Items where Division is "College of Science > School of Engineering" and Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type | No Grouping
ASE Ablation Absolute error Accurate estimation Accurate prediction Active safety Active suspension control systems Adaptive fuzzy Advanced control Advanced control strategy Advanced technology Air compressibility Aircraft taxiing Alloy steel Alpha rhythms Alzheimer's Disease Alzheimer's disease Alzheimers Disease Analysis and modeling Analysis results Argonne National Laboratory Arrival time Atomistic potential Axial displacements Axial strain Bayesian methods Bivariate response Blade Boolean functions Boolean logic Brake control Braking control CFD CMOS integrated circuits CMOS logic circuits CMOS technology CO2 Laser CO2 laser Cascaded system Cauchy-Born rule Ceramics Clocks Closed-loop Closed-loop control Collision avoidance Collision risks Competitiveness Compositional characterization Computer architecture Computer science Computer simulation Condition monitoring Continuum mechanics Control modes Control problems Controlled auto ignition (CAI) Cosserat theory Cost escalation Crash data Crash rate Crash risk DC link voltage stabilisation Data sets De-noising methods Differential mode Displacement signals Disturbance observer Disturbance rejection Drive train Driving conditions Driving cycle Driving distance Dynamic stiffness Electric energies Electroencephalogram Energy cost Energy efficiency Energy efficient Energy saving Energy utilization Engines Environmental modeling and simulation Equilibrium point Errors Estimation Excimer Feature Excimer laser Experiment FGF2 FGF2 diffusion Fault tolerance Feedback linearisation Feedback linearization Feedback linearization methods Fibre Laser Fibre Laser surface treatment Finite Element Modelling (FEM) Flamanville 3 Fracture Toughness (K1c) Fracture toughness (K1c) Frequency filters Friction materials Fuel consumption Future driver assistance systems Fuzzy Rule-Based Systems Gas Turbine Gas Turbines Gas turbines Genetic Programming Genetic algorithms Georgiadis Governance Gradient operators Grid dimension HIV Hardness Hardware-in-the-loop Hausdorff metric. Heat transfer Heating control Heparan Sulphate Heuristics Highway accidents Homogeneous charge compression ignition (HCCI) Hot rolling process Human drivers Hybrid electric vehicle (HEV) Hyper-Heuristics Immune algorithms Industrial development Industrial systems Input-output Integrated approach Integrated circuit modeling Integrated control Integrated systems Intelligent Control Intelligent buildings Joint analysis K1C Large project Laser Laser Beam Brightness Laser Processing Laser Surface Engineering Laser Surface Treatment Laser induced phosphorescence (LIP) Laser surface treatment Lateral acceleration Lateral control Lateral deviation Left turns Linear systems Liquid Immersion Load positions Local distribution networks Logic functions Long-term strategy Longitudinal acceleration MEMS Magnetic Gears Magnetic couplings Magnetic gear Manufacturing Matlab code Matlab-Simulink Mean square error sense Measured speed Measurement process Mechanical properties Meta-Heuristics Metal industries Michigan Microstructure Microstructure and mechanical properties Migration Modal analysis Mode-switching Moment capacity Multi objective Multi-firm project Multi-objective scheduling problems Multiobjective immune optimisation Multiobjective optimization Multiple equilibrium Navigation Neural mass model Neural mass models Non-Linearity Non-linear Non-linear controllers Non-linearity errors Nonlinear inputs Nonlinear phase peak constrained FIR filter design Nonlinear systems Not-financial evaluation Nuclear power plant project OFDMA downlink Observability, Position control Olkiluoto 3 Operational test Optimal block matched motion estimation Optimal control theory Optimal controls Optimal decentralized spectral resource allocation Optimal performance Optimal response Optimal routes Optimal scheduling Optimal sequence Optimal strategies Optimization Optimum controllers Passenger vehicles Path control Permission Phase Tranformation Phase Transformation Physically based models Plug-In Hybrid Electric Vehicle Pneumatic Cylinders Pneumatic actuators Pneumatic drives, Pneumatic equipment Pneumatic system Portfolio analysis Position errors Post-impact Power dissipation Power-train systems Practical systems Predictive control Principal component analysis Prior estimates Processing Product quality Project network Proportional plus derivatives QCA circuit design QCAPro Quality Random processes Real-time estimation Remote monitoring and sensing Response surfaces Risetimes Risk Risk factors Road departures Robust control Robustness Rolled products Rolling mills Rolling process Rolling schedules Room SBF SMR Sample sizes Second order interpolative sigma delta modulators Sensor validation Series-hybrid vehicle Servo Control Set-point tracking Set-valued discrete systems SiO2 Silicon nitride Simulated signals Simulation studies Simulation-based Single cylinder optical engine Siting Small power plants Speckle patterns Speed control, Acceleration State Estimators Statistical dependencies Statistical power Steady State FEA Steel metallurgy, Hot rolling Stochastic process Switching circuits Symbiotic modelling approach, Algorithms System description Systems analysis, MATLAB Technical Ceramics Temporal distribution Time windows Topographical Topography Torque disturbance Torque transfer, Controllers Tracking controls Transient temperature distribution Transportation research Tyre forces Ultrasound elastography Uncertainty Unified approach, Statistical methods, Highway accidents University of Michigan, Electric vehicles Vehicle acceleration Vehicle dynamics Vehicle forces Vehicle motion Vehicle speed, Automobile drivers Vehicles, Braking Velocity profiles, Control Water Coverage Willow Yaw velocity, Brakes ZrO2 engineering ceramics active delta wings adaptive gradient vector step size approach. adiabatic cooling effectiveness aerodynamic loads airport energy minimisation airwake alpha rhythms analytical optimization arbitrary pixel precisions audio hearing aids avian influenza bias bioactivity biocompatibility biological implants biologically inspired problem solving bmjdoi bmjfind bmjtype brain oscillations cellular automata chaos control chaotic behavior chaotification char chemical combustion complex network complex networks consensus contact angle control control system synthesis convection cooling hole geometry cosine modulated filter banks cough analysis defect tolerance delay distributional chaos in a sequence early stopping elastogram elastograms electroencephalogram ensembling error analysis error power estimation excitation of NNMs fault tolerance fin stack finite element modelling fractal behavior functional inequality constrained optimization problem gas turbines global stability. group delay heat pipes heat transfer enhancement helicopter loads heuristics hybrid nano/CMOS hybrid nano/CMOS computing architecture hyper-heuristics identification technology large engineering projects laser materials processing laser processing laser surface treatment limit cycle behavior lookup-table low delay macro/femto networks meta-heuristics minimax minimax passband group delay modified filled function method. multimodal functions nanoelectronics neural mass model non-adiabatic switching power loss non-linear block matched motion model nonlinear control systems nonlinear optimization nonlinear phase FIR filter design nonuniform filter bank nonuniform filter banks nuclear power plants nylon 66 optimal control optimisation optimism bias optimization osteoblast cells perfect reconstruction pericellular matrix periodic points pilot workload polarization error estimation predictive maintenance probabilistic automata probabilistic modeling tool quadratic NP hard optimization problem quantum computing quantum dot cellular automata quantum dots railway vehicle real-time wavelet kernel design regenerative medicine reliability repair techniques robust control sensors shape optimisation simulated body fluid (SBF) single step analytical solution. state space subdivision technique surface free energy surface modification suspensions (mechanical components) synaptic connectivity synchronization system biology table lookup tagged repair thalamo-cortico-thalamic circuitry theta rhythms tilt control torrefaction trend extraction two stage filtering variance vortex generators water tunnel tests wettability wettability characteristics
Number of items: 484.

