Items where Division is "College of Science > School of Engineering" and Year is 2000

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Keywords | Item Type | No Grouping
Accelerometers Active magnetic bearings Adaptive control systems Adaptive filtering Algorithms Automotive CO2 laser Codes (symbols) Computational complexity Computer aided engineering Computer simulation Concrete Control laws Convergence of numerical methods Correlation methods Current Vector Control Degrees of freedom (mechanics) Discrete time control systems Error analysis Feedback control Finite automata High power diode laser (HPDL) Infinite time control Interfaces (computer) Kalman filtering Learning algorithms Learning systems Life characteristics Linear control systems Mathematical models Mechatronics, Complex cosimulation, Electric vehicles Model Reference control Model reference control Motion control Mutivariable control Nd:YAG laser Neural networks Nonlinear filtering Optimization, Stochastic learning automata, Genetic algorithms Ordinary Portland cement (OPC) PID controllers, Automata theory Parameter estimation Parameter tuning Permanent Magnet AC Motor Problem solving Reinforcement learning techniques, Optimal control systems Riccati equations, Bellman equations Sensors State estimation State feedback Surface glazing Three term control systems, Continuous action reinforcement learning automata (CARLA) Vehicle handling dynamics, Dynamics Vehicles, State observers Vibration control, Deflection control, Vehicle suspensions Wear absorption alumina cement ceramic concrete constitutional supercooling contact angle enamel excimer laser gas glaze glazing high power diode laser high power diode laser (HPDL) induction heater laser linear actuators magnetic bearings melting microstructure permanent magnet synchronous motor phase properties rapid solidification refractory robust stabilisation silica solidification steel surface surface energy surface glazing surface roughness vibration control vitreous enamel vitrification wettability
Number of items: 133.

Accelerometers

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Active magnetic bearings

Wu, Z. Y. and Bingham, Chris and Howe, D. and Peel, D. (2000) QFT for the design of active magnetic bearing control systems. In: 2000 International Symposium on Magnetic Bearings, 23-25 August 2000, Martigny, Switzerland.

Adaptive control systems

Howell, M. N. and Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Adaptive filtering

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Algorithms

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Automotive

Stewart, Paul and Kadirkamanathan, V. K. (2000) Position estimation for the PMAC motor in automotive drive applications. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

CO2 laser

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Codes (symbols)

Veitl, A. and Gordon, T. and Van De Sand, A. and Howell, M. and Valasek, M. and Vaculin, O. and Steinbauer, P. (2000) Methodologies for coupling simulation models and codes in mechatronic system analysis and design. Vehicle System Dynamics, 33 (SUPPL.). pp. 231-243. ISSN 0042-3114

Computational complexity

Veitl, A. and Gordon, T. and Van De Sand, A. and Howell, M. and Valasek, M. and Vaculin, O. and Steinbauer, P. (2000) Methodologies for coupling simulation models and codes in mechatronic system analysis and design. Vehicle System Dynamics, 33 (SUPPL.). pp. 231-243. ISSN 0042-3114

Computer aided engineering

Veitl, A. and Gordon, T. and Van De Sand, A. and Howell, M. and Valasek, M. and Vaculin, O. and Steinbauer, P. (2000) Methodologies for coupling simulation models and codes in mechatronic system analysis and design. Vehicle System Dynamics, 33 (SUPPL.). pp. 231-243. ISSN 0042-3114

Computer simulation

Howell, M. N. and Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Veitl, A. and Gordon, T. and Van De Sand, A. and Howell, M. and Valasek, M. and Vaculin, O. and Steinbauer, P. (2000) Methodologies for coupling simulation models and codes in mechatronic system analysis and design. Vehicle System Dynamics, 33 (SUPPL.). pp. 231-243. ISSN 0042-3114

Concrete

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Control laws

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Convergence of numerical methods

Howell, M. N. and Gordon, Timothy (2000) On the genetic adaptation of stochastic learning automata. In: IEEE Conference on Evolutionary Computation, ICEC, 16 - 19 July 2000, La Jolla, CA, USA.

Correlation methods

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Current Vector Control

Stewart, Paul and Kadirkamanathan, Visakan (2000) Dynamic model reference control of a PMAC motor for automotive traction drives. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

Degrees of freedom (mechanics)

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Discrete time control systems

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Error analysis

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Howell, M. N. and Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Feedback control

Fairgrieve, A. and Gordon, Timothy (2000) On-line estimation of local road gradient for improved steady state suspension deflection control. In: 16th IAVSD Symposium: 'The Dynamics of Vehicles on Roads and on Tracks', 30 August - 3 September 1999, Pretoria, South Africa.

Finite automata

Howell, M. N. and Gordon, Timothy (2000) On the genetic adaptation of stochastic learning automata. In: IEEE Conference on Evolutionary Computation, ICEC, 16 - 19 July 2000, La Jolla, CA, USA.

