Items where Division is "College of Science > School of Engineering" and Year is 2010

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type | No Grouping
3D closed loop Ablation Ablation Threshold Actuators Alzheimer's Disease Artificial Immune Systems BCH codes Battery Modeling Bending Bias & Variance Bisphenol A Polycarbonate Bose Chaudhuri Hocquenghem codes CFD CFD. Abiatic cooling CMOS logic circuits CO2 Laser CO2 laser Cascade Correlation Classical control Co-occurrence matrix Combustion Compensation scheme Control systems Control theory Cost Estimation DC link voltage stabilisation DC-link voltages Dead- time compensation Dead-time compensation Debris Control Decentralized spectral resource allocation for OFDMA Decommissioning Diagnostics Diode-clamped Dynamic Stiffness Early Stopping Economies of scale Effectiveness Empirical mode decomposition (EMD) Energy Management Energy Storage Energy storage Engineering Ceramics Ensembling Etch Rate Evolutionary Algorithm Excimer laser Experimental Measurement Experimental decision support Expo 2015 F2 laser FEM FIR filter bank design via stretching and shifting frequency Fault tolerance Femtocell Fibre Laser Fibre laser Fibre lasers Flight simulation Flow Velocity Forming Fracture Toughness (K1c) Engineering ceramic Fracture toughness Fuzzy Logic Ganglion cell Genetic algorithms Georgiadis Gradient descent HIV Therapy Hamming codes Hardware in the loop Harmonic analysis Harmonic quality High-frequency switching Hole shape Hole shpae Hybrid Electric Vehicles IC Engines IRIS Inflection point Intelligent Control Intelligent buildings Intrinsic mode function (IMF) Kinetics KrF excimer laser LCOE LUEC Laser forming Lasers Liquid Chemistry Liquid Immersion Low frequency Lyapunov stability. MEMS control MEMS devices Micro-actuators Modularity MonteCarlo evaluation Multi-objective Optimisation Multilevel converter Multiobjective genetic programming Navier-Stokes equations Neural Networks Non-Linearity Nonlinear control OFDMA Oblique extremum point Oblique-extrema IMF (OIMF) Oblique-extrema empirical mode decomposition (OEMD) Optimal cosine modulated nonuniform linear Optimism bias Osteoblast cells PMMA Parameter Estimation Parkinson’s disease Perceptron training algorithm Permanent Magnet Synchronous Motor Permanent magnet synchronous motor Permanent magnets Permanent-magnet machine Phase currents Phase inductance Plume Distortion Popov stability Power storage Project Management Pulsed lasers Residual stress Resonant power conversion Response Surface Risk Management SBF. SMR Series-hybrid vehicle Shape Optimisation Si3N4 engineering ceramic Simscape Simulated annealing Simulink Sliding mode control Small medium plant Small-to-medium size reactors Space vector modulation Spray Subdivision method Surface Treatment Surface modification TGM Technical Ceramics Temperature gradient mechanism Thermal Analysis Thermogravimetry Topography Transmission control protocol Two-channel linear phase FIR QMF bank minimax design Uncertain systems Variable neighbourhood search Vector spaces, Synchronous motors Vickers indentation techniques Visitor numbers. Voltage drop, Electric motors Water particle Wettability ZrO2 engineering ceramics adiabatic cooling effectiveness airwake alkali metals alpha rhythm alpha rhythms; thalamocortical circuitry; Alzheimer's disease arbitrary pixel precisions areal spectral efficiency bad line exclusion technique bandpass filter bending bifurcation behaviour bioactivity biologically inspired systems biomass blade cooling effectiveness block diagram bluff body bmjanomaly bmjcheck bmjdoi bmjdoid bmjtype bond graph brain stimulation built environment energy control chaos chemical composition circuit reliability co-firing coexisting macro/Femto networks using filled function method combustion combustion,olive residue,pke,pyrolysis,shea residue complex network computational fluid dynamics; CFD; high temperature; turbine blades; service lifetime; cooling hole geometries; simulation; modelling; penetration depth; coolant jet flow; entrainment; hot fluids; vortex structures. computational fuid dynamics consensus contact angle. control engineering cooling cytotoxicity debris control detached eddy simulation digital signal processing systems don't care conditions dual-fuel dynamics of the HIV system dysrhythmia empirical mode decomposition engine modeling ensemble machine learning error correcting codes error correction codes event-related (de )synchronisation; focal-ERD/surround-ERS; Alzheimer's Disease; thalamocortical circuitry; lumped computational model facial pose detection facial pose estimation fault diagnosis fault rate tolerance techniques fault tolerance fault tolerant issues feature face filled function finite volume methods flowing liquid immersion frequency response of the prototype filter frigate fuzzy control fuzzy modeling global optimization. hole shape hole shape effect hybrid CMOS-nanoarchitecture hybrid systems idealised physical modelling image processing initiate HIV therapy input selection integrated circuit reliability internet congestion problem interpretability intrinsic mode function invariant set kinetics laser laser applications laser forming lateral inhibition logic functions look-up tables macrocell magnetic gearbox material removal mathematical modelling mechatronics mega-projects micromachining motion control motion estimation with motion vectors multi-objective optimisation multilevel energy converters mutual information neural field model neuro fuzzy modelling neurocontrollers neurodynamics neuroprosthetic devices nonconvex optimization problem normalized co-occurrence mutual information nuclear reactor nylon 66 optimal resource allocation optimisation optimization osteoblast cells outage probability output selection parameter estimation perceptually important information permanent magnet synchronous motors processing gases prototype filter pyrolysis random early detection algorithm rank-order codes redundancy resource block retinal model sensor selection sensors servo mechanism signal processing simulation tools single step optimal block space-vector (SV) modulation (SVM) surface finish surface treatment symbolic dynamics table lookup technology temperature gradient mechanism turbulent flow two tank system two-phase flow uncertainty video signal processing wettability willow
Number of items: 357.

3D closed loop

Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Towards controlled 3D laser forming. In: MATADOR 2010, 14 – 16th July 2010, Manchester.

Ablation

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Ablation Threshold

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Actuators

Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios (2010) Modelling and control of a high redundancy actuator. Mechatronics, 20 (1). 102 - 112. ISSN 0957-4158

Alzheimer's Disease

sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2010) A computational modelling approach to investigate alpha rhythm slowing associated with Alzheimer’s disease. In: BICS 2010, 14-16 July 2010, Madrid, Spain.

Artificial Immune Systems

Chen, Jun and Mahfouf, Mahdi (2010) Interpretable fuzzy modeling using multi-objective immune-inspired optimization algorithms. In: 2010 IEEE World Congress on Computational Intelligence, July 18-23 2010, Barcelona.

BCH codes

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

Battery Modeling

Gould, C. and Bingham, Chris and Stone, D. and Foster, M. (2010) State-of-Function determination for EV/HEV battery packs. In: The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov 5-9 2010, Shenzhen, China.

Bending

Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Temperature gradient mechanism: overview of the multiple pass controlling factors. Physics Procedia, 5 (A). pp. 53-63. ISSN 1875-3892

Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Towards controlled 3D laser forming. In: MATADOR 2010, 14 – 16th July 2010, Manchester.

Bias & Variance

Riley, Mike J. W. and Jenkins, Karl W. and Thompson, Chris P. (2010) A study of early stopping, ensembling, and patchworking for cascade correlation neural networks. International Journal of Applied Mathematics, 40 (4). pp. 307-316. ISSN 1992-9978

Bisphenol A Polycarbonate

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Bose Chaudhuri Hocquenghem codes

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

CFD

Yao, Jun and Sian, Sohan and Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

CFD. Abiatic cooling

Sian, S and Yao, J and Yao, Y (2010) Effect of hole shape on adiabatic cooling effectiveness. In: WCE 2009, July 2-4, 2009, Imperial College, London, UK.

CMOS logic circuits

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

CO2 Laser

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

CO2 laser

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

Waugh, David and Lawrence, Jonathan and Walton, Chris and Zakaria, R. (2010) On the effects of using CO2 and F2 lasers to modify the wettability of a polymeric biomaterial. Optics and Laser Technology, 42 (2). pp. 347-356. ISSN 0030-3992

Cascade Correlation

Riley, Mike J. W. and Jenkins, Karl W. and Thompson, Chris P. (2010) A study of early stopping, ensembling, and patchworking for cascade correlation neural networks. International Journal of Applied Mathematics, 40 (4). pp. 307-316. ISSN 1992-9978

Classical control

Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios (2010) Modelling and control of a high redundancy actuator. Mechatronics, 20 (1). 102 - 112. ISSN 0957-4158

Co-occurrence matrix

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Normalized co-occurrence mutual information for facial pose detection inside videos. IEEE Transactions on Circuits and Systems for Video Technology, 20 (12). 1898 -1902. ISSN 1051-8215

Combustion

Meyer, Terrence and Brear, Michael and Jin, Seong-Ho and Gord, James (2010) Formation and diagnostics of sprays in combustion. In: Handbook of combustion. Wiley. ISBN 9783527324491

Compensation scheme

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Control systems

Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.

