2022

Aliyu, Aliyu, Elnokaly, Amira, Elseragy, Ahmed, Peng, Jun and Ahmed, Waqar (2022) Effect of Ventilation on Aerosol Transmission in an Indoor Seminar Room in Lincoln, UK. In: 9th ZEMCH (Zero Energy Mass Custom Homes) International Conference.

2020

Hussein, Nozad, Omer, Huner, Ismael, Ava, Alhnan, Mohamed Albed, Elhissi, Abdelbary and Ahmed, Waqar (2020) Spray-Dried Alginate Microparticles for Potential Intranasal Delivery of Ropinirole Hydrochloride: Development, Characterization and Histopathological Evaluation. Pharmaceutical Development and Technology, 25 (3). pp. 290-299. ISSN 1083-7450

2019

Nourafkan, Ehsan, Gardy, Jabbar, Asachi, Maryam, Ahmed, Waqar and Wen, Dongsheng (2019) Nanoparticle Formation in Stable Microemulsions for Enhanced Oil Recovery Application. Industrial & Engineering Chemistry Research, 58 (28). pp. 12664-12677. ISSN 0888-5885

Zhang, Mengtian, Wang, Qin, Wan, Ka-Wai, Ahmed, Waqar, Phoenix, David, Zhang, Zhirong, Elrayess, Mohamed A, Elhissi, Abdelbary and Sun, Xun (2019) Liposome Mediated-CYP1A1 Gene Silencing Nanomedicine Prepared Using Lipid Film-Coated Proliposomes as a Potential Treatment Strategy of Lung Cancer. International Journal of Pharmaceutics, 566 . pp. 185-193. ISSN 0378-5173

2018

Khan, Iftikhar, Yousaf, Sakib, Subramanian, Sneha, Albed Alhnan, Mohamed, Ahmed, Waqar and Elhissi, Abdelbary (2018) Proliposome tablets manufactured using a slurry-driven lipid-enriched powders: development, characterization and stability evaluation. International Journal of Pharmaceutics . ISSN 0378-5173

Ahmed, Waqar, Khan, Iftikhar, Yousaf, Sakib, Subramanian, Sneha, Albed Alhnan, Mohamed and Elhissi, Abdelbary (2018) Proliposome Powders for the Generation of Liposomes: the Influence of Carbohydrate Carrier and Separation Conditions on Crystallinity and Entrapment of a Model Antiasthma Steroid. AAPS PharmSciTech . ISSN 1530-9932

Sadia, Muzna, Arafat, Basel, Ahmed, Waqar, Forbes, Robert E. and Alhnan, Mohamed A. (2018) Channelled tablets: an innovative approach to accelerating drug release from 3D printed tablets. Journal of Controlled Release, 269 . pp. 355-363. ISSN 0168-3659

Najlah, M., Jain, M., Wan, K.-W., Ahmed, W., Albed Alhnan, M., Phoenix, D. A., Taylor, K. M. G. and Elhissi, A. (2018) Ethanol-based proliposome delivery systems of paclitaxel for in vitro application against brain cancer cells. Journal of Liposome Research, 28 (1). pp. 74-85. ISSN 0898-2104

2017

Roccatano, Danilo (2017) A short introduction to the molecular dynamics simulation of nanomaterials. In: Micro and nanomanufacturing. Springer Nature, pp. 123-155. ISBN 9783319671307, 9783319671321

2016

Azzawi, M., Seifalian, A. and Ahmed, W. (2016) Nanotechnology for the diagnosis and treatment of diseases. Nanomedicine, 11 (16). pp. 2025-2027. ISSN 1743-5889

Najlah, M., Kadam, A., Wan, K.-W., Ahmed, W., Taylor, K. M. G. and Elhissi, A. M. A. (2016) Novel paclitaxel formulations solubilized by parenteral nutrition nanoemulsions for application against glioma cell lines. International Journal of Pharmaceutics, 506 (1-2). pp. 102-109. ISSN 0378-5173

Byrne, J. A., Okpalugo, T., Ahmed, W. and Jackson, M. J. (2016) Applications of carbon nanotubes in bio-nanotechnology. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 379-408. ISBN 9783319334899, 9783319334875