ASE

Benmesbah, Lamia and Ling, Wing-Kuen and Chandrasekhar, Vikram and Chu, Xiaoli and Dohler, Mischa (2011) Optimal decentralized spectral resource allocation for OFDMA downlink of femto networks via adaptive gradient vector step size approach. American Journal of Engineering and Applied Sciences, 4 (4). pp. 491-496. ISSN 1941-7020

Ablation

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Absolute error

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Accurate estimation

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Accurate prediction

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Active safety

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Active suspension control systems

Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2011) Integrated tilt with active lateral secondary suspension control for high speed railway vehicles. Mechatronics, 21 (6). pp. 1108-1122. ISSN 0957-4158

Adaptive fuzzy

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Advanced control

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Advanced control strategy

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Advanced technology

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Air compressibility

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Aircraft taxiing

Chen, Jun and Ravizza, Stefan and Atkin, Jason and Stewart, Paul (2011) On the utilisation of fuzzy rule-based systems for taxi time estimations at airports. In: 11th Workshop on Algorithmic Approaches for Transportation Modelling, Optimization, and Systems, 8th September 2011, Saarbrucken, Germany.

Chen, Jun and Stewart, Paul (2011) Planning aircraft taxiing trajectories via a multi-objective immune optimisation. In: Natural Computation (ICNC), 2011 Seventh International Conference on, 26-28 July 2011, Shanghai, China.

Alloy steel

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Alpha rhythms

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Alpha and theta rhythm abnormality in Alzheimer's disease: a study using a computational model. In: From brains to systems. Advances in Experimental Medicine and Biology, 718 . Springer, New York, pp. 57-73. ISBN 9781461401643

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam P. (2011) A thalamo-cortico-thalamic neural mass model to study alpha rhythms in Alzheimer's disease. Neural Networks, 24 (6). pp. 631-645. ISSN 0893-6080

Alzheimer's Disease

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Alpha and theta rhythm abnormality in Alzheimer's disease: a study using a computational model. In: From brains to systems. Advances in Experimental Medicine and Biology, 718 . Springer, New York, pp. 57-73. ISBN 9781461401643

Alzheimer's disease

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Assessing retino-geniculo-cortical connectivities in Alzheimer’s disease with a neural mass model. In: IEEE Symposium Series on Computational Intelligence: Cognitive Algorithms, Mind and Brain, April 2011, Paris.

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam P. (2011) A thalamo-cortico-thalamic neural mass model to study alpha rhythms in Alzheimer's disease. Neural Networks, 24 (6). pp. 631-645. ISSN 0893-6080

Alzheimers Disease

sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Synaptic deficiency in Alzheimer disease and its implications on thalamic and cortical oscillations: a study using a neural mass model. In: 11th UKCI workshop, 7th-9th September 2011, Manchester.

Analysis and modeling

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Analysis results

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Argonne National Laboratory

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Arrival time

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Atomistic potential

Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one- and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.

Axial displacements

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Axial strain

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Bayesian methods

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Bivariate response

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Blade

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

Boolean functions

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

Boolean logic

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

Brake control

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Braking control

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

CFD

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

CMOS integrated circuits

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

CMOS logic circuits

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

CMOS technology

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

CO2 Laser

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

CO2 laser

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Cascaded system

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Cauchy-Born rule

Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one- and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.

Ceramics

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Clocks

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Closed-loop

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Closed-loop control

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Collision avoidance

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Collision risks

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Competitiveness

Locatelli, Giorgio and Mancini, Mauro (2011) The role of the reactor size for an investment in the nuclear sector: an evaluation of not-financial parameters. Progress in Nuclear Energy, 53 (2). pp. 212-222. ISSN 0149-1970

Compositional characterization

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Computer architecture

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

Computer science

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

Computer simulation

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Condition monitoring

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Continuum mechanics

Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one- and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.

Control modes

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Control problems

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Controlled auto ignition (CAI)

Jin, Seong-Ho and Bai, Shuzhan and Zhao, Hua (2011) On the use of planar laser-induced phosphorescence (PLIP) for combustion temperature measurement in SI engines. In: UnICERG meeting, March 2011.

Cosserat theory

Zhang, Yu (2011) Single-walled carbon nanotube modelling based on one- and two-dimensional Cosserat continua. PhD thesis, University of Nottingham.

Cost escalation

Locatelli, Giorgio and Mancini, Mauro (2011) Looking back to see the future: building nuclear power plants in Europe. Construction Management and Economics, 30 (8). pp. 623-637. ISSN 0144-6193

Crash data

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Crash rate

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Crash risk

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

DC link voltage stabilisation

Gladwin, D. and Stewart, P. and Stewart, J. (2011) Internal combustion engine control for series hybrid electric vehicles by parallel and distributed genetic programming/multiobjective genetic algorithms. International Journal of Systems Science - Computational Intelligence for Modelling and Control of Advanced Automotive Drivetrains, 42 (2). pp. 249-261. ISSN 0020-7721

Data sets

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

De-noising methods

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Differential mode

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Displacement signals

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Disturbance observer

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Yang, Jun and Zolotas, Argyrios and Chen, Wen-Hua and Michail, Konstantinos and Li, Shihua (2011) Robust control of nonlinear MAGLEV suspension system with mismatched uncertainties via DOBC approach. ISA Transactions, 50 (3). 389 - 396. ISSN 0019-0578

Disturbance rejection

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Drive train

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Driving conditions

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Driving cycle

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Driving distance

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Dynamic stiffness

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Electric energies

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Electroencephalogram

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Alpha and theta rhythm abnormality in Alzheimer's disease: a study using a computational model. In: From brains to systems. Advances in Experimental Medicine and Biology, 718 . Springer, New York, pp. 57-73. ISBN 9781461401643

Energy cost

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Energy efficiency

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Energy efficient

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Energy saving

Horikiri, Kana and Yao, Yufeng and Yao, Jun (2011) Numerical simulation of convective airflow in an empty room. International Journal of Energy and Environment, 5 (1). pp. 574-581. ISSN 1109-9577

Rogers, Dan and Foster, Martin P. and Bingham, Chris (2011) Simulation of a scheduling control scheme for domestic central heating systems in the UK. In: Applied Simulation and Modelling (ASM 2011), June 22-24, 2011, Crete, Greece.

Energy utilization

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Engines

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A controlled migration genetic algorithm operator for hardware-in-the-loop experimentation. Engineering Applications of Artificial Intelligence, 24 (4). pp. 586-594. ISSN 0952-1976

Environmental modeling and simulation

Rogers, Dan and Foster, Martin P. and Bingham, Chris (2011) Simulation of a scheduling control scheme for domestic central heating systems in the UK. In: Applied Simulation and Modelling (ASM 2011), June 22-24, 2011, Crete, Greece.

Equilibrium point

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Errors

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Estimation

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Excimer Feature

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Excimer laser

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

Experiment

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

FGF2

Fernig, D. G. and Stewart, Paul (2011) Heparan sulfate determines the modes of diffusion of fibroblast growth factor 2 within the pericellular matrix. In: ICMAT2011 International Conference on Materials for Advanced Technologies, 26 Jun - 1 Jul 2011, Suntec, Singapore.

FGF2 diffusion

Fernig, D. G. and Stewart, Paul (2011) Heparan sulfate determines the modes of diffusion of fibroblast growth factor 2 within the pericellular matrix. In: ICMAT2011 International Conference on Materials for Advanced Technologies, 26 Jun - 1 Jul 2011, Suntec, Singapore.

Fault tolerance

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

Feedback linearisation

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Feedback linearization

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Feedback linearization methods

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Fibre Laser

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Fibre Laser surface treatment

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

Finite Element Modelling (FEM)

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Flamanville 3

Ruuska, Inkeri and Ahola, Tuomas and Artto, Karlos and Locatelli, Giorgio and Mancini, Mauro (2011) A new governance approach for multi-firm projects: lessons from Olkiluoto 3 and Flamanville 3 nuclear power plant projects. International Journal of Project Management, 29 (6). pp. 647-660. ISSN 0263-7863

Fracture Toughness (K1c)

Shukla, Pratik and Lawrence, Jonathan (2011) Evaluation of fracture toughness of ZrO2 and Si3N4 engineering ceramics following CO2 and fibre laser surface treatment. Optics and Lasers in Engineering, 49 (2). pp. 229-239. ISSN 0143-8166

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Fracture toughness (K1c)

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Frequency filters

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Friction materials

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Fuel consumption

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Future driver assistance systems

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Fuzzy Rule-Based Systems

Chen, Jun and Ravizza, Stefan and Atkin, Jason and Stewart, Paul (2011) On the utilisation of fuzzy rule-based systems for taxi time estimations at airports. In: 11th Workshop on Algorithmic Approaches for Transportation Modelling, Optimization, and Systems, 8th September 2011, Saarbrucken, Germany.