Control theory

Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.

Cost Estimation

Locatelli, Giorgio and Mancini, Mauro (2010) Competitiveness of small-medium, new generation reactors: a comparative study on decommissioning. Journal of Engineering for Gas Turbines and Power, 132 (10). p. 102906. ISSN 0742-4795

DC link voltage stabilisation

Stewart, Paul (2010) Advanced engine control methodologies for the series-hybrid vehicle. In: 2010 AECS Advanced Engine Control Seminar, 3-5 November 2010, Tianjin University, P.R. China.

DC-link voltages

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Dead- time compensation

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Dead-time compensation

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on , 57 (8). pp. 2651-2658. ISSN 0278-0046

Debris Control

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Decentralized spectral resource allocation for OFDMA

Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Chandrasekhar, Vakam and Chu, Xiaoli and Dohler, Mischa (2010) Decentralized spectral resource allocation for OFDMA downlink of coexisting macro/femto networks using filled function method. In: 7th IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

Decommissioning

Locatelli, Giorgio and Mancini, Mauro (2010) Competitiveness of small-medium, new generation reactors: a comparative study on decommissioning. Journal of Engineering for Gas Turbines and Power, 132 (10). p. 102906. ISSN 0742-4795

Diagnostics

Meyer, Terrence and Brear, Michael and Jin, Seong-Ho and Gord, James (2010) Formation and diagnostics of sprays in combustion. In: Handbook of combustion. Wiley. ISBN 9783527324491

Diode-clamped

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Dynamic Stiffness

Georgiades, Fotios and Scholtz, Peter (2010) Sensitivity of experimental dynamic stiffness of the vibrator-earth system. In: Near Surface 2010 – 16th European Meeting of Environmental and Engineering Geophysics, 6 - 8 September 2010, Zurich.

Early Stopping

Riley, Mike and Jenkins, Karl W. and Thompson, Chris P. (2010) Improving the performance of cascade correlation neural networks on multimodal functions. In: World Congress on Engineering 2010 , 30 June - 2 July 2010, London, UK.

Riley, Mike J. W. and Jenkins, Karl W. and Thompson, Chris P. (2010) A study of early stopping, ensembling, and patchworking for cascade correlation neural networks. International Journal of Applied Mathematics, 40 (4). pp. 307-316. ISSN 1992-9978

Economies of scale

Carelli, Mario and Garrone, Paola and Locatelli, Giorgio and Mancini, Mauro and Mycoff, Clark and Trucco, Paolo and Ricotti, Marco (2010) Economic features of integral, modular, small-to-medium size reactors. Progress in Nuclear Energy, 52 (4). pp. 403-414. ISSN 0149-1970

Effectiveness

Sian, S and Yao, J and Yao, Y (2010) Effect of hole shape on adiabatic cooling effectiveness. In: WCE 2009, July 2-4, 2009, Imperial College, London, UK.

Yao, Jun and Sian, Sohan and Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

Empirical mode decomposition (EMD)

Yang, Zhijing and Yang, Lihua and Qing, Chunmei (2010) An oblique-extrema-based approach for empirical mode decomposition. Digital Signal Processing, Elsevier, 20 (3). pp. 699-714. ISSN 1051-2004

Energy Management

Bingham, Chris (2010) Power/energy storage technologies and energy management. In: 2010 AECS Advanced engine control symposium, 3-5 November 2010, Tianjin University, P.R. China.

Energy Storage

Gould, C. and Bingham, Chris and Stone, D. and Foster, M. (2010) State-of-Function determination for EV/HEV battery packs. In: The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov 5-9 2010, Shenzhen, China.

Energy storage

Bingham, Chris (2010) Power/energy storage technologies and energy management. In: 2010 AECS Advanced engine control symposium, 3-5 November 2010, Tianjin University, P.R. China.

Engineering Ceramics

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

Ensembling

Riley, Mike J. W. and Jenkins, Karl W. and Thompson, Chris P. (2010) A study of early stopping, ensembling, and patchworking for cascade correlation neural networks. International Journal of Applied Mathematics, 40 (4). pp. 307-316. ISSN 1992-9978

Etch Rate

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Evolutionary Algorithm

Riley, Mike J. W. and Peachey, Tom and Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

Excimer laser

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

Experimental Measurement

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

Experimental decision support

Gladwin, D. and Stewart, P. and Stewart, J. and Chen, R. and Winward, E. (2010) Improved decision support for engine-in-the-loop experimental design optimization. Proceedings of the IMechE, Part D: Automobile Engineering, 224 (2). pp. 201-218. ISSN 0954-4070

Expo 2015

Locatelli, Giorgio and Mancini, Mauro (2010) Risk management in a mega-project: the Universal EXPO 2015 case. International Journal of Project Organisation and Management, 2 (3). pp. 236-253. ISSN 1740-2891

F2 laser

Waugh, David and Lawrence, Jonathan and Walton, Chris and Zakaria, R. (2010) On the effects of using CO2 and F2 lasers to modify the wettability of a polymeric biomaterial. Optics and Laser Technology, 42 (2). pp. 347-356. ISSN 0030-3992

FEM

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

FIR filter bank design via stretching and shifting frequency

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Optimal cosine modulated nonuniform linear phase FIR filter bank design via stretching and shifting frequency response of prototype filter. In: 7th IEEE, IET International Symposium on Communication Systems, Networks, and Digital Signal Processing, 21 - 23 July 2010, Northumbria University, Newcastle upon Tyne.

Fault tolerance

Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios (2010) Modelling and control of a high redundancy actuator. Mechatronics, 20 (1). 102 - 112. ISSN 0957-4158

Femtocell

Chu, Xiaoli and Wu, Yuhua and Benmesbah, Lamia and Ling, Bingo Wing-Kuen (2010) Resource allocation in hybrid macro/femto networks. In: Second International Workshop on Planning and Optimization of Wireless Communication Networks , 18 - 21 April 2010, Sydney, Australia.

Fibre Laser

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

Fibre laser

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

Fibre lasers

Shukla, Pratik and Lawrence, Jonathan (2010) Thermal analysis of fibre laser treated zirconia engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, 14 – 16 July 2010, Manchester, U.K..

Flight simulation

Stewart, P. and Gladwin, D. and Parr, M. and Stewart, J. (2010) Multi-objective evolutionary–fuzzy augmented flight control for an F16 aircraft. Proceedings of the IMechE, Part G: Journal of Aerospace Engineering, 224 (3). pp. 293-309. ISSN 0954-4100

Flow Velocity

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Forming

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

Fracture Toughness (K1c) Engineering ceramic

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by using a fibre laser surface treatment of a silicon nitride engineering ceramic. Journal of Materials Science, 45 (23). pp. 6540-6555. ISSN 0022-2461

Fracture toughness

Shukla, Pratik and Lawrence, Jonathan and Wu, H. (2010) Fracture toughness of a zirconia engineering ceramic and the effects thereon of surface processing with fibre laser radiation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (10). pp. 1555-1569. ISSN 0954-4054

Fuzzy Logic

Stewart, P. and Gladwin, D. and Parr, M. and Stewart, J. (2010) Multi-objective evolutionary–fuzzy augmented flight control for an F16 aircraft. Proceedings of the IMechE, Part G: Journal of Aerospace Engineering, 224 (3). pp. 293-309. ISSN 0954-4100

Ganglion cell

Sen Bhattacharya, Basabdatta and Furber, Steve (2010) Biologically-inspired means for rank-order encoding images: a quantitative analysis. IEEE Transactions on Neural Networks, 21 (7). pp. 1087-1099. ISSN 1045-9227

Genetic algorithms

Stewart, P. and Gladwin, D. and Parr, M. and Stewart, J. (2010) Multi-objective evolutionary–fuzzy augmented flight control for an F16 aircraft. Proceedings of the IMechE, Part G: Journal of Aerospace Engineering, 224 (3). pp. 293-309. ISSN 0954-4100

Georgiadis

Georgiades, Fotios and Scholtz, Peter (2010) Sensitivity of experimental dynamic stiffness of the vibrator-earth system. In: Near Surface 2010 – 16th European Meeting of Environmental and Engineering Geophysics, 6 - 8 September 2010, Zurich.

