Lincoln Repository
Items where Division is "College of Sciences > Faculty of Science > Lincoln School of Engineering" and Year is 2009
 | Up a level |
6
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931
Ablation
Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054
Ablation Threshold
Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166
Adaptive Control
Stone, D. A. and Foster, M. P. and Bingham, C. M. and Stewart, Paul (2009) Digitally controlled converter with an adaptive step size for maximum power point tracking for photovoltaic applications. In: Industrial Electronics, 2008. IECON 2008. 34th Annual Conference of IEEE , 10-13 November 2008, Orlando, Florida, USA.
Battery charge estimation
Gould, C. and Bingham, Chris and Stone, D. A. and Bentley, P. (2009) New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques. Vehicular Technology, IEEE Transactions on , 58 (8). pp. 3905-3916. ISSN 0018-9545
Blade cleaning
Yao, Jun and Yao, Y and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blades cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849
Brushless AC motor
Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris and Stone, D. A. (2009) Improved rotor-position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. Industry Applications, IEEE Transactions on, 45 (5). pp. 1843-1850. ISSN 0093-9994
CFD Modeling
Yao, Jun and Yao, Y and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blades cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849
CFD modeling; water injection; blade cleaning.
Yao, Jun and Yao, Y and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blades cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849
CO2 laser
Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931
Ceramics
Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.
Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.
Chaos
Li, Xiangjun and Yu, Xinghuo and Wang, Changhong and Ling, Bingo Wing-Kuen (2009) Periodic input response of a second-order digital filter with two’s complement arithmetic. IEEE Transactions on Circuits and Systems - II: Express Briefs, 56 (3). pp. 225-229. ISSN UNSPECIFIED
Closed Liquid Immersion
Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Composition
Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.
Computational fluid dynamics
Yao, Jun and Yao, Yufeng and Mason, Peter J. and Patel, Mayur K. (2009) Numerical simulation of heat transfer in rectangular microchannel. Journal of Advances in Applied Mathematics and Mechanics, 2 (1). pp. 231-241. ISSN 2070-0733
Control parametrization enhancing transform
Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098
Debris Control
Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054
Etch Rate
Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166
Flame transfer function
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part II: higher amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, University of Queensland, Brisbane.
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180
Flow Velocity
Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Fracture Toughness (K1c) Engineering ceramic
Shukla, Pratik and Lawrence, Jonathan (2009) Laser surface treatment of engineering ceramics and the effects thereof on fracture toughness. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009): Laser Materials Processing, 2 - 5 November 2009, Orlando, Florida, USA.
Georgiadis
Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2009) Modal analysis of a nonlinear periodic structure with cyclic symmetry. AIAA, 47 (4). pp. 1014-1025. ISSN 0001-1452
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
High frequency power converter
Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.
Hilbert–Huang transform (HHT)
Yang, Zhijing and Yang, Zhihua and Yang, Lihua (2009) Iris recognition based on Hilbert-Huang transform. Advances in Adaptive Data Analysis, 1 (4). pp. 623-641. ISSN 1793-5369
Hybrid Electric Vehicles
Walsh, C and Bingham, Chris (2009) Electric drive vehicle deployment in the UK. In: EVS24 International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, May 2009, Stavanger, Norway.
Hybrid electric vehicles
Stewart, Paul (2009) Electrical storm: novel hybrid electric vehicle R&D. In: Integrating Technologies for Low Carbon Vehicles, 29 September 2009, Lotus Engineering Centre, Hethel, UK.
Illumination
Lee, Alex C H and Elson, Daniel S and Neil, Mark A and Kumar, Sunil and Ling, Bingo Wing-Kuen and Ello, Fernando and Hanna, George (2009) Solid-state semiconductors are better alternatives to arc-lamps for efficient and uniform illumination in minimal access surgery. Surgical Endoscopy, 23 (3). pp. 518-526. ISSN 0930-2794
Impulsive dynamical system
Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098
Iris recognition
Yang, Zhijing and Yang, Zhihua and Yang, Lihua (2009) Iris recognition based on Hilbert-Huang transform. Advances in Adaptive Data Analysis, 1 (4). pp. 623-641. ISSN 1793-5369
KrF excimer laser
Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166
Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054
Laminar premixed flame
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180
Laminar premixed flames
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part I: low amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, The University of Queensland, Brisbane.
