|Up a level|
Chang, Sehyun and Gordon, Tim J. (2009) Improvement of vehicle dynamics using model-based predictive control. SAE Technical Papers . ISSN UNSPECIFIED
Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166
Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054
Gentili, Luca and Paoli, Andrea and Bonivento, Claudio (2009) Tracking of partially unknown trajectories for permanent magnet synchronous motors. European Journal of Control, 15 (6). pp. 599-612. ISSN 0947-3580
Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2009) Modal analysis of a nonlinear periodic structure with cyclic symmetry. AIAA, 47 (4). pp. 1014-1025. ISSN 0001-1452
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
Gould, C. and Bingham, Chris and Stone, D. A. and Bentley, P. (2009) New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques. Vehicular Technology, IEEE Transactions on , 58 (8). pp. 3905-3916. ISSN 0018-9545
Hield, Peter and Brear, Michael and Jin, Seong-Ho (2009) Thermoacoustic limit cycles in a premixed laboratory combustor with open and choked exits. Combustion and Flame, 156 (9). pp. 1683-1697. ISSN 0010-2180
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180
Lee, Alex C H and Elson, Daniel S and Neil, Mark A and Kumar, Sunil and Ling, Bingo Wing-Kuen and Ello, Fernando and Hanna, George (2009) Solid-state semiconductors are better alternatives to arc-lamps for efficient and uniform illumination in minimal access surgery. Surgical Endoscopy, 23 (3). pp. 518-526. ISSN 0930-2794
Li, Xiangjun and Yu, Xinghuo and Wang, Changhong and Ling, Bingo Wing-Kuen (2009) Periodic input response of a second-order digital filter with two’s complement arithmetic. IEEE Transactions on Circuits and Systems - II: Express Briefs, 56 (3). pp. 225-229. ISSN UNSPECIFIED
Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris and Stone, D. A. (2009) Improved rotor-position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. Industry Applications, IEEE Transactions on, 45 (5). pp. 1843-1850. ISSN 0093-9994
Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098
Lynch, J. P. and Kamat, V. and Li, V. C. and Flynn, M. and Sylvester, D. and Najafi, K. and Gordon, T. and Lepech, M. and Emami-Naeini, A. and Krimotat, A. and Ettouney, M. and Alampalli, S. and Ozdemir, T. (2009) Overview of a cyber-enabled wireless monitoring system for the protection and management of critical infrastructure systems. Proceedings of SPIE - The International Society for Optical Engineering, 7294 . ISSN 0277-786X
Ng, K. W. and Man, H. C. and Lawrence, Jonathan and Yue, T. M. (2009) Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (8). pp. 969-979. ISSN 0954-4054
Srivastava, S. and Sarkar, S. and Bhanja, S. (2009) Estimation of upper bound of power dissipation in QCA circuits. Nanotechnology, IEEE Transactions on, 8 (1). pp. 116-127. ISSN 1536-125X
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931
Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310
Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310
Yang, Zhijing and Yang, Zhihua and Yang, Lihua (2009) Iris recognition based on Hilbert-Huang transform. Advances in Adaptive Data Analysis, 1 (4). pp. 623-641. ISSN 1793-5369
Yao, J. and Yao, Y. and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blade cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849
Yao, Jun and Yao, Yufeng and Mason, Peter J. and Patel, Mayur K. (2009) Numerical simulation of heat transfer in rectangular microchannel. Journal of Advances in Applied Mathematics and Mechanics, 1 (2). pp. 231-241. ISSN 2070-0733
Zhou, J. and Peng, H. and Gordon, T. J. (2009) Characterization of the lateral control performance by human drivers on highways. SAE International Journal of Passenger Cars - Electronic and Electrical Systems, 1 (1). pp. 450-458. ISSN 1946-4614
Chen, Jun and Mahfouf, M. (2009) Artificial immune systems as a bio-inspired optimization technique and its engineering applications. In: Handbook of Research on Artificial Immune Systems and Natural Computing: Applying Complex Adaptive Technologies. IGI Global, pp. 22-48. ISBN 9781605663104
Ling, Wing-Kuen and Ho, Yuk-Fan and Reiss, Joshua (2009) Control of sigma delta modulators via fuzzy impulsive approach. In: Control of chaos in nonlinear circuits and systems. World Scientific Series on Nonlinear Science, Series A, 64 . World Scientific Publishing, pp. 245-270. ISBN 981279056X
Maidi, M. and Yao, Y. and Yao, Jun (2009) Numerical simulation of laminar circular and noncircular jets in cross-flow. In: New trends in fluid mechanics research. Springer, pp. 416-419. ISBN 3540759948
Adornato, B. and Patil, R. and Filipi, Z. and Baraket, Z. and Gordon, T. (2009) Characterizing naturalistic driving patterns for plugin hybrid electric vehicle analysis. In: Vehicle Power and Propulsion Conference, 2009. VPPC '09. IEEE, 7 - 10 September 2009, Dearborn, MI.
Chen, Jun and Mahfouf, M. (2009) An artificial immune systems based predictive modelling approach for the multi-objective elicitation of Mamdani fuzzy rules: a special application to modelling alloys. In: Systems, Man and Cybernetics, 2009. SMC 2009. IEEE International Conference on , 11-14 October 2009, San Antonio, TX .