Gradient descent

Gladwin, D. and Stewart, P. and Stewart, J. and Chen, R. and Winward, E. (2010) Improved decision support for engine-in-the-loop experimental design optimization. Proceedings of the IMechE, Part D: Automobile Engineering, 224 (2). pp. 201-218. ISSN 0954-4070

HIV Therapy

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen (2010) Initiation of HIV therapy. International Journal of Bifurcation and Chaos, 20 (4). pp. 1279-1292. ISSN 0218-1274

Hamming codes

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

Hardware in the loop

Gladwin, D. and Stewart, P. and Stewart, J. and Chen, R. and Winward, E. (2010) Improved decision support for engine-in-the-loop experimental design optimization. Proceedings of the IMechE, Part D: Automobile Engineering, 224 (2). pp. 201-218. ISSN 0954-4070

Harmonic analysis

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Harmonic quality

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

High-frequency switching

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Hole shape

Sian, S and Yao, J and Yao, Y (2010) Effect of hole shape on adiabatic cooling effectiveness. In: WCE 2009, July 2-4, 2009, Imperial College, London, UK.

Hole shpae

Yao, Jun and Sian, Sohan and Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

Hybrid Electric Vehicles

Bingham, Chris (2010) Power/energy storage technologies and energy management. In: 2010 AECS Advanced engine control symposium, 3-5 November 2010, Tianjin University, P.R. China.

IC Engines

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

IRIS

Carelli, Mario and Garrone, Paola and Locatelli, Giorgio and Mancini, Mauro and Mycoff, Clark and Trucco, Paolo and Ricotti, Marco (2010) Economic features of integral, modular, small-to-medium size reactors. Progress in Nuclear Energy, 52 (4). pp. 403-414. ISSN 0149-1970

Inflection point

Yang, Zhijing and Yang, Lihua and Qing, Chunmei (2010) An oblique-extrema-based approach for empirical mode decomposition. Digital Signal Processing, Elsevier, 20 (3). pp. 699-714. ISSN 1051-2004

Intelligent Control

Stewart, Paul (2010) Advanced engine control methodologies for the series-hybrid vehicle. In: 2010 AECS Advanced Engine Control Seminar, 3-5 November 2010, Tianjin University, P.R. China.

Intelligent buildings

Gladwin, D. and Rogers, D. and Bingham, Chris and Stewart, Paul and Wilson, M. and Mitchell, S. and Nortcliffe, R. (2010) Building heating simulation design for control analysis. In: IASTED International Conference on Modelling and Simulation, 6-8 September 2010, Gaborone, Botswana.

Intrinsic mode function (IMF)

Yang, Zhijing and Yang, Lihua and Qing, Chunmei (2010) An oblique-extrema-based approach for empirical mode decomposition. Digital Signal Processing, Elsevier, 20 (3). pp. 699-714. ISSN 1051-2004

Kinetics

Saddawi, A. and Jones, J. M. and Williams, A. and Wojtowicz, M. A. (2010) Kinetics of the thermal decomposition of biomass. Energy & Fuels, 24 (2). pp. 1274-1282. ISSN 08870624

KrF excimer laser

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

LCOE

Locatelli, Giorgio and Mancini, Mauro (2010) Small–medium sized nuclear, coal and gas power plant: a probabilistic analysis of their financial performances and influence of CO2 cost. Energy Policy, 38 (10). pp. 6360-6374. ISSN 0301-4215

LUEC

Locatelli, Giorgio and Mancini, Mauro (2010) Small–medium sized nuclear, coal and gas power plant: a probabilistic analysis of their financial performances and influence of CO2 cost. Energy Policy, 38 (10). pp. 6360-6374. ISSN 0301-4215

Laser forming

Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Temperature gradient mechanism: overview of the multiple pass controlling factors. Physics Procedia, 5 (A). pp. 53-63. ISSN 1875-3892

Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Towards controlled 3D laser forming. In: MATADOR 2010, 14 – 16th July 2010, Manchester.

Lasers

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by means of CO2 laser processing of a silicon nitride engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, July 2010, Manchester.

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by using a fibre laser surface treatment of a silicon nitride engineering ceramic. Journal of Materials Science, 45 (23). pp. 6540-6555. ISSN 0022-2461

Liquid Chemistry

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Liquid Immersion

Dowding, Colin and Lawrence, Jonathan (2010) Ablation debris control by means of closed thick film filtered water immersion. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (5). pp. 753-768. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan (2010) The impact of medium chemistry to flowing liquid closed immersion ablation of bisphenol A polycarbonate. Lasers In Engineering, 19 (5-6). pp. 265-289. ISSN 0898-1507

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Low frequency

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Lyapunov stability.

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Iu, Herbert Ho-Ching (2010) Symbolic dynamical model of average queue size of random early detection algorithm. International Journal of Bifurcation and Chaos, 20 (5). pp. 1415-1437. ISSN 0218-1274

Liu, Kan and Zhang, Q. and Zhu, Z. Q. and Zhang, J. and Shen, A. W. and Stewart, Paul (2010) Comparison of two novel MRAS strategies for identifying parameters in permanent magnet synchronous motors. International Journal of Automation and Computing, 7 (4). pp. 516-524. ISSN 1476-8186

MEMS control

Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.

MEMS devices

Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.

Micro-actuators

Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.

Modularity

Carelli, Mario and Garrone, Paola and Locatelli, Giorgio and Mancini, Mauro and Mycoff, Clark and Trucco, Paolo and Ricotti, Marco (2010) Economic features of integral, modular, small-to-medium size reactors. Progress in Nuclear Energy, 52 (4). pp. 403-414. ISSN 0149-1970

MonteCarlo evaluation

Locatelli, Giorgio and Mancini, Mauro (2010) Small–medium sized nuclear, coal and gas power plant: a probabilistic analysis of their financial performances and influence of CO2 cost. Energy Policy, 38 (10). pp. 6360-6374. ISSN 0301-4215

Multi-objective Optimisation

Riley, Mike J. W. and Peachey, Tom and Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

Multilevel converter

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Multiobjective genetic programming

Stewart, P. and Gladwin, D. and Parr, M. and Stewart, J. (2010) Multi-objective evolutionary–fuzzy augmented flight control for an F16 aircraft. Proceedings of the IMechE, Part G: Journal of Aerospace Engineering, 224 (3). pp. 293-309. ISSN 0954-4100

Navier-Stokes equations

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

Neural Networks

Riley, Mike and Jenkins, Karl W. and Thompson, Chris P. (2010) Improving the performance of cascade correlation neural networks on multimodal functions. In: World Congress on Engineering 2010 , 30 June - 2 July 2010, London, UK.

Non-Linearity

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Nonlinear control

Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.

OFDMA

Chu, Xiaoli and Wu, Yuhua and Benmesbah, Lamia and Ling, Bingo Wing-Kuen (2010) Resource allocation in hybrid macro/femto networks. In: Second International Workshop on Planning and Optimization of Wireless Communication Networks , 18 - 21 April 2010, Sydney, Australia.

Oblique extremum point

Yang, Zhijing and Yang, Lihua and Qing, Chunmei (2010) An oblique-extrema-based approach for empirical mode decomposition. Digital Signal Processing, Elsevier, 20 (3). pp. 699-714. ISSN 1051-2004

Oblique-extrema IMF (OIMF)

Yang, Zhijing and Yang, Lihua and Qing, Chunmei (2010) An oblique-extrema-based approach for empirical mode decomposition. Digital Signal Processing, Elsevier, 20 (3). pp. 699-714. ISSN 1051-2004

Oblique-extrema empirical mode decomposition (OEMD)

Yang, Zhijing and Yang, Lihua and Qing, Chunmei (2010) An oblique-extrema-based approach for empirical mode decomposition. Digital Signal Processing, Elsevier, 20 (3). pp. 699-714. ISSN 1051-2004

Optimal cosine modulated nonuniform linear

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Optimal cosine modulated nonuniform linear phase FIR filter bank design via stretching and shifting frequency response of prototype filter. In: 7th IEEE, IET International Symposium on Communication Systems, Networks, and Digital Signal Processing, 21 - 23 July 2010, Northumbria University, Newcastle upon Tyne.

