Items where Creator is "Bingham, Chris"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | Final Publication Date | No Grouping
Number of items: 210.

Article

Zhang, Yu and Bingham, Chris and Garlick, Mike and Gallimore, Michael (2017) Applied fault detection and diagnosis for industrial gas turbine systems. International Journal of Automation and Computing . ISSN 1476-8186

Zhang, Yu and Bingham, Chris and Martinez-Garcia, Miguel and Cox, Darren (2017) Detection of emerging faults on industrial gas turbines using extended Gaussian mixture models. International Journal of Rotating Machinery . ISSN 1542-3034

Knowles, Grahame and Kirk, Antony and Bingham, Chris and Bickerton, Ron (2017) Generalised analysis of compensating balancing sleeves with experimental results from a scaled industrial turbine coupling shaft. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science . ISSN 0954-4062

Smith, Tim and Trancossi, Michele and Vucinic, Dean and Bingham, Chris and Stewart, Paul (2017) Primary and albedo solar energy sources for high altitude persistent air vehicle operation. Energies, 10(4) (573). ISSN 1996-1073

Zhang, Yu and Gallimore, Michael and Bingham, Chris and Chen, Jun and Xu, Yong (2016) Hybrid hierarchical clustering: piecewise aggregate approximation, with applications. International Journal of Computational Intelligence and Applications, 15 (4). ISSN 1469-0268

Maleki, Sepehr and Bingham, Chris and Zhang, Yu (2016) Development and realisation of changepoint analysis for the detection of emerging faults on industrial systems. IEEE Transactions on Industrial Informatics, 12 (3). pp. 1180-1187. ISSN 1551-3203

Trancossi, Michele and Madonia, Mauro and Dumas, Antonio and Angeli, Diego and Bingham, Chris and Das, Shyam Sumanta and Grimaccia, Francesco and Marques, Jose Pascoa and Porreca, Eliana and Smith, Tim and Stewart, Paul and Subhash, Maharshi and Sunol, Anna and Vucinic, Dean (2016) A new aircraft architecture based on the ACHEON Coanda effect nozzle: flight model and energy evaluation. European Transport Research Review, 8 (2). ISSN 1867-0717

Yang, Zhijing and Ling, Bingo Wing-Kuen and Bingham, Chris (2015) Approximate affine linear relationship between L1 norm objective functional values and L2 norm constraint bounds. IET Signal Processing, 9 (9). pp. 670-680. ISSN 1751-9683

Zhang, Yu and Liu, Hua and Bingham, Chris (2015) Integrated evaluation of soil fertility based on grey correlation analysis at regional scales. African Journal of Agricultural Research, 10 (12). pp. 1450-1456. ISSN 1991-637X

Zhang, Yu and Bingham, Chris and Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael (2014) Machine fault detection by signal denoising—with application to industrial gas turbines. Measurement, 58 . pp. 230-240. ISSN 0263-2241

Knowles, Grahame and Kirk, Antony and Stewart, Jill and Bickerton, Ronald and Bingham, Chris (2014) Theoretical investigation into balancing high-speed flexible shafts, by the use of a novel compensating balancing sleeve. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 228 (13). pp. 2323-2336. ISSN 0954-4062

Locatelli, Giorgio and Bingham, Chris and Mancini, Mauro (2014) Small modular reactors: a comprehensive overview of their economics and strategic aspects. Progress in Nuclear Energy, 73 . pp. 75-85. ISSN 0149-1970

Rogers, Dan and Foster, Martin and Bingham, Chris (2014) Experimental investigation of a recursive modelling MPC system for space heating within an occupied domestic dwelling. Building and Environment, 72 . pp. 356-367. ISSN 0360-1323

Zhang, Yu and Bingham, Chris and Gallimore, Michael (2013) Applied Sensor Fault Detection, Identification and Data Reconstruction. Advances in Military Technology, 8 (2). pp. 13-26. ISSN 1802-2308

Zhang, Yu and Bingham, Chris and Gallimore, Michael (2013) Fault detection and diagnosis based on extensions of PCA. Advances in Military Technology, 8 (2). pp. 27-41. ISSN 1802-2308

Yang, Z. and Ling, B. W.-K. and Bingham, C. (2013) Joint empirical mode decomposition and sparse binary programming for underlying trend extraction. IEEE Transactions on Instrumentation and Measurement, 62 (10). pp. 2673-2682. ISSN 0018-9456

Montague, R. G. and Bingham, Chris and Atallah, K. (2013) Magnetic gear pole-slip prevention using explicit model predictive control. IEEE/ASME Transactions on Mechatronics, 18 (5). pp. 1535-1543. ISSN 1083-4435

Yang, Zhijing and Ling, Bingo Wing-Kuen and Bingham, Chris (2013) Trend extraction based on separations of consecutive empirical mode decomposition components in Hilbert marginal spectrum. Measurement: Journal of the International Measurement Confederation, 46 (8). pp. 2481-2491. ISSN 0263-2241

Yang, Zhijing and Ling, B.W.-K and Bingham, Chris (2013) Fault detection and signal reconstruction for increasing operational availability of industrial gas turbine. Measurement: Journal of the International Measurement Confederation, 46 (6). pp. 1938-1946. ISSN 0263-2241

Smith, Tim and Bingham, Chris and Stewart, Paul and Allarton, Richard and Stewart, Jill (2013) Energy harvesting and power network architectures for the multibody advanced airship for transport high altitude cruiser-feeder airship concept. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 227 (4). pp. 586-598. ISSN 0954-4100

Ganthony, D. and Bingham, C. M. and Schofield, N. (2013) Integrated series active filter with reduced capacitance requirements for variable frequency aerospace systems. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 227 (4). pp. 599-607. ISSN 0954-4100

Rogers, D. and Foster, M. and Bingham, C. (2013) A recursive modelling technique applied to the model predictive control of fluid filled heat emitters. Building and Environment, 62 . pp. 33-44. ISSN 0360-1323

Montague, Ryan and Bingham, Chris (2013) Nonlinear control of magnetically-geared drive-trains. International Journal of Automation and Computing, 10 (4). pp. 319-326. ISSN 1476-8186

Ling, B.W.-K. and Bingham, Chris and Iu, H. H.-C. and Teo, K.-L. (2012) Combined optimal pulse width modulation and pulse frequency modulation strategy for controlling switched mode DC-DC converters over a wide range of loads. IET Control Theory and Applications, 6 (13). pp. 1973-1983. ISSN 1751-8644

Williams, David R. and Bingham, Chris and Stones, Daniel and Foster, M. P. (2012) Analysis of dual-output resonant power converters through use of linear load approximations. IEEE Transactions on Power Electronics, 27 (9). pp. 4051-4059. ISSN 0885-8993

Bingham, Chris and Walsh, C. and Carroll, S. (2012) Impact of driving characteristics on electric vehicle energy consumption and range. IET Intelligent Transport Systems, 6 (1). pp. 29-35. ISSN 1751-956X