Jackson, M. J., Novakov, T., da Silva, M. B., Handy, R., Robinson, G., Whitfield, M., Morrell, J. and Ahmed, W. (2016) Atomic scale machining of medical materials. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 1-54. ISBN 9783319334899, 9783319334875

Ali, N., Kousa, Y., Gracio, J., Cabral, G., Sousa, A., Shokufar, T., Titus, E., Madaleno, J. C., Ahmed, W. and Jackson, M. J. (2016) Biomaterial-cell tissue interactions in surface engineered carbon-based biomedical implants and devices. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 303-378. ISBN 9783319334899, 9783319334875

Ahmed, I., Javeed, A., Ahmed, W., Phoenix, D. A., Elhissi, A. and Jackson, M. J. (2016) Delivery of anticancer molecules using carbon nanotubes. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 563-572. ISBN 9783319334899, 9783319334875

Sein, H., Maryan, C., Jones, A., Verran, J., Ali, N., Hassan, I. U., Rego, C., Ahmed, W. and Jackson, M. . (2016) Dental tool technology. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 195-224. ISBN 9783319334899, 9783319334875

Khan, I., Yousaf, S., Alhnan, M. A., Ahmed, W., Elhissi, A. and Jackson, M. J. (2016) Design characteristics of inhaler devices used for pulmonary delivery of medical aerosols. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 573-592. ISBN 9783319334899, 9783319334875

Sein, H., Maryan, C., Jones, A., Verran, J., Ali, N., Hassan, I. U., Rego, C., Ahmed, W and Jackson, M. J. (2016) Diamond surgical tools. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 149-194. ISBN 9783319334899, 9783319334875

Jackson, M. J., Whitfield, M., Robinson, G. M., Handy, R. and Ahmed, W. (2016) Machining cancellous bone prior to prosthetic implantation. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 439-474. ISBN 9783319334899, 9783319334875

Ahmed, Waqar and Jackson, Mark J. (2016) Micro and nanomanufacturing: volume II. Springer International Publishing, pp. 1-691. ISBN 9783319671307, 9783319671321

Wain, R. A. J., Hammond, D., McPhillips, M., Whitty, J. P. M. and Ahmed, W. (2016) Microvascular anastomoses: suture and non-suture methods. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 545-562. ISBN 9783319334899, 9783319334875

Ahmed, W., AlHannan, M., Yusuf, S. and Jackson, M. J. (2016) Nanocoatings for medical devices. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 519-544. ISBN 9783319334899, 9783319334875

Sein, H., Maryan, C., Jones, A., Verran, J., Ali, N., Hassan, I. U., Rego, C., Ahmed, W. and Jackson, M. J. (2016) Nanocrystalline diamond: deposition routes and clinical applications. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 225-248. ISBN 9783319334899, 9783319334875

Ahmed, Waqar and Jackson, Mark J. (2016) Preface. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, vii-viii. ISBN 9783319334899, 9783319334875

Ali, N., Kousa, Y., Gracio, J., Cabral, G., Sousa, A., Shokufar, T., Titus, E., Madaleno, J. C., Ahmed, W. and Jackson, M. J. (2016) Surface engineering of artificial heart valves to using modified diamond-like coatings. In: Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 117-148. ISBN 9783319334899, 9783319334875

Ahmed, Waqar and Jackson, Mark J. (2016) Surgical tools and medical devices [2nd ed.]. Springer International Publishing, pp. 1-691. ISBN 9783319334899, 9783319334875

Subramanian, S., Khan, I., Korale, O., Alhnan, M. A., Ahmed, W., Najlah, M., Taylor, K. M. G. and Elhissi, A. (2016) A simple approach to predict the stability of phospholipid vesicles to nebulization without performing aerosolization studies. International Journal of Pharmaceutics, 502 (1-2). pp. 18-27. ISSN 0378-5173

Jackson, M. J., Whitfield, M. D., Robinson, G. M., Morrell, J. S. and Ahmed, W. (2016) Diamond nanogrinding. In: Advances in nanomaterials. Advanced Structured Materials, 79 . Springer Verlag, pp. 247-297. ISBN 9788132226666