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part II: higher amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, University of Queensland, Brisbane.
Laser
Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.
Laser surface alloying
Ng, K. W. and Man, H. C. and Lawrence, Jonathan and Yue, T. M. (2009) Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (8). pp. 969-979. ISSN 0954-4054
Lasers
Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.
Shukla, Pratik and Lawrence, Jonathan (2009) Laser surface treatment of engineering ceramics and the effects thereof on fracture toughness. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009): Laser Materials Processing, 2 - 5 November 2009, Orlando, Florida, USA.
Light-emitting diode
Lee, Alex C H and Elson, Daniel S and Neil, Mark A and Kumar, Sunil and Ling, Bingo Wing-Kuen and Ello, Fernando and Hanna, George (2009) Solid-state semiconductors are better alternatives to arc-lamps for efficient and uniform illumination in minimal access surgery. Surgical Endoscopy, 23 (3). pp. 518-526. ISSN 0930-2794
Microstructure
Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.
Modulation strategy
Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.
More electric aircraft
Stewart, Paul (2009) Optimising the system: challenges in more electric aircraft power system simulation. In: Seminar: IMechE Aerospace Division: energy and Optimisation, 10th November 2009, IET Austin Court Birmingham.
NiTi
Ng, K. W. and Man, H. C. and Lawrence, Jonathan and Yue, T. M. (2009) Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (8). pp. 969-979. ISSN 0954-4054
Non-linearity
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180
Nonlinear targeted energy transfers
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
Open Thin Film Liquid Immersion
Dowding, Colin and Lawrence, Jonathan (2009) Impact of open de-ionized water thin film laminar immersion on the liquid immersed ablation threshold and ablation rate of features machined by KrF excimer laser ablation of bisphenol A polycarbonate. Optics and Lasers in engineering, 47 (11). pp. 1169-1176. ISSN 0143-8166
PMMA
Waugh, David and Lawrence, Jonathan (2009) Wettability characteristics variation of PMMA by means of CO2 laser generated surface patterns. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Power converter
Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098
Premixed combustion
Hield, Peter and Brear, Michael and Jin, Seong-Ho (2009) Thermoacoustic limit cycles in a premixed laboratory combustor with open and choked exits. Combustion and Flame, 156 (9). pp. 1683-1697. ISSN 0010-2180
Resonant converter
Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.
Resonant power conversion
Foster, M. P. and Stone, D. A. and Bingham, Chris (2009) Automated design of LLC resonant converters using a genetic algorithm. In: PCIM 2009, May 2009, Nurnberg, Germany.
Semi-infinite programming
Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098
Sensorless control
Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris and Stone, D. A. (2009) Improved rotor-position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. Industry Applications, IEEE Transactions on, 45 (5). pp. 1843-1850. ISSN 0093-9994
Shock Processing
Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.
Switched linear system
Loxton, R C and Teo, K L and Rehbock, V and Ling, Bingo Wing-Kuen (2009) Optimal switching instants for a switched-capacitor DC/DC power converter. Automatica, 45 (4). pp. 973-980. ISSN 0005-1098
Taguchi method
Ng, K. W. and Man, H. C. and Lawrence, Jonathan and Yue, T. M. (2009) Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (8). pp. 969-979. ISSN 0954-4054
Thermo-acoustics
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part I: low amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, The University of Queensland, Brisbane.
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part II: higher amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, University of Queensland, Brisbane.