Montague, R. G. and Bingham, Chris and Atallah, K. (2011) Dual-observer-based position-servo control of a magnetic gear. IET Electric Power Applications, 5 (9). pp. 708-714. ISSN 1751-8660

Montague, R. and Bingham, Chris and Atallah, K. (2011) Servo control of magnetic gears. IEEE Transactions on Mechatronics, 99 (2). pp. 1-10. ISSN 1083-4435

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Compensation of non-linearities in diode-clamped multilevel converters. Industrial Electronics, IEEE Transactions on, 57 (8). pp. 2651-2658. ISSN 0278-0046

Minshull, S. R. and Bingham, C. M. and Stone, D. A. and Foster, M. P. (2010) Compensation of nonlinearities in diode-clamped multilevel converters. IEEE Transactions on Industrial Electronics, 57 (8). pp. 2651-2658. ISSN 0278-0046

Minshull, S. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2010) Frequency reduction schemes for back-to-back connected, diode-clamped multilevel converters. Power Electronics, IET, 3 (1). pp. 65-74. ISSN 1755-4535

Williams, D. and Bingham, Chris and Foster, M. P. and Stone, D. A. (2010) Hamel locus design of self-oscillating DC-DC resonant converters. Power Electronics, IET, 3 (1). pp. 86-94. ISSN 1755-4535

Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris and Stone, D. A. (2009) Improved rotor-position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. Industry Applications, IEEE Transactions on, 45 (5). pp. 1843-1850. ISSN 0093-9994

Gould, C. and Bingham, Chris and Stone, D. A. and Bentley, P. (2009) New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques. Vehicular Technology, IEEE Transactions on, 58 (8). pp. 3905-3916. ISSN 0018-9545

Bingham, Chris and Ang, Y. and Foster, M. P. and Stone, D. A. (2008) Analysis and control of dual-output LCLC resonant converters with significant leakage inductance. IEEE Transactions on Power Electronics, 23 (4). pp. 1724-1732. ISSN 0885-8993

Foster, M. P. and Gould, C. and Gilbert, A. J. and Stone, D. A. and Bingham, Chris (2008) Analysis of CLL voltage-output resonant converters using describing functions. IEEE Transactions on Power Electronics, 23 (4). pp. 1772-1781. ISSN 0885-8993

Gilbert, A J and Bingham, Chris and Stone, D A and Foster, M P (2008) Self-oscillating control methods for the LCC current-output resonant converter. IEEE TRANSACTIONS ON POWER ELECTRONICS, 23 (4). pp. 1973-1986. ISSN 0885–8993

Williams, D and Bingham, Chris and Foster, M P and Stone, D A (2008) Self-oscillating control of a DC-DC resonant converter using a hysteretic relay. ISAST Transactions on Electronics and Signal Processing, 2 (3). pp. 70-75. ISSN 1797-2329

Foster, M. P. and Gilbert, A. G. and Gould, C. R. and Stone, D. A. and Bingham, Chris (2007) Automated design of LCC resonant converters using a genetic algorithm employing a describing function equivalent circuit converter model. ISAST Transactions on Electronics and Signal Processing, 1 (1). pp. 33-37. ISSN 1797-2329

Gilbert, A. J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Normalized analysis and design of LCC resonant converters. IEEE Transactions on Power Electronics, 22 (6). pp. 2386-2402. ISSN 0885-8993

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris (2007) Modeling of cross-coupling magnetic saturation in signal-injection-based sensorless control of permanent-magnet brushless AC motors. IEEE Transactions on Magnetics, 43 (6). pp. 2552-2554. ISSN 0018-9464

O'Sullivan, T and Bingham, Chris and Schofield, N (2007) Observer-based tuning of two-inertia servo-drive systems with integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 52 (2). pp. 1080-1091. ISSN 0278-0046

Schofield, N. and Yap, H. T. and Bingham, Chris (2006) A hydrogen fuel cell - high energy dense battery hybrid energy/power source for an urban electric vehicle. International Journal of Electrical Engineering and Transportation, 2 (2). pp. 25-31. ISSN 1773-9357

OSullivan, T M and Bingham, Chris and Schofield, N (2006) High-performance control of dual-inertia servo-drive systems using low-cost integrated SAW torque transducers. IEEE Transactions on Industrial Electronics, 53 (4). pp. 1226-1237. ISSN 0278-0046

Foster, M P and Sewell, H I and Bingham, Chris and Stone, D and Howe, D (2006) Methodologies for the design of LCC voltage-output resonant converters. IEE Proceedings on Electrical Power Applications, 153 (4). pp. 559-567. ISSN 1751-8660

Gould, C and Bingham, Chris and Foster, M P and Stone, D A (2005) CLL resonant converters with output short-circuit protection. Institute of Electrical Engineers Electric Power Applications, 152 (5). pp. 1296-1306. ISSN 0885-8993

Bhangu, B and Bentley, P and Stone, D A and Bingham, Chris (2005) Nonlinear observers for predicting state-of-charge and state-of-health of lead-acid batteries for hybrid-electric vehicles. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 54 (3). pp. 783-794. ISSN 0018-9545

Ang, Y. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2005) Design oriented analysis of fourth-order LCLC converters with capacitive output filter. Institute of Electrical Engineers Journal of Electric Power Applications, 152 (2). pp. 310-322. ISSN 0013-5194

Snary, P and Bhangu, B and Bingham, Chris and Stone, D A and Schofield, N (2005) Matrix converters for sensorless control of PMSMs and other auxiliaries on deep-sea ROVs. IEE Journal of Electric Power Applications, 152 (2). pp. 382-392. ISSN 1751-8660

Gilbert, A J and Stone, D A and Bingham, Chris (2005) Rapid design of LCC current-output resonant converters with reduced electrical stresses. Institute of Electrical Engineers: Journal of Electronics Letters, 41 (6). pp. 365-366. ISSN 0013-5194

O'Sullivan, T. and Schofield, N. and Bingham, Chris (2004) Simulation and experimental validation of induction machine dynamics driving multi-inertial loads. International Journal of Applied Electromagnetics and Mechanics, 19 (1-4). pp. 231-236. ISSN 1383-5416

Ang, Y and Foster, M P and Bingham, Chris and Stone, D A and Sewell, H I and Howe, D (2004) Analysis of 4th-order LCLC resonant power converters. Institute of Electrical Engineering Journal of Electric Power Applications, 151 (2). pp. 169-181. ISSN 0013-5194

Schofield, N and O'Sullivan, T M and Bingham, Chris and Lonsdale, A (2004) Improved performance of motor-drive systems by SAW shaft torque feedback. Transactions of the Institute of Measurement and Control, 37 (9). pp. 276-283. ISSN 0142-3312