2015

Khan, I., Yousaf, S., Subramanian, S., Korale, O., Alhnan, M. A., Ahmed, W., Taylor, K. M. G. and Elhissi, A. (2015) Proliposome powders prepared using a slurry method for the generation of beclometasone dipropionate liposomes. International Journal of Pharmaceutics, 496 (2). pp. 342-350. ISSN 0378-5173

Jackson, M. J., Whitfield, M. D., Robinson, G. M., Handy, R. G., Morrell, J. S., Ahmed, W. and Sein, H. (2015) Analysis of contact of chip and tool using nanostructured coated cutting tools. In: Machining with nanomaterials. Springer International Publishing, pp. 155-175. ISBN 9783319190099, 9783319190082

Jackson, M. J., Whitfield, M. D., Robinson, G. M., Handy, R. G., Morrell, J. S., Davim, J. P., Ahmed, W. and Sein, H. (2015) Fundamentals of machining. In: Machining with nanomaterials. Springer International Publishing, pp. 1-35. ISBN 9783319190099, 9783319190082

Jackson, M. J., Whitfield, M. D., Robinson, G. M., Cabral, G., Reis, P., Titus, E., Madaleno, J. C., Davim, J. P., Gracio, J., Ahmed, W. and Sein, H. (2015) Machining of brittle materials using nanostructured diamond tools. In: Machining with nanomaterials. Springer International Publishing, pp. 129-153. ISBN 9783319190099, 9783319190082

Jackson, M. J., Whitfield, M. D., Robinson, G. M., Handy, R. G., Ahmed, W., Sein, H. and Morrell, J. S. (2015) Manufacture and development of nanostructured diamond tools. In: Machining with nanomaterials. Springer International Publishing, pp. 273-298. ISBN 9783319190099, 9783319190082

Jackson, M. J., Whitfield, M. D., Robinson, G. M., Handy, R. G., Morrell, J. S., Ahmed, W. and Sein, H. (2015) Micromachining from a materials perspective. In: Machining with nanomaterials. Springer International Publishing, pp. 77-127. ISBN 9783319190099, 9783319190082

Xu, H., Fan, M., Elhissi, A. M. A., Zhang, Z., Wan, K.-W., Ahmed, W., Phoenix, D. A. and Sun, X. (2015) PEGylated graphene oxide for tumor-targeted delivery of paclitaxel. Nanomedicine, 10 (8). pp. 1247-1262. ISSN 1743-5889

Ahmed, M. H., Byrne, J. A. and Ahmed, W. (2015) Characteristic of silicon doped diamond like carbon thin films on surface properties and human serum albumin adsorption. Diamond and Related Materials, 55 . pp. 108-116. ISSN 0925-9635

Najlah, M., Hidayat, K., Omer, H. K., Mwesigwa, E., Ahmed, W., AlObaidy, K. G., Phoenix, D. A. and Elhissi, A. (2015) A facile approach to manufacturing non-ionic surfactant nanodipsersions using proniosome technology and high-pressure homogenization. Journal of Liposome Research, 25 (1). pp. 32-37. ISSN 0898-2104

2014

Jackson, Mark J., Handy, Rodney G., Whitfield, Michael D., Burgess, John W., Robinson, Grant M., Novakov, Tamara, Ahmed, Waqar, Elhissi, Ahmed M., Crean, St John J., Phoenix, David A., Machado, Alisson Rocha and da Silva, Marcio Bacci (2014) Machining medical grade titanium alloys using nonabrasive nanolayered cutting tools. In: Anti-abrasive nanocoatings: current and future applications. Elsevier, pp. 225-248. ISBN 9780857092175, 9780857092113

Kadam, A. N., Najlah, M., Wan, K.-W., Ahmed, W., Crean, S. J., Phoenix, D. A., Taylor, K. M. G. and Elhissi, A. M. A. (2014) Stability of parenteral nanoemulsions loaded with paclitaxel: the influence of lipid phase composition, drug concentration and storage temperature. Pharmaceutical Development and Technology, 19 (8). pp. 999-1004. ISSN 1083-7450

Elhissi, A. M., Dennison, S. R., Ahmed, W., Taylor, K. M. and Phoenix, D. A. (2014) New delivery systems-liposomes for pulmonary delivery of antibacterial drugs. In: Novel antimicrobial agents and strategies. Wiley Blackwell, pp. 387-406. ISBN 9783527676132, 9783527336388