Optimism bias

Locatelli, Giorgio and Mancini, Mauro (2010) Risk management in a mega-project: the Universal EXPO 2015 case. International Journal of Project Organisation and Management, 2 (3). pp. 236-253. ISSN 1740-2891

Osteoblast cells

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

PMMA

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

Parameter Estimation

Gould, C. and Bingham, Chris and Stone, D. and Foster, M. (2010) State-of-Function determination for EV/HEV battery packs. In: The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov 5-9 2010, Shenzhen, China.

Parkinson’s disease

Modolo, Julien and Bhattacharya, Basabdatta and Edwards, Roderick and Campagnaud, julien and Legros, Alexandre and Beuter, Anne (2010) Using a virtual cortical module implementing a neural field model to modulate brain rhythms in Parkinson’s disease. Frontiers in Neuroscience, 4 (45). pp. 1-11. ISSN 1662-4548

Perceptron training algorithm

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and IU, Herbert Ho-Ching (2010) Invariant set of weight of perceptron trained by perceptron training algorithm. IEEE Transaction on Systems, Man, and Cybernetics, 40 (6). pp. 1521-1530. ISSN 0018-9472

Permanent Magnet Synchronous Motor

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Permanent magnet synchronous motor

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on , 57 (8). pp. 2651-2658. ISSN 0278-0046

Permanent magnets

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Permanent-magnet machine

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Phase currents

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Phase inductance

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Plume Distortion

Dowding, Colin and Lawrence, Jonathan and Holmes, Andrew (2010) Effects of closed immersion filtered water flow velocity on the ablation threshold of bisphenol A polycarbonate during excimer laser machining. Applied Surface Science, 256 (12). pp. 3705-3713. ISSN 0169-4332

Popov stability

Liu, Kan and Zhang, Q. and Zhu, Z. Q. and Zhang, J. and Shen, A. W. and Stewart, Paul (2010) Comparison of two novel MRAS strategies for identifying parameters in permanent magnet synchronous motors. International Journal of Automation and Computing, 7 (4). pp. 516-524. ISSN 1476-8186

Power storage

Bingham, Chris (2010) Power/energy storage technologies and energy management. In: 2010 AECS Advanced engine control symposium, 3-5 November 2010, Tianjin University, P.R. China.

Project Management

Locatelli, Giorgio and Mancini, Mauro (2010) Risk management in a mega-project: the Universal EXPO 2015 case. International Journal of Project Organisation and Management, 2 (3). pp. 236-253. ISSN 1740-2891

Pulsed lasers

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

Residual stress

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

Resonant power conversion

Williams, D. and Bingham, Chris and Foster, M. P. and Stone, D. A. (2010) Hamel locus design of self-oscillating DC-DC resonant converters. Power Electronics, IET , 3 (1). pp. 86-94. ISSN 1755-4535

Response Surface

Riley, Mike and Jenkins, Karl W. and Thompson, Chris P. (2010) Improving the performance of cascade correlation neural networks on multimodal functions. In: World Congress on Engineering 2010 , 30 June - 2 July 2010, London, UK.

Risk Management

Locatelli, Giorgio and Mancini, Mauro (2010) Risk management in a mega-project: the Universal EXPO 2015 case. International Journal of Project Organisation and Management, 2 (3). pp. 236-253. ISSN 1740-2891

SBF.

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

SMR

Carelli, Mario and Garrone, Paola and Locatelli, Giorgio and Mancini, Mauro and Mycoff, Clark and Trucco, Paolo and Ricotti, Marco (2010) Economic features of integral, modular, small-to-medium size reactors. Progress in Nuclear Energy, 52 (4). pp. 403-414. ISSN 0149-1970

Locatelli, Giorgio and Mancini, Mauro (2010) Competitiveness of small-medium, new generation reactors: a comparative study on decommissioning. Journal of Engineering for Gas Turbines and Power, 132 (10). p. 102906. ISSN 0742-4795

Locatelli, Giorgio and Mancini, Mauro (2010) Small–medium sized nuclear, coal and gas power plant: a probabilistic analysis of their financial performances and influence of CO2 cost. Energy Policy, 38 (10). pp. 6360-6374. ISSN 0301-4215

Series-hybrid vehicle

Stewart, Paul (2010) Advanced engine control methodologies for the series-hybrid vehicle. In: 2010 AECS Advanced Engine Control Seminar, 3-5 November 2010, Tianjin University, P.R. China.

Shape Optimisation

Riley, Mike J. W. and Peachey, Tom and Abramson, David and Jenkins, Karl W. (2010) Multi-objective engineering shape optimization using differential evolution interfaced to the Nimrod/O tool. Conference Series: Materials Science and Engineering, 10 (1). pp. 1-10. ISSN 1757-8981

Si3N4 engineering ceramic

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

Simscape

Margetts, Rebecca and Ngwompo, Roger F. (2010) Comparison of modeling techniques for a landing gear. In: ASME IMECE 2010, November 2010, Vancouver, Canada.

Simulated annealing

Gladwin, D. and Stewart, P. and Stewart, J. and Chen, R. and Winward, E. (2010) Improved decision support for engine-in-the-loop experimental design optimization. Proceedings of the IMechE, Part D: Automobile Engineering, 224 (2). pp. 201-218. ISSN 0954-4070

Simulink

Margetts, Rebecca and Ngwompo, Roger F. (2010) Comparison of modeling techniques for a landing gear. In: ASME IMECE 2010, November 2010, Vancouver, Canada.

Sliding mode control

Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.

Small medium plant

Locatelli, Giorgio and Mancini, Mauro (2010) Small–medium sized nuclear, coal and gas power plant: a probabilistic analysis of their financial performances and influence of CO2 cost. Energy Policy, 38 (10). pp. 6360-6374. ISSN 0301-4215

Small-to-medium size reactors

Carelli, Mario and Garrone, Paola and Locatelli, Giorgio and Mancini, Mauro and Mycoff, Clark and Trucco, Paolo and Ricotti, Marco (2010) Economic features of integral, modular, small-to-medium size reactors. Progress in Nuclear Energy, 52 (4). pp. 403-414. ISSN 0149-1970

Space vector modulation

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on , 57 (8). pp. 2651-2658. ISSN 0278-0046

Spray

Meyer, Terrence and Brear, Michael and Jin, Seong-Ho and Gord, James (2010) Formation and diagnostics of sprays in combustion. In: Handbook of combustion. Wiley. ISBN 9783527324491

Subdivision method

Riley, Mike J. W. and Jenkins, Karl W. and Thompson, Chris P. (2010) A study of early stopping, ensembling, and patchworking for cascade correlation neural networks. International Journal of Applied Mathematics, 40 (4). pp. 307-316. ISSN 1992-9978

Surface Treatment

Shukla, Pratik and Lawrence, Jonathan (2010) On the establishment of an appropriate method for evaluating the residual stresses after laser surface treatment of ZrO2 and Si3N4 engineering ceramics. Far East Journal of Mechanical Engineering and Physics, 2 (1 & 2). pp. 103-138. ISSN 2229-4511

Surface modification

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

TGM

Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Temperature gradient mechanism: overview of the multiple pass controlling factors. Physics Procedia, 5 (A). pp. 53-63. ISSN 1875-3892

Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2010) Finite Element modelling of laser forming at macro and micro scales. Physics Procedia, 5 (B). pp. 371-380. ISSN 1875-3892

Technical Ceramics

Shukla, Pratik and Lawrence, Jonathan (2010) Fracture toughness modification by means of CO2 laser processing of a silicon nitride engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, July 2010, Manchester.

Temperature gradient mechanism

Edwardson, Stuart and Griffiths, Jonathan David and Dearden, Geoff and Watkins, Ken (2010) Temperature gradient mechanism: overview of the multiple pass controlling factors. Physics Procedia, 5 (A). pp. 53-63. ISSN 1875-3892

Thermal Analysis

Shukla, Pratik and Lawrence, Jonathan (2010) Thermal analysis of fibre laser treated zirconia engineering ceramic. In: The 36th International Manufacturing Automated Systems Technology Applications Design Organization and Management Research (MATADOR) Conference, 14 – 16 July 2010, Manchester, U.K..

