston, Belinda and Watt, David (2005) The effect of barium hydroxide on the physicochemical properties of lime-based conservation mortars. PhD thesis, De Montfort University.

material analysis

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

materials science

O'Hana, Sarah and Turner, Lesley (2011) The power of communication through art jewellery. In: New Directions in the Humanities, 8-11 June 2011, Granada, Spain.

mechanical properties

Goodman, A. M. and Giddings, J. J. (2009) A hard coat, a tough choice? The effects of host seed morphology and mechanics on the egg laying behaviour of the bruchid beetle, Callosobruchus maculatus. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology, Volume (Issue ). S130 -S131. ISSN 1095-6433

Goodman, A. M. and Haggis, Lindsay and Bonney, Heather (2007) Flexural properties of the equine hoof wall. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology , 146 (4). Page S118. ISSN 1095-6433

Goodman, A. M. and Haggis , L. (2008) Regional variation in the flexural properties of the equine hoof wall. Comparative Exercise Physiology , 5 . 161-168.. ISSN 1755-2540

moisture content

Colston, Belinda and Fielding, Nicole and Blakeley, Ronald (2013) Optimising the internal environment for the long-term conservation of North Foreland Lighthouse. In: IALA2013, 3-7 June 2013, Piraeus, Greece.

moisture movement

Colston, Belinda and Fielding, Nicole and Blakeley, Ronald (2013) Optimising the internal environment for the long-term conservation of North Foreland Lighthouse. In: IALA2013, 3-7 June 2013, Piraeus, Greece.

molybdenum

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

non-destructive testing

Colston, Belinda and Watt, David (2008) Non-destructive investigation of a historic English lighthouse. In: 1st International Conference on Construction Heritage in Coastal and Marine Environments: damage, diagnostics, maintenance and rehabilitation, 28–30 January 2008, Lisbon, Portugal.

nylon 6 6

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

nylon 66

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

osteoblast cells

Waugh, David and Lawrence, Jonathan (2012) Generic parameters governing the biofunctionality of laser surface engineered nylon 6,6. In: ICALEO 2012, 23rd - 27th September 2012, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

ovine

Brooks, H. W. and Goodman, A. M. and Colston, B. J. (2010) Investigating responses of archaeological bone to post-retrieval environment. In: ICAZ Animal Palaeopathology Working Group Conference, Katerini, 2010, 9-11 April 2010, Hecabe Centre, Katerini, Greece.

oxidation

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

paper-based collections

Buelow, Anna and Watt, David and Colston, Belinda (2003) Microenvironments within glass-fronted book cases: a study comparing environmental changes within books and interactions with local environments. Papier Restaurierung, 4 (3). pp. 23-31. ISSN 1563-2628

plastics

Gonzalez-Rodriguez, Jose and Sisons, Natalie and Robinson, Sally (2011) Fire debris analysis by Raman spectroscopy and chemometrics. Journal of Analytical and Applied Pyrolysis, 91 (1). pp. 210-218. ISSN 0165-2370

platinum

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

pollution

Kliafa, Maria and Colston, Belinda and Watt, David (2003) Evaluating the use of bioremediation techniques in the conservation of hydrocarbon-contaminated stone monuments. In: Conservation Science 2002. Archetype, London, pp. 135-140. ISBN 1873132883

post-retrieval environment

Brooks, H. W. and Goodman, A. M. and Colston, B. J. (2010) Investigating responses of archaeological bone to post-retrieval environment. In: ICAZ Animal Palaeopathology Working Group Conference, Katerini, 2010, 9-11 April 2010, Hecabe Centre, Katerini, Greece.

pozzolanic reactivity

Ampatzioglou, Eirini and Karatasios, Ioannis and Colston, Belinda and Watt, David and Kilikoglou, Vassilis (2010) Lime-natural pozzolan conservation mortars: parameters that affect reactivity and strength. In: Historic Mortars and RILEM TC 203-RHM Final Workshop HMC 2010. Rilem Publications S.A.R.L., pp. 845-852. ISBN UNSPECIFIED

pozzolans

Ampatzioglou, Eirini and Karatasios, Ioannis and Colston, Belinda and Watt, David and Kilikoglou, Vassilis (2010) Lime-natural pozzolan conservation mortars: parameters that affect reactivity and strength. In: Historic Mortars and RILEM TC 203-RHM Final Workshop HMC 2010. Rilem Publications S.A.R.L., pp. 845-852. ISBN UNSPECIFIED

preventive conservation

Buelow, Anna and Watt, David and Colston, Belinda (2003) Microenvironments within glass-fronted book cases: a study comparing environmental changes within books and interactions with local environments. Papier Restaurierung, 4 (3). pp. 23-31. ISSN 1563-2628

science

O'Hana, Sarah (2010) Cruzando fronteras. In: Cruzando Fronteras, 12-16 April 2010, Gray Area, Symposium, Biblioteca de Mexico, Mexico.