Sewell, H I and Stone, D A and Bingham, Chris (2004) A describing function for resonantly commutated H-bridge inverters. IEEE TRANSACTIONS ON POWER ELECTRONICS, 19 (4). pp. 1010-1021. ISSN 0885-8993

Sewell, H I and Foster, M P and Bingham, Chris and Stone, D A and Hente, D and Howe, D (2003) Analysis of voltage output LCC resonant converters, including boost mode operation. IET Electric Power Applications, 150 (6). pp. 673-679. ISSN 1751-8660

Khatun, P and Bingham, Chris and Schofield, N and Mellor, P H (2003) Application of Fuzzy control algorithms for electric vehicle antilock braking/traction control systems. IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 52 (5). pp. 1356-1364. ISSN 0018-9545

Sewell, H I and Stone, D A and Bingham, Chris (2003) Dynamic load impedance matching for induction heater systems. The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 22 (1). pp. 30-38. ISSN 0332-1649

Foster, M. P. and Sewell, H. I. and Bingham, Chris and Stone, D. A. and Hente, D. (2003) High-speed analysis of resonant power converters. Electric Power Applications, IEE Proceedings -, 150 (1). pp. 62-70. ISSN 1350-2352

Foster, M P and Sewell, H I and Bingham, Chris and Stone, D A and Hente, D and Howe, D (2003) Cyclic-averaging for high-speed analysis of resonant converters. IEEE TRANSACTIONS ON POWER ELECTRONICS, 18 (4). pp. 985-993. ISSN 0885-8993

Ang, Y. and Foster, M. P. and Sewell, H. I. and Bingham, Chris and Stone, D. A. (2002) Stress analysis of fourth-order LLCC resonant converters. IEE Electronics Letters, 38 (24). pp. 1585-1586. ISSN 0013-5194

Mosely, I. and Mellor, P. H. and Bingham, Chris (2002) Effect of dead time on harmonic distortion in class-D audio power amplifiers. IEE Electronics Letters, 35 (12). pp. 950-952. ISSN 0013-5194

Howe, D. and Schofield, N. and Bingham, Chris (2002) Energy optimised traction system for all-electric vehicles. IEE Power Engineering Journal, 16 (1). pp. 29-32. ISSN 1479-8344

Mitchell, J. K. and Jewell, G. J. and Wang, J. and Bingham, Chris and Howe, David (2002) Influence of an aperture on the performance of a two-degree-of-freedom iron-cored spherical permanent-magnet actuator. IEEE Transactions on Magnetics, 38 (6). pp. 3650-3653. ISSN 0018-9464

Musgrave, D. and Bingham, Chris and Stone, D. A. and Howe, D. (2002) Modelling and multivariable control of a gearless, electrically actuated vibratory system. Electric Power Applications, IEE Proceedings -, 147 (5). pp. 345-352. ISSN 1350-2352

Peel, D. and Bingham, Chris and Wu, Y. and Howe, D. (2002) Simplified characteristics of active magnetic bearings. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 216 (5). pp. 623-628. ISSN 0954-4062

Foster, M. P. and Sewell, H. I. and Bingham, Chris and Stone, D. A. (2002) State-variable modelling of LCC voltage-output resonant converters. Electronics Letters, 37 (17). pp. 1065-1066. ISSN 0013-5194

Wu, Y. and Bingham, Chris and Peel, D. and Howe, D. (2001) Active magnetic bearings for a flywheel peak power buffer for electric vehicles. International Journal of Applied Electromagnetics and Mechanics, 15 (1). pp. 201-206. ISSN 1383-5416

Khatun, P. and Bingham, Chris and Mellor, P. H. (2001) Comparison of control methods for electric vehicle antilock braking / traction control systems. SAE Technical Paper Series, SP-157 (2001-0). ISSN 0148-7191

Sewell, H. I. and Stone, D. A. and Bingham, Chris (2000) Novel, three phase, unity power factor modular induction heater. Electric Power Applications, IEE Proceedings -, 147 (5). pp. 371-378. ISSN 1350-2352

Bingham, Chris and Stone, D A and Schofield, N and Howe, D and Peel, D (2000) Amplitude and frequency control of a vibratory pile driver. IEEE Transactions on Industrial Electronics, 47 (3). pp. 623-631. ISSN 0278-0046

Duan, G R and Wu, Z Y and Bingham, Chris and Howe, D (2000) Robust magnetic bearing control using stabilizing dynamical compensators. IEEE Transactions on Industry Applications, 36 (6). pp. 1654-1660. ISSN 0093-9994

Book Section

Chen, Jun and Gallimore, Michael and Bingham, Chris and Mahfouf, Mahdi and Zhang, Yu (2014) Intelligent data compression, diagnostics and prognostics using an evolutionary-based clustering algorithm for industrial machines. In: Fault detection: classification, techniques and role in industrial systems. NOVA Science Publisher, New York, pp. 209-228. ISBN 9781628089998

Carroll, S. and Walsh, C. and Bingham, C. and Chen, R. and Lintern, M. (2012) Electric vehicle efficiency mapping. In: Sustainable vehicle technologies: driving the green agenda. Woodhead Publishing Limited, pp. 133-122. ISBN 9780857094568

Conference or Workshop contribution

Gallimore, Michael and Bingham, Chris and Riley, Mike (2017) Self-organising symbolic aggregate approximation for real-time fault detection and diagnosis in transient dynamic systems. In: 15th IEEE International Symposium on Applied Machine Intelligence and Informatics, 26-28 January 2017, Slovakia.

Grebenik, Jarek and Zhang, Yu and Bingham, Chris and Srivastava, Saket (2016) Roller element bearing acoustic fault detection using smartphone and consumer microphones. In: 17th International Conference on Mechatronics - Mechatronika (ME), 2016, 7 - 9 December 2016, Prague, Czech Republic.

Kirk, Antony and Griffiths, Jonathan David and Bingham, Chris and Knowles, Grahame and Bickerton, Ronald (2016) Passive control of critical speeds of a rotating shaft using eccentric sleeves: model development (GT2016-58155). In: ASME Turbo Expo 2016, 13 - 17 June 2016, Seoul, South Korea.

Tsang, C.-W. and Bingham, C. M. and Foster, M. P. and Stone, D. A. and Leech, J. M. (2016) Multi-stage LLC resonant converters designed for wide output voltage ranges. In: PCIM 2016, 10-12th May 2016, Nuremburg, Germany.

Tsang, C. and Bingham, C. and Foster, M. P. and Stone, D. and Leech, J. (2016) Battery charger with a capacitor-diode clamped LLC resonant converter. In: The 8th IET International Conference on Power Electronics, Machines and Drives (PEMD) 2016, 19 – 21 April 2016, Glasgow, UK.

Tsang, C.-W. and Bingham, C, and Foster, M. P. and Stone, D. and Davidson, J. N. and Leech, J. M. (2016) Minimum charge-recovery time control with parallel connected buck converters. In: The 8th IET International Conference on Power Electronics, Machines and Drives (PEMD) 2016, 19 – 21 April 2016, Glasgow, UK. Institution of Engineering and Technology.