Thermogravimetry

Saddawi, A. and Jones, J. M. and Williams, A. and Wojtowicz, M. A. (2010) Kinetics of the thermal decomposition of biomass. Energy & Fuels, 24 (2). pp. 1274-1282. ISSN 08870624

Topography

Dowding, Colin and Lawrence, Jonathan (2010) Topography of features machined into bisphenol A polycarbonate using closed thick film flowing filtered water immersed KrF excimer laser ablation. Lasers in Engineering, 20 (3-4). pp. 241-262. ISSN 0898-1507

Transmission control protocol

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Iu, Herbert Ho-Ching (2010) Symbolic dynamical model of average queue size of random early detection algorithm. International Journal of Bifurcation and Chaos, 20 (5). pp. 1415-1437. ISSN 0218-1274

Two-channel linear phase FIR QMF bank minimax design

Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Two-channel linear phase FIR QMF bank minimax design via global nonconvex optimization programming. IEEE Transactions on Signal Processing, 58 (8). pp. 4436-4441. ISSN 1058-587x

Uncertain systems

Zolotas, Argyrios (2010) Towards robust sliding mode control of electrostatic microactuators. Masters thesis, University of Leicester.

Variable neighbourhood search

Gladwin, D. and Stewart, P. and Stewart, J. and Chen, R. and Winward, E. (2010) Improved decision support for engine-in-the-loop experimental design optimization. Proceedings of the IMechE, Part D: Automobile Engineering, 224 (2). pp. 201-218. ISSN 0954-4070

Vector spaces, Synchronous motors

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Vickers indentation techniques

Shukla, Pratik and Lawrence, Jonathan and Wu, H. (2010) Fracture toughness of a zirconia engineering ceramic and the effects thereon of surface processing with fibre laser radiation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (10). pp. 1555-1569. ISSN 0954-4054

Visitor numbers.

Locatelli, Giorgio and Mancini, Mauro (2010) Risk management in a mega-project: the Universal EXPO 2015 case. International Journal of Project Organisation and Management, 2 (3). pp. 236-253. ISSN 1740-2891

Voltage drop, Electric motors

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Water particle

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

Wettability

Waugh, David and Lawrence, Jonathan (2010) On the use of CO2 laser induced surface patterns to modify the wettability of Poly(methyl methacrylate) (PMMA). Optics and Lasers in Engineering, 48 (6). pp. 707-715. ISSN UNSPECIFIED

ZrO2 engineering ceramics

Shukla, Pratik and Lawrence, Jonathan and Wu, H. (2010) Fracture toughness of a zirconia engineering ceramic and the effects thereon of surface processing with fibre laser radiation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (10). pp. 1555-1569. ISSN 0954-4054

adiabatic cooling effectiveness

Yao, Jun and Sian, Sohan and Yao, Yufeng and Davis, Tony W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B: Condensed Matter and Statistical Physics , 13 (24). pp. 1295-1298. ISSN 0217-9849

airwake

Forrest, James S. and Owen, Ieuan (2010) An investigation of ship airwakes using Detached-Eddy Simulation. Computers & Fluids, 39 (4). pp. 656-673. ISSN 0045-7930

alkali metals

Saddawi, A. and Jones, J. M. and Williams, A. (2010) Kinetics of the thermal decomposition of biomass and the influence of alkali metals on these kinetics. In: 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France.

Saddawi, A. and Jones, J. M. and Williams, A. and Nowakowski, D. J. and Fuentes, M. E. (2010) Behavior and role of alkali metals in biomass combustion. In: bioten conference on biomass, bioenergy and biofuels, 21 - 23 September 2010, Birmingham, UK.

alpha rhythm

sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2010) A computational modelling approach to investigate alpha rhythm slowing associated with Alzheimer’s disease. In: BICS 2010, 14-16 July 2010, Madrid, Spain.

alpha rhythms; thalamocortical circuitry; Alzheimer's disease

sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2010) Thalamocortical circuitry and alpha rhythm slowing: an empirical study based on a classic computational model. In: IJCNN 2010, 18-23 July 2010, Barcelona.

arbitrary pixel precisions

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Giovanni, Blasi S and Chi, Zhi-Wei and Siu, Wan-Chi (2010) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. In: IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

areal spectral efficiency

Chu, Xiaoli and Wu, Yuhua and Benmesbah, Lamia and Ling, Bingo Wing-Kuen (2010) Resource allocation in hybrid macro/femto networks. In: Second International Workshop on Planning and Optimization of Wireless Communication Networks , 18 - 21 April 2010, Sydney, Australia.

bad line exclusion technique

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

bandpass filter

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Empirical mode decomposition-based facial pose estimation inside video sequences. Optical Engineering, 49 (3). ISSN 0091-3286

bending

Edwardson, Stuart and Griffiths, Jonathan David and Edwards, Kenneth and Dearden, Geoff and Watkins, Ken (2010) Laser forming: overview of the controlling factors in the temperature gradient mechanism. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (5). pp. 1031-1040. ISSN 0954-4062

bifurcation behaviour

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen (2010) Initiation of HIV therapy. International Journal of Bifurcation and Chaos, 20 (4). pp. 1279-1292. ISSN 0218-1274

bioactivity

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

biologically inspired systems

Gaffour, Sidahmed and Mahfouf, Mahdi and Chen, Jun (2010) Optimisation of metal microstructure using a population adaptive based immune algorithm. In: 18th Mediterranean Conference on Control and Automation, 23-25 June 2010, Congress Palace Hotel, Marrakech, Morocco.

biomass

Gudka, B. and Baxter, X. and Darvell, L. I. and Jones, J. M. and Saddawi, A. and Williams, A. and Malmgren, A. and Kilgallon, P. J. and Simms, N. J. (2010) Combustion of two imported biomass feedstocks for co-firing in the UK. In: 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France.

Saddawi, A. and Jones, J. M. and Williams, A. and Nowakowski, D. J. and Fuentes, M. E. (2010) Behavior and role of alkali metals in biomass combustion. In: bioten conference on biomass, bioenergy and biofuels, 21 - 23 September 2010, Birmingham, UK.

Saddawi, A. and Jones, J. M. and Williams, A. and Wojtowicz, M. A. (2010) Kinetics of the thermal decomposition of biomass. Energy & Fuels, 24 (2). pp. 1274-1282. ISSN 08870624

blade cooling effectiveness

Yao, Yufeng and Yao, Jun (2010) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 4 (2). pp. 242-248. ISSN 1755-9758

block diagram

Margetts, Rebecca and Ngwompo, Roger F. (2010) Comparison of modeling techniques for a landing gear. In: ASME IMECE 2010, November 2010, Vancouver, Canada.

bluff body

Forrest, James S. and Owen, Ieuan (2010) An investigation of ship airwakes using Detached-Eddy Simulation. Computers & Fluids, 39 (4). pp. 656-673. ISSN 0045-7930

bmjanomaly

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

bmjcheck

Yao, Jun and Yao, Yufeng (2010) Measurement and prediction of water coverage of blade ring in a turbocharger. In: iccfd6 The Sixth International Conference on Computational Fluid Dynamics, 12-16 July, 2010, Russia.

bmjdoi

Shukla, Pratik and Lawrence, Jonathan and Wu, H. (2010) Fracture toughness of a zirconia engineering ceramic and the effects thereon of surface processing with fibre laser radiation. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224 (10). pp. 1555-1569. ISSN 0954-4054

bmjdoid

Dowding, Colin and Lawrence, Jonathan (2010) Excimer laser machining of bisphenol A polycarbonate under closed immersion filtered water with varying flow velocities and the effects thereof on etch rate. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 224 (10). pp. 1469-1480. ISSN 0954-4054

bmjtype

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

bond graph

Margetts, Rebecca and Ngwompo, Roger F. (2010) Comparison of modeling techniques for a landing gear. In: ASME IMECE 2010, November 2010, Vancouver, Canada.

brain stimulation

Modolo, Julien and Bhattacharya, Basabdatta and Edwards, Roderick and Campagnaud, julien and Legros, Alexandre and Beuter, Anne (2010) Using a virtual cortical module implementing a neural field model to modulate brain rhythms in Parkinson’s disease. Frontiers in Neuroscience, 4 (45). pp. 1-11. ISSN 1662-4548

built environment energy control

Gladwin, D. and Rogers, D. and Bingham, Chris and Stewart, Paul and Wilson, M. and Mitchell, S. and Nortcliffe, R. (2010) Building heating simulation design for control analysis. In: IASTED International Conference on Modelling and Simulation, 6-8 September 2010, Gaborone, Botswana.

chaos

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and IU, Herbert Ho-Ching (2010) Invariant set of weight of perceptron trained by perceptron training algorithm. IEEE Transaction on Systems, Man, and Cybernetics, 40 (6). pp. 1521-1530. ISSN 0018-9472

chemical composition

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

circuit reliability

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

co-firing

Gudka, B. and Baxter, X. and Darvell, L. I. and Jones, J. M. and Saddawi, A. and Williams, A. and Malmgren, A. and Kilgallon, P. J. and Simms, N. J. (2010) Combustion of two imported biomass feedstocks for co-firing in the UK. In: 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France.

coexisting macro/Femto networks using filled function method

Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Chandrasekhar, Vakam and Chu, Xiaoli and Dohler, Mischa (2010) Decentralized spectral resource allocation for OFDMA downlink of coexisting macro/femto networks using filled function method. In: 7th IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

combustion

Gudka, B. and Baxter, X. and Darvell, L. I. and Jones, J. M. and Saddawi, A. and Williams, A. and Malmgren, A. and Kilgallon, P. J. and Simms, N. J. (2010) Combustion of two imported biomass feedstocks for co-firing in the UK. In: 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France.