High power diode laser (HPDL)

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Infinite time control

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Interfaces (computer)

Veitl, A. and Gordon, T. and Van De Sand, A. and Howell, M. and Valasek, M. and Vaculin, O. and Steinbauer, P. (2000) Methodologies for coupling simulation models and codes in mechatronic system analysis and design. Vehicle System Dynamics, 33 (SUPPL.). pp. 231-243. ISSN 0042-3114

Kalman filtering

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Fairgrieve, A. and Gordon, Timothy (2000) On-line estimation of local road gradient for improved steady state suspension deflection control. In: 16th IAVSD Symposium: 'The Dynamics of Vehicles on Roads and on Tracks', 30 August - 3 September 1999, Pretoria, South Africa.

Learning algorithms

Howell, M. N. and Gordon, Timothy (2000) On the genetic adaptation of stochastic learning automata. In: IEEE Conference on Evolutionary Computation, ICEC, 16 - 19 July 2000, La Jolla, CA, USA.

Learning systems

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Howell, M. N. and Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Life characteristics

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Linear control systems

Fairgrieve, A. and Gordon, Timothy (2000) On-line estimation of local road gradient for improved steady state suspension deflection control. In: 16th IAVSD Symposium: 'The Dynamics of Vehicles on Roads and on Tracks', 30 August - 3 September 1999, Pretoria, South Africa.

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Mathematical models

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Veitl, A. and Gordon, T. and Van De Sand, A. and Howell, M. and Valasek, M. and Vaculin, O. and Steinbauer, P. (2000) Methodologies for coupling simulation models and codes in mechatronic system analysis and design. Vehicle System Dynamics, 33 (SUPPL.). pp. 231-243. ISSN 0042-3114

Mechatronics, Complex cosimulation, Electric vehicles

Veitl, A. and Gordon, T. and Van De Sand, A. and Howell, M. and Valasek, M. and Vaculin, O. and Steinbauer, P. (2000) Methodologies for coupling simulation models and codes in mechatronic system analysis and design. Vehicle System Dynamics, 33 (SUPPL.). pp. 231-243. ISSN 0042-3114

Model Reference control

Stewart, Paul and Kadirkamanathan, V. K. (2000) Position estimation for the PMAC motor in automotive drive applications. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

Model reference control

Stewart, Paul and Kadirkamanathan, Visakan (2000) Dynamic model reference control of a PMAC motor for automotive traction drives. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

Motion control

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Mutivariable control

Stewart, Paul and Kadirkamanathan, V. K. (2000) Position estimation for the PMAC motor in automotive drive applications. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

Nd:YAG laser

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Neural networks

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Nonlinear filtering

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Optimization, Stochastic learning automata, Genetic algorithms

Howell, M. N. and Gordon, Timothy (2000) On the genetic adaptation of stochastic learning automata. In: IEEE Conference on Evolutionary Computation, ICEC, 16 - 19 July 2000, La Jolla, CA, USA.

Ordinary Portland cement (OPC)

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

PID controllers, Automata theory

Howell, M. N. and Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Parameter estimation

Howell, M. N. and Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Parameter tuning

Howell, M. N. and Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Permanent Magnet AC Motor

Stewart, Paul and Kadirkamanathan, Visakan (2000) Dynamic model reference control of a PMAC motor for automotive traction drives. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

Problem solving

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Reinforcement learning techniques, Optimal control systems

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Riccati equations, Bellman equations

Howell, M. N. and Gordon, Timothy (2000) Associative reinforcement learning for discrete-time optimal control. IEE Colloquium (Digest) (69). pp. 1-4. ISSN 0963-3308

Sensors

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

State estimation

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Stewart, Paul and Kadirkamanathan, V. K. (2000) Position estimation for the PMAC motor in automotive drive applications. In: UKACC International Conference on control 2000, September 4-7, 2000, University of Cambridge UK.

State feedback

Fairgrieve, A. and Gordon, Timothy (2000) On-line estimation of local road gradient for improved steady state suspension deflection control. In: 16th IAVSD Symposium: 'The Dynamics of Vehicles on Roads and on Tracks', 30 August - 3 September 1999, Pretoria, South Africa.

Surface glazing

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

Three term control systems, Continuous action reinforcement learning automata (CARLA)

Howell, M. N. and Gordon, Timothy and Best, M. C. (2000) The application of continuous action reinforcement learning automata to adaptive PID tuning. IEE Colloquium (Digest) (69). pp. 5-8. ISSN 0963-3308

Vehicle handling dynamics, Dynamics

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Vehicles, State observers

Best, M. C. and Gordon, T. J. and Dixon, P. J. (2000) Extended adaptive Kalman filter for real-time state estimation of vehicle handling dynamics. Vehicle System Dynamics, 34 (1). pp. 57-75. ISSN 0042-3114

Vibration control, Deflection control, Vehicle suspensions

Fairgrieve, A. and Gordon, Timothy (2000) On-line estimation of local road gradient for improved steady state suspension deflection control. In: 16th IAVSD Symposium: 'The Dynamics of Vehicles on Roads and on Tracks', 30 August - 3 September 1999, Pretoria, South Africa.