Maleki, Sepehr and Bingham, Chris and Zhang, Yu (2015) An online changepoint detection algorithm for highly correlated data. In: 3rd International Conference on Advances in Information Processing and Communication Technology - IPCT, 10 - 11 Dec 2015, Rome, Italy.

Maleki, Sepehr and Bingham, Chris and Zhang, Yu (2015) 2-D online changepoint detection algorithm for sensor-based fault detection. In: Third International Conference on Advances in Computing, Electronics and Communication, 10 - 11 October 2015, Zurich, Switzerland.

Zhang, Yu and Bingham, Chris and Maleki, Sepehr (2015) Measurement reconstruction in sensor networks for industrial systems. In: Third International Conference on Advances in Computing, Electronics and Communication, 10 - 11 October 2015, Zurich, Switzerland.

Trancossi, Michele and Bingham, Chris and Capuani, Alfredo and Das, Shyam and Dumas, Antonio and Grimaccia, Francesco and Madonia, Mauro and Pascoa, Jose and Smith, Tim and Stewart, Paul and Subhash, Maharshi and Sunol, Anna and Vucinic, Dean (2015) Multifunctional unmanned reconnaissance aircraft for low-speed and STOL operations. In: SAE 2015 AeroTech Congress & Exhibition, 22 - 24 September 2015, Washington State Convention Center, Seattle.

Trancossi, Michele and Dumas, Antonio and Madonia, Mauro and Subhash, Maharshi and Pascoa, Jose and Das, Shyam and Grimaccia, Francesco and Bingham, Chris and Smith, Tim and Vucinic, Dean and Sunol, Anna (2015) Preliminary implementation study of ACHEON thrust and vector electrical propulsion on a STOL light utility aircraft. In: SAE 2015 AeroTech Congress & Exhibition, 22 - 24 September 2015, Washington State Convention Center, West tlplpe.

Margetts, Rebecca and Bingham, Chris and Smith, Tim (2015) NDI-based controller for Acheon-based thrust vectoring of aircraft. In: SAE 2015 AeroTech Congress & Exhibition, September 22-24, 2015, Seattle, Washington, USA.

Avdic, Dalila and Gallimore, Michael and Riley, Mike and Bingham, Chris (2015) Neutrophil count prediction for personalized drug dosing in childhood cancer patients receiving 6-mercaptopurine chemotherapy treatment. In: International Conference on Medical and Health Sciences, 13th June 2015, Berlin, Germany.

Gallimore, Michael and Riley, Mike and Bingham, Chris (2015) Self-Organizing Piecewise Aggregate Approximation algortihm for intelligent detection and diagnosis of heart conditions. In: International Conference on Medical and Health Sciences, 13th June 2015, Berlin, Germany.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Cox, Darren (2015) Novelty detection based on extensions of GMMs for industrial gas turbines. In: IEEE international conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 12-14 June, 2015, Shenzhen, China.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Maleki, Sepehr (2015) Operational pattern analysis for predictive maintenance scheduling of industrial systems. In: IEEE international conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 12-14 June, 2015, Shenzhen, China.

Zhang, Yu and Chen, Jun and Bingham, Chris (2015) Variational Bayesian modified adaptive Mamdani Fuzzy Modelling for use in condition monitoring. In: IEEE international conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 12-14 June, 2015, Shenzhen, China.

Kirk, A. and Georgiadis, F. and Bingham, C. (2014) Towards determination of critical speeds of a rotating shaft with eccentric sleeves: equations of motion. In: 9th IFToMM International Conference on Rotor Dynamics, 22 - 25 September 2014, Milan; Italy.

Zhang, Yu and Bingham, Chris and Gallimore, Michael (2014) Applied sensor fault detection and identification during steady-state and transient system operation. In: International Conference on Advanced Technology & Sciences (ICAT'14), 12-15 August, 2014, Antalya, Turkey.

Zhang, Yu and Chen, Jun and Bingham, Chris and Mahfouf, Mahdi (2014) A new adaptive Mamdani-type fuzzy modeling strategy for industrial gas turbines. In: 2014 IEEE International Conference on Fuzzy Systems, 6-11 July, 2014, Beijing, China.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Chen, Jun (2013) Steady-state and transient operation discrimination by Variational Bayesian Gaussian Mixture Models. In: IEEE International Workshop on Machine Learning for Signal Processing (MLSP 2013), 22-25 September 2013, Southampton, UK.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Yang, Zhijing and Chen, Jun (2013) Machine fault detection during transient operation using measurement denoising. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 15-17 July 2013, Milan, Italy.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Yang, Zhijing and Chen, Jun (2013) Sensor fault detection and diagnosis based on SOMNNs for steady-state and transient operation. In: IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications (CIVEMSA), 15-17 July 2013, Milan, Italy.

Riley, Mike J. W. and Gallimore, Michael and Bingham, Chris and Stewart, Jill (2013) Gas turbine health classification using a hybridized optimization algorithm. In: 4th International Conference on Integrity, Reliability & Failure, 23-27 June 2013, Funchal, Portugal.

Gallimore, Michael and Riley, Mike and Bingham, Chris and Yang, Zhijing and Zhang, Yu (2013) Intelligent diagnostics and prognostics for industrial machines using an optimization approach. In: 4th International Conference on Integrity, Reliability & Failure, 23-27 June 2013, Funchal, Portugal.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Yang, Zhijing and Stewart, Paul (2013) Applied sensor fault detection, identification and data reconstruction based on PCA and SOMNN for industrial systems. In: 12th WSEAS International Conference on Applications of Electrical Engineering (AEE '13), January 30th - February 1st 2013, Cambridge, Mass..

Zhang, Yu and Sansour, Carlo and Bingham, Chris (2013) Single-walled carbon nanotube modelling based on Cosserat surface theory. In: 12th WSEAS International Conference on Applications of Electrical Engineering (AEE '13), January 30th - February 1st 2013, Cambridge, Mass..

Yang, Zhijing and Ling, Wing-Kuen and Bingham, Chris (2013) Extracting underlying trend and predicting power usage via joint SSA and sparse binary programming. In: 2013 IEEE International Symposium on Circuits and Systems (ISCAS), 19-23 May 2013, Beijing, China.

Kirk, Antony and Knowles, Grahame and Stewart, Jill and Bingham, Chris (2013) Mathematical development and modelling of a counter balance compensating sleeve for the suppression of lateral vibrations in high speed flexible couplings. In: ASME Turbo Expo 2013, 3-7 June 2013, San Antonio, Texas, USA.