Gas Turbine

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Gas Turbines

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Gas turbines

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Genetic Programming

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A novel genetic programming approach to the design of engine control systems for the voltage stabilisation of hybrid electric vehicle generator outputs. Proceedings of the Institute of Mechanical Engineers Part D - Journal of Automobile Engineering., 225 (10). pp. 1334-1346. ISSN 0954-4070

Genetic algorithms

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A controlled migration genetic algorithm operator for hardware-in-the-loop experimentation. Engineering Applications of Artificial Intelligence, 24 (4). pp. 586-594. ISSN 0952-1976

Georgiadis

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2011) Mode shapes variation of a composite beam with piezoelectric patches. Transaction of Aviation Institute / Prace- Instytut Lotnictwa , 218 . pp. 36-43. ISSN 0509-6669

Georgiades, Fotios and Warminski, Jerzy (2011) Excitation of a localized nonlinear normal mode of a bladed disk assembly lump mass nonlinear model. Transactions of Aviation Institute / Prace- Instytut Lotnictwa, 218 (12). pp. 28-35. ISSN 0509-6669

Governance

Ruuska, Inkeri and Ahola, Tuomas and Artto, Karlos and Locatelli, Giorgio and Mancini, Mauro (2011) A new governance approach for multi-firm projects: lessons from Olkiluoto 3 and Flamanville 3 nuclear power plant projects. International Journal of Project Management, 29 (6). pp. 647-660. ISSN 0263-7863

Gradient operators

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Grid dimension

Locatelli, Giorgio and Mancini, Mauro (2011) Large and small baseload power plants: drivers to define the optimal portfolios. Energy Policy, 39 (12). pp. 7762-7775. ISSN 0301-4215

HIV

Ling, Wing-Kuen (2011) System biology and signal processing for biomedical applications. [Teaching Resource] (Unpublished)

Hardness

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Hardware-in-the-loop

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A controlled migration genetic algorithm operator for hardware-in-the-loop experimentation. Engineering Applications of Artificial Intelligence, 24 (4). pp. 586-594. ISSN 0952-1976

Hausdorff metric.

Wang, Lidong and Gao, Yuelin and Ling, Wing-Kuen (2011) Research on chaos caused by a transitive map based on intelligent materials. Advanced Materials Research: Advances in Computer Science, Intelligent System and Environment, 105 . pp. 269-275. ISSN 1022-6680, 1662-8985

Heat transfer

Horikiri, Kana and Yao, Yufeng and Yao, Jun (2011) Numerical simulation of convective airflow in an empty room. International Journal of Energy and Environment, 5 (1). pp. 574-581. ISSN 1109-9577

Heating control

Rogers, Dan and Foster, Martin P. and Bingham, Chris (2011) Simulation of a scheduling control scheme for domestic central heating systems in the UK. In: Applied Simulation and Modelling (ASM 2011), June 22-24, 2011, Crete, Greece.

Heparan Sulphate

Fernig, D. G. and Stewart, Paul (2011) Heparan sulfate determines the modes of diffusion of fibroblast growth factor 2 within the pericellular matrix. In: ICMAT2011 International Conference on Materials for Advanced Technologies, 26 Jun - 1 Jul 2011, Suntec, Singapore.

Heuristics

Stewart, Paul (2011) Biologically inspired problem solving. In: University of Liverpool Institute of Integrative Biology Seminar Series, Feb 21 2011, University of Liverpool Institute of Integrative Biology.

Highway accidents

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Homogeneous charge compression ignition (HCCI)

Jin, Seong-Ho and Bai, Shuzhan and Zhao, Hua (2011) On the use of planar laser-induced phosphorescence (PLIP) for combustion temperature measurement in SI engines. In: UnICERG meeting, March 2011.

Hot rolling process

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Human drivers

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Hybrid electric vehicle (HEV)

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A novel genetic programming approach to the design of engine control systems for the voltage stabilisation of hybrid electric vehicle generator outputs. Proceedings of the Institute of Mechanical Engineers Part D - Journal of Automobile Engineering., 225 (10). pp. 1334-1346. ISSN 0954-4070

Hyper-Heuristics

Stewart, Paul (2011) Biologically inspired problem solving. In: University of Liverpool Institute of Integrative Biology Seminar Series, Feb 21 2011, University of Liverpool Institute of Integrative Biology.

Immune algorithms

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Industrial development

Locatelli, Giorgio and Mancini, Mauro (2011) The role of the reactor size for an investment in the nuclear sector: an evaluation of not-financial parameters. Progress in Nuclear Energy, 53 (2). pp. 212-222. ISSN 0149-1970

Industrial systems

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Input-output

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Integrated approach

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Integrated circuit modeling

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Integrated control

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Integrated systems

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Intelligent Control

Gladwin, D. and Stewart, P. and Stewart, J. (2011) Internal combustion engine control for series hybrid electric vehicles by parallel and distributed genetic programming/multiobjective genetic algorithms. International Journal of Systems Science - Computational Intelligence for Modelling and Control of Advanced Automotive Drivetrains, 42 (2). pp. 249-261. ISSN 0020-7721

Intelligent buildings

Rogers, Dan and Foster, Martin P. and Bingham, Chris (2011) Simulation of a scheduling control scheme for domestic central heating systems in the UK. In: Applied Simulation and Modelling (ASM 2011), June 22-24, 2011, Crete, Greece.

Joint analysis

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

K1C

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Large project

Ruuska, Inkeri and Ahola, Tuomas and Artto, Karlos and Locatelli, Giorgio and Mancini, Mauro (2011) A new governance approach for multi-firm projects: lessons from Olkiluoto 3 and Flamanville 3 nuclear power plant projects. International Journal of Project Management, 29 (6). pp. 647-660. ISSN 0263-7863

Laser

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Laser micro adjustment using ultra short pulses. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Short pulse thermal laser microforming technique. In: IWOTE'11 International Workshop on Thermal Forming and Welding Distortion, 6th-7th April 2011, Bremen, DE.

Laser Beam Brightness

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Laser Processing

Shukla, Pratik P. and Lawrence, Jonathan (2011) Mathematical modelling of the fibre laser surface processing of a zirconia engineering ceramic by means of three-dimensional finite element analysis. Proceedings of IMechE, Part C: Journal of Mechanical Engineering Science, 225 (4). pp. 949-964. ISSN 0954-4062

Laser Surface Engineering

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Laser Surface Treatment

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Laser induced phosphorescence (LIP)

Jin, Seong-Ho and Bai, Shuzhan and Zhao, Hua (2011) On the use of planar laser-induced phosphorescence (PLIP) for combustion temperature measurement in SI engines. In: UnICERG meeting, March 2011.

Laser surface treatment

Waugh, David (2011) Laser could light the way in joint surgery and save the NHS money. Lincolnshire Echo . ISSN 0962-5003

Lateral acceleration

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Lateral control

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Lateral deviation

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Left turns

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Linear systems

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Load positions

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Local distribution networks

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Logic functions

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

Long-term strategy

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Longitudinal acceleration

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

MEMS

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Short pulse thermal laser microforming technique. In: IWOTE'11 International Workshop on Thermal Forming and Welding Distortion, 6th-7th April 2011, Bremen, DE.

Magnetic Gears

Montague, R. and Bingham, Chris and Atallah, K. (2011) Servo control of magnetic gears. IEEE Transactions on Mechatronics, 99 (2). pp. 1-10. ISSN 1083-4435

Magnetic couplings

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Magnetic gear

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Manufacturing

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

Matlab code

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Matlab-Simulink

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Mean square error sense

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Measured speed

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Measurement process

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Mechanical properties

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Meta-Heuristics

Stewart, Paul (2011) Biologically inspired problem solving. In: University of Liverpool Institute of Integrative Biology Seminar Series, Feb 21 2011, University of Liverpool Institute of Integrative Biology.