Jackson, M. J., Whitfield, M. D., Robinson, G. M., Ahmed, W. and Morrell, J. S. (2014) Analysis of the effects of micromachining using nanostructured cutting tools. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 319-342. ISBN 9780323289900, 9780323296434

Jackson, M. J., Ahmed, W., Whitt, M., Handy, R., Robinson, G. M., Whitfield, M. D. and Morrell, J. S. (2014) Commercialization of nanotechnologies: technology transfer from university research laboratories. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 270-278. ISBN 9780323289900, 9780323296434

Ahmed, W. and Jackson, M. J. (2014) Emerging nanotechnologies for manufacturing. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 1-10. ISBN 9780323289900, 9780323296434

Jackson, M. J., Robinson, G. M., Whitfield, M. D., Ahmed, W. and Morrell, J. S. (2014) Micro- and nanomachining. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 202-229. ISBN 9780323289900, 9780323296434

Yousaf, S., Alhnan, M. A., Abdallah, A., Abdallah, B., Khan, I. and Ahmed, W. (2014) Nanocoatings in medicine: antiquity and modern times. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies . Elsevier Science, pp. 418-443. ISBN 9780323289900, 9780323296434

Ahmed, W., Jackson, M. J. and Ul Hassan, I. (2014) Nanotechnology to nanomanufacturing. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 1-13. ISBN 9780323289900, 9780323296434

Ahmed, W. and Jackson, M. J. (2014) Preface. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, xv. ISBN 9780323289900, 9780323296434

Elhissi, A., Phoenix, D. and Ahmed, W. (2014) Some approaches to large-scale manufacturing of liposomes. In: Emerging nanotechnologies for manufacturing. Micro and Nano Technologies, 2nd ed . Elsevier Science, pp. 402-417. ISBN 9780323289900, 9780323296434

Ahmad, M., Ahmed, E., Ahmed, W., Elhissi, A., Hong, Z. L. and Khalid, N. R. (2014) Enhancing visible light responsive photocatalytic activity by decorating Mn-doped ZnO nanoparticles on graphene. Ceramics International, 40 (7 A). pp. 10085-10097. ISSN 0272-8842

Lal, S., Singhrao, S. K., Bricknell, M., Pearce, M., Morton, L. H. G., Ahmed, W. and Crean, St.J. (2014) Monitoring dental-unit-water-line output water by current in-office test kits. Current Microbiology, 69 (2). pp. 135-142. ISSN 0343-8651

Wain, Richard A. J., Whitty, Justin P. M., Dalal, Milind D., Holmes, Michael C. and Ahmed, Waqar (2014) Blood flow through sutured and coupled microvascular anastomoses: A comparative computational study. Journal of Plastic, Reconstructive and Aesthetic Surgery, 67 (7). pp. 951-959. ISSN 1748-6815

Ullah, Mahtab, Ahmed, Ejaz, Elhissi, Abdelbary and Ahmed, Waqar (2014) Low resistance polycrystalline diamond thin films deposited by hot filament chemical vapour deposition. Bulletin of Materials Science, 37 (3). pp. 579-583. ISSN 0250-4707

Ahmad, M., Ahmed, E., Hong, Z. L., Ahmed, W., Elhissi, A. and Khalid, N. R. (2014) Photocatalytic, sonocatalytic and sonophotocatalytic degradation of Rhodamine B using ZnO/CNTs composites photocatalysts. Ultrasonics Sonochemistry, 21 (2). pp. 761-773. ISSN 1350-4177

Najlah, M., Parveen, I., Alhnan, M. A., Ahmed, W., Faheem, A., Phoenix, D. A., Taylor, K. M. G. and Elhissi, A. (2014) The effects of suspension particle size on the performance of air-jet, ultrasonic and vibrating-mesh nebulisers. International Journal of Pharmaceutics, 461 (1-2). pp. 234-241. ISSN 0378-5173

Ahmad, M., Ahmed, E., Khalid, N. R., Jackson, M. J. and Ahmed, W. (2014) Synthesis and characterization of hexagonal shaped nanocrystalline zinc oxide powders. In: Nanotechnology: concepts, methodologies, tools, and applications. IGI Global, pp. 204-217. ISBN 9781466651265, 1466651253, 9781466651258