Thermoacoustic instability
Hield, Peter and Brear, Michael and Jin, Seong-Ho (2009) Thermoacoustic limit cycles in a premixed laboratory combustor with open and choked exits. Combustion and Flame, 156 (9). pp. 1683-1697. ISSN 0010-2180
Thermoacoustics
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180
Thin Film Liquid Immersion
Dowding, Colin and Lawrence, Jonathan (2009) Use of thin laminar liquid flows above ablation area for control of ejected material during excimer machining. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 223 (7). pp. 759-775. ISSN 0954-4054
Topograpghy
Shukla, Pratik and Lawrence, Jonathan (2009) Characterization and compositional evaluation of laser processed engineering ceramics. In: The 27th International Congress on Applications of Lasers and Electro-Optics (ICALEO 2009), 2 - 5 November 2009, Orlando, FL., USA.
Water injection
Yao, Jun and Yao, Y and Mason, P. J. and Zhang, T. and Heyes, F. J. G. and Roach, P. E. (2009) CFD modelling of water injection for blades cleaning. Modern Physics Letters B: Condensed Matter and Statistical Physics , 23 (3). pp. 341-344. ISSN 0217-9849
Wettability
Waugh, David and Lawrence, Jonathan (2009) Wettability characteristics variation of PMMA by means of CO2 laser generated surface patterns. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
artificial immune systems
Chen, Jun and Mahfouf, M. (2009) Artificial immune systems as a bio-inspired optimization technique and its engineering applications. In: Handbook of Research on Artificial Immune Systems and Natural Computing: Applying Complex Adaptive Technologies. IGI Global, pp. 22-48. ISBN 9781605663104
Chen, Jun and Mahfouf, M. (2009) An artificial immune systems based predictive modelling approach for the multi-objective elicitation of Mamdani fuzzy rules: a special application to modelling alloys. In: Systems, Man and Cybernetics, 2009. SMC 2009. IEEE International Conference on , 11-14 October 2009, San Antonio, TX .
atmospheric conditions
Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
bioactivity
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931
bmjlink
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Dynamic response of a ducted laminar premixed flame, part II: higher amplitude forcing. In: Australian Combustion Symposium, 2-4 December 2009, University of Queensland, Brisbane.
bmjtype
Shukla, Pratik (2009) Shock peening of engineering ceramics using contact-less energy beams. The Shot Peener, USA.
chaos control
Ling, Bingo Wing-Kuen and Lam, Hak-Keung and Iu, Herbert Ho-Ching (2009) Control of chaos in nonlinear circuits and systems. Nonlinear Scientific Series of Nonlinear Science Series A, 64 . World Scientific Publishing, Singapore. ISBN 9789812790569
Ling, Wing-Kuen and Ho, Yuk-Fan and Reiss, Joshua (2009) Control of sigma delta modulators via fuzzy impulsive approach. In: Control of chaos in nonlinear circuits and systems. World Scientific Series on Nonlinear Science, Series A, 64 . World Scientific Publishing, pp. 245-270. ISBN 981279056X
circuits and systems
Ling, Wing-Kuen and Ho, Yuk-Fan and Reiss, Joshua (2009) Control of sigma delta modulators via fuzzy impulsive approach. In: Control of chaos in nonlinear circuits and systems. World Scientific Series on Nonlinear Science, Series A, 64 . World Scientific Publishing, pp. 245-270. ISBN 981279056X
combustion
Chen, Rui and Winward, Edward and Stewart, Paul and Taylor, Ben and Gladwin, Dan (2009) Quasi-constant volume (QCV) spark ignition combustion. In: 2009 SAE World Congress, 20-23 April, 2009, Cobo Centre, Detroit, MI, USA.