Metal industries

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Michigan

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Microstructure

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Microstructure and mechanical properties

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Migration

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A controlled migration genetic algorithm operator for hardware-in-the-loop experimentation. Engineering Applications of Artificial Intelligence, 24 (4). pp. 586-594. ISSN 0952-1976

Modal analysis

Georgiades, Fotios and Latalski, Jaroslaw and Warminski, Jerzy (2011) Mode shapes variation of a composite beam with piezoelectric patches. Transaction of Aviation Institute / Prace- Instytut Lotnictwa , 218 . pp. 36-43. ISSN 0509-6669

Mode-switching

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Moment capacity

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Multi objective

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Multi-firm project

Ruuska, Inkeri and Ahola, Tuomas and Artto, Karlos and Locatelli, Giorgio and Mancini, Mauro (2011) A new governance approach for multi-firm projects: lessons from Olkiluoto 3 and Flamanville 3 nuclear power plant projects. International Journal of Project Management, 29 (6). pp. 647-660. ISSN 0263-7863

Multi-objective scheduling problems

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Multiobjective immune optimisation

Chen, Jun and Stewart, Paul (2011) Planning aircraft taxiing trajectories via a multi-objective immune optimisation. In: Natural Computation (ICNC), 2011 Seventh International Conference on, 26-28 July 2011, Shanghai, China.

Multiobjective optimization

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Multiple equilibrium

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Navigation

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Neural mass model

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam P. (2011) A thalamo-cortico-thalamic neural mass model to study alpha rhythms in Alzheimer's disease. Neural Networks, 24 (6). pp. 631-645. ISSN 0893-6080

Neural mass models

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Alpha and theta rhythm abnormality in Alzheimer's disease: a study using a computational model. In: From brains to systems. Advances in Experimental Medicine and Biology, 718 . Springer, New York, pp. 57-73. ISBN 9781461401643

Non-Linearity

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Non-linear

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Non-linear controllers

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Non-linearity errors

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Nonlinear inputs

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Nonlinear phase peak constrained FIR filter design

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Heidi Hai Huyen and Teo, Kok-Lay (2011) Minimax passband group delay nonlinear phase peak constrained FIR filter design without imposing desired phase response. International Journal of Innovative Computing, Information and Control . pp. 530-533. ISSN 1349-4198

Nonlinear systems

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Not-financial evaluation

Locatelli, Giorgio and Mancini, Mauro (2011) The role of the reactor size for an investment in the nuclear sector: an evaluation of not-financial parameters. Progress in Nuclear Energy, 53 (2). pp. 212-222. ISSN 0149-1970

Nuclear power plant project

Ruuska, Inkeri and Ahola, Tuomas and Artto, Karlos and Locatelli, Giorgio and Mancini, Mauro (2011) A new governance approach for multi-firm projects: lessons from Olkiluoto 3 and Flamanville 3 nuclear power plant projects. International Journal of Project Management, 29 (6). pp. 647-660. ISSN 0263-7863

OFDMA downlink

Benmesbah, Lamia and Ling, Wing-Kuen and Chandrasekhar, Vikram and Chu, Xiaoli and Dohler, Mischa (2011) Optimal decentralized spectral resource allocation for OFDMA downlink of femto networks via adaptive gradient vector step size approach. American Journal of Engineering and Applied Sciences, 4 (4). pp. 491-496. ISSN 1941-7020

Observability, Position control

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Olkiluoto 3

Ruuska, Inkeri and Ahola, Tuomas and Artto, Karlos and Locatelli, Giorgio and Mancini, Mauro (2011) A new governance approach for multi-firm projects: lessons from Olkiluoto 3 and Flamanville 3 nuclear power plant projects. International Journal of Project Management, 29 (6). pp. 647-660. ISSN 0263-7863

Operational test

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Optimal block matched motion estimation

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Blasi, Saverio Giovanni and Chi, Zhi-Wei and Siu, Wan-Chi (2011) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. American Journal of Engineering and Applied Sciences, 4 (4). pp. 448-460. ISSN 1941-7020

Optimal control theory

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Optimal controls

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Optimal decentralized spectral resource allocation

Benmesbah, Lamia and Ling, Wing-Kuen and Chandrasekhar, Vikram and Chu, Xiaoli and Dohler, Mischa (2011) Optimal decentralized spectral resource allocation for OFDMA downlink of femto networks via adaptive gradient vector step size approach. American Journal of Engineering and Applied Sciences, 4 (4). pp. 491-496. ISSN 1941-7020

Optimal performance

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Optimal response

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Optimal routes

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Optimal scheduling

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Optimal sequence

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Optimal strategies

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Optimization

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Optimum controllers

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Passenger vehicles

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Path control

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Permission

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

Phase Tranformation

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

Phase Transformation

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Physically based models

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Plug-In Hybrid Electric Vehicle

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Pneumatic Cylinders

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Pneumatic actuators

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Pneumatic drives, Pneumatic equipment

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Pneumatic system

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Portfolio analysis

Locatelli, Giorgio and Mancini, Mauro (2011) Large and small baseload power plants: drivers to define the optimal portfolios. Energy Policy, 39 (12). pp. 7762-7775. ISSN 0301-4215

Position errors

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Post-impact

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Power dissipation

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Power-train systems

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Practical systems

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Predictive control

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Principal component analysis

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Prior estimates

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Processing

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Product quality

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Project network

Ruuska, Inkeri and Ahola, Tuomas and Artto, Karlos and Locatelli, Giorgio and Mancini, Mauro (2011) A new governance approach for multi-firm projects: lessons from Olkiluoto 3 and Flamanville 3 nuclear power plant projects. International Journal of Project Management, 29 (6). pp. 647-660. ISSN 0263-7863

Proportional plus derivatives

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

QCA circuit design

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

QCAPro

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Quality

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Random processes

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Real-time estimation

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Remote monitoring and sensing

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Response surfaces

Gladwin, D. and Stewart, P. and Stewart, J. (2011) A controlled migration genetic algorithm operator for hardware-in-the-loop experimentation. Engineering Applications of Artificial Intelligence, 24 (4). pp. 586-594. ISSN 0952-1976

Risetimes

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Risk

Locatelli, Giorgio and Mancini, Mauro (2011) The role of the reactor size for an investment in the nuclear sector: an evaluation of not-financial parameters. Progress in Nuclear Energy, 53 (2). pp. 212-222. ISSN 0149-1970

Risk factors

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Road departures

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Robust control

Yang, Jun and Zolotas, Argyrios and Chen, Wen-Hua and Michail, Konstantinos and Li, Shihua (2011) Robust control of nonlinear MAGLEV suspension system with mismatched uncertainties via DOBC approach. ISA Transactions, 50 (3). 389 - 396. ISSN 0019-0578

Robustness

Yang, Jun and Zolotas, Argyrios and Chen, Wen-Hua and Michail, Konstantinos and Li, Shihua (2011) Robust control of nonlinear MAGLEV suspension system with mismatched uncertainties via DOBC approach. ISA Transactions, 50 (3). 389 - 396. ISSN 0019-0578

Rolled products

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Rolling mills

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Rolling process

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Rolling schedules

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Room

Horikiri, Kana and Yao, Yufeng and Yao, Jun (2011) Numerical simulation of convective airflow in an empty room. International Journal of Energy and Environment, 5 (1). pp. 574-581. ISSN 1109-9577

SBF

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

SMR

Locatelli, Giorgio and Mancini, Mauro (2011) The role of the reactor size for an investment in the nuclear sector: an evaluation of not-financial parameters. Progress in Nuclear Energy, 53 (2). pp. 212-222. ISSN 0149-1970

Sample sizes

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Second order interpolative sigma delta modulators