Wear

Lawrence, Jonathan and Li, Lin (2000) The wear characteristics of a high power diode laser generated glaze on the ordinary Portland cement surface of concrete. Wear, 246 (1-2). pp. 91-97. ISSN 0043-1648

absorption

Lawrence, Jonathan and Johnston, Emma P. and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement. Journal of Physics D: Applied Physics, 33 (8). pp. 945-947. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

alumina

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

cement

Lawrence, Jonathan and Johnston, Emma P. and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement. Journal of Physics D: Applied Physics, 33 (8). pp. 945-947. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

ceramic

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

concrete

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

constitutional supercooling

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

contact angle

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

enamel

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

excimer laser

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

gas

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

glaze

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

glazing

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

high power diode laser

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

high power diode laser (HPDL)

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) High power diode laser surface glazing of concrete. Journal of Laser Applications, 12 (3). pp. 116-125. ISSN 1042-346X

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) The influence of shield gases on the surface condition of laser treated concrete. Applied Surface Science, 168 (1-4). pp. 25-28. ISSN 0169-4332

induction heater

Sewell, H. I. and Stone, D. A. and Bingham, Chris (2000) Novel, three phase, unity power factor modular induction heater. Electric Power Applications, IEE Proceedings - , 147 (5). pp. 371-378. ISSN 1350-2352

laser

Lawrence, Jonathan and Johnston, Emma P. and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement. Journal of Physics D: Applied Physics, 33 (8). pp. 945-947. ISSN 0022-3727

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

linear actuators

Jakeman, N. and Mellor, P. H. and Bullough, W. A. and Bingham, Chris (2000) High performance linear actuators for demanding textile applications. In: MECHATRONICS 2000. Seventh Mechatronics Forum International Conference and Mechatronics Education Workshop, 2000, Atlanta, USA.

magnetic bearings

Duan, G R and Wu, Z Y and Bingham, Chris and Howe, D (2000) Robust magnetic bearing control using stabilizing dynamical compensators. IEEE Transactions on Industry Applications, 36 (6). pp. 1654-1660. ISSN 0093-9994

melting

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

microstructure

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

permanent magnet synchronous motor

Bingham, Chris and Stone, D A and Schofield, N and Howe, D and Peel, D (2000) Amplitude and frequency control of a vibratory pile driver. IEEE Transactions on Industrial Electronics, 47 (3). pp. 623-631. ISSN 0278-0046

phase

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

properties

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

rapid solidification

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

refractory

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

robust stabilisation

Duan, G R and Wu, Z Y and Bingham, Chris and Howe, D (2000) Robust magnetic bearing control using stabilizing dynamical compensators. IEEE Transactions on Industry Applications, 36 (6). pp. 1654-1660. ISSN 0093-9994

silica

Lawrence, Jonathan and Li, Lin (2000) Determination of the absorption length of CO2 and high power diode laser radiation for a high volume alumina-based refractory material. Applied Surface Science, 168 (1-4). pp. 71-74. ISSN 0169-4332

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

solidification

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

steel

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

surface

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

surface energy

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

surface glazing

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part I: glaze characteristics. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 284 (1-2). pp. 93-102. ISSN 0921-5093

Lawrence, Jonathan and Li, Lin (2000) A comparative study of the surface glaze characteristics of concrete treated with CO2 and high power diode lasers. Part II: mechanical, chemical and physical properties. Materials Science & Engineering A. Structural Materials: Properties, Microstructure and Processing, 287 (1). pp. 25-29. ISSN 0921-5093

surface roughness

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

vibration control

Bingham, Chris and Stone, D A and Schofield, N and Howe, D and Peel, D (2000) Amplitude and frequency control of a vibratory pile driver. IEEE Transactions on Industrial Electronics, 47 (3). pp. 623-631. ISSN 0278-0046

vitreous enamel

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

vitrification

Lawrence, Jonathan and Li, Lin (2000) Determination of absorption length of CO2 and high power diode laser radiation for ordinary Portland cement and its influence on the depth of melting. Optics & Laser Technology, 32 (1). pp. 11-14. ISSN 0030-3992

wettability

Lawrence, Jonathan and Li, Lin (2000) Carbon steel wettability characteristics enhancement for improved enamelling using a 1.2 kW high power diode laser. Optics and Lasers in Engineering, 32 (4). pp. 353-365. ISSN 0143-8166

Lawrence, Jonathan and Li, Lin (2000) Effect of laser induced rapid solidification structures on adhesion and bonding characteristics of alumina/silica based oxide to vitreous enamel. Materials Science and Technology, 16 (2). pp. 220-226. ISSN 0267–0836

Lawrence, Jonathan and Li, Lin (2000) Finite element analysis of temperature distribution using ABAQUS for a laser based tile grout sealing process. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 214 (6). pp. 451-461. ISSN 0954-4054

Lawrence, Jonathan and Li, Lin (2000) Wettability characteristics of carbon steel modified with CO2, Nd:YAG, Excimer and high power diode lasers. Applied Surface Science, 154-15 . pp. 664-669. ISSN 0169-4332

This list was generated on Fri Nov 28 16:36:33 2014 GMT.