Items where Division is "College of Science > School of Engineering" and Year is 2002

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type | No Grouping
ABS Acceleration Actuators Al2O3 Beam delivery Bio-ceramic Boundary value problems CO2 laser Ceramic Ceramic tiles Cold-rolled stainless steel Collision avoidance Convergence of numerical methods Distributed simulation Drive by wire Driveability EXAFS Electric vehicles Enamel Epoxy tile grout Feedback control Fuzzy-logic control Gas Genetic algorithms Georgiadis Glaze Global optimization Grout High power diode laser (HPDL) Hybrid Electric Vehicles Interaction characteristics Keywords: Edge linking Laser Learning systems Life characteristics Magnetic Analysis Magnetic forces Micro-plasto-hydrodynamic lubrication Model Reference control Motion planning Motor racing Multiobjective Optimisation Multiobjective evolutionary algorithm Non-linear dynamics Optimisation PMSM Partially stabilised zirconia (PSZ) Permanent Magnet AC motor Pit geometry Platinum Pole placement Power systems Predictive Control Random processes, Learning automata (LA), Automata theory Real-time Simulation Reluctance Machines Removal Resonant converters Response Surface Response Surfaces Robust design Safety Single-stage seal State estimation Surface glazing Thermal loading Threshold fluence Tile Traction control Vehicle dynamics, Automobile driver simulators Velocity, Automated driver Wear absorption active magnetic bearings anti-lock braking bending bmjdoi bmjfind bond lengths boundary extraction carbon catalysts control systems analysis and design corrosion dentistry digital filters with two's complement arithmetic diode edge detection edge map electric vehicle electrochemistry erosion extended kalman filter finite element modelling fluorescence forming fuzzy edge detection module fuzzy edge linking module fuzzy membership matrix fuzzy switch grout grout characteristics grout sealing harmonic distortion high power diode laser (HPDL) laser laser materials processing melting metal mild steel molybdenum multivariable control oxidation parallel permanent magnet actuators platinum refractory regenerative braking resonant converter sealing system sheet surface energy surface glazing surface treatment third order transmission electron microscopy vitrification wear life characteristics wettability
Number of items: 159.

ABS

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

Acceleration

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

Actuators

Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464

Al2O3

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

Beam delivery

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Bio-ceramic

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Boundary value problems

Howell, M. N. and Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

CO2 laser

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

Ceramic

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Ceramic tiles

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Cold-rolled stainless steel

Sutcliffe, M. P.F. and Georgiades, F. (2002) Characterisation of pit geometry in cold-rolled stainless steel strip. Wear, 253 (9-10). pp. 963-974. ISSN 0043-1648

Collision avoidance

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

Convergence of numerical methods

Howell, M. N. and Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Distributed simulation

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A. (2002) On the response surface methodology and designed experiments for computationally intensive distributed aerospace simulations. In: 2002 Winter Simulation conference, 8-11 December 2002, Hyatt Regency Hotel, San Diego, California, USA.

Drive by wire

Zavala, J. C. and Stewart, Paul and Fleming, P. J. (2002) Multiobjective automotive drive by wire controller design. In: Proceedings of 2002 IEEE International Symposium on Computer Aided Control System Design, 18-20 September 2002, Glasgow, Scotland, UK.

Driveability

Zavala, J. C. and Stewart, Paul and Fleming, P. J. (2002) Multiobjective automotive drive by wire controller design. In: Proceedings of 2002 IEEE International Symposium on Computer Aided Control System Design, 18-20 September 2002, Glasgow, Scotland, UK.

EXAFS

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

Electric vehicles

Howe, D. and Schofield, N. and Bingham, Chris (2002) Energy optimised traction system for all-electric vehicles. IEE Power Engineering Journal, 16 (1). pp. 29-32. ISSN 1479-8344

Enamel

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Epoxy tile grout

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Feedback control

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

Fuzzy-logic control

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

Gas

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Genetic algorithms

Howell, M. N. and Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Georgiadis

Sutcliffe, M. P.F. and Georgiades, F. (2002) Characterisation of pit geometry in cold-rolled stainless steel strip. Wear, 253 (9-10). pp. 963-974. ISSN 0043-1648

Glaze

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Global optimization

Howell, M. N. and Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Grout

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

High power diode laser (HPDL)

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Hybrid Electric Vehicles

Schofield, N. and Bingham, Chris and Howe, D. (2002) Regenerative braking for all-electric and hybrid electric vehicles. In: IMechE Braking 2002 Conference, 2002, Leeds, UK.