Ho, Yuk-Fan and Ling, Wing-Kuen and Reiss, Joshua and Yu, Xinghuo (2011) Global stability, limit cycles and chaotic behaviors of second order interpolative sigma delta modulators. International Journal of Bifurcation and Chaos, 21 (6). pp. 1755-1772. ISSN 0218-1274

Sensor validation

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Series-hybrid vehicle

Gladwin, D. and Stewart, P. and Stewart, J. (2011) Internal combustion engine control for series hybrid electric vehicles by parallel and distributed genetic programming/multiobjective genetic algorithms. International Journal of Systems Science - Computational Intelligence for Modelling and Control of Advanced Automotive Drivetrains, 42 (2). pp. 249-261. ISSN 0020-7721

Servo Control

Montague, R. and Bingham, Chris and Atallah, K. (2011) Servo control of magnetic gears. IEEE Transactions on Mechatronics, 99 (2). pp. 1-10. ISSN 1083-4435

Set-point tracking

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Set-valued discrete systems

Wang, Lidong and Gao, Yuelin and Ling, Wing-Kuen (2011) Research on chaos caused by a transitive map based on intelligent materials. Advanced Materials Research: Advances in Computer Science, Intelligent System and Environment, 105 . pp. 269-275. ISSN 1022-6680, 1662-8985

SiO2

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Silicon nitride

Shukla, Pratik and Lawrence, Jonathan (2011) Examination of temperature distribution and the thermal effects on Si3N4 engineering ceramics during fibre laser surface treatment. Optics and Lasers in Engineering, 49 (7). pp. 998-1011. ISSN 0143-8166

Shukla, Pratik and Lawrence, Jonathan (2011) Modification of fracture toughness parameter K1c following CO2 laser surface treatment of a Si3N4 engineering ceramic. Surface Engineering, 27 (10). pp. 734-741. ISSN 0267-0844

Simulated signals

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Simulation studies

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Simulation-based

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Single cylinder optical engine

Jin, Seong-Ho and Bai, Shuzhan and Zhao, Hua (2011) On the use of planar laser-induced phosphorescence (PLIP) for combustion temperature measurement in SI engines. In: UnICERG meeting, March 2011.

Siting

Locatelli, Giorgio and Mancini, Mauro (2011) The role of the reactor size for an investment in the nuclear sector: an evaluation of not-financial parameters. Progress in Nuclear Energy, 53 (2). pp. 212-222. ISSN 0149-1970

Small power plants

Locatelli, Giorgio and Mancini, Mauro (2011) Large and small baseload power plants: drivers to define the optimal portfolios. Energy Policy, 39 (12). pp. 7762-7775. ISSN 0301-4215

Speckle patterns

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Speed control, Acceleration

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

State Estimators

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2011) Integrated tilt with active lateral secondary suspension control for high speed railway vehicles. Mechatronics, 21 (6). pp. 1108-1122. ISSN 0957-4158

Statistical dependencies

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Statistical power

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

Steady State FEA

Shukla, Pratik P. and Lawrence, Jonathan (2011) Mathematical modelling of the fibre laser surface processing of a zirconia engineering ceramic by means of three-dimensional finite element analysis. Proceedings of IMechE, Part C: Journal of Mechanical Engineering Science, 225 (4). pp. 949-964. ISSN 0954-4062

Steel metallurgy, Hot rolling

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

Stochastic process

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Switching circuits

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

Symbiotic modelling approach, Algorithms

Gaffour, S-A and Mahfouf, M. and Panoutsos, G. and Chen, Jun (2011) An integrated system approach for solving multi-objective scheduling problems and advanced control of an experimental hot-rolling mill. In: 18th IFAC World Congress, 28 August - 2 September 2011, Milan, Italy.

System description

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Systems analysis, MATLAB

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Technical Ceramics

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Temporal distribution

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Time windows

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Topographical

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Topography

Dowding, Colin and Lawrence, Jonathan (2011) Analysis of KrF excimer laser beam modification resulting from ablation under closed thick film flowing filtered water. Optics and Laser Technology, 43 (6). pp. 1026-1035. ISSN 0030-3992

Shukla, Pratik P. and Lawrence, Jonathan (2011) Advances in laser surface treatment of engineering ceramics: viability and characterization techniques. Lambert Academic Publishing. ISBN 3845414367, 9783845414362

Torque disturbance

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Torque transfer, Controllers

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Tracking controls

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Transient temperature distribution

Jin, Seong-Ho and Bai, Shuzhan and Zhao, Hua (2011) On the use of planar laser-induced phosphorescence (PLIP) for combustion temperature measurement in SI engines. In: UnICERG meeting, March 2011.

Transportation research

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Tyre forces

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Ultrasound elastography

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

Uncertainty

Yang, Jun and Zolotas, Argyrios and Chen, Wen-Hua and Michail, Konstantinos and Li, Shihua (2011) Robust control of nonlinear MAGLEV suspension system with mismatched uncertainties via DOBC approach. ISA Transactions, 50 (3). 389 - 396. ISSN 0019-0578

Unified approach, Statistical methods, Highway accidents

Gordon, Tim J. and Kostyniuk, Lidia P. and Green, Paul E. and Barnes, Michele A. and Blower, Daniel and Blankespoor, Adam D. and Bogard, Scott E. (2011) Analysis of crash rates and surrogate events: unified approach. Transportation Research Record (2237). pp. 1-9. ISSN 0361-1981

University of Michigan, Electric vehicles

Lee, T.-K. and Baraket, Z. and Gordon, T. and Filipi, Z. (2011) Characterizing one-day missions of PHEVs based on representative synthetic driving cycles. SAE International Journal of Engines, 4 (1). pp. 1088-1101. ISSN 1946-3936

Vehicle acceleration

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Vehicle dynamics

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Vehicle forces

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Vehicle motion

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Vehicle speed, Automobile drivers

Nobukawa, K. and Gordon, T. J. and Barnes, M. A. and Goodsell, R. J. (2011) A comprehensive speed control model for human drivers with application to intersection left turns. In: American Control Conference, 29 June 2011 through 1 July 2011, San Francisco, CA.

Vehicles, Braking

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

Velocity profiles, Control

Wang, Jihon and Gordon, Tim (2011) Energy-efficient tracking control of pneumatic cylinders. In: Decision and Control and European Control Conference (CDC-ECC), 2011 50th IEEE Conference on, 12 - 15 December 2012, Orlando, FL.

Water Coverage

Yao, J. and Yao, Y. (2011) Experimental measurements and CFD predictions of blade water coverage in a diesel turbocharger. In: The 12th Int. Conf. Multiphase Flow in Industrial Plants, 21-23 September 201, Ischia (Napoli), Italy.

Willow

Fisher, E. M. and Darvell, L. I. and Saddawi, A. and Jones, J. M. and Dupont, C. and Commandre, J-M. and Nocquet, T. and Salvador, S. (2011) Combustion characteristics of chars from raw and torrefied willow. In: 7th U.S. National Combustion Meeting, 20-23 March 2011, Georgia Institute of Technology, Atlanta GA,.

Yaw velocity, Brakes

Yang, D. and Gordon, T. J. and Jacobson, B. and Jonasson, M. and Lidberg, M. (2011) Optimized brake-based control of path lateral deviation for mitigation of secondary collisions. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 225 (12). pp. 1587-1604. ISSN 0954-4070

ZrO2 engineering ceramics

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

Shukla, Pratik and Lawrence, Jonathan (2011) Distribution of temperature during fibre laser radiation and effects thereon phase transformation of ZrO2 engineering ceramic. Surface Engineering, 27 (10). pp. 742-748. ISSN 0267-0844

Shukla, Pratik P. and Lawrence, Jonathan (2011) Mathematical modelling of the fibre laser surface processing of a zirconia engineering ceramic by means of three-dimensional finite element analysis. Proceedings of IMechE, Part C: Journal of Mechanical Engineering Science, 225 (4). pp. 949-964. ISSN 0954-4062

active delta wings

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

adaptive gradient vector step size approach.