Zhang, Yu and Bingham, Chris and Yang, Zhijing and Gallimore, Michael and Stewart, Paul (2012) Applied sensor fault detection and identification using hierarchical clustering and SOMNNs, with faulted-signal reconstruction. In: 15th International Symposium on Mechatronics - MECHATRONIKA 2012, 5-7 December 2012, Prague, Czech Republic.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Yang, Zhijing and Stewart, Jill (2012) Fault detection and diagnosis based on y-indices and Residual Errors. In: 15th International Symposium on Mechatronics, MECHATRONIKA 2012, 5-7 December 2012, Prague, Czech Republic.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Zhang, Yu and Gallimore, Michael and Stewart, Jill (2012) Unit operational pattern analysis and forecasting using EMD and SSA for industrial systems. In: 11th International Symposium, IDA 2012, October 25-27, 2012, Helsinki, Finland.

Smith, Tim and Bingham, Chris and Stewart, Paul and Allarton, Rich and Stewart, Jill (2012) MAAT high altitude cruiser feeder airship concept. In: Electrical Systems for Aircraft, Railway and Ship Propulsion (ESARS), 2012, 16-18 October 2012, Bologna, Italy.

Chen, Jun and Mahfouf, Mahdi and Bingham, Chris and Zhang, Yu and Yang, Zhijing and Gallimore, Michael (2012) An evolutionary based clustering algorithm applied to Dada compression for industrial systems. In: 11th International Symposium, IDA 2012, October 25-27, 2012, Helsinki, Finland.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Yang, Zhijing and Chen, Jun (2012) Applied sensor fault detection and validation using transposed input data PCA and ANNs. In: IEEE Conference on Multisensor Fusion and Integration for Intelligent Systems (MFI), 13-15 September 2012, Hamburg, Germany.

Zhang, Yu and Bingham, Chris and Gallimore, Michael and Yang, Zhijing and Chen, Jun (2012) Sensor fault detection for industrial systems using a hierarchical clustering-based graphical user interface. In: IEEE Conference on Multisensor Fusion and Integration for Intelligent Systems (MFI), 13-15 September 2012, Hamburg, Germany.

Zhang, Yu and Bingham, Chris and Yang, Zhijing and Gallimore, Michael and Ling, Wing-Kuen (2012) Sensor fault detection for industrial gas turbine system by using principal component analysis based y-distance indexes. In: 8th IEEE, IET International Symposium on Communication Systems, Networks & Digital Signal Processing (CSNDSP), 18–20 July 2012, Poznan University of Technology, Poznan, Poland.

Carroll, S. and Walsh, C. and Bingham, Chris and Chen, R. and Lintern, M. (2012) Electric vehicle efficiency mapping. In: Sustainable Vehicle Technologies:, 14-15 November 2012, Gaydon, Warwickshire.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Intelligent condition monitoring via sparse representation and principal component analysis for industrial gas turbine systems. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Gallimore, Michael and Yang, Zhijing and Bingham, Chris and Stewart, Paul and James, N. and Watson, S. and Latimer, A. (2011) Novelty detection for predictive maintenance scheduling for industrial gas turbines. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul and Bingham, Chris (2011) Sensor fault detection and measurement reconstruction using an analytical optimization approach. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Yang, Zhijing and Bingham, Chris and Ling, Wing-Kuen and Gallimore, Michael and Stewart, Paul (2011) Trend extraction using empirical mode decomposition and nonuniform filter banks, with industry application. In: International Conference on Mechanical Engineering and Technology (ICMET-London 2011), November 2011, London.

Rogers, Dan and Foster, Martin P. and Bingham, Chris (2011) Simulation of a scheduling control scheme for domestic central heating systems in the UK. In: Applied Simulation and Modelling (ASM 2011), June 22-24, 2011, Crete, Greece.

Bingham, Chris (2010) Power/energy storage technologies and energy management. In: 2010 AECS Advanced engine control symposium, 3-5 November 2010, Tianjin University, P.R. China.

Gould, C. and Bingham, Chris and Stone, D. and Foster, M. (2010) State-of-Function determination for EV/HEV battery packs. In: The 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium & Exhibition, Nov 5-9 2010, Shenzhen, China.

Gladwin, D. and Rogers, D. and Bingham, Chris and Stewart, Paul and Wilson, M. and Mitchell, S. and Nortcliffe, R. (2010) Building heating simulation design for control analysis. In: IASTED International Conference on Modelling and Simulation, 6-8 September 2010, Gaborone, Botswana.

Montague, R. G. and Bingham, Chris and Atallah, K. (2010) Magnetic gear dynamics for servo control. In: MELECON 2010 - 2010 15th IEEE Mediterranean Electrotechnical Conference, 26-28 April 2010, Valetta, Malta.

Foster, M. P. and Stone, D. A. and Bingham, Chris (2009) Automated design of LLC resonant converters using a genetic algorithm. In: PCIM 2009, May 2009, Nurnberg, Germany.

Minshull, S. and Bingham, Chris and Foster, M. P. and Stone, D. A. (2009) Comparison between multilevel and classical 2-Level inverters regarding stall torque improvements for driving brushless PM machines. In: PCIM Europe 2009, Power Conversion Intelligent Motion Conference, May 2009, Nurnberg, Germany.

Walsh, C and Bingham, Chris (2009) Electric drive vehicle deployment in the UK. In: EVS24 International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, May 2009, Stavanger, Norway.

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, C M (2009) A three-phase to single-phase matrix converter for high-frequency induction heating. In: Power Electronics and Applications, 2009. EPE '09. 13th European Conference on, 8-10 Sept 2009, Barcelona.

Wilkie, K. D. and Foster, M. P. and Stone, D. A. and Bingham, C. M. (2008) Hardware-in-the-loop tuning of a feedback controller for a buck converter using a GA. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on, 11-13 June 2008, Ischia, Italy.

Wilkie, K. and Stone, D. and Bingham, C. and Foster, M. (2008) Integrated multilevel converter and battery management. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on, 11-13 June 2008, Ischia, Italy.

Gould, C and Bingham, Chris and Stone, D A and Bentley, P (2008) Novel battery model of an all-electric personal rapid transit vehicle to determine state-of-health through subspace parameter estimation and a Kalman Estimator. In: Power Electronics, Electrical Drives, Automation and Motion, 2008. SPEEDAM 2008. International Symposium on, 11-13 June 2008, Ischia, Italy.

Gilbert, A G and Foster, M P and Stone, D A and Bingham, Chris (2008) Phase Locked Loop (PLL) based self-oscillating controller for LCC resonant converters. In: Power Electronics Machines and Drives PEMD 2008 Conference, 2-4 April 2008, University of York UK.

Williams, D and Foster, M P and Bingham, Chris and Stone, D A (2008) A genetic algorithm for designing LCLC resonant converters. In: Power Electronics, Machines and Drives, 2008. PEMD 2008. 4th IET Conference on, 2-4 April 2008, University of York UK.

Minshull, S and Bingham, Chris and Stone, D A and Foster, M P (2008) A new switching scheme for reduced switching frequency and balanced capacitor voltages for back-to-back connected, diode-clamped multilevel converters. In: Power Electronics, Machines and Drives, 2008. PEMD 2008. 4th IET Conference on, 2-4 April 2008, University of York UK.