Saddawi, A. and Jones, J. M. and Williams, A. and Nowakowski, D. J. and Fuentes, M. E. (2010) Behavior and role of alkali metals in biomass combustion. In: bioten conference on biomass, bioenergy and biofuels, 21 - 23 September 2010, Birmingham, UK.

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

combustion,olive residue,pke,pyrolysis,shea residue

Darvell, L. I. and Jones, J. M. and Gudka, B. and Baxter, X. C. and Saddawi, A. and Williams, A. and Malmgren, A. (2010) Combustion properties of some power station biomass fuels. Fuel, 89 (10). pp. 2881-2890. ISSN UNSPECIFIED

complex network

Ling, Wing-Kuen and Stewart, Paul and Teo, Kok-Lay and Tse, Chi-Kong (2010) Study of near consensus complex social networks using eigen theory. In: International Conference on Optimization: Techniques and Applications, 10-13 December, 2010, Shanghai.

computational fluid dynamics; CFD; high temperature; turbine blades; service lifetime; cooling hole geometries; simulation; modelling; penetration depth; coolant jet flow; entrainment; hot fluids; vortex structures.

Yao, Yufeng and Yao, Jun (2010) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 4 (2). pp. 242-248. ISSN 1755-9758

computational fuid dynamics

Forrest, James S. and Owen, Ieuan (2010) An investigation of ship airwakes using Detached-Eddy Simulation. Computers & Fluids, 39 (4). pp. 656-673. ISSN 0045-7930

consensus

Ling, Wing-Kuen and Stewart, Paul and Teo, Kok-Lay and Tse, Chi-Kong (2010) Study of near consensus complex social networks using eigen theory. In: International Conference on Optimization: Techniques and Applications, 10-13 December, 2010, Shanghai.

contact angle.

Waugh, David and Lawrence, Jonathan and Walton, Chris and Zakaria, R. (2010) On the effects of using CO2 and F2 lasers to modify the wettability of a polymeric biomaterial. Optics and Laser Technology, 42 (2). pp. 347-356. ISSN 0030-3992

control engineering

Margetts, Rebecca and Ngwompo, Roger F. (2010) Comparison of modeling techniques for a landing gear. In: ASME IMECE 2010, November 2010, Vancouver, Canada.

cooling

Yao, Jun and Sian, Sohan and Khan, J and Yao, Yufeng (2010) Effect of hole shape on blade cooling effectiveness. In: AIAA 48th Aerospace Sciences Meeting, Jan, 2010, Orlando, FL, USA.

cytotoxicity

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

debris control

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

detached eddy simulation

Forrest, James S. and Owen, Ieuan (2010) An investigation of ship airwakes using Detached-Eddy Simulation. Computers & Fluids, 39 (4). pp. 656-673. ISSN 0045-7930

digital signal processing systems

Ling, Wing-Kuen (2010) Symbolic dynamics of digital signal processing systems. In: Symbolic dynamics of digital signal processing systems, 1/12/2010, Dalian China.

don't care conditions

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

dual-fuel

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

dynamics of the HIV system

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen (2010) Initiation of HIV therapy. International Journal of Bifurcation and Chaos, 20 (4). pp. 1279-1292. ISSN 0218-1274

dysrhythmia

Modolo, Julien and Bhattacharya, Basabdatta and Edwards, Roderick and Campagnaud, julien and Legros, Alexandre and Beuter, Anne (2010) Using a virtual cortical module implementing a neural field model to modulate brain rhythms in Parkinson’s disease. Frontiers in Neuroscience, 4 (45). pp. 1-11. ISSN 1662-4548

empirical mode decomposition

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Empirical mode decomposition-based facial pose estimation inside video sequences. Optical Engineering, 49 (3). ISSN 0091-3286

engine modeling

Stewart, J. and Clarke, A. (2010) A three-zone heat-release rate model for dual-fuel combustion. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (11). pp. 2014-2434. ISSN 0954-4062

ensemble machine learning

Riley, Mike and Jenkins, Karl W. and Thompson, Chris P. (2010) Improving the performance of cascade correlation neural networks on multimodal functions. In: World Congress on Engineering 2010 , 30 June - 2 July 2010, London, UK.

error correcting codes

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

error correction codes

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

event-related (de )synchronisation; focal-ERD/surround-ERS; Alzheimer's Disease; thalamocortical circuitry; lumped computational model

Sen Bhattacharya, Basabdatta and Coyle, Damien and Maguire, Liam (2010) Intra- and inter-connectivity influences on event related changes in thalamocortical alpha rhythms. In: BIC-TA 2010, 23-26 September 2010, Liverpool, UK.

facial pose detection

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Normalized co-occurrence mutual information for facial pose detection inside videos. IEEE Transactions on Circuits and Systems for Video Technology, 20 (12). 1898 -1902. ISSN 1051-8215

facial pose estimation

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Empirical mode decomposition-based facial pose estimation inside video sequences. Optical Engineering, 49 (3). ISSN 0091-3286

fault diagnosis

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

fault rate tolerance techniques

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

fault tolerance

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

fault tolerant issues

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

feature face

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Empirical mode decomposition-based facial pose estimation inside video sequences. Optical Engineering, 49 (3). ISSN 0091-3286

filled function

Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Two-channel linear phase FIR QMF bank minimax design via global nonconvex optimization programming. IEEE Transactions on Signal Processing, 58 (8). pp. 4436-4441. ISSN 1058-587x

finite volume methods

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

flowing liquid immersion

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

frequency response of the prototype filter

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Optimal cosine modulated nonuniform linear phase FIR filter bank design via stretching and shifting frequency response of prototype filter. In: 7th IEEE, IET International Symposium on Communication Systems, Networks, and Digital Signal Processing, 21 - 23 July 2010, Northumbria University, Newcastle upon Tyne.

frigate

Forrest, James S. and Owen, Ieuan (2010) An investigation of ship airwakes using Detached-Eddy Simulation. Computers & Fluids, 39 (4). pp. 656-673. ISSN 0045-7930

fuzzy control

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

fuzzy modeling

Chen, Jun and Mahfouf, Mahdi (2010) Interpretable fuzzy modeling using multi-objective immune-inspired optimization algorithms. In: 2010 IEEE World Congress on Computational Intelligence, July 18-23 2010, Barcelona.

global optimization.

Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Two-channel linear phase FIR QMF bank minimax design via global nonconvex optimization programming. IEEE Transactions on Signal Processing, 58 (8). pp. 4436-4441. ISSN 1058-587x

hole shape

Yao, Yufeng and Yao, Jun (2010) The effect of hole shape on blade cooling effectiveness. International Journal of Engineering Systems Modelling and Simulations, 4 (2). pp. 242-248. ISSN 1755-9758

hole shape effect

Yao, Jun and Sian, Sohan and Yao, Yufeng and Davis, Tony W. (2010) Numerical study of hole shape effect on blade cooling effectiveness. Modern Physics Letters B: Condensed Matter and Statistical Physics , 13 (24). pp. 1295-1298. ISSN 0217-9849

hybrid CMOS-nanoarchitecture

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

hybrid systems

Gaffour, Sidahmed and Mahfouf, Mahdi and Chen, Jun (2010) Optimisation of metal microstructure using a population adaptive based immune algorithm. In: 18th Mediterranean Conference on Control and Automation, 23-25 June 2010, Congress Palace Hotel, Marrakech, Morocco.

idealised physical modelling

Margetts, Rebecca and Ngwompo, Roger F. (2010) Comparison of modeling techniques for a landing gear. In: ASME IMECE 2010, November 2010, Vancouver, Canada.

image processing

Ling, Wing-Kuen (2010) Recent works on optimization for image and video signal processing. In: Recent works on optimization for image and video signal processing, 29/7/2010, Hong Kong.