Benmesbah, Lamia and Ling, Wing-Kuen and Chandrasekhar, Vikram and Chu, Xiaoli and Dohler, Mischa (2011) Optimal decentralized spectral resource allocation for OFDMA downlink of femto networks via adaptive gradient vector step size approach. American Journal of Engineering and Applied Sciences, 4 (4). pp. 491-496. ISSN 1941-7020

adiabatic cooling effectiveness

Yao, Jun and Yao, Yufeng (2011) Computational study of hole shape effect on film cooling performance. Journal of Power and Energy, 225 (4). 505-519. ISSN 0957-6509

aerodynamic loads

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

airport energy minimisation

Chen, Jun and Stewart, Paul (2011) Planning aircraft taxiing trajectories via a multi-objective immune optimisation. In: Natural Computation (ICNC), 2011 Seventh International Conference on, 26-28 July 2011, Shanghai, China.

airwake

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

alpha rhythms

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Assessing retino-geniculo-cortical connectivities in Alzheimer’s disease with a neural mass model. In: IEEE Symposium Series on Computational Intelligence: Cognitive Algorithms, Mind and Brain, April 2011, Paris.

analytical optimization

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

arbitrary pixel precisions

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Blasi, Saverio Giovanni and Chi, Zhi-Wei and Siu, Wan-Chi (2011) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. American Journal of Engineering and Applied Sciences, 4 (4). pp. 448-460. ISSN 1941-7020

audio hearing aids

Ling, Wing-Kuen and Al Hosni, K. Z. K. and Dam, Hai Huyen (2011) Designs of low delay cosine modulated filter banks and subband amplifiers. In: 19th European Signal Processing Conference EUSIPCO 2011, August 29 - September 2 2011, Barcelona, Spain.

avian influenza

Ling, Wing-Kuen (2011) System biology and signal processing for biomedical applications. [Teaching Resource] (Unpublished)

bias

Riley, Mike J. W. (2011) Evaluating cascade correlation neural networks for surrogate modelling needs and enhancing the Nimrod/O toolkit for multi-objective optimisation. PhD thesis, Cranfield University.

bioactivity

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

biocompatibility

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

biological implants

Waugh, David (2011) Laser could light the way in joint surgery and save the NHS money. Lincolnshire Echo . ISSN 0962-5003

biologically inspired problem solving

Stewart, Paul and Chen, Jun and Fernig, David (2011) Looking for clues: solving complex problems with biologically inspired heuristics. In: Symposium AA: Frontiers in Optical Bio-imaging and Microscopy.The 6th Biennial International Conference on Materials for Advanced Technologies (ICMAT 2011), 29 June - 1 July 2011, Suntec, Singapore.

bmjdoi

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

bmjfind

Dowding, Colin and Lawrence, Jonathan and Stewart, Paul (2011) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. In: ICMAT2011 International Conference on Materials for Advanced Technologies, 26 Jun - 1 Jul 2011, Suntec, Singapore.

bmjtype

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Heidi Hai Huyen and Teo, Kok-Lay (2011) Minimax passband group delay nonlinear phase peak constrained FIR filter design without imposing desired phase response. International Journal of Innovative Computing, Information and Control . pp. 530-533. ISSN 1349-4198

brain oscillations

sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Synaptic deficiency in Alzheimer disease and its implications on thalamic and cortical oscillations: a study using a neural mass model. In: 11th UKCI workshop, 7th-9th September 2011, Manchester.

cellular automata

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

chaos control

Ling, Wing-Kuen (2011) Book review on “controlling chaos: suppression, synchronization and chaotification". IEEE Computational Intelligence Magazine, 6 (1). pp. 68-69. ISSN 1556-603x

Ling, Wing-Kuen (2011) System biology and signal processing for biomedical applications. [Teaching Resource] (Unpublished)

chaotic behavior

Ho, Yuk-Fan and Ling, Wing-Kuen and Reiss, Joshua and Yu, Xinghuo (2011) Global stability, limit cycles and chaotic behaviors of second order interpolative sigma delta modulators. International Journal of Bifurcation and Chaos, 21 (6). pp. 1755-1772. ISSN 0218-1274

chaotification

Ling, Wing-Kuen (2011) Book review on “controlling chaos: suppression, synchronization and chaotification". IEEE Computational Intelligence Magazine, 6 (1). pp. 68-69. ISSN 1556-603x

char

Fisher, E. M. and Darvell, L. I. and Saddawi, A. and Jones, J. M. and Dupont, C. and Commandre, J-M. and Nocquet, T. and Salvador, S. (2011) Combustion characteristics of chars from raw and torrefied willow. In: 7th U.S. National Combustion Meeting, 20-23 March 2011, Georgia Institute of Technology, Atlanta GA,.

chemical

Shukla, P. P. and Lawrence, J. (2011) Characterization and compositional study of a zirconia engineering ceramic irradiated with a fibre laser beam. Optics and Laser Technology, 43 (7). pp. 1292-1300. ISSN 0030-3992

combustion

Fisher, E. M. and Darvell, L. I. and Saddawi, A. and Jones, J. M. and Dupont, C. and Commandre, J-M. and Nocquet, T. and Salvador, S. (2011) Combustion characteristics of chars from raw and torrefied willow. In: 7th U.S. National Combustion Meeting, 20-23 March 2011, Georgia Institute of Technology, Atlanta GA,.

complex network

Ling, Wing-Kuen (2011) System biology and signal processing for biomedical applications. [Teaching Resource] (Unpublished)

complex networks

Ling, Wing-Kuen and Stewart, Paul and Teo, Kok-Lay and Tse, Chi-Kong (2011) Study of near consensus complex social networks using Eigen theory. In: International Symposium on Circuits and Systems, 15 May - 18 May 2011, Rio de Janeiro.

consensus

Ling, Wing-Kuen and Stewart, Paul and Teo, Kok-Lay and Tse, Chi-Kong (2011) Study of near consensus complex social networks using Eigen theory. In: International Symposium on Circuits and Systems, 15 May - 18 May 2011, Rio de Janeiro.

contact angle

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

control

Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2011) Integrated tilt with active lateral secondary suspension control for high speed railway vehicles. Mechatronics, 21 (6). pp. 1108-1122. ISSN 0957-4158

control system synthesis

Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.

convection

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

cooling hole geometry

Yao, Jun and Yao, Yufeng (2011) Computational study of hole shape effect on film cooling performance. Journal of Power and Energy, 225 (4). 505-519. ISSN 0957-6509

cosine modulated filter banks

Ling, Wing-Kuen and Al Hosni, K. Z. K. and Dam, Hai Huyen (2011) Designs of low delay cosine modulated filter banks and subband amplifiers. In: 19th European Signal Processing Conference EUSIPCO 2011, August 29 - September 2 2011, Barcelona, Spain.

cough analysis

Ling, Wing-Kuen (2011) System biology and signal processing for biomedical applications. [Teaching Resource] (Unpublished)

defect tolerance

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

delay

Locatelli, Giorgio and Mancini, Mauro (2011) Looking back to see the future: building nuclear power plants in Europe. Construction Management and Economics, 30 (8). pp. 623-637. ISSN 0144-6193

distributional chaos in a sequence

Wang, Lidong and Gao, Yuelin and Ling, Wing-Kuen (2011) Research on chaos caused by a transitive map based on intelligent materials. Advanced Materials Research: Advances in Computer Science, Intelligent System and Environment, 105 . pp. 269-275. ISSN 1022-6680, 1662-8985

early stopping

Riley, Mike J. W. (2011) Evaluating cascade correlation neural networks for surrogate modelling needs and enhancing the Nimrod/O toolkit for multi-objective optimisation. PhD thesis, Cranfield University.

elastogram

Ling, Wing-Kuen (2011) System biology and signal processing for biomedical applications. [Teaching Resource] (Unpublished)

elastograms

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

electroencephalogram

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Assessing retino-geniculo-cortical connectivities in Alzheimer’s disease with a neural mass model. In: IEEE Symposium Series on Computational Intelligence: Cognitive Algorithms, Mind and Brain, April 2011, Paris.

ensembling

Riley, Mike J. W. (2011) Evaluating cascade correlation neural networks for surrogate modelling needs and enhancing the Nimrod/O toolkit for multi-objective optimisation. PhD thesis, Cranfield University.

error analysis

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

error power estimation

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

excitation of NNMs

Georgiades, Fotios and Warminski, Jerzy (2011) Excitation of a localized nonlinear normal mode of a bladed disk assembly lump mass nonlinear model. Transactions of Aviation Institute / Prace- Instytut Lotnictwa, 218 (12). pp. 28-35. ISSN 0509-6669

fault tolerance

Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.

fin stack

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

finite element modelling

Griffiths, Jonathan David and Edwardson, Stuart and Boegelein, Thomas and Dearden, Geoff and Watkins, Ken (2011) The effect of graphite burn off on multi pass laser forming. In: International Workshop on Thermal Forming and Welding Distortion, 6th-7th April 2011, Bremen, DE.