Chen, Rui and Winward, Edward and Stewart, Paul and Taylor, Ben and Gladwin, Dan (2009) Quasi-constant volume (QCV) spark ignition combustion. In: 2009 SAE World Congress, 20-23 April, 2009, Cobo Centre, Detroit, MI, USA.
Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Foster, M. P. and Stone, D. A. and Bingham, Chris (2009) Automated design of LLC resonant converters using a genetic algorithm. In: PCIM 2009, May 2009, Nurnberg, Germany.
Gordon, T. J. (2009) Nonlinear crossover model of vehicle directional control. In: American Control Conference, St. Louis, MO, 10-12 June 2009.
Griffiths, Jonathan David and Edwardson, Stuart and Dearden, Geoff and Watkins, Ken (2009) Finite element modelling of the laser forming of AISI 1010 steel. In: MATADOR 2010, 14 – 16th July 2010, Manchester.
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part I: low amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, The University of Queensland, Brisbane.
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part II: higher amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, University of Queensland, Brisbane.
Matayoshi, N. and Forrest, J. S. and Hodge, S. J. and Padfield, G. D. and Owen, I. (2009) Relationship between pilot workload and turbulence intensity for helicopter operations in harsh environments. In: Conference of 65th Annual Forum Proceedings - AHS Internationa, 27 - 29 May 2009, Grapevine, Texas.
Minshull, S. and Bingham, Chris and Foster, M. P. and Stone, D. A. (2009) Comparison between multilevel and classical 2-Level inverters regarding stall torque improvements for driving brushless PM machines. In: PCIM Europe 2009, Power Conversion Intelligent Motion Conference, May 2009, Nurnberg, Germany.
Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.
Prithwani, Indra and Otto, Andreas and Scmidt, Michael and Griffiths, Jonathan David and Watkins, Ken and Edwardson, Stuart and Dearden, Geoff (2009) Laser beam forming of aluminium plates under application of moving mesh and adapted heat source. In: Lasers in Manufacturing 2009, 15 - 18 June 2009, Munich.
Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.
Shukla, Pratik and Lawrence, Jonathan (2009) Laser surface treatment of engineering ceramics and the effects thereof on fracture toughness. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009): Laser Materials Processing, 2 - 5 November 2009, Orlando, Florida, USA.
Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2009) Defect tolerance in hybrid nano/CMOS architecture using tagging mechanism. In: Nanoscale Architectures, 2009. NANOARCH '09. IEEE/ACM International Symposium on, 30-31 July 2009, San Francisco, CA.
Srivastava, S. and Melouki, A. and Al-Hashimi, B. M. (2009) Repair techniques for hybrid Nano/CMOS computational architecture. In: Nanotechnology, 2009. IEEE-NANO 2009. 9th IEEE Conference on, 26-30 July 2009, Genoa.
Steffen, Thomas and Zolotas, Argyrios and Dixon, Roger and Goodall, Roger (2009) Adaptive control of a High Redundancy Actuator using the geometric approach. In: 7th IFAC Symposium on Fault Detection, Supervision and Safety of Technical Processes, 30 June - 3 July 2009, Barcelona, Spain.
Stewart, Paul (2009) Electrical storm: novel hybrid electric vehicle R&D. In: Integrating Technologies for Low Carbon Vehicles, 29 September 2009, Lotus Engineering Centre, Hethel, UK.
Stewart, Paul (2009) Optimising the system: challenges in more electric aircraft power system simulation. In: Seminar: IMechE Aerospace Division: energy and Optimisation, 10th November 2009, IET Austin Court Birmingham.
Stone, D. A. and Foster, M. P. and Bingham, C. M. and Stewart, Paul (2009) Digitally controlled converter with an adaptive step size for maximum power point tracking for photovoltaic applications. In: Industrial Electronics, 2008. IECON 2008. 34th Annual Conference of IEEE , 10-13 November 2008, Orlando, Florida, USA.
Walsh, C and Bingham, Chris (2009) Electric drive vehicle deployment in the UK. In: EVS24 International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, May 2009, Stavanger, Norway.
Waugh, David and Lawrence, Jonathan (2009) Wettability characteristics variation of PMMA by means of CO2 laser generated surface patterns. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Zhou, Ronghui and Zolotas, Argyrios and Goodall, Roger (2009) Integrated tilt and active lateral secondary suspension control. In: International Symposium on Speed-Up, Safety and Service Technology for Railway and Maglev Systems 2009 (STECH'09), 16-19 June 2009, Niigata, Japan.
sen Bhattacharya, Basabdatta and Furber, Steve (2009) Evaluating rank-order code performance using a biologically-derived retinal model. In: IJCNN 2010, 14-19 June 2009, Atlanta, USA.
sen Bhattacharya, Basabdatta and Furber, Steve (2009) A biologically inspired algorithm to deal with filter-overlap in retinal models. In: Eighteenth annual Computational Neuroscience meeting CNS*2009, 18-23 July 2009, Berlin, Germany.
Ling, Bingo Wing-Kuen and Lam, Hak-Keung and Iu, Herbert Ho-Ching (2009) Control of chaos in nonlinear circuits and systems. Nonlinear Scientific Series of Nonlinear Science Series A, 64 . World Scientific Publishing, Singapore. ISBN 9789812790569
Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.