continuous circuits and systems
Ling, Bingo Wing-Kuen and Lam, Hak-Keung and Iu, Herbert Ho-Ching (2009) Control of chaos in nonlinear circuits and systems. Nonlinear Scientific Series of Nonlinear Science Series A, 64 . World Scientific Publishing, Singapore. ISBN 9789812790569
debris control
Dowding, Colin and Lawrence, Jonathan (2009) Use of enclosed thin laminar liquid flows above ablation area for control of ejected material during excimer machining. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
discrete circuits and systems
Ling, Bingo Wing-Kuen and Lam, Hak-Keung and Iu, Herbert Ho-Ching (2009) Control of chaos in nonlinear circuits and systems. Nonlinear Scientific Series of Nonlinear Science Series A, 64 . World Scientific Publishing, Singapore. ISBN 9789812790569
dynamic symbolic sequence
Li, Xiangjun and Yu, Xinghuo and Wang, Changhong and Ling, Bingo Wing-Kuen (2009) Periodic input response of a second-order digital filter with two’s complement arithmetic. IEEE Transactions on Circuits and Systems - II: Express Briefs, 56 (3). pp. 225-229. ISSN UNSPECIFIED
empirical mode decomposition (EMD)
Yang, Zhijing and Yang, Zhihua and Yang, Lihua (2009) Iris recognition based on Hilbert-Huang transform. Advances in Adaptive Data Analysis, 1 (4). pp. 623-641. ISSN 1793-5369
heat sink
Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310
induction heating
Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.
laser surface patterning
Waugh, David and Lawrence, Jonathan (2009) Wettability characteristics variation of PMMA by means of CO2 laser generated surface patterns. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
main frequency center
Yang, Zhijing and Yang, Zhihua and Yang, Lihua (2009) Iris recognition based on Hilbert-Huang transform. Advances in Adaptive Data Analysis, 1 (4). pp. 623-641. ISSN 1793-5369
mamdani fuzzy modeling
Chen, Jun and Mahfouf, M. (2009) An artificial immune systems based predictive modelling approach for the multi-objective elicitation of Mamdani fuzzy rules: a special application to modelling alloys. In: Systems, Man and Cybernetics, 2009. SMC 2009. IEEE International Conference on , 11-14 October 2009, San Antonio, TX .
matrix power converter
Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on , 8-10 Sept 2009, Barcelona.
minimal access surgery
Lee, Alex C H and Elson, Daniel S and Neil, Mark A and Kumar, Sunil and Ling, Bingo Wing-Kuen and Ello, Fernando and Hanna, George (2009) Solid-state semiconductors are better alternatives to arc-lamps for efficient and uniform illumination in minimal access surgery. Surgical Endoscopy, 23 (3). pp. 518-526. ISSN 0930-2794
modal analysis
Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2009) Modal analysis of a nonlinear periodic structure with cyclic symmetry. AIAA, 47 (4). pp. 1014-1025. ISSN 0001-1452
multilevel inverters
Minshull, S. and Bingham, Chris and Foster, M. P. and Stone, D. A. (2009) Comparison between multilevel and classical 2-Level inverters regarding stall torque improvements for driving brushless PM machines. In: PCIM Europe 2009, Power Conversion Intelligent Motion Conference, May 2009, Nurnberg, Germany.
nonlinear
Li, Xiangjun and Yu, Xinghuo and Wang, Changhong and Ling, Bingo Wing-Kuen (2009) Periodic input response of a second-order digital filter with two’s complement arithmetic. IEEE Transactions on Circuits and Systems - II: Express Briefs, 56 (3). pp. 225-229. ISSN UNSPECIFIED
nonlinear modal interactions
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
nylon 6
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931
nylon 66
Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
osteoblast cells
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931
parameter estimation
Gould, C. and Bingham, Chris and Stone, D. A. and Bentley, P. (2009) New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques. Vehicular Technology, IEEE Transactions on , 58 (8). pp. 3905-3916. ISSN 0018-9545
rapid prototyping
Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310
rectangular microchannel
Yao, Jun and Yao, Yufeng and Mason, Peter J. and Patel, Mayur K. (2009) Numerical simulation of heat transfer in rectangular microchannel. Journal of Advances in Applied Mathematics and Mechanics, 2 (1). pp. 231-241. ISSN 2070-0733
