Items where Creator is "Owen, Ieuan"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 59.

Article

de Jesus Henriques, Tiago A. and Hedges, Terry S. and Owen, Ieuan and Poole, Robert J. (2016) The influence of blade pitch angle on the performance of a model horizontal axis tidal stream turbine operating under wave–current interaction. Energy, 102 . pp. 166-175. ISSN 0360-5442

Agbonzikilo, Festus and Owen, Ieuan and Stewart, Jill and Sadasivuni, Suresh Kumar and Riley, Mike and Sanderson, Victoria (2015) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. Journal of Engineering for Gas Turbines and Power, 138 (6). ISSN 0742-4795

Agbonzikilo, Festus and Owen, Ieuan and Sadasivuni, Suresh Kumar and Bickerton, Ronald A. (2015) Investigation of flow aerodynamics for optimal fuel placement and mixing in the radial swirler slot of a dry low emission gas turbine combustion chamber. Journal of Engineering for Gas Turbines and Power, 138 (5). 051505. ISSN 0742-4795

de Jesus Henriques, T. A. and Tedds, S. C. and Botsari, A. and Najafian, G. and Hedges, T. S. and Sutcliffe, C. J. and Owen, Ieuan and Poole, R. J. (2014) The effects of wave–current interaction on the performance of a model horizontal axis tidal turbine. International Journal of Marine Energy, 8 . pp. 17-35. ISSN 2214-1669

Tedds, S. C. and Owen, Ieuan and Poole, R. J. (2014) Near-wake characteristics of a model horizontal axis tidal stream turbine. Renewable Energy, 63 . pp. 222-235. ISSN 0960-1481

Kääriä, C. H. and Forrest, J. S. and Owen, I. (2013) The virtual AirDyn: a simulation technique for evaluating the aerodynamic impact of ship superstructures on helicopter operations. Aeronautical Journal , 117 (1198). pp. 1233-1248. ISSN 0001-9240

Kaaria, Christopher H. and Wang, Yaxing and White, Mark D. and Owen, Ieuan (2013) An experimental technique for evaluating the aerodynamic impact of ship superstructures on helicopter operations. Ocean Engineering, 61 . pp. 97-108. ISSN 0029-8018

Hodge, Steven J. and Forrest, James S. and Padfield, Gareth D. and Owen, Ieuan and Spencer, M. P. (2012) Simulating the environment at the helicopter-ship dynamic interface: research, development and application. The Aeronautical Journal, 116 (1185). pp. 1155-1184. ISSN 0001-9240

Kaaria, C. H. and Wang, Y. and Padfield, G. D. and Forrest, J. S. and Owen, Ieuan (2012) Aerodynamic loading characteristics of a model-scale helicopter in a ship’s airwake. Journal of Aircraft, 49 (5). pp. 1271-1278. ISSN 0021-8669

Mason-Jones, A. and O'Doherty, D. M. and Morris, C. E. and O'Doherty, T. and Byrne, C. B. and Prickett, P. W. and Grosvenor, R. I. and Owen, Ieuan and Tedds, S. and Poole, R. J. (2012) Non-dimensional scaling of tidal stream turbines. Energy, 44 (1). pp. 820-829. ISSN 0360-5442

Forrest, James S. and Owen, Ieuan and Padfield, Gareth D. and Hodge, Steven J. (2012) Ship–helicopter operating limits prediction using piloted flight simulation and time-accurate airwakes. Journal of Aircraft, 49 (4). pp. 1020-1031. ISSN 0021-8669

Aris, M. S. and McGlen, R. and Owen, I. and Sutcliffe, C. J. (2011) An experimental investigation into the deployment of 3-D, finned wing and shape memory alloy vortex generators in a forced air convection heat pipe fin stack. Applied Thermal Engineering, 31 (14-15). pp. 2230-2240. ISSN 1359-4311

Aris, M. S. and Owen, I. and Sutcliffe, C. J. (2011) The development of active vortex generators from shape memory alloys for the convective cooling of heated surfaces. International Journal of Heat and Mass Transfer, 54 (15-16). pp. 3566-3574. ISSN 0017-9310