seed

Goodman, A. M. and Giddings, J. J. (2009) A hard coat, a tough choice? The effects of host seed morphology and mechanics on the egg laying behaviour of the bruchid beetle, Callosobruchus maculatus. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology, Volume (Issue ). S130 -S131. ISSN 1095-6433

simulated body fluid

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

simulated body fluid (SBF)

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

stone monuments

Kliafa, Maria and Colston, Belinda and Watt, David (2003) Evaluating the use of bioremediation techniques in the conservation of hydrocarbon-contaminated stone monuments. In: Conservation Science 2002. Archetype, London, pp. 135-140. ISBN 1873132883

stratum medium

Goodman, A. M. and Haggis, Lindsay and Bonney, Heather (2007) Flexural properties of the equine hoof wall. Comparative Biochemistry and Physiology Part A: Molecular & Integrative Physiology , 146 (4). Page S118. ISSN 1095-6433

Goodman, A. M. and Haggis , L. (2008) Regional variation in the flexural properties of the equine hoof wall. Comparative Exercise Physiology , 5 . 161-168.. ISSN 1755-2540

sulphates

Karatasios, Ioannis and Kilikoglou, Vassilis and Theoulakis, Panagiotis and Colston, Belinda and Watt, David (2008) A new approach to conservation mortars designed for the urban environment. In: Conservation Science 2007. Archetype, London, pp. 289-290. ISBN 9781904982340

Karatasios, Ioannis and Kilikoglou, Vassilis and Thlakis, Panagiotis and Colston, Belinda and Watt, David (2008) Sulphate resistance of lime-based barium mortars. Cement and Concrete Composites, 30 (9). pp. 815-821. ISSN 0958-9465

surface treatment

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

Waugh, David and Lawrence, Jonathan (2012) Modulating calcium phosphate formation using CO2 laser engineering of a polymeric material. Materials Science and Engineering: C, 32 (2). pp. 189-200. ISSN 0928-4931

titanium

O'Hana, Sarah (2009) Laser processing on titanium for contemporary jewellery: a bridge between cultures. In: Lecture: Laser Processing on Titanium for Contemporary Jewellery: A Bridge between Cultures, 2009, Textiles Dept, School of Materials, University of Manchester.

O'Hana, Sarah (2010) Brooch and Pendant. [Artefact]

O'Hana, Sarah (2008) Laser marking of titanium for contemporary jewellery and the process of scientific knowledge transfer. In: Coutts London Jewellery Week, 11 - 15 June 2008, Institute of Materials, Minerals and Mining (IOM), Carlton Terrace, London.

O'Hana, Sarah (2008) Laser marking titanium for contemporary jewellery. In: School Mechanical, Aerospace and Civil Engineering Conference, 2008.

titanium oxide

O'Hana, Sarah (2010) Cruzando fronteras. In: Cruzando Fronteras, 12-16 April 2010, Gray Area, Symposium, Biblioteca de Mexico, Mexico.

toughness

Bonney, Heather and Colston, Belinda and Goodman, Adrian (2011) Regional variation in the mechanical properties of cortical bone from the porcine femur. Medical Engineering and Physics, 33 (4). pp. 513-520. ISSN 1350-4533

transmission electron microscopy

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

two way process

O'Hana, Sarah (2008) Science within art practice: a two way process. In: Student lecture, 2008, Jewellery Department, Dundee University.

wettability

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan and Brown, Eleanor (2012) Osteoblast cell response to a CO2 laser modified polymeric material. Optics and Lasers in Engineering, 50 (2). pp. 236-247. ISSN 0143-8166

Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931

This list was generated on Fri Oct 31 23:33:12 2014 GMT.