Williams, D. R. and Bingham, Chris and Stone, D. A. and Foster, M. P. and Gilbert, A. (2007) Analysis of self-oscillating DC-DC resonant power converters using a hysteretic relay. In: Power Electronics and Applications, 2007 European Conference on, 2-5 September 2007, Aalborg, Denmark.

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris and Stone, D (2007) Improved rotor position estimation by signal injection in brushless AC motors, accounting for cross-coupling magnetic saturation. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting., 23-27 Sept 2007, New Orleans, USA.

Wilkie, K. and Stone, D. A. and Foster, M. P. and Bingham, Chris (2007) A cascaded H-bridge BLDC drive incorporating battery management. In: 12th European Conference on Power Electronics and Applications, 2-5 September 2007, Aalborg, Denmark.

Ang, Y and Bingham, Chris and Foster, M P and Stone, D A (2007) Analysis and control of dual-output LCLC resonant converters, and the impact of leakage inductance. In: Power Electronics and Drive Systems, 2007. PEDS '07. 7th International Conference on, 27-30 Nov 2007, Bangkok, Thailand.

Nguyen-Quang, N. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Comparison of single-phase matrix converter and H-bridge converter for radio frequency induction heating. In: Power Electronics and Applications, 2007 European Conference on, 2-5 September 2007, Aalborg, Denmark.

Zhu, Z Q and Li, Y and Howe, D and Bingham, Chris (2007) Compensation for rotor position estimation error due to cross-coupling magnetic saturation in signal injection based sensorless control of PM brushless AC motors. In: Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International, 3-5 May 2007, Antalya, Turkey.

Gilbert, A. J. and Stone, D. A. and Bingham, Chris and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on, 2-5 September 2007, Aalborg, Denmark.

Gilbert, A .J. and Bingham, Chris and Stone, D. A. and Foster, M. P. (2007) Design of an LCC current-output resonant converter for use as a constant current source. In: Power Electronics and Applications, 2007 European Conference on, 2-5 September 2007, Aalborg, Denmark.

Essex, N and Foster, M P and Bingham, Chris and Kuo, C (2007) GA tuning of pitch controller for small scale MAVs. In: 6th WSEAS International Conference on CIRCUITS, SYSTEMS, ELECTRONICS,CONTROL & SIGNAL PROCESSING, 29-31 Dec 2007, Cairo, Egypt.

Li, Y and Zhu, Z Q and Howe, D and Bingham, Chris (2007) Improved rotor position estimation in extended back-EMF based sensorless PM brushless AC drives with magnetic saliency. In: Electric Machines & Drives Conference, 2007. IEMDC '07. IEEE International, 3-5 May 2007, Antalya, Turkey.

Li, Y. and Zhu, Z .Q. and Bingham, Chris and Howe, D. (2007) Improved signal injection based sensorless technique for PM brushless AC drives. In: 2007 IEEE International Conference on Networking, Sensing and Control, 15-17 April 2007, London, UK.

Zhu, Z Q and Li, Y and Howe, D and Bingham, Chris and Stone, D A (2007) Influence of machine topology and cross-coupling magnetic saturation on rotor position estimation accuracy in extended back-EMF based sensorless PM brushless AC drives. In: Industry Applications Conference, 2007. 42nd IAS Annual Meeting. Conference Record of the 2007 IEEE, 23-27 Sept 2007, New Orleans, USA.

Ganthony, D and Bingham, Chris (2007) Integrated series active filter for aerospace flight control surface actuation. In: Power Electronics and Applications, 2007 European Conference on, 2-5 September 2007, Aalborg, Sweden.

Ang, Y and Bingham, Chris and Foster, M P and Stone, D A (2007) Modelling and regulation of dual-output LCLC resonant converters. In: Industrial Electronics Society, 2007. IECON 2007. 33rd Annual Conference of the IEEE, 5-8 Nov 2007, Taipei, Taiwan.

Li, Y. and Zhu, Z. Q. and Howe, D. and Bingham, Chris (2007) Modelling of cross-coupling magnetic saturation in signal injection based sensorless control of permanent magnet AC motors. In: IEEE MMM/Intermag Conference 2007, 6-8 June 2007, Baltimore, USA.

Ang, Y A and Stone, D A and Bingham, Chris and Foster, M (2007) Rapid analysis & design methodologies of High-Frequency LCLC Resonant Inverter as Electrodeless Fluorescent Lamp Ballast. In: Power Electronics and Drive Systems, 2007. PEDS '07. 7th International Conference on, 27-30 Nov 2007, Bangkok, Thailand.

Minshull, S. and Bingham, Chris and Foster, M. P. and Stone, D. A. (2007) A back to back multilevel converter for driving low inductance brushless AC machines. In: Power Electronics and Applications, 2007 European Conference on, 2-5 September 2007, Aalborg, Denmark.

Gould, C. and Foster, M. P. and Bingham, Chris and Stone, D. A. (2006) Bandwidth controlled steady-state design and analysis of a 3kW CLL resonant converter with rectified mains output characteristics. In: 006 International Conference on Electrical Machines and Systems (ICEMS), 20-23 Nov 2006, Nagasaki, Japan.

Nguyen-Quang, N and Stone, D A and Bingham, Chris and Foster, M P (2006) Single phase matrix converter for radio frequency induction heating. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on, 23-26 May 2006, Sicily, Italy.

Bhangu, B. and Bentley, P. and Stone, D. A. and Bingham, Chris (2006) State of charge estimation of valve-regulated sealed lead-acid batteries in hybrid-electric vehicles. In: 10th EUROPEAN LEAD BATTERY CONFERENCE, 26-29 September 2006, Athens, Greece.

O'Sullivan, T M and Bingham, Chris and Clark, R E (2006) Zebra battery technologies for all electric smart car. In: Power Electronics, Electrical Drives, Automation and Motion, 2006. SPEEDAM 2006. International Symposium on, 23-26 May 2006, Sicily, Italy.

Foster, M. P. and Gould, C. R. and Stone, D. A. and Bingham, Chris (2006) A novel AC equivalent circuit for the CLL voltage-output resonant converter using describing functions. In: 2006 International Conference on Electrical Machines and Systems (ICEMS), 20-23 Nov 2006, Nagasaki, Japan.

Ang, Y A and Bingham, Chris and Stone, D A and Foster, M (2005) Digital control of dual-load LCLC resonant converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Gilbert, A. and Bingham, Chris and Bhangu, B. S. and Foster, M. P. and Stone, D. A. (2005) EKF-based output-voltage regulation of 3rd-order LCC resonant converters subject to load variations. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

West, M and Long, S and Wang, J and Bingham, Chris and Howe, D (2005) Emergency braking for free piston energy converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Schofield, N and Yap, H T and Bingham, Chris (2005) Hybrid energy sources for electric and fuel cell vehicle propulsion. In: Vehicle Power and Propulsion, 2005 IEEE Conference, 7-9 Sept 2005, USA.