Wang, Y. and Curran, J. and Padfield, G. D. and Owen, I. (2011) AirDyn: an instrumented model-scale helicopter for measuring unsteady aerodynamic loading in airwakes. Measurement Science and Technology, 22 (4). pp. 1-12. ISSN 0957-0233

Forrest, James S. and Owen, Ieuan (2010) An investigation of ship airwakes using Detached-Eddy Simulation. Computers & Fluids, 39 (4). pp. 656-673. ISSN 0045-7930

Wong, M. and Owen, I. and Sutcliffe, C. J. and Puri, A. (2009) Convective heat transfer and pressure losses across novel heat sinks fabricated by Selective Laser Melting. International Journal of Heat and Mass Transfer, 52 (1-2). pp. 281-288. ISSN 0017-9310

Fyrippi, I. and Owen, I. and Escudier, M. P. (2004) Flowmetering of non-Newtonian liquids. Flow Measurement and Instrumentation, 15 (3). pp. 131-138. ISSN 0955-5986

Rahimi, M. and Owen, I. and Mistry, J. (2003) Heat transfer between an under-expanded jet and a cylindrical surface. International Journal of Heat and Mass Transfer, 46 (17). pp. 3135-3142. ISSN 00179310

Rahimi, M. and Owen, I. and Mistry, J. (2003) Impingement heat transfer in an under-expanded axisymmetric air jet. International Journal of Heat and Mass Transfer, 46 (2). pp. 263-272. ISSN 0017-9310

Al-Ansari, A. D. and Owen, I. (1999) Thermal and hydrodynamic analysis of the condensation and evaporation processes in horizontal tube desalination plant. International Journal of Heat and Mass Transfer, 42 (9). pp. 1633-1644. ISSN 0017-9310

Buyruk, E. and Barrow, H. and Owen, I. (1999) Heat transfer in laminar flow in a concentric annulus with peripherally varying heat transfer. International Journal of Heat and Mass Transfer, 42 (3). pp. 487-496. ISSN 0017-9310

Buyruk, E. and Johnson, M. W. and Owen, I. (1998) Numerical and experimental study of flow and heat transfer around a tube in cross-flow at low Reynolds number. International Journal of Heat and Fluid Flow, 19 (3). pp. 223-232. ISSN 0142-727X

Owen, I. and Buyruk, E. and Barrow, H. (1996) Theoretical analysis of the thermal resistance of non-uniform fouling on cross-flow heat exchanger tubes. Applied Thermal Engineering, 16 (1). pp. 43-50. ISSN 1359-4311

Madadnia, J. and Owen, I. (1995) Erosion in conical diffusers in particulate-laden cavitating flow. International Journal of Multiphase Flow, 21 (6). pp. 1253-1257. ISSN 0301-9322

Amini, A. and Owen, I. (1995) The use of critical flow venturi nozzles with saturated wet steam. Flow Measurement and Instrumentation, 6 (1). pp. 41-47. ISSN 0955-5986

Owen, I. and Hussein, I. B. (1994) The propulsion of an isolated slug through a pipe and the forces produced as it impacts upon an orifice plate. International Journal of Multiphase Flow, 20 (3). pp. 659-666. ISSN 0301-9322

Hussein, I. B. and Owen, I. and Amini, A. M. (1992) Energy metering system for high quality saturated steam. Flow Measurement and Instrumentation, 3 (4). pp. 235-240. ISSN 0955-5986

Owen, I. and Abdul-Ghani, A. and Amini, A. M. (1992) Diffusing a homogenized two-phase flow. International Journal of Multiphase Flow, 18 (4). pp. 531-540. ISSN 0301-9322

Hussein, I.B. and Owen, I. (1991) Calibration of flowmeters in superheated and wet steam. Flow Measurement and Instrumentation, 2 (4). pp. 209-215. ISSN 0955-5986