Interaction characteristics

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Keywords: Edge linking

Ling, Wing-Kuen and Tam, Kwong-Shun (2002) Closed boundary extraction of cancer cells using fuzzy edge linking technique. In: SPIE Symposium-Image Processing: Algorithms and Systems, January 2002, San Jose.

Laser

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Learning systems

Howell, M. N. and Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Life characteristics

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Magnetic Analysis

Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464

Magnetic forces

Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464

Micro-plasto-hydrodynamic lubrication

Sutcliffe, M. P.F. and Georgiades, F. (2002) Characterisation of pit geometry in cold-rolled stainless steel strip. Wear, 253 (9-10). pp. 963-974. ISSN 0043-1648

Model Reference control

Stewart, Paul and Kadirkamanathan, V. (2002) Dynamic control of permanent magnet synchronous motors for automotive drive applications. In: American Control conference 1999, June 1999, San Diego, California, USA.

Motion planning

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

Motor racing

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

Multiobjective Optimisation

Zavala, J. C. and Stewart, Paul and Fleming, P. J. (2002) Multiobjective automotive drive by wire controller design. In: Proceedings of 2002 IEEE International Symposium on Computer Aided Control System Design, 18-20 September 2002, Glasgow, Scotland, UK.

Multiobjective evolutionary algorithm

Stewart, Paul and Jewell, G. W. and Clarke, R. E. and Fleming, P. J. (2002) Controllability analysis of multi objective control systems. In: Proceedings of the 2002 IEEE International Symposium on Computer Aided Control System Design, 18-20 September 2002, Glasgow, Scotland, UK.

Non-linear dynamics

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

Optimisation

Howe, D. and Schofield, N. and Bingham, Chris (2002) Energy optimised traction system for all-electric vehicles. IEE Power Engineering Journal, 16 (1). pp. 29-32. ISSN 1479-8344

PMSM

Bhangu, B. and Bingham, Chris and Coles, J. and Williams, C. (2002) EKFs and other nonlinear state estimation techniques for sensorless control of automotive PMSMs. In: Speedam Conference 2002, 11-14 June 2002, Ravello, Italy.

Partially stabilised zirconia (PSZ)

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Permanent Magnet AC motor

Stewart, Paul and Kadirkamanathan, V. (2002) Dynamic control of permanent magnet synchronous motors for automotive drive applications. In: American Control conference 1999, June 1999, San Diego, California, USA.

Pit geometry

Sutcliffe, M. P.F. and Georgiades, F. (2002) Characterisation of pit geometry in cold-rolled stainless steel strip. Wear, 253 (9-10). pp. 963-974. ISSN 0043-1648

Platinum

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Pole placement

Zavala, J. C. and Stewart, Paul and Fleming, P. J. (2002) Multiobjective automotive drive by wire controller design. In: Proceedings of 2002 IEEE International Symposium on Computer Aided Control System Design, 18-20 September 2002, Glasgow, Scotland, UK.

Power systems

Howe, D. and Schofield, N. and Bingham, Chris (2002) Energy optimised traction system for all-electric vehicles. IEE Power Engineering Journal, 16 (1). pp. 29-32. ISSN 1479-8344

Predictive Control

Stewart, Paul and Fleming, P. J. (2002) The response surface methodology for rapid prototyping of real-time control systems. In: American Control Conference. , 8-10 May 2002, Hilton Hotel, Anchorage, Alaska.

Random processes, Learning automata (LA), Automata theory

Howell, M. N. and Gordon, Timothy and Brandao, F. V. (2002) Genetic learning automata for function optimization. IEEE Transactions on Systems, Man, and Cybernetics, Part B: Cybernetics, 32 (6). pp. 804-815. ISSN 1083-4419

Real-time Simulation

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A. (2002) On the response surface methodology and designed experiments for computationally intensive distributed aerospace simulations. In: 2002 Winter Simulation conference, 8-11 December 2002, Hyatt Regency Hotel, San Diego, California, USA.