Wu, Chengyu, Zhang, Mengtian, Zhang, Zhirong, Wan, Kai-Wai, Ahmed, Waqar, Phoenix, David A., Elhissi, Abdelbary M. and Sun, Xun (2014) Thymopentin nanoparticles engineered with high loading efficiency, improved pharmacokinetic properties, and enhanced immunostimulating effect using soybean phospholipid and PHBHHx polymer. Molecular Pharmaceutics, 11 (10). pp. 3371-3377. ISSN 1543-8384

2013

Ahmad, M., Ahmed, E., Hong, Z. L., Iqbal, Z., Khalid, N. R., Abbas, T., Ahmad, I., Elhissi, A. M. and Ahmed, W. (2013) Structural, optical and photocatalytic properties of hafnium doped zinc oxide nanophotocatalyst. Ceramics International, 39 (8). pp. 8693-8700. ISSN 0272-8842

Najlah, M., Vali, A., Taylor, M., Arafat, B. T., Ahmed, W., Phoenix, D. A., Taylor, K. M. G. and Elhissi, A. (2013) A study of the effects of sodium halides on the performance of air-jet and vibrating-mesh nebulizers. International Journal of Pharmaceutics, 456 (2). pp. 520-527. ISSN 0378-5173

Ahmad, M., Ahmed, E., Hong, Z. L., Khalid, N. R., Ahmed, W. and Elhissi, A. (2013) Graphene-Ag/ZnO nanocomposites as high performance photocatalysts under visible light irradiation. Journal of Alloys and Compounds, 577 . pp. 717-727. ISSN 0925-8388

Ahmad, M., Ahmed, E., Hong, Z. L., Xu, J. F., Khalid, N. R., Elhissi, A. and Ahmed, W. (2013) A facile one-step approach to synthesizing ZnO/graphene composites for enhanced degradation of methylene blue under visible light. Applied Surface Science, 274 . pp. 273-281. ISSN 0169-4332

Ahmed, M. H., Byrne, J. A., McLaughlin, J. A. D., Elhissi, A. and Ahmed, W. (2013) Comparison between FTIR and XPS characterization of amino acid glycine adsorption onto diamond-like carbon (DLC) and silicon doped DLC. Applied Surface Science, 273 . pp. 507-514. ISSN 0169-4332

Elhissi, A., Hidayat, K., Phoenix, D. A., Mwesigwa, E., Crean, S., Ahmed, W., Faheem, A. and Taylor, K. M. G. (2013) Air-jet and vibrating-mesh nebulization of niosomes generated using a particulate-based proniosome technology. International Journal of Pharmaceutics, 444 (1-2). pp. 193-199. ISSN 0378-5173

Khalid, N. R., Ahmed, E., Ikram, M., Ahmad, M., Phoenix, D. A., Elhissi, A., Ahmed, Waqar and Jackson, M. J. (2013) Effects of calcination on structural, photocatalytic properties of TiO 2 nanopowders via TiCl4 hydrolysis. Journal of Materials Engineering and Performance, 22 (2). pp. 371-375. ISSN 1059-9495

Khan, Iftikhar, Elhissi, Abdelbary, Shah, Mahmood, Alhnan, Mohamed Albed and Ahmed, Waqar (2013) Liposome-based carrier systems and devices used for pulmonary drug delivery. In: Biomaterials and medical tribology: research and development. Woodhead series in biomaterials . Elsevier, pp. 395-443. ISBN 9780857090171

Hussein, I., Stasik, A., Wan, K.-W., Ahmed, W., Phoenix, D. A., Ahmed, E., Jackson, M. and Elhissi, A. (2013) Manufacture and characterization of Asiatic acid non-ionic surfactant nanocapsules for anticancer therapy. Journal of Manufacturing Technology Research, 5 (1-2). pp. 1-9. ISSN 1943-8095

Devi, B. R., Phoenix, D. A., Ahmed, W., Crean, S. J., Jackson, M. and Elhissi, A. (2013) Manufacture of Paclitaxel proliposomes: a simple approach to generating anticancer liposomes. Journal of Manufacturing Technology Research, 5 (1-2). pp. 11-16. ISSN 1943-8095