Owen, I. and Jalil, J. M. (1991) Heterogeneous flashing in water drops. International Journal of Multiphase Flow, 17 (5). pp. 653-660. ISSN 0301-9322

Owen, I. and Hussein, I. B. (1991) Wet steam flowmeter correction factors. Flow Measurement and Instrumentation, 2 (2). pp. 139-140. ISSN 0955-5986

Owen, I. and Hussein, I. B. and Amini, A. M. (1991) The impact of water slugs on wet steam flowmeters. Flow Measurement and Instrumentation, 2 (2). pp. 98-104. ISSN 0955-5986

Wilkinson, J. and Motamed-Amini, A. and Owen, I. (1988) Compressible and confined vortex flow. International Journal of Heat and Fluid Flow, 9 (4). pp. 373-380. ISSN 0142-727X

Derbyshire, P. M. and Owen, I. (1988) Transient heat transfer in a boiled potato: a study related to food process engineering. International Journal of Heat and Fluid Flow, 9 (2). pp. 254-256. ISSN 0142-727X

Motamed-Amini, A. and Owen, I. (1987) The expansion of wet steam through a compressible confined vortex in a fluidic vortex diode. International Journal of Multiphase Flow, 13 (6). pp. 845-856. ISSN 0301-9322

Owen, I. and El-Kady, A. A. and Cleaver, J. W. (1986) A note comparing the rates of deposition of submicron particles with the rates of heat transfer for ribbed surfaces exposed to turbulent gas streams. Journal of Aerosol Science, 17 (2). pp. 145-148. ISSN 0021-8502

Owen, I. and Ryley, D. J. (1985) The flow of thin liquid films around corners. International Journal of Multiphase Flow, 11 (1). pp. 51-62. ISSN 0301-9322

Al-Azzawi, H. K. and Owen, I. (1984) Measuring the thermal conducitivity of uranin. International Journal of Heat and Fluid Flow, 5 (1). pp. 57-59. ISSN 0142-727X

Conference or Workshop contribution

Agbonzikilo, Festus and Owen, Ieuan and Sadasivuni, Suresh Kumar and Bickerton, Ronald A. (2015) Investigation of flow aerodynamics for optimal fuel placement and mixing in the radial swirler slot of a dry low emission gas turbine combustion chamber. In: ASME Turbo Expo 2015, 15-19 June 2015, Montrèal, Canada.

Fell, T. R. and White, M. D. and Jump, M. and Owen, I. and Manso, S. (2015) Sensitivity study of a small maritime rotary UAS operating in a turbulent airwake. In: AHS 71st Forum, 5 - 7 May 2015, Virginia Beach, Virginia.

Scott, P. and White, M. and Owen, I. (2015) Unsteady CFD modelling of ship engine exhaust gases and over-deck air temperatures, and the implications for maritime helicopter operations. In: AHS 71st Annual Forum, 5 - 7 May 2015, Virginia Beach, Virginia.

Agbonzikilo, Festus and Stewart, Jill and Sadasivuni, Suresh Kumar and Owen, Ieuan and Riley, Mike and Sanderson, Victoria (2014) Experimental and numerical investigation of fuel-air mixing in a radial swirler slot of a dry low emission gas turbine combustor. In: ASME Turbo Expo 2014, 16-20 June, 2014, Düsseldorf, Germany.

Scott, P. and Owen, Ieuan and White, M. (2014) The effect of ship size on the flying qualities of maritime helicopters. In: 70th American Helicopter Society International Annual Forum 2014, 20-22 May 2014, Montreal, QC, Canada.

Wang, Y. and White, M. and Owen, I. and Hodge, S. and Barakos, G. (2012) Effects of visual and motion cues in flight simulation of ship borne helicopter operations. In: Conference of 38th European Rotorcraft Forum 2012, ERF 2012, 4 - 7 September 2012, Amsterdam.

Forrest, J. S. and Kääriä, C. H. and Owen, I. (2010) Determining the impact of hangar-edge modifications on ship-helicopter operations using offline and piloted helicopter flight simulation. In: Conference of 66th Forum of the American Helicopter Society: "Rising to New Heights in Vertical Lift Technology", AHS Forum 66, 11 - 13 May 2010, Phoenix, Arizona.