initiate HIV therapy

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen (2010) Initiation of HIV therapy. International Journal of Bifurcation and Chaos, 20 (4). pp. 1279-1292. ISSN 0218-1274

input selection

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

integrated circuit reliability

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

internet congestion problem

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Iu, Herbert Ho-Ching (2010) Symbolic dynamical model of average queue size of random early detection algorithm. International Journal of Bifurcation and Chaos, 20 (5). pp. 1415-1437. ISSN 0218-1274

interpretability

Chen, Jun and Mahfouf, Mahdi (2010) Interpretable fuzzy modeling using multi-objective immune-inspired optimization algorithms. In: 2010 IEEE World Congress on Computational Intelligence, July 18-23 2010, Barcelona.

intrinsic mode function

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Empirical mode decomposition-based facial pose estimation inside video sequences. Optical Engineering, 49 (3). ISSN 0091-3286

invariant set

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and IU, Herbert Ho-Ching (2010) Invariant set of weight of perceptron trained by perceptron training algorithm. IEEE Transaction on Systems, Man, and Cybernetics, 40 (6). pp. 1521-1530. ISSN 0018-9472

kinetics

Saddawi, A. and Jones, J. M. and Williams, A. (2010) Kinetics of the thermal decomposition of biomass and the influence of alkali metals on these kinetics. In: 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France.

laser

Lawrence , Jonathan and Pou, Juan and Low, David K. Y. and Toyserkani, Ehsan (2010) Advances in laser materials processing: Technology, research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746

laser applications

Lawrence , Jonathan and Pou, Juan and Low, David K. Y. and Toyserkani, Ehsan (2010) Advances in laser materials processing: Technology, research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746

laser forming

Edwardson, Stuart and Griffiths, Jonathan David and Edwards, Kenneth and Dearden, Geoff and Watkins, Ken (2010) Laser forming: overview of the controlling factors in the temperature gradient mechanism. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (5). pp. 1031-1040. ISSN 0954-4062

lateral inhibition

Sen Bhattacharya, Basabdatta and Furber, Steve (2010) Biologically-inspired means for rank-order encoding images: a quantitative analysis. IEEE Transactions on Neural Networks, 21 (7). pp. 1087-1099. ISSN 1045-9227

logic functions

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

look-up tables

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

macrocell

Chu, Xiaoli and Wu, Yuhua and Benmesbah, Lamia and Ling, Bingo Wing-Kuen (2010) Resource allocation in hybrid macro/femto networks. In: Second International Workshop on Planning and Optimization of Wireless Communication Networks , 18 - 21 April 2010, Sydney, Australia.

magnetic gearbox

Montague, R. G. and Bingham, Chris and Atallah, K. (2010) Magnetic gear dynamics for servo control. In: MELECON 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference , 26-28 April 2010, Valetta, Malta.

material removal

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

mathematical modelling

Margetts, Rebecca and Ngwompo, Roger F. (2010) Comparison of modeling techniques for a landing gear. In: ASME IMECE 2010, November 2010, Vancouver, Canada.

mechatronics

Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios (2010) Modelling and control of a high redundancy actuator. Mechatronics, 20 (1). 102 - 112. ISSN 0957-4158

mega-projects

Locatelli, Giorgio and Mancini, Mauro (2010) Risk management in a mega-project: the Universal EXPO 2015 case. International Journal of Project Organisation and Management, 2 (3). pp. 236-253. ISSN 1740-2891

micromachining

Dowding, C. F. and Lawrence, Jonathan (2010) Ablation: a broad term. In: Laser materials processing technology: research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746, 1845694740

motion control

Montague, R. G. and Bingham, Chris and Atallah, K. (2010) Magnetic gear dynamics for servo control. In: MELECON 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference , 26-28 April 2010, Valetta, Malta.

motion estimation with motion vectors

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Giovanni, Blasi S and Chi, Zhi-Wei and Siu, Wan-Chi (2010) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. In: IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

multi-objective optimisation

Chen, Jun and Mahfouf, Mahdi (2010) Interpretable fuzzy modeling using multi-objective immune-inspired optimization algorithms. In: 2010 IEEE World Congress on Computational Intelligence, July 18-23 2010, Barcelona.

multilevel energy converters

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Frequency reduction schemes for back-to-back connected, diode-clamped multilevel converters. Power Electronics, IET , 3 (1). pp. 65-74. ISSN 1755-4535

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on , 57 (8). pp. 2651-2658. ISSN 0278-0046

mutual information

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Normalized co-occurrence mutual information for facial pose detection inside videos. IEEE Transactions on Circuits and Systems for Video Technology, 20 (12). 1898 -1902. ISSN 1051-8215

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Empirical mode decomposition-based facial pose estimation inside video sequences. Optical Engineering, 49 (3). ISSN 0091-3286

neural field model

Modolo, Julien and Bhattacharya, Basabdatta and Edwards, Roderick and Campagnaud, julien and Legros, Alexandre and Beuter, Anne (2010) Using a virtual cortical module implementing a neural field model to modulate brain rhythms in Parkinson’s disease. Frontiers in Neuroscience, 4 (45). pp. 1-11. ISSN 1662-4548

neuro fuzzy modelling

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

neurocontrollers

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

neurodynamics

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and IU, Herbert Ho-Ching (2010) Invariant set of weight of perceptron trained by perceptron training algorithm. IEEE Transaction on Systems, Man, and Cybernetics, 40 (6). pp. 1521-1530. ISSN 0018-9472

neuroprosthetic devices

Modolo, Julien and Bhattacharya, Basabdatta and Edwards, Roderick and Campagnaud, julien and Legros, Alexandre and Beuter, Anne (2010) Using a virtual cortical module implementing a neural field model to modulate brain rhythms in Parkinson’s disease. Frontiers in Neuroscience, 4 (45). pp. 1-11. ISSN 1662-4548

nonconvex optimization problem

Ling, Bingo Wing-Kuen and Ho, Charlotte Yuk-Fan and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Two-channel linear phase FIR QMF bank minimax design via global nonconvex optimization programming. IEEE Transactions on Signal Processing, 58 (8). pp. 4436-4441. ISSN 1058-587x

normalized co-occurrence mutual information

Qing, Chunmei and Jiang, Jianmin and Yang, Zhijing (2010) Normalized co-occurrence mutual information for facial pose detection inside videos. IEEE Transactions on Circuits and Systems for Video Technology, 20 (12). 1898 -1902. ISSN 1051-8215

nuclear reactor

Locatelli, Giorgio and Mancini, Mauro (2010) Competitiveness of small-medium, new generation reactors: a comparative study on decommissioning. Journal of Engineering for Gas Turbines and Power, 132 (10). p. 102906. ISSN 0742-4795

nylon 66

Waugh, David and Lawrence, Jonathan (2010) Using UV laser surface treatment to modify the wettability characteristics of polyamide 6,6 and its effects on osteoblast cell activity. In: ICALEO 2010, 26th - 30th November 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

Waugh, David and Lawrence, Jonathan and Walton, Chris and Zakaria, R. (2010) On the effects of using CO2 and F2 lasers to modify the wettability of a polymeric biomaterial. Optics and Laser Technology, 42 (2). pp. 347-356. ISSN 0030-3992

optimal resource allocation

Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Chandrasekhar, Vakam and Chu, Xiaoli and Dohler, Mischa (2010) Decentralized spectral resource allocation for OFDMA downlink of coexisting macro/femto networks using filled function method. In: 7th IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

optimisation

Gaffour, Sidahmed and Mahfouf, Mahdi and Chen, Jun (2010) Optimisation of metal microstructure using a population adaptive based immune algorithm. In: 18th Mediterranean Conference on Control and Automation, 23-25 June 2010, Congress Palace Hotel, Marrakech, Morocco.

optimization

Ling, Wing-Kuen (2010) Recent works on optimization for image and video signal processing. In: Recent works on optimization for image and video signal processing, 29/7/2010, Hong Kong.