2012

Athar, T., Topnani, N., Hakeem, A. and Ahmed, W. (2012) Synthesis and characterization of MnO 2 and CdO nanoparticles. Advanced Science Letters, 7 . pp. 39-42. ISSN 1936-6612

Athar, T., Hakeem, A. and Ahmed, W. (2012) Synthesis of MgO nanopowder via non aqueous sol-gel method. Advanced Science Letters, 7 . pp. 27-29. ISSN 1936-6612

Athar, T., Ko, T., Lee, I.-M. and Ahmed, W. (2012) Thermal synthesis of tetragonal zirconia nanopowders. Advanced Science Letters, 7 . pp. 35-38. ISSN 1936-6612

Elhissi, A.a, Ahmed, Waqar, Dhanak, V.R.c and Subramani, K.d (2012) Carbon Nanotubes in Cancer Therapy and Drug Delivery. Elsevier Inc., pp. 347-363. ISBN 9781455778621

Ahmed, M.H.a, Byrne, J.A.a, Keyes, T.E.b, Ahmed, Waqar, Elhissi, A.c, Jackson, M.J.c and Ahmed, E.d (2012) Characteristics and applications of titanium oxide as a biomaterial for medical implants. Elsevier Ltd, pp. 1-57. ISBN 9781907568725

Subramani, K.a and Ahmed, Waqar (2012) Emerging Nanotechnologies in Dentistry. Elsevier Inc.. ISBN 9781455778621

Subramani, K.a and Ahmed, Waqar (2012) Fabrication of PEG Hydrogel Micropatterns by Soft-Photolithography and PEG Hydrogel as Guided Bone Regeneration Membrane in Dental Implantology. Elsevier Inc., pp. 171-187. ISBN 9781455778621

Ahmed, Waqar, Elhissi, A.a and Subramani, K.b (2012) Introduction to Nanotechnology. Elsevier Inc., pp. 3-16. ISBN 9781455731275

Subramani, K.a, Ahmed, Waqar and Hartsfield, J.K.a (2012) Nanobiomaterials in Clinical Dentistry. Elsevier Inc., pp. 1-519. ISBN 9781455731275

Subramani, K.a and Ahmed, Waqar (2012) Nanoparticulate Drug Delivery Systems for Oral Cancer Treatment. Elsevier Inc., pp. 333-345. ISBN 9781455778621

Subramani, K. and Ahmed, Waqar (2012) Nanotechnology and the future of dentistry. In: Emerging nanotechnologies in dentistry: processes, materials and applications. Micro and nano technologies . William Andrew/Elsevier, pp. 1-14. ISBN 9781455778621

Ahmed, Waqar, Elhissi, A.a, Jackson, M.J.a and Ahmed, E.b (2012) Precision machining of medical devices. Elsevier Ltd, pp. 59-113. ISBN 9781907568725

Subramani, K.a and Ahmed, Waqar (2012) Self-Assembly of Proteins and Peptides and Their Applications in Bionanotechnology and Dentistry. Elsevier Inc., pp. 209-224. ISBN 9781455778621

Ahmed, Waqar, Sein, H.b, Jackson, M.c, Rego, C.b, Hassan, I.U.d, Subramani, K.e and Yazdani, J.f (2012) Surface Engineering of Dental Tools with Diamond for Improved Life and Performance. Elsevier Inc., pp. 239-272. ISBN 9781455778621

Subramani, K.a and Ahmed, Waqar (2012) Titanium Nanotubes as Carriers of Osteogenic Growth Factors and Antibacterial Drugs for Applications in Dental Implantology. Elsevier Inc., pp. 103-111. ISBN 9781455778621

Ahmed, M.a, Byrne, A.J.a, McLaughlin, J.a, Elhissi, A.b, Phoenix, D.A.b and Ahmed, Waqar (2012) Vibrational and AFM studies of adsorption of glycine on DLC and silicon-doped DLC. Journal of Materials Science, 47 (4). pp. 1729-1736. ISSN 00222461

Ahmed, M, Anthony Byrne, J, Ahmed, Waqar and Jackson, M (2012) XPS and FTIR analysis of glycine adsorption onto undoped and flourine doped Diamond like carbon films. Journal of Manufacturing Technology Research, 4 (3-4). pp. 105-123. ISSN 1943-8095