Matayoshi, N. and Forrest, J. S. and Hodge, S. J. and Padfield, G. D. and Owen, I. (2009) Relationship between pilot workload and turbulence intensity for helicopter operations in harsh environments. In: Conference of 65th Annual Forum Proceedings - AHS Internationa, 27 - 29 May 2009, Grapevine, Texas.

Aris, Mohd S. and Owen, Ieuan and Sutcliffe, Chris J. (2008) The development of active flow control devices from shape memory alloys for the convective cooling of heated surfaces. In: ASME International Mechanical Engineering Congress and Exposition, IMECE 2008, 31 October 2008 - 6 November 2008;, Boston, Massachusetts, USA.

Forrest, James S. and Hodge, Steven J. and Owen, Ieuan and Padfield, Gareth D. (2008) Towards fully simulated ship-helicopter operating limits: the importance of ship airwake fidelity. In: 64th Annual Forum - AHS International, 29 April 2008 - 1 May 2008, Montreal, Canada.

Forrest, J. S. and Hodge, S. J. and Owen, I. and Padfield, G. D. (2008) An investigation of ship airwake phenomena using time-accurate CFD and piloted helicopter flight simulation. In: 34th European Rotorcraft Forum 2008, ERF34, 16 - 19 September 2008, Liverpool, UK.

Aris, Mohd S. and Owen, Ieuan and Sutcliffe, Chris J. (2007) The application of shape memory alloy as vortex generators and flow control devices for enhanced convective heat transfer. In: 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007, July 30–August 2, 2007, San Diego, California, USA.

Roper, David M. and Owen, Ieuan and Padfield, Gareth D. (2005) CFD investigation of the helicopter-ship dynamic interface. In: 61st American Helicopter Society International Annual Forum 2005, 1 - 3 June 2005, Grapevine, Texas.

Owen, I. and Gray, J. D. and Escudier, M. P. (2003) PIV measurements in large-scale cardiovascular models: the importance of dynamic scaling. In: 1st International Conference on Optical and Laser Diagnostic, 16 - 20 December 2002, London.

Owen, I. and Fyrippi, I. and Escudier, M. P. (2003) Flowmetering of shear-thinning non-Newtonian liquids. In: 4th ASME/JSME Joint Fluids Engineering Conference, 6 - 10 July 2003, Honolulu, Hawaii.

Gray, J. D. and Owen, I. and Escudier, M. P. (2001) An experimental study of the effects of non-Newtonian blood rheology in a large scale model of a distal anastomosis. In: 2001 ASME International Mechanical Engineering Congress and Exposition, 11 - 16 November 2001, New York, New York.

Owen, I. and Amini, A. (1997) Use of critical flow Venturi nozzles with steam. In: 1997 ASME Fluids Engineering Division Summer Meeting, FEDSM'97, 22 - 26 June 1997, Vancouver, British Columbia, Canada..

Owen, I. and Amini, A. (1995) Study of hydraulic impacts in steam plant. In: 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, 13 - 18 August 1995, Hilton Head, South Carolina.

Owen, I. and Madadnia, J. (1995) Valve erosion in cavitating particulate-laden flows. In: 1995 ASME/JSME Fluids Engineering and Laser Anemometry Conference and Exhibition, 13 - 18 August 1995, Hilton Head, South Carolina.

Carty, S. and Owen, I. and Bastow, B. and Steen, W. M. (1994) Powder flow from novel nozzle design for laser cladding and alloying. In: 1994 Conference on Lasers and Electro-Optics Europe, 28 August - 2 September 1994, RAI Congress Centre, Amsterdam, The Netherlands.

Owen, Ieuan (1985) Diffusion of aerosols onto a heated turbine blade. In: International Symposium Workshop on Particulate and Multiphase Processes, April 22-26, 1985, Miami, Florida.

This list was generated on Mon Sep 25 10:03:02 2017 BST.