ref15
Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2009) Modal analysis of a nonlinear periodic structure with cyclic symmetry. AIAA, 47 (4). pp. 1014-1025. ISSN 0001-1452
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
Hield, Peter and Brear, Michael and Jin, Seong-Ho (2009) Thermoacoustic limit cycles in a premixed laboratory combustor with open and choked exits. Combustion and Flame, 156 (9). pp. 1683-1697. ISSN 0010-2180
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180
Ng, K. W. and Man, H. C. and Lawrence, Jonathan and Yue, T. M. (2009) Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (8). pp. 969-979. ISSN 0954-4054
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931
refdoi
Georgiades, Fotios and Peeters, Maxime and Kerschen, Gaetan and Golinval, Jean-Claude and Ruzzene, Massimo (2009) Modal analysis of a nonlinear periodic structure with cyclic symmetry. AIAA, 47 (4). pp. 1014-1025. ISSN 0001-1452
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
Hield, Peter and Brear, Michael and Jin, Seong-Ho (2009) Thermoacoustic limit cycles in a premixed laboratory combustor with open and choked exits. Combustion and Flame, 156 (9). pp. 1683-1697. ISSN 0010-2180
Karimi, Nader and Brear, Michael and Jin, Seong-Ho and Monty, Jason (2009) Linear and non-linear forced response of a conical, ducted, laminar premixed flame. Combustion and Flame, 156 (11). pp. 2201-2212. ISSN 0010-2180
Ng, K. W. and Man, H. C. and Lawrence, Jonathan and Yue, T. M. (2009) Parametrical optimization of laser surface alloyed NiTi shape memory alloy with Co and Nb by the Taguchi method. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (8). pp. 969-979. ISSN 0954-4054
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931
scaling effect
Yao, Jun and Yao, Yufeng and Mason, Peter J. and Patel, Mayur K. (2009) Numerical simulation of heat transfer in rectangular microchannel. Journal of Advances in Applied Mathematics and Mechanics, 2 (1). pp. 231-241. ISSN 2070-0733
selective laser melting
Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by selective laser melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310
shock isolation
Georgiades, Fotios and Vakakis, Alexander, F. (2009) Passive targeted energy transfers and strong modal interactions in the dynamics of a thin plate with strongly nonlinear attachments. International Journal of Solids and Structures, 46 (11-12). pp. 2330-2353. ISSN 0020-7683
solid-state semiconductor
Lee, Alex C H and Elson, Daniel S and Neil, Mark A and Kumar, Sunil and Ling, Bingo Wing-Kuen and Ello, Fernando and Hanna, George (2009) Solid-state semiconductors are better alternatives to arc-lamps for efficient and uniform illumination in minimal access surgery. Surgical Endoscopy, 23 (3). pp. 518-526. ISSN 0930-2794
spark ignition
Chen, Rui and Winward, Edward and Stewart, Paul and Taylor, Ben and Gladwin, Dan (2009) Quasi-constant volume (QCV) spark ignition combustion. In: 2009 SAE World Congress, 20-23 April, 2009, Cobo Centre, Detroit, MI, USA.
state of health estimation
Gould, C. and Bingham, Chris and Stone, D. A. and Bentley, P. (2009) New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques. Vehicular Technology, IEEE Transactions on , 58 (8). pp. 3905-3916. ISSN 0018-9545
surface treatment
Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
thermal resistance.
Yao, Jun and Yao, Yufeng and Mason, Peter J. and Patel, Mayur K. (2009) Numerical simulation of heat transfer in rectangular microchannel. Journal of Advances in Applied Mathematics and Mechanics, 2 (1). pp. 231-241. ISSN 2070-0733
wettability
Waugh, David and Lawrence, Jonathan and Morgan, D.J. (2009) Investigation into time dependant degradation and atmospheric conditions on the wettability of nylon 6,6 which has undergone CO2 laser surface modification. In: ICALEO 2009, 2nd - 5th November 2009, Orlando, FL, USA..
Waugh, David and Lawrence, Jonathan and Morgan, David and Thomas, Carolyn (2009) Interaction of CO2 laser-modified nylon with osteoblast cells in relation to wettability. Materials Science and Engineering C: Materials for Biological Applications, 29 (8). pp. 2514-2524. ISSN 0928-4931