Reluctance Machines

Clarke, R. E. and Jewell, G. W. and Stewart, Paul and Howe, D. (2002) Tailoring force-displacement characteristics in medium-stroke linear variable reluctance actuators. IEEE Transactions on Magnetics, 38 (5). pp. 3267-3269. ISSN 0018-9464

Removal

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Resonant converters

Ang, Y. and Foster, M. P. and Sewell, H. I. and Bingham, Chris and Stone, D. A. (2002) Stress analysis of fourth-order LLCC resonant converters. IEE Electronics Letters , 38 (24). pp. 1585-1586. ISSN 0013-5194

Response Surface

Stewart, Paul and Fleming, P. J. (2002) The response surface methodology for rapid prototyping of real-time control systems. In: American Control Conference. , 8-10 May 2002, Hilton Hotel, Anchorage, Alaska.

Response Surfaces

Stewart, Paul and Fleming, P. J. and MacKenzie, S. A. (2002) On the response surface methodology and designed experiments for computationally intensive distributed aerospace simulations. In: 2002 Winter Simulation conference, 8-11 December 2002, Hyatt Regency Hotel, San Diego, California, USA.

Robust design

Stewart, Paul and Jewell, G. W. and Clarke, R. E. and Fleming, P. J. (2002) Controllability analysis of multi objective control systems. In: Proceedings of the 2002 IEEE International Symposium on Computer Aided Control System Design, 18-20 September 2002, Glasgow, Scotland, UK.

Safety

Lawrence, Jonathan and Minami, Kanaka and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) The development and characteristics of a hand-held high power diode laser-based industrial tile grout removal and single-stage sealing system. Journal of Laser Applications, 14 (4). pp. 230-241. ISSN 1042 -346X

Lawrence, Jonathan and Schmidt, Marc J. J. and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) A portable high power diode laser-based single-stage ceramic tile grout sealing system. Optics & Laser Technology, 34 (1). pp. 27-36. ISSN 0030-3992

Single-stage seal

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

State estimation

Bhangu, B. and Bingham, Chris and Coles, J. and Williams, C. (2002) EKFs and other nonlinear state estimation techniques for sensorless control of automotive PMSMs. In: Speedam Conference 2002, 11-14 June 2002, Ravello, Italy.

Surface glazing

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

Thermal loading

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Threshold fluence

Lawrence, Jonathan (2002) Contrasting the beam interaction characteristics of selected lasers with a partially stabilised zirconia (PSZ) bio-ceramic. Journal of Physics D: Applied Physics, 35 (15). pp. 1828-1832. ISSN 0022-3727

Tile

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale, Andrew G. (2002) The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal. Surface and Coatings Technology, 160 (1). pp. 7-13. ISSN 0257-8972

Traction control

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

Vehicle dynamics, Automobile driver simulators

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

Velocity, Automated driver

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

Wear

Lawrence, Jonathan and Li, Lin and Edwards, Roger E. and Gale , Andrew G. (2002) A comparative investigation of the wear characteristics of a high power diode laser generated single-stage tile grout and commercial epoxy tile grout. Wear, 252 (1-2). pp. 88-95. ISSN 0043-1648

absorption

Lawrence, Jonathan and Minami, Kanaka and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material. Applied Surface Science, 186 (1-4). pp. 162-165. ISSN 0169-4332

active magnetic bearings

Peel, D. and Bingham, Chris and Wu, Y. and Howe, D. (2002) Simplified characteristics of active magnetic bearings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 216 (5). pp. 623-628. ISSN 0954-4062

anti-lock braking

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

bending

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

bmjdoi

Gordon, T. J. and Best, M. C. and Dixon, P. J. (2002) An automated driver based on convergent vector fields. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 216 (4). pp. 329-347. ISSN 0954-4070

bmjfind

Ling, Bingo Wing-Kuen and Tam, Kwong-Shun (2002) Edge detection via fuzzy switch. SPIE International Technical Group Newsletter, 12 (2). p. 2. ISSN UNSPECIFIED

bond lengths

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

boundary extraction

Ling, Wing-Kuen and Tam, Kwong-Shun (2002) Closed boundary extraction of cancer cells using fuzzy edge linking technique. In: SPIE Symposium-Image Processing: Algorithms and Systems, January 2002, San Jose.

carbon

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

catalysts

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

control systems analysis and design

Stewart, Paul and Jewell, G. W. and Clarke, R. E. and Fleming, P. J. (2002) Controllability analysis of multi objective control systems. In: Proceedings of the 2002 IEEE International Symposium on Computer Aided Control System Design, 18-20 September 2002, Glasgow, Scotland, UK.