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Modelling of real temporally variant beam shapes in laser materials processing. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

fractal behavior

Ho, Yuk-Fan and Ling, Wing-Kuen and Reiss, Joshua and Yu, Xinghuo (2011) Global stability, limit cycles and chaotic behaviors of second order interpolative sigma delta modulators. International Journal of Bifurcation and Chaos, 21 (6). pp. 1755-1772. ISSN 0218-1274

functional inequality constrained optimization problem

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Heidi Hai Huyen and Teo, Kok-Lay (2011) Minimax passband group delay nonlinear phase peak constrained FIR filter design without imposing desired phase response. International Journal of Innovative Computing, Information and Control . pp. 530-533. ISSN 1349-4198

gas turbines

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

global stability.

Ho, Yuk-Fan and Ling, Wing-Kuen and Reiss, Joshua and Yu, Xinghuo (2011) Global stability, limit cycles and chaotic behaviors of second order interpolative sigma delta modulators. International Journal of Bifurcation and Chaos, 21 (6). pp. 1755-1772. ISSN 0218-1274

group delay

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Hai Huyen and Yeo, Kok-Lay (2011) Minimax passband group delay nonlinear FIR filter design without imposing desired phase response. In: 19th European Signal Processing Conference, August 29 - September 2 2011, Palau de Congressos de Catalunya.

heat pipes

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

heat transfer enhancement

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

helicopter loads

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

heuristics

Stewart, Paul and Chen, Jun and Fernig, David (2011) Looking for clues: solving complex problems with biologically inspired heuristics. In: Symposium AA: Frontiers in Optical Bio-imaging and Microscopy.The 6th Biennial International Conference on Materials for Advanced Technologies (ICMAT 2011), 29 June - 1 July 2011, Suntec, Singapore.

hybrid nano/CMOS

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

hybrid nano/CMOS computing architecture

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

hyper-heuristics

Stewart, Paul and Chen, Jun and Fernig, David (2011) Looking for clues: solving complex problems with biologically inspired heuristics. In: Symposium AA: Frontiers in Optical Bio-imaging and Microscopy.The 6th Biennial International Conference on Materials for Advanced Technologies (ICMAT 2011), 29 June - 1 July 2011, Suntec, Singapore.

identification technology

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

large engineering projects

Locatelli, Giorgio and Mancini, Mauro (2011) Looking back to see the future: building nuclear power plants in Europe. Construction Management and Economics, 30 (8). pp. 623-637. ISSN 0144-6193

laser materials processing

Griffiths, Jonathan David and Edwardson, Stuart and Boegelein, Thomas and Dearden, Geoff and Watkins, Ken (2011) The effect of graphite burn off on multi pass laser forming. In: International Workshop on Thermal Forming and Welding Distortion, 6th-7th April 2011, Bremen, DE.

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2011) Modelling of real temporally variant beam shapes in laser materials processing. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

laser processing

Dowding, Colin and Lawrence, Jonathan and Stewart, Paul (2011) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. In: ICMAT2011 International Conference on Materials for Advanced Technologies, 26 Jun - 1 Jul 2011, Suntec, Singapore.

laser surface treatment

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

limit cycle behavior

Ho, Yuk-Fan and Ling, Wing-Kuen and Reiss, Joshua and Yu, Xinghuo (2011) Global stability, limit cycles and chaotic behaviors of second order interpolative sigma delta modulators. International Journal of Bifurcation and Chaos, 21 (6). pp. 1755-1772. ISSN 0218-1274

lookup-table

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

low delay

Ling, Wing-Kuen and Al Hosni, K. Z. K. and Dam, Hai Huyen (2011) Designs of low delay cosine modulated filter banks and subband amplifiers. In: 19th European Signal Processing Conference EUSIPCO 2011, August 29 - September 2 2011, Barcelona, Spain.

macro/femto networks

Benmesbah, Lamia and Ling, Wing-Kuen and Chandrasekhar, Vikram and Chu, Xiaoli and Dohler, Mischa (2011) Optimal decentralized spectral resource allocation for OFDMA downlink of femto networks via adaptive gradient vector step size approach. American Journal of Engineering and Applied Sciences, 4 (4). pp. 491-496. ISSN 1941-7020

meta-heuristics

Stewart, Paul and Chen, Jun and Fernig, David (2011) Looking for clues: solving complex problems with biologically inspired heuristics. In: Symposium AA: Frontiers in Optical Bio-imaging and Microscopy.The 6th Biennial International Conference on Materials for Advanced Technologies (ICMAT 2011), 29 June - 1 July 2011, Suntec, Singapore.

minimax

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Hai Huyen and Yeo, Kok-Lay (2011) Minimax passband group delay nonlinear FIR filter design without imposing desired phase response. In: 19th European Signal Processing Conference, August 29 - September 2 2011, Palau de Congressos de Catalunya.

minimax passband group delay

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Heidi Hai Huyen and Teo, Kok-Lay (2011) Minimax passband group delay nonlinear phase peak constrained FIR filter design without imposing desired phase response. International Journal of Innovative Computing, Information and Control . pp. 530-533. ISSN 1349-4198

modified filled function method.

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Heidi Hai Huyen and Teo, Kok-Lay (2011) Minimax passband group delay nonlinear phase peak constrained FIR filter design without imposing desired phase response. International Journal of Innovative Computing, Information and Control . pp. 530-533. ISSN 1349-4198

multimodal functions

Riley, Mike J. W. (2011) Evaluating cascade correlation neural networks for surrogate modelling needs and enhancing the Nimrod/O toolkit for multi-objective optimisation. PhD thesis, Cranfield University.

nanoelectronics

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

neural mass model

sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Synaptic deficiency in Alzheimer disease and its implications on thalamic and cortical oscillations: a study using a neural mass model. In: 11th UKCI workshop, 7th-9th September 2011, Manchester.

non-adiabatic switching power loss

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

non-linear block matched motion model

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Blasi, Saverio Giovanni and Chi, Zhi-Wei and Siu, Wan-Chi (2011) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. American Journal of Engineering and Applied Sciences, 4 (4). pp. 448-460. ISSN 1941-7020

nonlinear control systems

Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.

nonlinear optimization

Benmesbah, Lamia and Ling, Wing-Kuen and Chandrasekhar, Vikram and Chu, Xiaoli and Dohler, Mischa (2011) Optimal decentralized spectral resource allocation for OFDMA downlink of femto networks via adaptive gradient vector step size approach. American Journal of Engineering and Applied Sciences, 4 (4). pp. 491-496. ISSN 1941-7020

nonlinear phase FIR filter design

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Hai Huyen and Yeo, Kok-Lay (2011) Minimax passband group delay nonlinear FIR filter design without imposing desired phase response. In: 19th European Signal Processing Conference, August 29 - September 2 2011, Palau de Congressos de Catalunya.

nonuniform filter bank

Ling, Wing-Kuen (2011) Jean Baptiste Joseph Fourier meets Stephen Hawking. [Teaching Resource] (Unpublished)

nonuniform filter banks

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

nuclear power plants

Locatelli, Giorgio and Mancini, Mauro (2011) Looking back to see the future: building nuclear power plants in Europe. Construction Management and Economics, 30 (8). pp. 623-637. ISSN 0144-6193

nylon 66

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

optimal control

Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.