Ling, Wing-Kuen (2010) Recent works on optimization for signal processing. In: Recent works on optimization for signal processing, 29/7/2010, Hong Kong.

osteoblast cells

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

outage probability

Chu, Xiaoli and Wu, Yuhua and Benmesbah, Lamia and Ling, Bingo Wing-Kuen (2010) Resource allocation in hybrid macro/femto networks. In: Second International Workshop on Planning and Optimization of Wireless Communication Networks , 18 - 21 April 2010, Sydney, Australia.

output selection

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

parameter estimation

Liu, Kan and Zhang, Q. and Zhu, Z. Q. and Zhang, J. and Shen, A. W. and Stewart, Paul (2010) Comparison of two novel MRAS strategies for identifying parameters in permanent magnet synchronous motors. International Journal of Automation and Computing, 7 (4). pp. 516-524. ISSN 1476-8186

Wilson, S. D. and Stewart, Paul and Taylor, B. P. (2010) Methods of resistance estimation in permanent magnet synchronous motors for real-time thermal management. IEEE Transactions on Energy Conversion, 25 (3). pp. 698-707. ISSN 0885-8969

perceptually important information

Sen Bhattacharya, Basabdatta and Furber, Steve (2010) Biologically-inspired means for rank-order encoding images: a quantitative analysis. IEEE Transactions on Neural Networks, 21 (7). pp. 1087-1099. ISSN 1045-9227

permanent magnet synchronous motors

Liu, Kan and Zhang, Q. and Zhu, Z. Q. and Zhang, J. and Shen, A. W. and Stewart, Paul (2010) Comparison of two novel MRAS strategies for identifying parameters in permanent magnet synchronous motors. International Journal of Automation and Computing, 7 (4). pp. 516-524. ISSN 1476-8186

Wilson, S. D. and Stewart, Paul and Taylor, B. P. (2010) Methods of resistance estimation in permanent magnet synchronous motors for real-time thermal management. IEEE Transactions on Energy Conversion, 25 (3). pp. 698-707. ISSN 0885-8969

processing gases

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

prototype filter

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Benmesbah, Lamia and Kok, Ted Chi-Wah and Siu, Wan-Chi and Teo, Kok-Lay (2010) Optimal cosine modulated nonuniform linear phase FIR filter bank design via stretching and shifting frequency response of prototype filter. In: 7th IEEE, IET International Symposium on Communication Systems, Networks, and Digital Signal Processing, 21 - 23 July 2010, Northumbria University, Newcastle upon Tyne.

pyrolysis

Saddawi, A. and Jones, J. M. and Williams, A. (2010) Kinetics of the thermal decomposition of biomass and the influence of alkali metals on these kinetics. In: 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France.

random early detection algorithm

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Iu, Herbert Ho-Ching (2010) Symbolic dynamical model of average queue size of random early detection algorithm. International Journal of Bifurcation and Chaos, 20 (5). pp. 1415-1437. ISSN 0218-1274

rank-order codes

Sen Bhattacharya, Basabdatta and Furber, Steve (2010) Biologically-inspired means for rank-order encoding images: a quantitative analysis. IEEE Transactions on Neural Networks, 21 (7). pp. 1087-1099. ISSN 1045-9227

redundancy

Du, X. and Dixon, R. and Goodall, R. M. and Zolotas, Argyrios (2010) Modelling and control of a high redundancy actuator. Mechatronics, 20 (1). 102 - 112. ISSN 0957-4158

resource block

Chu, Xiaoli and Wu, Yuhua and Benmesbah, Lamia and Ling, Bingo Wing-Kuen (2010) Resource allocation in hybrid macro/femto networks. In: Second International Workshop on Planning and Optimization of Wireless Communication Networks , 18 - 21 April 2010, Sydney, Australia.

retinal model

Sen Bhattacharya, Basabdatta and Furber, Steve (2010) Biologically-inspired means for rank-order encoding images: a quantitative analysis. IEEE Transactions on Neural Networks, 21 (7). pp. 1087-1099. ISSN 1045-9227

sensor selection

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

sensors

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

servo mechanism

Montague, R. G. and Bingham, Chris and Atallah, K. (2010) Magnetic gear dynamics for servo control. In: MELECON 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference , 26-28 April 2010, Valetta, Malta.

signal processing

Ling, Wing-Kuen (2010) Recent works on optimization for signal processing. In: Recent works on optimization for signal processing, 29/7/2010, Hong Kong.

simulation tools

Margetts, Rebecca and Ngwompo, Roger F. (2010) Comparison of modeling techniques for a landing gear. In: ASME IMECE 2010, November 2010, Vancouver, Canada.

single step optimal block

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Giovanni, Blasi S and Chi, Zhi-Wei and Siu, Wan-Chi (2010) Single step optimal block matched motion estimation with motion vectors having arbitrary pixel precisions. In: IEEE, IET International Symposium on Communication Systems, Networks and Digital Signal Processing , 21-23 July 2010, University of Northumbria, Newcastle Upon Tyne.

space-vector (SV) modulation (SVM)

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

surface finish

Shukla, Pratik and Lawrence, Jonathan (2010) Surface characterization and compositional evaluation of a fibre laser processed silicon nitride (Si3N4) engineering ceramic. Lasers in Engineering, 20 (5-6). 359 -370. ISSN 0898-1507

surface treatment

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

symbolic dynamics

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and IU, Herbert Ho-Ching (2010) Invariant set of weight of perceptron trained by perceptron training algorithm. IEEE Transaction on Systems, Man, and Cybernetics, 40 (6). pp. 1521-1530. ISSN 0018-9472

Ho, Charlotte Yuk-Fan and Ling, Bingo Wing-Kuen and Iu, Herbert Ho-Ching (2010) Symbolic dynamical model of average queue size of random early detection algorithm. International Journal of Bifurcation and Chaos, 20 (5). pp. 1415-1437. ISSN 0218-1274

Ling, Wing-Kuen (2010) Symbolic dynamics of digital signal processing systems. In: Symbolic dynamics of digital signal processing systems, 1/12/2010, Dalian China.

table lookup

Melouki, Aissa and Srivastava, Saket and Al-Hashimi, Bashir M. (2010) Fault-tolerance techniques for hybrid CMOS/nanoarchitecture. Computers Digital Techniques, IET, 4 (3). pp. 240-250. ISSN 1751-8601

technology

Lawrence , Jonathan and Pou, Juan and Low, David K. Y. and Toyserkani, Ehsan (2010) Advances in laser materials processing: Technology, research and applications. Woodhead Publishing, Cambridge. ISBN 9781845694746

temperature gradient mechanism

Edwardson, Stuart and Griffiths, Jonathan David and Edwards, Kenneth and Dearden, Geoff and Watkins, Ken (2010) Laser forming: overview of the controlling factors in the temperature gradient mechanism. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224 (5). pp. 1031-1040. ISSN 0954-4062

turbulent flow

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

two tank system

Zhou, Yimin and Zolotas, Argyrios (2010) Sensor selection in neuro-fuzzy modelling for fault diagnosis. In: Industrial Electronics (ISIE), 2010 IEEE International Symposium on, 4-7 July 2010, Bari, Italy.

two-phase flow

Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2010) Simulation of gas-water two-phase flow in diesel turbocharger. In: The 6th International Symposium on Multiphase Flow, Heat Mass Transfer and Energy Conversion (AIP Conference Proceedings / Materials Physics and Applications) American Institute of Physics Conference Proceedings. 2010AIPC.1207..723Y, 1207 . American Inst. of Physics, USA, pp. 723-728. ISBN 9780735407442

uncertainty

Locatelli, Giorgio and Mancini, Mauro (2010) Risk management in a mega-project: the Universal EXPO 2015 case. International Journal of Project Organisation and Management, 2 (3). pp. 236-253. ISSN 1740-2891

video signal processing

Ling, Wing-Kuen (2010) Recent works on optimization for image and video signal processing. In: Recent works on optimization for image and video signal processing, 29/7/2010, Hong Kong.

wettability

Waugh, David and Lawrence, Jonathan (2010) CO2 whole area irradiative processing and patterning of nylon 6,6 and the effects thereof on osteoblast cell response in relation to wettability. In: ICALEO 2010, 26th - 30th September 2010, Anaheim, CA, USA.

Waugh, David and Lawrence, Jonathan (2010) Wettability analysis of CO2 laser surface patterned nylon 6,6 samples soaked in simulated body fluid (SBF). In: Proceedings of the 36th International MATADOR Conference 2010. Springer-Verlag, Berlin, pp. 465-468. ISBN 9781849964319

Waugh, David and Lawrence, Jonathan and Walton, Chris and Zakaria, R. (2010) On the effects of using CO2 and F2 lasers to modify the wettability of a polymeric biomaterial. Optics and Laser Technology, 42 (2). pp. 347-356. ISSN 0030-3992

willow

Saddawi, A. and Jones, J. M. and Williams, A. (2010) Kinetics of the thermal decomposition of biomass and the influence of alkali metals on these kinetics. In: 18th European Biomass Conference and Exhibition, 3-7 May 2010, Lyon, France.

This list was generated on Mon Nov 24 14:37:58 2014 GMT.