corrosion

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

dentistry

Lawrence, Jonathan (2002) On the potential role of the high power diode laser in modern dentistry. Independent Dentistry, 3 (1). pp. 34-36. ISSN 1466-0679

digital filters with two's complement arithmetic

Ling, Wing-Kuen and Chan, Albert Yick-Po and Wong, Thomas Pak-Lin and Tam, Peter Kwong-Shun (2002) Autonomous response of a third-order digital filter with two’s complement arithmetic realized in parallel form. Communications in Information and Systems, 2 (4). pp. 435-454. ISSN 1526-7555

diode

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

edge detection

Ling, Bingo Wing-Kuen and Tam, Kwong-Shun (2002) Edge detection via fuzzy switch. SPIE International Technical Group Newsletter, 12 (2). p. 2. ISSN UNSPECIFIED

Ling, Wing-Kuen and Tam, Peter Kwong-Shun (2002) Edge detection using fuzzy switch. In: Image Processing: Algorithms and Systems, 21-23 January 2002, San Jose, California USA.

edge map

Ling, Wing-Kuen and Tam, Kwong-Shun (2002) Closed boundary extraction of cancer cells using fuzzy edge linking technique. In: SPIE Symposium-Image Processing: Algorithms and Systems, January 2002, San Jose.

electric vehicle

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th , Vancouver, Canada.

electrochemistry

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

erosion

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

extended kalman filter

Bhangu, B. and Bingham, Chris and Coles, J. and Williams, C. (2002) EKFs and other nonlinear state estimation techniques for sensorless control of automotive PMSMs. In: Speedam Conference 2002, 11-14 June 2002, Ravello, Italy.

finite element modelling

Mitchell, J. K. and Jewell, G. J. and Wang, J. and Bingham, Chris and Howe, David (2002) Influence of an aperture on the performance of a two-degree-of-freedom iron-cored spherical permanent-magnet actuator. IEEE Transactions on Magnetics, 38 (6). pp. 3650-3653. ISSN 0018-9464

fluorescence

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

forming

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

fuzzy edge detection module

Ling, Wing-Kuen and Tam, Kwong-Shun (2002) Closed boundary extraction of cancer cells using fuzzy edge linking technique. In: SPIE Symposium-Image Processing: Algorithms and Systems, January 2002, San Jose.

fuzzy edge linking module

Ling, Wing-Kuen and Tam, Kwong-Shun (2002) Closed boundary extraction of cancer cells using fuzzy edge linking technique. In: SPIE Symposium-Image Processing: Algorithms and Systems, January 2002, San Jose.

fuzzy membership matrix

Ling, Wing-Kuen and Tam, Kwong-Shun (2002) Closed boundary extraction of cancer cells using fuzzy edge linking technique. In: SPIE Symposium-Image Processing: Algorithms and Systems, January 2002, San Jose.

fuzzy switch

Ling, Bingo Wing-Kuen and Tam, Kwong-Shun (2002) Edge detection via fuzzy switch. SPIE International Technical Group Newsletter, 12 (2). p. 2. ISSN UNSPECIFIED

Ling, Wing-Kuen and Tam, Peter Kwong-Shun (2002) Edge detection using fuzzy switch. In: Image Processing: Algorithms and Systems, 21-23 January 2002, San Jose, California USA.

grout

Lawrence, Jonathan and Minami, Kanaka and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material. Applied Surface Science, 186 (1-4). pp. 162-165. ISSN 0169-4332

grout characteristics

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

grout sealing

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

harmonic distortion

Mosely, I. and Mellor, P. H. and Bingham, Chris (2002) Effect of dead time on harmonic distortion in class-D audio power amplifiers. IEE Electronics Letters , 35 (12). pp. 950-952. ISSN 0013-5194

high power diode laser (HPDL)

Lawrence, Jonathan (2002) On the potential role of the high power diode laser in modern dentistry. Independent Dentistry, 3 (1). pp. 34-36. ISSN 1466-0679

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2002) On the mechanisms of wetting characteristics modification for selected metallic materials by means of high power diode laser radiation. Journal of laser applications, 14 (2). pp. 107-113. ISSN 1042-346X

laser

Lawrence, Jonathan (2002) On the potential role of the high power diode laser in modern dentistry. Independent Dentistry, 3 (1). pp. 34-36. ISSN 1466-0679