optimisation

Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.

optimism bias

Locatelli, Giorgio and Mancini, Mauro (2011) Looking back to see the future: building nuclear power plants in Europe. Construction Management and Economics, 30 (8). pp. 623-637. ISSN 0144-6193

optimization

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

osteoblast cells

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

perfect reconstruction

Ling, Wing-Kuen (2011) Jean Baptiste Joseph Fourier meets Stephen Hawking. [Teaching Resource] (Unpublished)

pericellular matrix

Fernig, D. G. and Stewart, Paul (2011) Heparan sulfate determines the modes of diffusion of fibroblast growth factor 2 within the pericellular matrix. In: ICMAT2011 International Conference on Materials for Advanced Technologies, 26 Jun - 1 Jul 2011, Suntec, Singapore.

periodic points

Wang, Lidong and Gao, Yuelin and Ling, Wing-Kuen (2011) Research on chaos caused by a transitive map based on intelligent materials. Advanced Materials Research: Advances in Computer Science, Intelligent System and Environment, 105 . pp. 269-275. ISSN 1022-6680, 1662-8985

pilot workload

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

polarization error estimation

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

predictive maintenance

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

probabilistic automata

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

probabilistic modeling tool

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

quadratic NP hard optimization problem

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Dam, Heidi Hai Huyen and Teo, Kok-Lay (2011) Minimax passband group delay nonlinear phase peak constrained FIR filter design without imposing desired phase response. International Journal of Innovative Computing, Information and Control . pp. 530-533. ISSN 1349-4198

quantum computing

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

quantum dot cellular automata

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

quantum dots

Srivastava, S. and Asthana, A. and Bhanja, S. and Sarkar, S. (2011) QCAPro: an error-power estimation tool for QCA circuit design. In: Circuits and Systems (ISCAS), 2011 IEEE International Symposium on, 15-18 May 2011, Rio de Janeiro.

railway vehicle

Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2011) Integrated tilt with active lateral secondary suspension control for high speed railway vehicles. Mechatronics, 21 (6). pp. 1108-1122. ISSN 0957-4158

real-time wavelet kernel design

Ling, Wing-Kuen (2011) Jean Baptiste Joseph Fourier meets Stephen Hawking. [Teaching Resource] (Unpublished)

regenerative medicine

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

reliability

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

repair techniques

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

robust control

Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.

sensors

Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.

shape optimisation

Riley, Mike J. W. (2011) Evaluating cascade correlation neural networks for surrogate modelling needs and enhancing the Nimrod/O toolkit for multi-objective optimisation. PhD thesis, Cranfield University.

simulated body fluid (SBF)

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

single step analytical solution.

Ho, Charlotte Yuk-Fan and Ling, Wing-Kuen and Blasi, Saverio Giovanni and Chi, Zhi-Wei and Siu, Wan-Chi (2011) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. American Journal of Engineering and Applied Sciences, 4 (4). pp. 448-460. ISSN 1941-7020

state space

Yang, Jun and Zolotas, Argyrios and Chen, Wen-Hua and Michail, Konstantinos and Li, Shihua (2011) Robust control of nonlinear MAGLEV suspension system with mismatched uncertainties via DOBC approach. ISA Transactions, 50 (3). 389 - 396. ISSN 0019-0578

subdivision technique

Riley, Mike J. W. (2011) Evaluating cascade correlation neural networks for surrogate modelling needs and enhancing the Nimrod/O toolkit for multi-objective optimisation. PhD thesis, Cranfield University.

surface free energy

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

surface modification

Dowding, Colin and Lawrence, Jonathan and Stewart, Paul (2011) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. In: ICMAT2011 International Conference on Materials for Advanced Technologies, 26 Jun - 1 Jul 2011, Suntec, Singapore.

suspensions (mechanical components)

Michail, Konstantinos and Zolotas, Argyrios and Goodall, Roger M and Halikias, George (2011) Optimal selection for sensor fault tolerant control of an EMS system via loop-shaping robust control. In: 19th Mediterranean Conference on Control & Automation (MED), 20-23 June 2011, Corfu.

synaptic connectivity

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam P. (2011) A thalamo-cortico-thalamic neural mass model to study alpha rhythms in Alzheimer's disease. Neural Networks, 24 (6). pp. 631-645. ISSN 0893-6080

synchronization

Ling, Wing-Kuen (2011) Book review on “controlling chaos: suppression, synchronization and chaotification". IEEE Computational Intelligence Magazine, 6 (1). pp. 68-69. ISSN 1556-603x

system biology

Ling, Wing-Kuen (2011) System biology and signal processing for biomedical applications. [Teaching Resource] (Unpublished)

table lookup

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

tagged repair

Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2011) Tagged repair techniques for defect tolerance in hybrid nano/CMOS architecture. Nanotechnology, IEEE Transactions on, 10 (3). pp. 424-432. ISSN 1536-125X

thalamo-cortico-thalamic circuitry

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam P. (2011) A thalamo-cortico-thalamic neural mass model to study alpha rhythms in Alzheimer's disease. Neural Networks, 24 (6). pp. 631-645. ISSN 0893-6080

theta rhythms

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Alpha and theta rhythm abnormality in Alzheimer's disease: a study using a computational model. In: From brains to systems. Advances in Experimental Medicine and Biology, 718 . Springer, New York, pp. 57-73. ISBN 9781461401643

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2011) Assessing retino-geniculo-cortical connectivities in Alzheimer’s disease with a neural mass model. In: IEEE Symposium Series on Computational Intelligence: Cognitive Algorithms, Mind and Brain, April 2011, Paris.

tilt control

Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2011) Integrated tilt with active lateral secondary suspension control for high speed railway vehicles. Mechatronics, 21 (6). pp. 1108-1122. ISSN 0957-4158

torrefaction

Fisher, E. M. and Darvell, L. I. and Saddawi, A. and Jones, J. M. and Dupont, C. and Commandre, J-M. and Nocquet, T. and Salvador, S. (2011) Combustion characteristics of chars from raw and torrefied willow. In: 7th U.S. National Combustion Meeting, 20-23 March 2011, Georgia Institute of Technology, Atlanta GA,.

trend extraction

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

two stage filtering

Subramaniam, Suba R. and Hon, Tsz K. and Ling, Wing-Kuen and Georgakis, Apostolos (2011) Optimal two-stage filtering of elastograms. In: The 33rd Annual International Conference of the IEEE Engineering in Medicine and Biology Society, August 30th - September 3rd 2011, Boston Marriott Copley Place, Boston, Mass..

variance

Riley, Mike J. W. (2011) Evaluating cascade correlation neural networks for surrogate modelling needs and enhancing the Nimrod/O toolkit for multi-objective optimisation. PhD thesis, Cranfield University.

vortex generators

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

water tunnel tests

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

wettability

Waugh, David and Lawrence, Jonathan (2011) CO2 laser surface patterning of nylon 6,6 and the subsequent effects on wettability characteristics and apatite response. MAT10 Special Issue: Surface Engineering, 27 (10). pp. 724-728. ISSN 0267-0844

Waugh, David and Lawrence, Jonathan (2011) Generic parameters governing the wettability characteristics of laser-modified nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Modulation of osteoblast cell response through laser surface processing of nylon 6,6. In: ICALEO 2011, 23rd - 27th October 2011, Orlando, FL, USA.

Waugh, David and Lawrence, Jonathan (2011) Wettability and osteoblast cell response modulation through UV laser processing of nylon 6,6. Applied Surface Science, 257 (21). pp. 8798-8812. ISSN 0169-4332

wettability characteristics

Waugh, David and Lawrence, Jonathan (2011) The enhancement of biomimetic apatite coatings by means of KrF excimer laser surface treatment of nylon 6,6. Lasers in Engineering, 21 (1&2). pp. 95-114. ISSN 0898-1507

This list was generated on Sat Oct 25 01:37:28 2014 BST.