Snary, P and Bingham, Chris and Stone, D A (2005) Influence of ROV umbilical on power quality when supplying electrical loads. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

O'Sullivan, T M and Bingham, Chris and Schofield, N (2005) Observer based tuning techniques and integrated SAW torque transducers for two-inertia servo-drive systems. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) Observer techniques for estimating the state-of-charge and state-of-health of VRLABs for hybrid electric vehicles. In: Vehicle Power and Propulsion, 2005 IEEE Conference, 7-9 Sept 2005, USA.

Gilbert, A and Bingham, Chris and Stone, D A (2005) Rapid design of LCC current-output resonant converters with reduced electrical stresses. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Li, Y. and Zhu, Z. Q. and Bingham, Chris and Howe, D. (2005) Sensor fusion for rotor position estimation of permanent magnet brushless AC drives. In: 11th Chinese Automation and Computer Society Conference, September 2005, Sheffield UK.

Bhangu, B S and Snary, P and Bingham, Chris and Stone, D A (2005) Sensorless control of deep-sea ROVs PMSMs excited by matrix converters. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Bhangu, B S and Bentley, P and Stone, D A and Bingham, Chris (2005) State-of-charge and state-of-health prediction of lead-acid batteries for hybrid electric vehicles using non-linear observers. In: Power Electronics and Applications, 2005 European Conference on, September 2005, Dresden, Germany.

Ang, V and Stone, D A and Bingham, Chris and Foster, P P (2004) Analysis & design of high-frequency LCLC resonant converters for electrode-less fluorescent lamp ballasts. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498), 31 Mar - 2 April 2004, Edinburgh, Scotland.

Gilbert, A. J. and Bingham, Chris and Bhangu, B. and Foster, M. P. (2004) EKF based feedback control of 3rd order LCC resonant converters with significant load variations. In: EPE-PEMC 2004 - International Power Electronics and Motion Control Conference 2004, 2004, Riga, Latvia.

Bhangu, B S and Bingham, Chris (2004) GA-based tuning of nonlinear observers for sensorless control of IPMSMs. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498), 31 Mar - 2 April 2004, Edinburgh, Scotland.

Schofield, N. and O'Sullivan, T. and Bingham, Chris (2004) Improved performance of industrial servo-drive systems by saw shaft torque feedback. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

O'Sullivan, T. and Schofield, N. and Bingham, Chris (2004) Improved tracking control of industrial servo-drive system by saw torque feedback. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498), 31 Mar - 2 April 2004, Edinburgh, Scotland.

Snary, P. and Banghu, B. and Bingham, Chris and Stone, D. A. (2004) Matrix converters for sensorless control of PMSMs and other auxiliaries on deep-sea ROVs. In: Power Electronics, Machines and Drives, 2004. (PEMD 2004). Second International Conference on (Conf. Publ. No. 498), 31 March - 2 April 2004, Edinburgh, Scotland.

Gould, C and Bingham, Chris and Stone, D A and Foster, M P (2004) Rapid steady-state analysis of CLL resonant power converters. In: IASTED International Conference on Circuits, Signals, and Systems - 2004, Nov 28 - Dec 01 2004, Clearwater Beach, Florida USA.

Ganthony, D. and Schofield, N. and Bingham, Chris and Trainer, D. (2004) conditioning of aircraft flight control surface loads. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

Schofield, N. and Yap, H. T. and Bingham, Chris (2004) A hydrogen fuel cell vs energy dense battery hybrid energy/power source for an urban electric vehicle. In: 16th International Conference on Electrical Machines – ICEM’04, Sept 2004, Cracow, Poland.

Jakeman, N. and Bullough, W. A. and Bingham, Chris and Mellor, P. H. (2003) Brushless PM linear actuator for high acceleration winding applications. In: Eleventh International Symposium on Applied Electromagnetics and Mechanics, ISEM-Versailles, 2003, Versaillles, France.

Snary, P and Bingham, Chris and Stone, D A and Schofield, N (2003) Drive systems for operation on deep-sea ROVs. In: 10th European conference on Power Electronics and Applications, 2-4 September 2003, Toulouse, France.

Bhangu, B and Bingham, Chris (2003) Nonlinear state-observer techniques for sensorless control of automotive PMSM's, including load-torque estimation and saliency. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

Foster, M P and Bingham, Chris and Stone, D A and Sewell, H I (2003) Observer based feedback control of 3rd order LCC resonant converters. In: European Power Electronics and Drives conference EPE 2003, 2-4 Sept 2003, Toulouse, France.

West, M J and Bingham, Chris and Schofield, N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International, 1-4 June 2003, Wisconsin, USA.

West, M J and Bingham, Chris and Schofield, N (2003) Predictive control for energy management in all/more electric vehicles with multiple energy storage units. In: Electric Machines and Drives Conference, 2003. IEMDC'03. IEEE International, Toulouse, France.

O'Sullivan, T. M. and Schofield, N. and Bingham, Chris (2003) Simulation and experimental validation of induction machine dynamics driving multi-inertial loads. In: Eleventh International Symposium on Applied Electromagnetics and Mechanics, ISEM-Versailles, 2003, Versailles, France.

Ang, Y. and Foster, M. P. and Sewell, H. I. and Bingham, Chris (2003) Stress analysis of 4th order LLCC resonant converters. In: 10th European Conference on Power Electronics and Applications EPE 2003, 2-4 September, 2003, Toulouse, France.

Jakeman, N and Bullough, W and Bingham, Chris and Mellor, Phillip (2003) A novel linear direct drive system for textile winding applications. In: European Power Electronics and Drives conference EPE 2003, 2-4 September 2003, Toulouse, France.

Bhangu, B. and Bingham, Chris and Coles, J. and Williams, C. (2002) EKFs and other nonlinear state estimation techniques for sensorless control of automotive PMSMs. In: Speedam Conference 2002, 11-14 June 2002, Ravello, Italy.

Schofield, N. and Bingham, Chris and Howe, D. (2002) Regenerative braking for all-electric and hybrid electric vehicles. In: IMechE Braking 2002 Conference, 2002, Leeds, UK.

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (2002) An experimental laboratory bench setup to study electric vehicle antilock braking / traction systems and their control. In: Vehicular Technology Conference, 2002. Proceedings. VTC 2002-Fall. 2002 IEEE 56th, Vancouver, Canada.

Wu, Y. and Schofield, N. and Bingham, Chris and Howe, D. and Stone, D. A. (2001) Design of robust current tracking control for active power filters. In: Electric Machines and Drives Conference, 2001. IEMDC 2001. IEEE International, 17-20 June 2001, MIT, USA.