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

Lawrence, Jonathan and Minami, Kanaka and Li, Lin and Edwards, Roger E. and Gale, Andrew W. (2002) Determination of the absorption length of CO2, Nd:YAG and high power diode laser radiation for a selected grouting material. Applied Surface Science, 186 (1-4). pp. 162-165. ISSN 0169-4332

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

laser materials processing

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

melting

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

metal

Lawrence, Jonathan and Li, Lin (2002) On the mechanisms of wetting characteristics modification for selected metallic materials by means of high power diode laser radiation. Journal of laser applications, 14 (2). pp. 107-113. ISSN 1042-346X

mild steel

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

molybdenum

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

multivariable control

Musgrave, D. and Bingham, Chris and Stone, D. A. and Howe, D. (2002) Modelling and multivariable control of a gearless, electrically actuated vibratory system. Electric Power Applications, IEE Proceedings - , 147 (5). pp. 345-352. ISSN 1350-2352

oxidation

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

parallel

Ling, Wing-Kuen and Chan, Albert Yick-Po and Wong, Thomas Pak-Lin and Tam, Peter Kwong-Shun (2002) Autonomous response of a third-order digital filter with two’s complement arithmetic realized in parallel form. Communications in Information and Systems, 2 (4). pp. 435-454. ISSN 1526-7555

permanent magnet actuators

Mitchell, J. K. and Jewell, G. J. and Wang, J. and Bingham, Chris and Howe, David (2002) Influence of an aperture on the performance of a two-degree-of-freedom iron-cored spherical permanent-magnet actuator. IEEE Transactions on Magnetics, 38 (6). pp. 3650-3653. ISSN 0018-9464

platinum

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

refractory

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

regenerative braking

Schofield, N. and Bingham, Chris and Howe, D. (2002) Regenerative braking for all-electric and hybrid electric vehicles. In: IMechE Braking 2002 Conference, 2002, Leeds, UK.

resonant converter

Foster, M. P. and Sewell, H. I. and Bingham, Chris and Stone, D. A. (2002) State-variable modelling of LCC voltage-output resonant converters. Electronics Letters , 37 (17). pp. 1065-1066. ISSN 0013-5194

sealing system

Lawrence, Jonathan and Schmidt, M. J. J. and Li, L. and Edwards, R. E. and Gale, A. W. (2002) A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects. In: Recent Research Developments in Materials Science & Engineering. Transworld Research Network, India, pp. 41-67. ISBN 9788178950570

sheet

Lawrence, Jonathan (2002) A comparative investigation of the efficacy of CO2 and high power diode lasers for the forming of EN3 mild steel sheets. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 216 (11). pp. 1481-1491. ISSN 0954-4054

surface energy

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

surface glazing

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

surface treatment

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

third order

Ling, Wing-Kuen and Chan, Albert Yick-Po and Wong, Thomas Pak-Lin and Tam, Peter Kwong-Shun (2002) Autonomous response of a third-order digital filter with two’s complement arithmetic realized in parallel form. Communications in Information and Systems, 2 (4). pp. 435-454. ISSN 1526-7555

transmission electron microscopy

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, Jun and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and solid-state letters, 5 (1). A5-A9. ISSN 1099-0062

Crabb, E. M. and Ravikumar, M. K. and Qian, Y. and Russell, A. E. and Maniguet, S. and Yao, J. and Thompsett, D. and Hurford, M. and Ball, S. C. (2002) Controlled modification of carbon supported platinum electrocatalysts by Mo. Electrochemical and Solid State Letters, 5 (1). A5-A9 . ISSN 1099-0062

vitrification

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

wear life characteristics

Lawrence, Jonathan and Li , Lin (2002) Surface treatment of an Al2O3-based refractory with CO2 and high power diode lasers for improved mechanical and chemical resistance characteristics. Surface and Coatings Technology, 162 (1). pp. 93-100. ISSN 0257-8972

wettability

Lawrence, Jonathan (2002) On the predominant mechanisms active during the high power diode laser modification of the wettability characteristics of an SiO2/Al2O3-based ceramic material. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 458 (2026). pp. 2445-2463. ISSN 1364-5021

Lawrence, Jonathan and Li, Lin (2002) On the mechanisms of wetting characteristics modification for selected metallic materials by means of high power diode laser radiation. Journal of laser applications, 14 (2). pp. 107-113. ISSN 1042-346X

This list was generated on Thu Apr 24 07:34:54 2014 BST.