Snary, P. and Bingham, Chris and Stone, D. A. (2001) Commercial electronic devices for operation in high-pressure deep-sea drive systems. In: PCIM 2001 Power Conversion and Intelligent Motion Conference, 19-21 June 2001, Nurnberg, Germany.

Sewell, H. I. and Stone, D. A. and Bingham, Chris (2001) Digital control improves three-phase induction heater performance. In: PCIM 2001 Power Conversion and Intelligent Motion Conference, 19-21 June 2001, Nurnberg, Germany.

Sewell, H. I. and Stone, D. A. and Bingham, Chris (2001) Dynamic load impedance matching for induction heater systems. In: International Seminar on Heating by Internal Sources, 12-14 Sept 2001, Padua, Italy.

Foster, M. P. and Sewell, H. I. and Stone, D. A. and Bingham, Chris (2001) Review of modelling methodologies to facilitate rapid simulation of high-order resonant converters. In: EPE2001 European Power Electronics conference, 2001, Graz, Austria.

Jakeman, N. and Mellor, P. H. and Bullough, W. A. and Bingham, Chris (2000) High performance linear actuators for demanding textile applications. In: MECHATRONICS 2000. Seventh Mechatronics Forum International Conference and Mechatronics Education Workshop, 2000, Atlanta, USA.

Wu, Z. Y. and Bingham, Chris and Howe, D. and Peel, D. (2000) QFT for the design of active magnetic bearing control systems. In: 2000 International Symposium on Magnetic Bearings, 23-25 August 2000, Martigny, Switzerland.

Duan, G. R. and Wu, Z. Y. and Bingham, Chris and Howe, D. (1999) Robust active magnetic dearing control using stabilizing dynamical compensators. In: Electric Machines and Drives, 1999. International Conference IEMD '99, 09-12 May 1999, Seattle, USA.

Khatun, P. and Bingham, Chris and Schofield, N. and Mellor, P. H. (1999) Anti-lock braking/traction control for a high-performance all-electric racing vehicle. In: PCIM Europe 1999, Power Conversion Intelligent Motion Conference, 22-24 June 1999, Nurnberg, Germany.

Atallah, K. and Kaparrelli, F. and Bingham, Chris and Mellor, P. and Howe, D. and Cossar, C. and Kjaer, P. and Gribble, J. and Miller, T. J. E. and Capewell, R. and Whitley, C. (1999) Comparison of electrical drive technologies for aircraft flight control surface actuation. In: Electrical Machines and Drives, 1999. Ninth International Conference on (Conf. Publ. No. 468), 1-3 September 1999, Canterbury, UK.

Khatun, P. and Bingham, Chris and Mellor, P. H. (1999) Discrete-time ABS/TS test facility for electric vehicles. In: 16th International Electric Vehicle Symposium and Exposition (EVS) 1999, October 1999, Beijing, China.

Wu, Z. Y. and Howe, D. and Peel, D. and Bingham, Chris (1999) Modelling, identification and control of an AMB system for the support of a high-speed flywheel. In: 5th International Symposium on Magnetic Bearing Technology, Dec 1999, Santa Barbara, USA.

Atallah, K. and Caparrelli, F. and Bingham, Chris and Schofield, N. and Howe, D. and Mellor, P. H. and Maxwell, C. and Moorhouse, D. and Whitley, C. (1999) Permanent magnet brushless drives for aircraft flight control surface actuation. In: Electrical Machines and Systems for the More Electric Aircraft (Ref. No. 1999/180), IEE Colloquium on, London, England.

Atallah, K. and Caparelli, F. and Bingham, Chris and Schofield, N. and Howe, D. and Mellor, P. H. and Maxwell, C. and Moorhouse, D. and Whitley, C. (1999) Permanent magnet brushless drives for aircraft flight control surface actuation. In: Electrical Machines and Systems for the More Electric Aircraft (Ref. No. 1999/180), IEE Colloquium on, 1999, London, England.

Raimondi, G. and McFarlane, R. and Bingham, Chris and Atallah, K. and Howe, D. and Mellor, P. H. and Capewell, R. and Whitley, C. (1998) Large electromechanical actuation systems for flight control surfaces. In: IEE Colloquium on All Electric Aircraft, 17 June 1998, London, England.

Buckley, J. M. and Atallah, K. and Bingham, Chris and Howe, D. (1998) Magnetically loaded composite for roller drives. In: New Magnetic Materials - Bonded Iron, Lamination Steels, Sintered Iron and Permanent Magnets (Digest NMo. 1998/259), IEE Colloquium on, 28 May 1998, IEE Savoy Place, London.

Musgrave, D. and Stone, D. A. and Bingham, Chris and Howe, D. (1998) Modelling and control of an electrically actuated vibratory system. In: ICEM'98 International conference on Electrical Machines, 2-4 Sept 1998, Istanbul, Turkey.

Bingham, Chris and Atallah, K. and Mellor, P. H. and Buckley, J. M. (1997) Reconfigurable control of brushless AC composite roller systems. In: PCIM Europe 1997, Power Conversion Intelligent Motion Conference, June 10-12 1997, Nurnberg, Germany.

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Howe, D. and Peel, D. (1996) Experimental non-linear control of an electromagnetic vibratory pile-driver with DSP based implementation. In: EPE Chapter Symposium on Electric Drive Design and Applications, June 1996, Nancy, France.

Bingham, Chris and Mellor, P. H. and Howe, D. (1996) Coprime factorisation techniques for multi-axis motion control. In: PCIM 96 Power conversion and intelligent motion conference, 21-23 May 1996, Nurnberg, Germany.

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Peel, D. (1996) DSP based non-linear control of an electrically actuated vibratory pile-driver. In: Symposium on Industrial Drives, Power Quality, Traction Systems, 5-7 June 1996, Italy.

Bingham, Chris and Stone, D. A. and Schofield, N. S. and Peel, D. (1996) Non-linear control of an electromagnetic vibratory pile-driver with DSP based implementation. In: 1996 ICEM International Conference on Electrical Machines, Sept 10-12 1996, Spain.

Buckley, J. M. and Atallah, K. and Bingham, Chris and Mellor, P. H. (1996) Use of composites in self-powered roller technology. In: ECCM-7 Seventh European Conference on Composite Materials, 14-16 May 1996, London UK.

Bingham, Chris and White, B. A. (1993) Hierarchical variable structure control for aerospace systems. In: IASTED International Conference - Modelling, Identification and Control, 1993, Innsbruck, Austria.

Bingham, Chris and White, B. A. (1992) Variable structure switched gain stabilisation for systems with saturation non-linearities. In: ICARCV '92. Second International Conference on Automation, Robotics and Computer Vision, July 1992, Nanyang University, Singapore.

Book or Monograph

Stewart, Paul and Bingham, Chris (2017) Electrical power and energy systems for transportation applications. Energies . MDPI. ISBN 9783038422075, 9783038422426

This list was generated on Wed Nov 22 05:45:59 2017 GMT.